129128 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

l Excel’s range of TCA series are heavy industrial precision built drills. l Main construction is of heavy grade castings. l Gears, Spindle & quill are made of high quality steel. l Heat treated & precision ground to close tolerances for accuracy & long life. l Splines are precision ground for smooth travel. l There is automatic lubrication to all essential moving parts. l Machines are designed for the ease & safety of the operator. l TCA 50 with mechanical clutch l TCE 70 Electromagnetic clutch

Features:

Heavy Duty DrillsTCA 50 TCE 70

l Geared Drive

l Auto. Drill Ejector

l Auto. Powerfeed to Quill

l Depth Stop

l Lo Volt Machine Light

l Fwd/Rev Switch

l Coolant System

l Spindle Protection Nut

l Emergency

Push-button Stop

l Electrically Interlocked

Chuck Guard

l Sensitive

Drilling Hand Wheel

l Rotating &Tilting Table.

l Table & Base are “T”Slotted

Included as Standard

Optional Tooling:

See pages 148 - 156

Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 50mm 75mmDrilling Cap Steel 50mm 70mmTapping Cap Cast Iron 40mm 55mm Tapping Cap Steel 36mm 50mm

Spindle Taper 4MT 5MTMax Drilling Depth 230mm 260mmT-Slot Size 18mm 18mmTable incline/rotate ± 90° ± 90°Table Load Max. 350 Kg 400 Kg Table Size 550 x 550mm 600 x 600mmBase Size 600 x 1060mm 600 x 1060mmSpindle to Column 400mm 420mmSpindle to Table Min. 50mm 25mm Max. 850mm 825mmSpindle to Base 1290mm 1270mmColumn Diameter 200mm 220mm Drilling Feed mm/rev 0.10, 0.20 0.1, 0.2, 0.3, 0.30, 0.40 0.4, 0.5, 0.6 Main Motor 4HP 7.5HP

Spindle Speeds RPM (9) 54 - 1032 (12) 51 - 966Coolant Pump 0.10 HP 0.20 HPDims WxDxH cm 60x120x260 70x120x270Net Weight Kg 710 840Packed Weight Kg 795 940

Specification TCA50 TCA70

Geared Head Premier Range

Auto Quill Feed1-340-500 1-340-705

130 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Heavy Duty DrillsDH 55G 0303-4265

l Heavy, solid cast design l Dirt/water-resistant, easy-to-clean membrane keyboard l 24 V DC electronics l Electrical spindle sleeve feed l Drilling depth stop l Automatic gearwheel lubrication via oil pump l Thread tapping device. l Machine lamp integrated in drilling head l Generously dimensioned, height adjustable protective screen with safety switch for greatest possible user protection l Generously dimensioned drilling table, solid, precision workmanship,with parallel T-slots and recirculating coolant duct, reinforcing ribs on rear, rotates through ± 90° about the column, laterally tiltingl Motorised drilling table height adjustment l Cooling unit and external coolant tank, can be removed for easier and complete emptying l Chip filter in line with Machinery Directive l Extremely stable, thick-walled cast-iron column for excellent force absorption l Solid base plate with parallel T-slots, precision surface finish l Optional footswitch available for toggling between clockwise and anticlockwise run and for thread tapping

Geared Head Thread

Tapping

Features:

Included as Standard Optional Tooling:See pages 148 - 156

l Drill Chuck

l Machine Light

l Drill Chuck Arbor

l Coolant

Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 60 mm Drilling Cap Steel 50 mm Tapping Cap Cast Iron M50 Tapping Cap Steel M42

Spindle Taper MT4 Max Drilling Depth 200 mm T-Slot Size / Space / No. 18mm / 150mm /2Table incline / rotate ± 90° / 360°Table Load Max 350 KgTable Size 600 x 600 mm Base Size 515 x 570 mm Spindle to Column 400 mm Spindle to Table 130 - 750 mm Spindle to Base Max 1300 mm Column Diameter 200 mm Drilling Feeds 3 Steps 0.1 / 0.15 / 0.2 mm/rev

Main Motor 2.2 / 2.8 Kw

Spindle Speeds RPM (16) 45 - 2000 Coolant Pump 100 W Dims LxWxH cm 85 x 105 x 250 Weight Kg 850

Specification DH55 G

Auto Quill Feed

NEW

131130 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Thread Tapping

Heavy Duty DrillB50 GSM 0303-4500

Geared Head

l Heavy-duty solid cast Iron constructionl Heavy-duty thick walled cast Iron upright provides for smooth running & stabilityl Automatic gearwheel lubrication via oil pumpl High concentricity precision due to stable main spindle hardened & groundl 9 Selectable speeds via gear shifting Lever at the front of the drill head & two stage driving motor provides for 18 speedsl Heavy duty solid drilling table, precision ground with intersecting T-slots, heavily ribbed at the underside,

height adjustable via rackl Integrated coolant system & coolant tankl Smooth running due to ground gearwheelsl Trapping facilityl Lockable main switch with protective motor switchl Machine lighting integrated in drill headl Spindle locking with integrated Drill drift for easy tool changel Vertical adjustable chuck guardl Adjustable drill depth stop with millimetre scalel Solid mounting base with “T” slots, precision ground.l Motorised rise & fall of table for B50 GSM.

Features:

Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 60 mm Drilling Cap Steel 50 mm Tapping Cap Cast Iron M42 Tapping Cap Steel M35

Spindle Taper MT4 Max Drilling Depth 230 mm T-Slot Size 18 mmTable incline/rotate ± 90°Table Load Max 300 KgTable Size 600 x 600 mm Base Size 860 x 600 mm Spindle to Column 375 mm Spindle to Table 800 mm Spindle to Base Max 1300 mm Column Diameter 200 mm Drilling Feeds 6 Steps 0.05 - 0.3 mm/rev

Main Motor 2.4 / 3.0 Kw

Spindle Speeds RPM (18) 54 - 2090 Coolant Pump 40 W Dims LxWxH cm 99 x 78 x 246

Specification B50 GSM

Included as Standard Optional Tooling:See pages 148 - 156

l Drill Chuck

l Machine Light

l Drill Chuck Arbor

l Coolant

Thread Tapping

Auto Quill Feed

132 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Heavy Duty DrillsDH 35G 0303-4250 DH 45G 0303-4255

l Heavy, solid cast designl Automatic gearwheel lubrication

via oil pumpl Excellent concentricity thanks

to hardened and polished main spindle

l Thread tapping device.l Main switch and motor

circuit breakerl Generously dimensioned,

height adjustable protective screen with safety switch for greatest

possible user protectionl Drilling depth stopl 24 V DC electronicsl Mechanical spindle sleeve feedl Dirt- and water-resistant,

easy-to-clean membrane keyboard l Optional footswitch

available for toggling between clockwise/ anticlockwise run and for thread tapping

Features:

Geared Head

Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 40mm 45 mmDrilling Cap Steel 35mm 40 mmTapping Cap Cast Iron M30 M40 Tapping Cap Steel M25 M35

Spindle Taper 4MT Max Drilling Depth 125mm 180 mmT-Slot Size 14mm 16 mmTable incline / rotate ± 90° / 360° Table Load Max. 200 Kg 250 Kg Table Size 400 x 420mm 530 x 530 mmBase Size 450 x 660mm 480 x 880 mm Spindle to Column 285 mm 350 mmSpindle to Table Min. 65 mm 130 mm Max. 800 mm 725 mmSpindle to Base 1217 mm 1210 mmColumn Diameter 115 mm 150 mm Drilling Feed mm/rev (3) 0.005, 0.15 (3) 0.1, 0.2Main Motor 1.5 / 2.2 kW 2.2 kW

Spindle Speeds RPM (8) 75 - 2000 (8) 90 - 1520 Coolant Pump 40W 40WDims LxWxH cm 73 x 45 x 218 88 x 60 x 245 Weight Kg 450 560

Specification DH 35G DH 45G

Included as Standard

Optional Tooling:

See pages 148 - 156

l Quick action Drill Chuck 1-16mm B16

l MT4 B16 Drill Chuck Arbor

Thread Tapping

NEW

DH35G

DH 45G

133132 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Thread Tapping Heavy Duty Drills

B 40GSM 0303-4400

Geared Head Thread

Tapping

l Facts that impress in terms of quality, performance and price

l Heavy, solid cast designl Automatic gearwheel lubrication via oil pumpl Excellent concentricity thanks to hardened

and polished main spindle l Thread tapping device.l Main switch and motor circuit breakerl Adjustable drilling depth stop with millimetre scalel Machine lamp integrated in drilling headl Precision, generously dimensioned drilling table, solid workmanship, with diagonal T-slots and recirculating

coolant duct, reinforcing ribs on rearl Integrated push-out tool for easy tool

changesl Coolant system and chip filter in line with Machinery Directive l Thick walled cast column for high force absorption and stability l Solid baseplate, large dimensions, extremely stable

Features:

Electrical Connection 400V. 3ph.50HZDrilling Cap Cast Iron 40 mm Drilling Cap Steel 35 mm Tapping Cap Cast Iron M30 Tapping Cap Steel M24

Spindle Taper MT4 Max Drilling Depth 180 mm T-Slot Size / Dist / No. 18 mm / 150 mm / 2Table rotatation 360° Table Load Max 250 KgTable Size 560 x 560 mm Base Size 510 x 510 mm Spindle to Column 350 mm Spindle to Table 780 mm Spindle to Base 1320 mm Column Diameter 150 mm Drilling Feeds 2 Steps 0.1 / 0.2 mm/rev

Main Motor 0.85 / 1.5 kW

Spindle Speeds RPM (18) 50 - 1450 Coolant Pump 40 W Dims LxWxH cm 94 x 53 x 228 Weight Kg 500

Specification B 40GSM

Included as Standard Optional Tooling:See pages 148 - 156

l Drill Chuck

l Machine Light

l Drill Chuck Arbor

l Coolant

Electrical Quill Feed

134 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Heavy Duty DrillsDH 28GSV 3ph 0303-4235 DH 32GSV 3ph 0303-4245

l Heavy, solid cast iron construction l High true running accuracy due to hardened and ground work spindlel Adjustable drill depth stop with millimetre scale l Low maintenance gearbox with grease lubrication

Features:

Electrical Connection 400 V. 3 ph.50 HZ Drilling Cap Cast Iron 28 mm 32 mmDrilling Cap Steel 26 mm 30 mmSpindle Taper 3 MT 4 MTMax Drilling Depth 127 mm 125 mmT-Slot Size 14 mm 14 mmTable Size 376 x 394 mm 400 x 420 mmBase Work Area 350 x 356 mm 420 x 644 mmSpindle to Column 260 mm 285 mmQuill Feed (2 Steps) 0.05, 0.1 mmSpindle to Table Max. 875 mm 820 mm Spindle to Base 1285 mm 1270 mmColumn Diameter 92 mm 115 mmMain Motor 1.5 kW 2.2 kW

Coolant Pump - 40 W

Spindle Speeds RPM 75 - 3,200 40 - 3,000 (4 Step Vario) Dims LxWxH cm 67 x 55 x 208 73 x 45 x 220 Weight Kg 175 312

Specification DH 28GSV DH 32GSV

Variable Speed

Optional Tooling:

See pages 148 - 156

Included as Standardl Machine Light l Drill Chuck

l Drill Chuck Arbor

Additional functions DH 32 GSV:l Tapping functionl Optional foot pedal for tappingl Automatic Spindle feed l Coolant System

DH 28GSV

DH 32GSV

135134 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT

Heavy Duty DrillsDH 26GT 0303-4220 DH 28GS 0303-4230 DH 32GS 0303-4240

l Heavy, solid cast iron construction l High true running accuracy due to hardened and ground work spindlel Adjustable drill depth stop with millimetre scale l Low maintenance gearbox with grease lubrication

Features:

Electrical Connection 400 V. 3 ph.50 HZDrilling Cap Cast Iron 26 mm 28 mm 32 mmDrilling Cap Steel 24 mm 26 mm 30 mmSpindle Taper 3MT 3 MT 4 MTMax Drilling Depth 127 mm 127 mm 125 mmT-Slot Size 14 mm 14 mm 14 mmTable Size 380 x 380 mm 376 x 394 mm 400 x 420 mmBase Work Area 350 x 322 mm 350 x 356 mm 420 x 644 mmSpindle to Column 235 mm 260 mm 285 mmQuill Feed - - (2 Steps) 0.05, 0.1 mmSpindle to Table Max. 450 mm 875 mm 820 mm Spindle to Base 610 mm 1285 mm 1270 mmColumn Diameter 92 mm 92 mm 115 mmMain Motor 1.1 / 1.5 kW 1.1 / 1.5 kW 1.5 / 2.2 kW

Coolant Pump - - 40W

Spindle Speeds RPM 75 - 2,900 75 - 2,900 75 - 2,000 Dims LxWxH cm 60 x 38 x 143 67 x 55 x 208 73 x 45 x 220 Weight Kg 158 175 312

Specification DH 26GT DH 28GS DH 32GS

Geared Head

Included as Standard

Optional Tooling:

See pages 148 - 156

l Machine Light l Drill Chuck

l Drill Chuck Arbor

Additional functions DH 32GS:l Tapping functionl Optional foot pedal for tappingl Electromagnetic clutch for the feedl Coolant System

Thread Tapping