FB SeriesHYUNDAI WIA Vertical Machining Center

The Vertical Machining Center FB Series, designed by Hyundai WIA with years of expertise and the latest technology, is a heavy duty cutting machine with high precision and productivity.

Technical Leader

510/20 600/23.6 8,000 4,500 4,500 8,000 8,000 8,000 20 24 30 (mm/″) (mm/″)

(287N.m) (730N.m) (901N.m) (512N.m) (532N.m) (657N.m) BT40 BT50 (Tool) (Tool) (Tool)

(211.7lbf.ft) (538.4lbf.ft) (664.5lbf.ft) (377.6lbf.ft) (392.4lbf.ft) (484.6lbf.ft)

Y-AxisStroke Belt Gear Taper Magazine

● ● ○ ● ● ○

● ● ○ ○ ○ ● ● ○

MODEL

F510B

F600B

●:Standard○:Option

High tech Vertical Machining Center for High Precision Heavy Duty Cutting

FB Series● High precision main spindle designed with Angular Contact Ball Bearings

● High power/torque main spindle for superb heavy duty cutting

● Gear driven main spindle for high power and high torque

● Box guideways for exceptional traveling during heavy duty cutting

● Latest Servo ATC for highly efficient tool changing

500(19.6″)

150(5.9″)

70(2.7″)

70(2.7″)

1,060(41.7″)

500(19.6″)

800 kg (1,764 lb)

◉TableSize(X/Y axis) : 1,200/500 mm (47.2″/19.6″)

635(25″)

01 F510B Basic FeaturesExcellent Heavy Duty Cutting Capability & Productivity Vertical Machining Center FB Series

AllAxesBoxGuidewayAll Axes box guideways for efficient traveling for heavy duty cutting.

DoubleAnchoredBallscrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.

The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.

DirectlyCoupledServoMotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.

03

02

01

Table&MachiningArea

04+

05

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

01

03

02

BeltTypeSpindle(F510B)The F510B is designed with a belt type spindle. This allows drastic decrease in noise during machining operations and provides easy maintenance.

◉Travel(X/Y/Z axis) : 1,100/510/635 mm (43.3″/20″/25″)

◉SpindleSpeed(rpm) : 8,000 Belt [8,000 Gear] rpm

◉SpindlePowerOutput(Max./Cont.) : 15/15 [15/15] kW (20/20 [20/20] HP)

◉SpindleTorque(Max./Cont.)) : 287/143 [512/375] N.m (211.7/105.5 [377.6/276.6] lbf.ft)

Basic Features

02 F600B Basic FeaturesHigh Speed & Productivity Vertical Machining Center

FB Series

4SlidewayY-AxisStructureThe Y-axis on the F600B is designed with 4 slideways. This reduces the degree of displacement from sagging.

Table&MachiningArea 03

02

01

AllAxesBoxGuidewayBox guideway allows even distribution of force on the guideway surface, resulting in high rigidity and stable feeding. This provides the background for high quality heavy duty cutting.

600(23.6″)

600(23.6″)

150(5.9″)

225(8.5″)

1,150(45.2″)

225(8.5″)

600(23.6″)1,300 kg (2,866 lb)

◉TableSize(X/Y axis) : 1,600/600 mm (63″/23.6″) [When applying JIG - Y-axis : 580 mm(22.8″)]

DoubleAnchoredBallscrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.

The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.

DirectlyCoupledServoMotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.

06+

07

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

Basic Features

01

03

02

GearDrivenSpindleF600B is designed with a gear driven spindle which allows high torque at low rpm and stable machining at high rpm.

◉Travel(X/Y/Z axis) : 1,150/600/600 mm (45.3″/23.6″/23.6″)

◉SpindleSpeed(rpm) : 4,500 [4,500] [8,000] [8,000] rpm ◉SpindleDrivingMethod : Gear

◉SpindlePowerOutput(Max./Cont.) : 15/11 [18.5/15] [15/11] [18.5/15] kW (20/15 [24.8/20] [20/15] [24.8/20] HP)

◉SpindleTorque(Max./Cont.) : 730/535 [901/730] [532/390] [657/532] N.m

(538.4/394.6 [664.5/538.4] [392.4/287.6] [484.6/392.4] lbf.ft)

BeltTypeSpindle(F510B)The F510B is designed with a belt type spindle. This allows drastic decrease in noise during machining operations and provides easy maintenance.

By using ultra precision angular ball bearings, fast acc/deceleration of spindle is achieved.

The spindle head is designed to minimize the heat displacement, and with the use of a hydraulic tool locking system the machining stability is improved.

ThroughSpindleCoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.

F600BAllAxes:Standard

F510B8,000rpm(Belt):Option8,000rpm(Gear):Standard20bar/30bar/70bar

(290psi/435psi/1,015psi)

03 High Precision SpindleHigh Accuracy & Excellent PerformanceVertical Machining CenterFB Series

2StepGearDrivenSpindle(F600B)F600B spindle features cylindrical roller bearings, ensuring maximum torque and heavy duty cutting abilities.The 2 step gear driven spindle allows high torque during low speed operations and stable machining during high speed operations.

SpindleCoolingThe spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.

08+

09

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

Spindle

Power (kW[HP])

Spindle Speed (r/min)

F510B 8,000rpm Belt (Std.) F510B 8,000rpm Gear (Opt.)

F600B 4,500rpm Gear (Std.) F600B 8,000rpm Gear (Opt.)

F600B 4,500rpm Gear (Opt.) F600B 8,000rpm Gear (Opt.)

Spindle Speed (r/min)

Spindle Speed (r/min) Spindle Speed (r/min)

Spindle Speed (r/min) Spindle Speed (r/min)

Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])

Power (kW[HP]) Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])

Power (kW[HP]) Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])

15[20]

11[14.7]

0 280 1,118 1,500

1,285

7.5[10]

0

0 60 269 1,075 1,509 6,034 8,000

60 269 1,075 1,509 6,034 8,000

0

00

20 196 782 1,125 4,500

20 196 782 1,125 4,500

500 750 6,000 8,000 6,000 8,000

15kW [20HP] (S3, 30min)

11kW [14.7HP] (Cont.)

287N∙m [211.6lbf∙ft] (S3, 30min)

143N.m [105.4lbf.ft] (Cont.)

15[20]

13[17.4]

11[14.7]

9[12]

512[377.6]

375[276.5]

95[70]

70[51.6]

8.9[6.5]6.6[4.8]

390.3[287.8]

287[211.6]

143[105.4]

95[70]

18[13.2]9[6.6]

512N∙m [377.6lbf∙ft] (S3, 30min)

375N∙m [276.5lbf∙ft] (Cont.)

18.5[24.8]

15[20]

901[664.5]730[538.4]535[394.6]

901N∙m [664.5lbf∙ft] (S3, 30min)

730N∙m [538.4lbf∙ft] (S3, 30min)

18.5kW [24.8HP] (S3, 30min)

15kW [20HP] (S3, 30min)15

[20]

18.5[24.8]

532[392.3]

657[484.5]

390[287.6]

657N∙m [484.5lbf∙ft] (S3, 30min)

532N∙m [392.3lbf∙ft] (S3, 30min)

18.5kW [24.8HP] (S3, 30min)

15kW [20HP] (S3, 30min)

15[20]

11[14.7]

730[538.4]

901[664.5]

535[394.5]

730N∙m [538.4lbf∙ft] (S3, 30min)

535N∙m [394.5lbf∙ft] (Cont.)

15kW [20HP] (S3, 30min)

11kW [14.7HP] (Cont.)15

[20]

11[14.7]

532[392.3]390[287.6]

532N∙m [392.3lbf∙ft] (S3, 30min)

390N∙m [287.6lbf∙ft] (Cont.)

15kW [20.1HP] (S3, 30min)

11kW [14.7HP] (Cont.)

15kW [20HP] (S3, 30min)

11kW [14.7HP] (Cont.)

SpindleOutput/TorqueDiagram

SpindleCoolingStd.

SpindleCoolingStd.

SpindleCoolingStd.

SpindleCoolingOpt.

SpindleCoolingStd.

SpindleCoolingStd.

04 ATC & MagazineHigh Productivity Achieved with Rigidity andAccuracy in MachiningFB Series

F510B F600B

◉No. of Tool : 24 [30] EA

◉Tool Shank : BT40◉Max. Tool Dia. (W.T/W.O) :

Ø90/Ø150 (Ø3.5″/Ø5.9″)◉Max. Tool Weight : 8 kg (17.6 lb)

◉Tool Selection Method : Random

◉No. of Tool : 20 [30] EA

◉Tool Shank : BT50◉Max. Tool Dia. (W.T/W.O) :

Ø125/Ø240 (Ø4.9″/Ø9.4″)◉Max. Tool Weight : 20 kg (44 lb)

◉Tool Selection Method : Random

Magazine(F510B)The tool magazine holds 24 tools as standard and 30 tools as an option.Due to the wider selection of tools and the random tool selection method, tool change time has been improved.

ServoATCHigh precision compound cam Twin Arm Servo ATC offers fast and accurate tool change, reducing non-cutting time compared to the previous model.

◉ATCSpeedImprovement(F510B)

25%reduction

Before

After

2.0 sec

1.5sec

Tool to Tool

7.7%reduction

Before

After

5.2 sec

4.8sec

Chip to Chip

30 Tool Magazine (F510B)

30 Tool Magazine (F600B)

10+

11

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

ATC & Magazine

05 Machining CapabilityExcellent Performance, High AccuracyVertical Machining CenterFB Series

❖ The above results might be different by types of processing circumstances.

FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting widthCutting speedSpindle motorFeed rateChip quantity

Ø160 (Ø6.3″) x 10F7 mm (0.27″)100 mm (3.94″)160 mm/min (6.3 ipm)15/11 kW (20/14.7 kW)230 mm/min (9.05 ipm)403 cc/min

END MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting speedSpindle motorFeed rateChip quantity

Ø50 (Ø1.97″)35 mm (1.38″)120 mm/min (4.72 ipm)15/11 kW (20/14.7 kW)230 mm/min (9.05 ipm)403 cc/min

F510B F600B FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity

Ø80 (Ø3.15″) x 6F5.5 mm (0.22″)70 mm (2.76″)236 mm/min (9.3 ipm)1,137 r/min0.99 mm/rev (0.039″/rev)430 cc/min

DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉

Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity

Ø43 (Ø1.7″)43 mm (1.7″)27 mm/min (1.06 ipm)199 r/min0.38 mm/rev (0.014″/rev)109 cc/min

TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉

Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate

M24 x P4.542 mm (1.65″)7 mm/min (0.27 ipm)53 r/min4.5 mm/rev (0.17″/rev)

Sample Workpieces

Machining

12+

13

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

06 Smart SystemSoftware for smart operating and machiningFB Series

Intelligent Machining

Machine Monitoring

High Precision

High Productivity Energy Savin

g

HW-TM | HW-MCS | HW-A

FC

HW-TOM | HW-WCM

HW-ESS

User Friendly

HW-MMSHW-TDC | HW

-WARM

UP

HYUNDAI WIA Smart System for Vertical Machining Center

User Convenience

HW-eDNC

HW-MCG

Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.

HW-eDNCHYUNDAIWIAethernetDirectNumericalControl

This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.

HW-MMSHYUNDAIWIAMachineMonitoringSystem

This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.

14+

15

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

HYUNDAI WIA Smart System

USBPortConvenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.(HWFSeries,S828D:Standard/F32i-A:Nonapplicable)

HW-TDCHYUNDAIWIAThermalDisplacementCompensation

Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.

HW-ESSHYUNDAIWIAEnergySavingSystem

An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.

(FANUC)

HW-TMHYUNDAIWIAToolMonitoring

A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.

(FANUC)

HW-MCGHYUNDAIWIAMachineGuidance

Software that offers operation, maintenance, management monitoring and various user friendly features.

(FANUC)

HW-WARMUPHYUNDAIWIAWARMingUp

Warm-up software that measures main spindle halt and offers system warm-up time automatically.

HW-TOMHYUNDAIWIAToolOffsetMeasurement

User friendly GUI software that indicates tool length, diameter, and damage (H/Wexcluded)

(FANUC)

HW-WCMHYUNDAIWIAWorkCoordinateMeasurement

User-friendly GUI software that measures work coordinates (H/Wexcluded)

(FANUC)

HW-AFCHYUNDAIWIAAdaptiveFeedControl

Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.

(FANUC)

HW-MCSHYUNDAIWIAMachiningConditionSelection

Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)

(FANUC)

User ConvenienceVarious Devices for User Convenience

HydraulicSupplyUnitInstead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 70 bar (1,015 psi), maximizing the clamping force on the fixture.

NCRotaryTableThe NCRT makes it possible to machine up to 5-axis. Various types of products can be machined.

U-CenterWith U-Center, both external and internal diameter turning become possible, allowing for a wide range of variety in products.

Hydraulic Device

Precision Device

07FB Series

Measuring Device

TouchSensorWorkpiece coordinate values can be set automatically using the optional spindle probe.

TLM-Laser&TouchTool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool attrition and detect broken tools.

Laser Type

Touch Type

16+

17

Chip Disposal Process (F510B)

Chip Conveyor Front (Left)

•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip)

•Scraper Type : Convenient for shortly cut chips.. (Short Chip)•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle.

(AL Chip)

Timely and effective disposal of chips will enhance productivity as well as the working environment.

Chip Conveyor

Optional

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

Std. Coolant (Nozzle)

Bed Flushing Coolant

Through Spindle Coolant

(20/30/70 bar [290/435/1,015 psi])

Shower Coolant

Gun Coolant

Side Oil Hole Coolant

Standard

Standard

Option

Option

Option

Option

Coolant Unit

Chip Conveyor Rear (Left)

F510B F600B ○ ○ ○ ○ ○ ○ ○ ○

● ● ☆ ☆ ☆ ☆

● ● ○ ○ ○ ○ ● ● ○ ○ ● ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ - ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○

● -

○ ○ ○ ○ ☆ ☆ ☆ ☆

Tool Offset Measurement (HW-TOM) : FANUCWork Coordinate Measurement (HW-WCM) : FANUCMachining Condition Selection (HW-MCS) : FANUCAdaptive Feed Control (HW-AFC) : FANUCETC Tool BoxCustomized ColorCAD & CAM Software Electric DeviceCall LightCall LightCall Light & BuzzerWork LightElectric Cabinet LightDoor Inter-LockRemote MPG3 Axis MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit BreakerAVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffBack up Module for Black outMeasuring Device

Air Zero

Work Measuring DeviceTLM(Marposs/Renishaw/Bloom)Tool Broken Detective DeviceLinear ScaleCoolant Level Sensor (Only for Chip Conveyor)EnviornmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation

Auto Door

Auto Shutter (Only for Automatic System)Sub O/P

NC Rotary TableI/F

Control of Additional Axis

External M Code 4eaAutomation Interface

I/O Extension (In & Out)

Hyd. Device

Std. Hyd. Unit

Fixture Hyd. Unit

Need Munsel No.

1 Color : ■3 Color : ■■■3 Color : ■■■B

LED TypeLED TypeDigitalDigitalDigital6 EA9EA

30kVA

TACOSMC

TouchLaser

X/Y/Z Axis

Std.High Speed

SingleChannel1Axis2Axis

16Contact32Contact

70bar (1,015 psi) / 11ℓ(2.9 gal)45bar (652.7 psi)70bar (1,015 psi)100bar (1,450 psi)Customized

Standard&Optional

4,500rpm (15/11kW)4,500rpm (18.5/15kW)8,000rpm (15/11kW)8,000rpm (15/11kW)8,000rpm (18.5/15kW)

Spindle Cooling System

ATC

ATC Extension

Tool Shank Type

U-Center

Stud Bolt Collet Change

Table & ColumnAPCTap Type PalletT-Slot PalletNC Rotary Table

High Column

Coolant SystemStd. Coolant (Nozzle)Bed Flushing Coolant

Through spindle coolant*

Top Cover (Thru coolant applied when necessary)Shower CoolantGun CoolantSide Oil Hole CoolantAir GunCutting Air BlowTool Measuring Air Blow (Only for TLM)Air Blow for AutomationThru MQL Device (Without MQL)Coolant ChillerPower Coolant System (For Automation)Chip Disposal

Coolant Tank

Intenal Screw Chip ConveyorChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)

Chip Wagon

Safety DeviceTotal Splash GuardS/WMachine Guidance (HW-MCG) : FANUCTool Monitoring (HW-TM) : FANUCDNC Software (HW-eDNC)Spindle Heat Distortion Compensation (HW-TDC)Spindle Warm up Function (HW-WARMUP)Energy Saving System (HW-ESS) : FANUCMachine Monitoring System (HW-MMS)

GEAR (2STEP)GEARBELTGEARGEAR (2STEP)BELTGEAR

202430BT40CAT40BT50CAT50D'andrea45°60°90°

250mm (9.8″)300mm (11.8″)

20bar (290 psi)30bar (435 psi),20ℓ(5.3 gal)70bar (1,015 psi), 15ℓ(4 gal)70bar (1,015 psi), 30ℓ(7.9 gal)

400ℓ(105.7 gal)450ℓ(118.9 gal)

Left(Rear)Left(Left)

Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized

Spindle ETC S/W

● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable

F510B F600B - ● - ○ ● - ○ ○ - ○ ○ - ● ● - ● ● - ○ ○ ● - ○ - - ● - ○ ☆ ☆ ● ● ○ ○ ○ ○ - - - - ● ● ☆ ☆ - ○ - - ● ● - - ○ ○

○ ○

○ ○

○ ○

● ○ ○ ○ ○ ○ ☆ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ - ● ● - - ● ○ ○ ○ - ☆ ☆

○ ○

○ ○

○ ○

○ ○

☆ ☆ ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆

Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.

SPECIFICATIONS

unit : mm(in)ExternalDimensions

F510B

18+

19

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

SPECIFICATIONS

2830

(111

.4)

2475

(97.

4)

2680 (105.5)

3248 (127.9)

51(2)

718

(28.

3)10

57 (4

1.6)

33(1.3)

2800 (110.2)

3255 (128.1)

455(17.9)

388

(15.

3)19

00 (7

4.8)

ELEC. BOXATC MAG.

SPINDLE HEAD

OP BOX

CABLE VEYOR

1910

(75.

2)20

5(8

.1)

340

(13.

4)

233

(9.2

)17

0(6

.7)

2583

(101

.7)

OP

T.30

T

ATC MAG.(OPT.30T)

130(5.1)

998 (39.1)

1200

(47.

2)

918.1 (36.1)

1200

(47.

2)Rear Chip Conveyor Left Side Chip Conveyor

ATC MAG.

OP BOX

ATC MAG.(OPT.30T)

Rear Chip Conveyor

1870 (73.6)1020 (40.2)

3525 (138.8)

2890 (113.8)

2807

(110

.5) :

20

Tool

2895

(114

) : 3

0 To

ol

1200

(47.

2)

1210

(47.

6)

3240

(27.

6)

312

(12.

3)

72(2.8)

3720 (146.5)

3792 (149.3)

370

(14.

6)15

75 (6

2)

2257

(88.

9)

3240

(27.

6)

2830

(111

.4)

2475

(97.

4)

2680 (105.5)

3248 (127.9)

51(2)

718

(28.

3)10

57 (4

1.6)

33(1.3)

2800 (110.2)

3255 (128.1)

455(17.9)

388

(15.

3)19

00 (7

4.8)

ELEC. BOXATC MAG.

SPINDLE HEAD

OP BOX

CABLE VEYOR

1910

(75.

2)20

5(8

.1)

340

(13.

4)

233

(9.2

)17

0(6

.7)

2583

(101

.7)

OP

T.30

T

ATC MAG.(OPT.30T)

130(5.1)

998 (39.1)

1200

(47.

2)

918.1 (36.1)

1200

(47.

2)

Rear Chip Conveyor Left Side Chip Conveyor

ATC MAG.

OP BOX

ATC MAG.(OPT.30T)

Rear Chip Conveyor

1870 (73.6)1020 (40.2)

3525 (138.8)

2890 (113.8)

2807

(110

.5) :

20

Tool

2895

(114

) : 3

0 To

ol

1200

(47.

2)

1210

(47.

6)

3240

(27.

6)

312

(12.

3)

72(2.8)

3720 (146.5)

3792 (149.3)

370

(14.

6)15

75 (6

2)

2257

(88.

9)

3240

(27.

6)

unit : mm(in)ExternalDimensions

F600B

SPECIFICATIONS

2830

(111

.4)

2475

(97.

4)

2680 (105.5)

3248 (127.9)

51(2)

718

(28.

3)10

57 (4

1.6)

33(1.3)

2800 (110.2)

3255 (128.1)

455(17.9)

388

(15.

3)19

00 (7

4.8)

ELEC. BOXATC MAG.

SPINDLE HEAD

OP BOX

CABLE VEYOR

1910

(75.

2)20

5(8

.1)

340

(13.

4)

233

(9.2

)17

0(6

.7)

2583

(101

.7)

OP

T.30

TATC MAG.(OPT.30T)

130(5.1)

998 (39.1)

1200

(47.

2)

918.1 (36.1)

1200

(47.

2)

Rear Chip Conveyor Left Side Chip Conveyor

ATC MAG.

OP BOX

ATC MAG.(OPT.30T)

Rear Chip Conveyor

1870 (73.6)1020 (40.2)

3525 (138.8)

2890 (113.8)

2807

(110

.5) :

20

Tool

2895

(114

) : 3

0 To

ol

1200

(47.

2)

1210

(47.

6)

3240

(27.

6)

312

(12.

3)

72(2.8)

3720 (146.5)

3792 (149.3)

370

(14.

6)15

75 (6

2)

2257

(88.

9)

3240

(27.

6)

2830

(111

.4)

2475

(97.

4)

2680 (105.5)

3248 (127.9)

51(2)

718

(28.

3)10

57 (4

1.6)

33(1.3)

2800 (110.2)

3255 (128.1)

455(17.9)

388

(15.

3)19

00 (7

4.8)

ELEC. BOXATC MAG.

SPINDLE HEAD

OP BOX

CABLE VEYOR

1910

(75.

2)20

5(8

.1)

340

(13.

4)

233

(9.2

)17

0(6

.7)

2583

(101

.7)

OP

T.30

T

ATC MAG.(OPT.30T)

130(5.1)

998 (39.1)

1200

(47.

2)

918.1 (36.1)

1200

(47.

2)

Rear Chip Conveyor Left Side Chip Conveyor

ATC MAG.

OP BOX

ATC MAG.(OPT.30T)

Rear Chip Conveyor

1870 (73.6)1020 (40.2)

3525 (138.8)

2890 (113.8)

2807

(110

.5) :

20

Tool

2895

(114

) : 3

0 To

ol

1200

(47.

2)

1210

(47.

6)

3240

(27.

6)

312

(12.

3)

72(2.8)

3720 (146.5)

3792 (149.3)37

0(1

4.6)

1575

(62)

2257

(88.

9)

3240

(27.

6)

205 (8)

264.8(10.4)

141.

3(5

.6)

600

(23.

6)

300

(11.

8)30

0 (1

1.8)

(Stro

ke)

70(2.7)

70(2.7)

5(0

.2)

105

(4)

100

(3.9

)10

0(3

.9)

580

(22.

8)

770

(30.

3)5

(0.2

)

170

(6.7

)20

(0.8

)

100

(3.9

)10

0(3

.9)

75 (2.9

)

50 (2)

5(0

.2)

50 (2)

100

(3.9

)10

0(3

.9)

500

(19.

7)

100

(3.9

)10

0(3

.9)

1060 (41.7)

1200 (47.2)

225(8.8)

225(8.8)

575 (22.6) 575 (22.6)

1150(45.3)

1600 (63)

(Stroke)

Ø458

(Ø18)

Ø95(Ø3.7)

Ø125(Ø4.9)

Ø600

(Ø23.6)

Ø553(Ø21.7)

102

(4)

unit : mm(in)TableDimensions

F510B

F600B20+

21

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

SPECIFICATIONS

unit : mm(in)

Ø5.

7(Ø

0.22

)

Ø8

(0.3

15)

16(0.63)

7(0.276)

P8

Ø3

(Ø0.

11)

Ø5

(Ø0.

19)

11.5 (0.45)3

(0.11)

P5

BT40

BT50

Ø63

(Ø2.

48)

65.4(2.57)6 (0.23)

27(1.06)

2(0.06)

Ø44

.45

(Ø1.

75)

35(1.37)29(1.14)

Ø15

(Ø0.

59)

60°

45°

16.6(0.65)

7/24

M16

Ø10

(Ø0.

39)

10(0.39)

22.6(0.88)

16.1

(0.6

3)

35.4(1.39)

25.7

(1.0

1)

Ø10

0 (Ø

3.93

)

Ø69

.85

(Ø2.

75)

Ø17

(Ø0.

66)

Ø23

(Ø0.

91)

60°

38(1.49)

23.2 (0.91)

10 (0.39)

45(1.77)

101.8 (4)

7/24

M24

35(1.37)

15(0.59)

45°

3 (0.11)

60°CAT-50

Ø3

(0.1

18)

Ø6.

2 (0

.244

)

Ø5

(0.0

97)

Ø8

(0.3

15)

2. R0.4

1BP8

1BP8

11.5(0.453)

16(0.63)

7(0.276)

3(0.118)

1BP5

25(0.983)

22.5(0.888)

16.3

83(0

.645

)

60°

60°

45°

CAT40

Ø63

.5 (2

.5)

15 (0

.59)

68.25 (2.687)15.8 (0.625)3.2 (0.125)

7/24

32.15(1.266)

5/8″-11

Ø44

.5 (1

.75)

101.8 (4.000)

Ø69

.8(Ø

2.75

0)

Ø98

.4 (3

.875

)

19.05 (0.750)45

(1.772)

37.5(1.478)

35.1(1.383)

25.8

(1.0

15)1″-8UNC

7/24

23 (0

.906

)

60°3.2(0.125) (CAT50)

45°

Ø5.

7(Ø

0.22

)

Ø8

(0.3

15)

16(0.63)

7(0.276)

P8

Ø3

(Ø0.

11)

Ø5

(Ø0.

19)

11.5 (0.45)3

(0.11)

P5

BT40

BT50

Ø63

(Ø2.

48)

65.4(2.57)6 (0.23)

27(1.06)

2(0.06)

Ø44

.45

(Ø1.

75)

35(1.37)29(1.14)

Ø15

(Ø0.

59)

60°

45°

16.6(0.65)

7/24

M16

Ø10

(Ø0.

39)

10(0.39)

22.6(0.88)

16.1

(0.6

3)

35.4(1.39)

25.7

(1.0

1)

Ø10

0 (Ø

3.93

)

Ø69

.85

(Ø2.

75)

Ø17

(Ø0.

66)

Ø23

(Ø0.

91)

60°

38(1.49)

23.2 (0.91)

10 (0.39)

45(1.77)

101.8 (4)

7/24

M24

35(1.37)

15(0.59)

45°

3 (0.11)

60°CAT-50

Ø3

(0.1

18)

Ø6.

2 (0

.244

)

Ø5

(0.0

97)

Ø8

(0.3

15)

2. R0.4

1BP8

1BP8

11.5(0.453)

16(0.63)

7(0.276)

3(0.118)

1BP5

25(0.983)

22.5(0.888)

16.3

83(0

.645

)

60°

60°

45°

CAT40

Ø63

.5 (2

.5)

15 (0

.59)

68.25 (2.687)15.8 (0.625)3.2 (0.125)

7/24

32.15(1.266)

5/8″-11

Ø44

.5 (1

.75)

101.8 (4.000)

Ø69

.8(Ø

2.75

0)

Ø98

.4 (3

.875

)

19.05 (0.750)45

(1.772)

37.5(1.478)

35.1(1.383)

25.8

(1.0

15)1″-8UNC

7/24

23 (0

.906

)

60°3.2(0.125) (CAT50)

45°

F510B

F600B

ToolShank

SPECIFICATIONS

F510B

F600B

Specifications are subject to change without notice for improvement.

Table Size

Maximum Load Capacity

Table Change Time

Change Method

Table Driving Method

Spindle Taper

Spindle RPM

Spindle Power Output

(Max./Cont.)

Spindle Torque

(Max./Cont.)

Spindle Driving Method

Travel (X/Y/Z)

Distance from Table Surface to SP

Distance from Column to SP. center

Rapid Traverse Rate (X/Y/Z)

Slide Type

Number of Tools

Tool Shank

Max. Tool Dia. (W.T / W.O)

Max. Tool Length

Max. Tool Weight

Tool Selection Method

Tool Change Time T-T

C-C

Coolant Tank

Lubricating Tank

Hydraulic Tank

Air Consumption (0.5MPa)

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

TABlE

FEED

TANkCApACITY

SpINDlE

ATC

MACHINE

NC

poWErSUpplY

mm(in)

kg(lb)

sec

-

-

-

r/min

kW(HP)

N.m(lbf.ft)

-

mm(in)

mm(in)

mm(in)

m/min(ipm)

-

EA

-

mm(in)

mm(in)

kg(lb)

-

sec

sec

ℓ(gal)

ℓ(gal)

ℓ(gal)

ℓ/min(gal)

KVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

ITEM F510B F600B

Specifications [ ] : Option

1,200×500 (47.2″×19.7″)

800 (1,764)

-

-

-

NT #40

8,000 [8,000]

15/11 (20/15) [15/11 (20/15)]

287/143(211.6/105.4)

[512/375(377.6/276.5)]

BELT [GEAR]

1,100/510/635 (43.3″/20.1″/25″)

150~785 (5.9″~30.9″)

615 (24.2″)

30/30/24 (1,181/1,181/944.8)

BOX GUIDE

24 [30]

BT40 [CAT40]

Ø90/Ø150 (3.5″/5.9″)

300 (11.8″)

8 (17.6)

RANDOM

1.5

4.8

485 (128.1)

2 (0.5)

11 (2.9)

250 (66)

24

OVER 25

220/60 (200/50)

2,910×2,690 (114.6″×105.9″)

2,815 (110.8″)

7,700 (16,976)

HYUNDAI WIA FANUC i Series

1,600×600 (63″×23.6″)

{When applying jig, Y-axis : 580 (22.8″)}

1,000 (2,205)

-

-

-

NT #50

4,500 [4500] [8,000] [8,000]

15/11(20/15) [18.5/15(25/20)]

[15/11(20/15)] [18.5/15(25/20)]

730/535(538.4/394.5) [901/730(664.5/538.4)]

[532/390(392.4/287.6)] [657/532(484.5/392.3)]

GEAR

1,150/600/600 (45.3″/23.6″/23.6″)

180~780 (7.1″~30.7″)

620 (24.4″)

24/24/24 (944.8/944.8/944.8)

BOX GUIDE

20 [30]

BT50 [CAT50]

Ø125/Ø240 (4.9″/9.4″)

300 (11.8″)

20 (44.1)

RANDOM

3.4

6.8

400 (105.7)

3 (0.8)

-

400 (105.6)

28

OVER 25

220/60 (200/50)

3,720×4,155 (146.5″×163.6″)

3,240 (127.6″)

10,500 (23,149)

HYUNDAI WIA FANUC i Series [F 31i-A]

22+

23

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

SPECIFICATIONS

Figures in inch are converted from metric values.Design and specifications are subject to change without notice.

CONTROLLER

HYUNDAIWIAFANUCiSeriesAxis control / Display unitControlled axis

Simultaneous controllable axis

Least input incrementLeast command incrementInch/Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo off

Backlash compensation

Position switchStored pitch error compensationLCD/MDIoperationAutomatic operation (memory)MDI operationDNC operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockHandle interruptFeed functionsManual jog feedManual handle feed-rateFeed commandFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acceleration/decelerationAuto corner overrideprogram input & Interpolation functionsLabel SkipControl in/out

Nano Interpolation

Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point returnReference point return check2nd, 3rd, 4th Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsProgram numberAbsolute/incremental commandDecimal point inputPlane selectionWork coordinate system settingWork coordinate presetAdditional work coordinate systemManual absoluteProgrammable data inputSub program callCustom macroAddition to custom macro common variablesCircular interpolationCanned cycle

3-axes (X, Y, Z)3-axes(G00 & G01 : 3-axes, G02 & G03 : 2-axes)X, Y, Z axis : 0.001 mm (0.0001″)X, Y, Z axis : 0.001 mm (0.0001″)G20 / G21Each axis / All axesAll axes

Over Trable

+/- 0~9999 pulse(rapid traverse & cutting feed)

8.4″ color LCD

Need DNC Program Sequence, Program

Dry run, program check

Rapid, Jog, handlex1, x10, x100F code feedrate direct command0~200% (10% Unit)0~5,000 mm/min (197 ipm)F0, F25%, F50%, F100%

G62

Positioning/Linear/Circular(G00/G01/G02/G03)G61 / G09G04, 0~9999.9999sec

G33

G28G27G30M00, M01 / M02, M30EIA RS-244/ISO 840 (Automatic recognition)1 EA+/- 9999.9999 (+/- 8 digits)O4 /N8G90 / G91

G17, G18, G19G52~G59G50.3G54.1 P1 ~P48 (48 pairs)"On" fixedG1010 Step

#100 ~ #199 , #500 ~ #999G02, G03G73, G74, G76, G80 ~ G89

program input & Interpolation functionsOptional chamfering/corner RSkip functionHigh speed Skip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror imageSingle direction positioning

External data input

Cylindrical interpolationAI advanced preview controlPolar coordinate commandSub / Spindle functionsMiscellaneous functionMiscellaneous function lockSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length measurementTool length compensationTool offset amountTool offset pairsTool life managementData input / output & Editing functionsReader/Puncher interfaceMemory card input/outputUSB Input/OutputEmbeded EthernetPart program storage lengthRegistered programsMemory lockBack ground editingExtended part program editingSetting, display, diagnosisSelf-diagnosis functionHistory displayHelp functionRun hour/Parts count displayActual cutting feedrate displaySpindle/Servo setting screenMulti-language displayDynamic switching display languageLCD Screen Save

optionSub Axis ControlTwo way pitch error compensationManual Guide 0iManual Guide iDynamic graphic displayOptional block skip addAI contour control(AICC) AI contour control(AICC) ⅡNano SmoothingTool Management FunctionProtection of data at 8 levelsData serverFASTethernetPart program storage length Expand

G31

G68, G69G50.1, G51.1G60Tool offset/message/machine zero point shift

G5.1 (20 Block)G15, G16

M3 digits

S5 digits, binary output50%~120% (10% unit)

Max. T8 digitsG40~G42Z-Axis INPUT CG43, G44, G49G45~G48 (+/- 6 digits)400 pairs

RS232C

100Mbps1280m (512 Kbyte)400 ea

Copy, move, change of NC program

Alarm & operator message

Selection of 5 optional language

Screen saver

4, 5 Axes

8.4″ color LCD10.4″ color LCD (Interactive Program)

9 ea (Application can be limited)40 Block200 Block

1GB100 Mbps (Option board is required)5120m (2 Mbyte)

FANUC31i-A(F600B)Axis control / Display unitControlled axesSimultaneous controllable axesLeast input incrementLeast command incrementInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Mirror imageFollow-upServo off

Backlash compensation

Position switchPitch error compensationStored pitch error compensation*LCD/MDIoperationAutomatic operation (memory)MDI operationResearch FunctionProgram restartDry run,Single BlockBuffer registerMemory Card DNC operationFeed functionsManual jog feedManual handle feed-rateFeed commandFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acce/decelerationprogram input & Interpolation functionsLabel SkipControl in/out

Interpolation function

Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point returnReference point return check2nd, Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsProgram number/Sequence numberAbsolute/incremental commandDecimal point inputPlane selectionWork coordinate presetManual absoluteProgrammable data inputSub program callCustom macroAI Contour Control(AICC) ICircular interpolationCanned cycleOptional chamfering/corner RSkip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror image

3-axes (X, Y, Z) 3-axes (G00 & G01 : 3-axes, G02 & G03 : 2-axes)X, Y, Z axis : 0.001 mm (0.0001″)X, Y, Z axis : 0.001 mm (0.0001″)G20 / G21Each axis / All axesAll axes

+/- 0~9999 pulse(rapid traverse & cutting feed)

10.4″ color LCD

Sequence, Program

Rapid, Jog, handlex1, x10, x100F code feedrate direct command0~200% (10% Unit)0~5,000mm/min (197ipm)F0, F25%, F50%, F100%

Positioning/Linear/Circular(G00/G01/G02/G03)G61 / G09

G04, 0~9999.9999sec

G28G27G30M00, M01 / M02, M30EIA / ISO (Automatic recognition)1 ea+/- 9999.9999” (+/- 8digit)O4 / N8 digit

G90 / G91

G17, G18, G19G52~G59“On” fixedG1010 Step

G73, G74, G76, G80 ~ G89

G31

Sub / Spindle functionsMiscellaneous functionMiscellaneous function lockSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length compensationTool offset pairsTool life managementData input / output & Editing functionsReader/Puncher interfaceMemory card input/outputEmbeded EthernetPart program storage lengthRegistered programsMemory lockBack ground editingExtended part program editingExtenal messageSetting, Display, DiagnosisSelf-diagnosis functionAlarm history displayHelp functionRun hour/Parts count displayActual cutting feedrate displayGraphic displaySpindle/Servo setting screenOperation monitor screenSelection of 5 optional languageLCD Screen SaveAuto Data BackupManual Guide i

optionSub Axis ControlAdditional work coordinate systemAdditional custom micro changeWork coordinate CommandWork coordinate InterpolationCircular InterpolationSingle direction positioningFAST ethernetData serverAI Contour Control(AICC) IIAdditional optional blockskipHandle interuptManual Handle Feedprogram storage lengthDynamic graphic displayProtection of data at 8 levelsTool monitoring function

Figures in inch are converted from metric values.Design and specifications are subject to change without notice.

M3 digit

S5 digits, binary output50% ~ 120% (10% Unit)

Max. T8 digitsG40~G42G43, G44, G4999 Pair

RS232C

100 Mbps320 m (128 Kbyte)125 ea

Copy, move, change of NC program

Alarm & Message

Loadmeter Light

Screen saver

Interactive Programming

4, 5 Axes48 Pair / 300 Pair#100~#199, #500~#999

G60100 Mbps1GB 9 ea (Application can be limited)

3 Unit640m (256Kbyte) / 5120m (2Mbyte)

HWTM (Embeded FANUC Type)

CONTROLLER

24+

25

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

GLOBALNETWORk

26+

27

FB

Ser

ieS

Vert

ical

Mac

hini

ng C

ente

rH

YUN

DAI

WIA

MAC

HIN

E TO

OL

Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804

HeADqUARTeR

OVeRSeAS OFFICeSHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143

TEL : +1 201 489 2887 FAX : +1 201 489 2723

Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China

TEL : +86 512 5672 6808FAX : +86 512 5671 6960

Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041

TEL : +86 28 8665 5550FAX : +86 28 8666 2985

HYUNDAI WIAMachine Tools europe Kaiserleipromenade 5, D-63067 Offenbach, Germany

TEL : +49 69271 472 701FAX : +49 69271 472 719

Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233

TEL : +86 21 6427 9885FAX : +86 21 3431 0376

Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056

TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258

Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany

TEL : +49 6142 9256 0 FAX : +49 6142 834 100

Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176

TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853

qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061

TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338

Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719

Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400

TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597

Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013

TEL : +86 24 3228 6640FAX : +86 24 3228 6642

2015-12 002.003 ENG

Head office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do

Tel +82 55 280 9206, 9299 Fax +82 55 210 9804

machine.hyundai-wia.com

overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do

Tel +82 31 593 8173