Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
JenCamFCB-H HD-SDI Board H11
JenCam GmbH * Felsbachstraße 9 * D-07745 Jena Telefon +49(0)3641-22530 * Fax +49(0)3641-225319
E-Mail [email protected] * Internet http://www.jencam.de
for Sony Zoom Camera FCB-H11
INPUTS: DATA 4 LINK LVDS (from Sony FCB-H11) CLOCK LVDS (from Sony FCB-H11) CAMERA RESET LVTTL CONTROL RS232, RX, TX, VISCA VIDEO MODE HD-SDI, 1080 60i, 1080 50i
720 60p, 720 50i SDI 576i, 480i analog Y, Pb, Pr (direct from camera) CVBS (direct from camera)
POWER INPUT 6V TO 12V OPERATING CONDITIONS: Ambient Temperature (min/max): 0°C /+60°C Humidity: 20%-70% STORAGE CONDITIONS: Temperature (min/max): -20°C/+ 60°C Humidity: 20%-70% BOARD MECHANICAL: 48 x 45 x 20 mm
Order Code 30055225
FPGA
SDI SERIALIZER LVDS 8bit CLK SDI
analog CAN
8bit CLK
Micro Controller
SD Input
LVDS MICRO Coax 10p FCC 24p
LED Status 1 blink Firmware loading
2 Decoder initialization OK 3 FPGA loading OK 4 Camera Dialog OK 5 Video format config OK 6 FPGA video processing OK 7 Video format modification by switches.
1 2 3 4 FCB-H11OFF OFF OFF OFF External
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF 1080i59,94
OFF OFF ON OFF 1080i50
ON OFF ON OFF 720p59,94
OFF ON ON OFF 720p50
ON ON ON OFF
OFF OFF OFF ON
ON OFF OFF ON NTSC
OFF ON OFF ON PAL
HDSDI Conversion module for SONY FCB H11
Content Interface electronic Board ref TV10 0001
Firmware P-SDI-FCBH11
Mechanical interface Right angle black anodised aluminium plate +screws
Analog camera link 24pin FCC 150mm length Digital camera link USL20-10SS-005-C Cable assembly Power input wires
2 ways harness, 200mm length for power connector ( J6 )
Analog HD output wires
10 ways harness, 200mm length for HD video / com signal connector ( J7 )
JenCamFCB-H HD-SDI Board H11
JenCam GmbH * Felsbachstraße 9 * D-07745 Jena Telefon +49(0)3641-22530 * Fax +49(0)3641-225319
E-Mail [email protected] * Internet http://www.jencam.de
for Sony Zoom Camera FCB-H11
J7 PIN HD Video Signal out 1 Y 2 GND 3 Pb 4 GND 5 Pr 6 GND 7 RX RS232 8 TX RS232 9 GND
10 n.c.
J6 PIN Power 1 6 to 12 VDC 2 GND
J3 PIN SD Video 1 VBS Out 2 GND 3 n.c 4 n.c 5 n.c
TTL / RS232 level Open Bypass PS3 RS232 level TTL level PS4 RS232 level TTL level