G3--2

FEATURES/BENEFITS

¯ Cast iron housings coated with durable white Nylon11resist corrosion better than epoxy paints.

¯ Stainless steel nameplates and fasteners

¯ Rubber covered bore plugs

¯ Electroless nickel plated output shafts

¯ Footless multimount gearcase is standard.Nylon coated bolt-on base is available as an option

¯ Smooth contours on all surfaces for easy cleaning

¯ Integral Quill MountClose Coupled C-face Design

¯ 1/4 TO 5 HP

¯ 5:1 TO 60:1 Reductions

¯ 6 Case Sizes1.33 IN. to 3.50 IN. Center Distances

You don’t need a maintenanceschedule anymore. No periodicmaintenance is required becauseit’s virtually maintenance free.

Quill TIGEAR Speed ReducersWith the RELIALUBER system

Designed To Survive The Severe Washdown Environ-ments Found In Food Processing And Chemical Ap-plications.

NYLON COATEDE-Z KLEENR TIGEAR

G3--3

FEATURES/BENEFITS

DODGE TIGEAR Tough Industrial Gearing

RELIALUBE is an exclusive systemsapproach to lubricating, sealing and cooling

the components in an enclosed gearbox.

THERELIALUBERSYSTEM

1. Factory filled synthesized hydrocarbon lubricantstays contamination free and won’t break down undernormal operating conditions.

2. Our special compression chamber lowers the gearcasepressure and eliminates the potential leakage andcontamination paths associated with the use ofconventional vents.

3. Specially engineered, bi--rotational, hydrodynamicradial lip design effectively pumps lubrication back intothe oil sump while simultaneously sealing out externalcontaminants. The special lip design, used inconjunction with precision, plunge ground sealjournals, extends the seal service life by creating lessdrag, less heat and reduced shaft wear.

4. A silicone based sealant seals metal--to--metal jointsbetter than gaskets. It has a wide operatingtemperature range and is highly resistant tochemical and solvents.

Our exclusive RELIALUBE system minimizes leaks by giving youa pressure vented gearbox with no open paths to the environment.