ZAMC4100

Actuator and Motor Controller

from

A monthly selection of the latest products from EEWeb

PRODUCTSSeptember 2015S U P P L E M E N T

FEATURED

eeweb.com/register

Join Today

MYLINK

4

Automotive Full Bridge Gate Driver ICAllegro MicroSystems, LLC rolled out its new full-bridge controller for use with N-channel external power MOSFETs that has been specifically designed for automotive applications. Allegro’s A5929 has a unique charge pump regulator that provides full (>10 V) gate drive at battery voltages down to 7 V and allows the device to operate with reduced gate drive at battery voltages down to 5.5 V. A bootstrap capacitor is used to provide the above battery supply voltage required for N-channel MOSFETs...Read More

MRI Room and Shielded Enclosure FiltersThe LCR 059 series are MRI shielded room and enclosure power line filters having high attenuation of 100 dB from 5 MHz to 10 GHz. The filters have a rated voltage of 120/ 277 VAC line to ground. The rated current of these filters is up to 50 A at 60 ºC. These filters have an operating frequency of 50/60 Hz under an operating temperature of -40 ºC to 85 ºC...Read More

Digital Power MeterChroma’s Model 66200 series is a digital power meter featuring 16-bits ADC and embedded high speed DSP designed for single-phase measurements of AC power signals and related parameters common to most electronic products.

The internal 16 bits analog/digital converters with sampling rates of up to 240 kHz provide both high speed and high accuracy measurements, which is unprecedented within the industry for this class of power meters current on the market...Read More

New XBee Wireless Connectivity KitDigi-Key Electronics and Digi-International annnounces the availability of the New XBee® Wireless Connectivity Kit from Digi International. The kit has two XBee Grove Development Boards, two XBee RF Modules and micro-USB cables. The Wireless Connectivity Kit helps developers gain an understanding of how to incorporate wireless connectivity into their solution, as well as create prototypes for testing proofs-of-concept...Read More

5

FEATURED PRODUCTS SUPPLEMENT

Programmable Indicator LED BlinkerThe FAN5646 is a programmable LED indicator with TinyWire digital interface. TinyWire is a flexible, general-purpose, binary protocol designed to minimize the IC’s number of pins but still provides a complete digital interface that can be driven from any microcontroller. This device offers longer battery life for a hand-held systems...Read More

Intersil’s PowerNavigator™ GUI Version 5.2Intersil features the PowerNavigator™ GUI Version 5.2. It is a free, downloadable graphical user interface (GUI) designed to help systems designers quickly configure, validate and monitor their power supply architectures. The GUI features a high degree of power supply optimization. When used with the drag-and-drop GUI interface, the GUI enables a designer to change features and functions of a digital power supply design without writing a single line of code...Read More

Low Power, ZigBee-Compliant Radio TransceiverThe MG2420 is a ZigBee-compliant, low-powered 2.4 GHz IEEE 802.15.4 radio transceiver featuring high receiver’s sensitivity and does not need external T/R switch and filter. It offers programmable output power up to +9 dBm and provides enhanced multiple data rates with channel coding.

MG2420 can be controlled by an external microcontroller, and its operations can be configured through a high speed Serial Peripheral Interface (SPI)...Read More

High Voltage Operational AmplifierThe MSK 0004 is a high voltage operational amplifier (op amp) ideal for high performance signal conditioning applications, as well as resolver excitation designs. This device delivers maximum reliability by providing internal output overload protection and thermal overload protection. Monolithic design and internal compensation make the MSK 0004 an excellent replacement for many general purpose operational amplifiers and specifically the LH0004. hermetically sealed 10 pin metal can...Read More

6

Two Component, High Performance Epoxy SystemThe EP62-1LPSP is a two component, high performance epoxy system featuring convenient handling along with excellent temperature and chemical resistance. With a tensile lap shear strength exceeding 2,000 psi, it bonds well to a variety of substrates including metals, composites, glass and many plastics...Read More

Versatile TO-5 DPDT RelayThe TO-5 DPDT 412 series relays are ultraminiature relays designed for high-density PC board mounting. The relays’ unique construction features and manufacturing techniques provide excellent resistance to environmental extremes and overall high reliability. The devices have also proven to be an excellent RF switch for frequency ranges well into the UHF spectrum. The combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of T-R switching...Read More

User-Friendly MAX31856 Evaluation SystemThe MAX31856 is an evaluation system (EV system) designed to provide efficient hardware and software needed to evaluate the MAX31856 thermocouple-to-digital converter. The system is also capable of evaluating other thermocouple types depending on the users preference. The MAX31856PMB includes theMAX31856 with a screw terminal for the thermocouple...Read More

MLX90620 Thermal Array Evaluation BoardThe EVB90620 is an evaluation board for Melexis’ MLX90620 thermal array. It features USB interface to computer with no drivers needed and allows easy reconfiguration of the MLX90620 and thermal visualization.

The EVB90620 evaluation board and its software enables the user to make temperature measurements using a PC interfaces. ...Read More

FEATURED PRODUCTS SUPPLEMENT

7

eXtreme Low Power PIC MCUsMicrochip Technology Inc. has expanded its eXtreme Low Power (XLP) PIC® microcontroller (MCU) portfolio. Features of the new PIC24F “GB4” family include an integrated hardware crypto engine with both OTP and Key RAM options for secure key storage, up to 256 KB of Flash memory and a direct drive for segmented LCD displays, in 64-, 100- or 121-pin packages. Dual-partition Flash with Live Update capability allows the devices to hold two independent software applications...Read More

Bluetooth Smart Development KitThe Nordic Semiconductor’s nRF52-preview-DK (949-NRF52-DK) is a development kit designed for nRF52 series of devices. It supports Bluetooth Smart, ANT, 2.4 GHz and the Arduino UNO Rev 3 connector standard.

The development kit is a stand-alone board for developing Bluetooth Smart (formerly Bluetooth Low Energy), ANT or 2.4 GHz applications. The nRF52 is ideal for rapid prototyping and developing with the nRF52 device...Read More

Digital Fully Regulated ConverterThe DRQ-12 is a single output quarter brick bus converter that belongs to Murata’s DRQ 600 W series. The device provides a fully regulated, digitally controlled DC output in a quarter brick format that will support the evolving Advance Bus Converter (ABC) industry standard footprint for isolated board mounted power modules...Read More

8-Input MultiplexerThe 74HC151; 74HCT151 are low-power 8-bit multiplexers with non-inverting data path. It has an eight binary inputs (I0 to I7), three select inputs (S0 to S2) and an enable input (E). The devices are available in multiple package options and are specified in compliance with JEDEC standard no. 7A...Read More

8

Multi-Output Flyback Off-Line Power SupplyMulti-Output Flybacks can be the low cost topology of choice where multiple output voltages are needed from an efficient power supply. Advantages of the flyback converter include small BOM count, good efficiency, and ease of adding additional output voltages without using much space or cost. This paper gives an overview of the flyback, the process of adding multiple output voltages, issues that arise with regulation, methods to improve regulation...Read More

5 V DC High Reliability RelayOnlinecomponents.com, together with Panasonic Electronic Components, introduces the DS2E-S-DC5V. The device is a general purpose relay features high-performance polarized magnetic circuits that utilize the energy of permanent magnets have made it possible to create relays with strong resistance to shock and vibration...Read More

PFC ICs with Light-Load PerformancePower Integrations rolled out its HiperPFS™-3 family of power factor correction ICs, which offer high power factor and high efficiency across the entire load range. Targeting applications with continuous power demands up to 405 W for universal input and 900 W for high-line, the ICs feature efficiency levels of better than 95% from 10% load to full load and consume less than 60 mW under no-load conditions. A power factor of above 0.92 is easily achievable at 20% load...Read More

Understanding Datasheet ParametersEvery respectable manufacturer supplies a technical datasheet with their product that details at the very least the basic operating parameters, overall dimensions and pin connections, but to compare one DC/DC converter with another just relying on the datasheet information often requires interpretation rather than just a simple comparison of numbers...Read More

FEATURED PRODUCTS SUPPLEMENT

9

32-/16-bit CISC MicrocomputersThe R32C/100 is a series of high-end 32-/16-ibt CISC microcomputers featuring ultra-low power consumption and high-speed processing in actual applications. It offers extensive device scalability from low- to high-end typically used in automotive applications, as well as audio, communication and industrial equipment...Read More

Digital (I²C/SPI) Output AccelerometerKionix, a ROHM group of company, features the KX022-1020, a tri-axis, low power, robust accelerometer. The device is integrated with FIFO/FILO buffer that features a wide range of embedded functionality, which include tap detection, orientation, activity, and wake-up algorithms. Moreover, the KX022-1020 offers 16-bit resolution outputs for greater precision and user-selectable parameters and Output Data Rates (ODR) with programmable high-pass and low-pass filters...Read More

H.264 TranscoderSocionext introduces the MB86M01, MB86M02, and MB86M03 transcoders with built-in memory and H.264 translating function. These chips convert Full HD H.264 video data and MPEG-2 video data as well as transcoding between audio formats while featuring a low power consumption. They feature control functions for simultaneously viewing and recording programs....Read More

0.7 A PolySwitch Resettable DevicesThe RF3329-000 are polyswitch resettable devices for automotive circuit protection applications. They have holding current of 0.7 A at room temperature. These devices use standard kink lead spaced about 5.05 mm apart. They are also designed with radial-leaded construction...Read More

CLICKHERE

10

1.8 A Brushed DC Motor DriverThe DRV8837 is a 1.8 A low voltage brushed DC motor driver (PWM Ctrl). The device offers integrated motor driver solution for cameras, consumer products, toys,and other low-voltage or battery-powered motion control applications. It can drive one DC motor or other devices like solenoids. The output driver block consists of N-channel power MOSFET’s configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages...Read More

Configurable True-Digital PWM ControllerThe STR4A100 series are off-line PWM controllers with integrated sensing MOSFET intended for switching power supplies. The device features rent-mode type PWM control, random switching function, slope compensation function and leading edge blanking function...Read More

Your Circuit Starts Here.Sign up to design, share, and collaborate

on your next project—big or small.

Click Here to Sign Up

MYLINK

12

The ZAMC4100 actuator and motor controller is an integrated, single package solution. With rich diagnostic features and optimized thermal performance and LIN bus interface, the ZAMC4100 is well suited for automotive applications like high-end mirror controls, as seen in the evaluation kit supplied by ZMDI.

Actuator and Motor Controller

ZAMC4100

From

FEATURED PRODUCTS SUPPLEMENT

13

The ZAMC4100 actuator and motor controller is an integrated, single package solution. With rich diagnostic features and optimized thermal performance and LIN bus interface, the ZAMC4100 is well suited for automotive applications like high-end mirror controls, as seen in the evaluation kit supplied by ZMDI.

Actuator and Motor Controller

ZAMC4100

From

14

Tech Specs

Watch Video

Key FeaturesThe ZAMC4100 is an integrated single package solution that features an ARM Cortex-M0 microcontroller and several peripherals that make motor and actuator control easy. With four integrated half-bridge drivers and four high side load switches, the ZAMC4100 can control multiple motors or other loads at the same time, perfect for small, yet relatively complicated scenarios. Ideally suited for the automotive industry, this also has a LIN bus interface, a wide six to eighteen volt working range with over and undervoltage protection, and a specific output buffer for programmable electrochromatic mirror controls, using a 6-bit DAC. With built-in thermal protection, the ZAMC4100 will shut itself down before excess heat can cause lasting damage.

• Evaluation kit with a test mirror

• 9mm by 9mm 64-pin QFN package

• Exposed pad for thermal management

• Minimal external components in normal usage

• Easy to setup

• Half bridges are connected to motor drivers

• High side load switches for the heater

• Other high side switches for other higher power lights.

• Easy-to-use GUI interface

The ZAMC4100 can be used in a variety of settings, from automotive, to home, medical, industrial, and even security systems. Wherever you need intelligence and motor control in a very small package, the ZAMC4100 is an ideal candidate. For more information, please visit zmdi.com.

CLIC

FEATURED PRODUCTS SUPPLEMENT

15

Tech Specs

Watch Video

Key FeaturesThe ZAMC4100 is an integrated single package solution that features an ARM Cortex-M0 microcontroller and several peripherals that make motor and actuator control easy. With four integrated half-bridge drivers and four high side load switches, the ZAMC4100 can control multiple motors or other loads at the same time, perfect for small, yet relatively complicated scenarios. Ideally suited for the automotive industry, this also has a LIN bus interface, a wide six to eighteen volt working range with over and undervoltage protection, and a specific output buffer for programmable electrochromatic mirror controls, using a 6-bit DAC. With built-in thermal protection, the ZAMC4100 will shut itself down before excess heat can cause lasting damage.

• Evaluation kit with a test mirror

• 9mm by 9mm 64-pin QFN package

• Exposed pad for thermal management

• Minimal external components in normal usage

• Easy to setup

• Half bridges are connected to motor drivers

• High side load switches for the heater

• Other high side switches for other higher power lights.

• Easy-to-use GUI interface

The ZAMC4100 can be used in a variety of settings, from automotive, to home, medical, industrial, and even security systems. Wherever you need intelligence and motor control in a very small package, the ZAMC4100 is an ideal candidate. For more information, please visit zmdi.com.

Sierra Circuits:A Complete PCB Resource

PLUS: The Ground ” Myth in PrintedCircuits

“

PCB Resin Reactor+

Ken BahlCEO of Sierra Circuits

Let There Be

How Cree reinvented the light bulb

LIGHT

David ElienVP of Marketing & Business

Development, Cree, Inc.

New LED Filament Tower

Cutting Edge Flatscreen Technologies

+

+

M o v i n g T o w a r d s

a Clean Energy

FUTURE— Hugo van Nispen, COO of DNV KEMA

MCU Wars 32-bit MCU Comparison

Cutting Edge

SPICEModeling

Freescale and TI Embedded

Modules

ARMCortex

Programming

From Concept to

Reality Wolfgang Heinz-Fischer

Head of Marketing & PR, TQ-Group

Low-Power Design Techniques

TQ-Group’s Comprehensive Design Process

+

+

PowerDeveloper

Octobe r 20 13

Designing forDurability

View more EEWeb magazines— Click Here