FG Series Magnetic Float Level Transmitteraplusfine.com/wp-content/uploads/2015/01/FG-SERIES-CATALOG.pdfFloat Sensing Element Magnet Float Sensing Rod The FG Series is a magnetic float

※d> diameter of float for installation.

0 Each unit is protected by PP or PVDF process connection or coating on process connection. Please correct underlines in model code part number area so the underline is directly beneath the appropriate boxes or letters

Aplus Finetek Sensor, Inc.

ISO-9001:2000 certified

FG Series Magnetic Float Level Transmitter

More than just another level measurement company ….

FEATURESŸ

Ÿ Robust sensing elements (Fig. 1 and 2)Ÿ Lower installed cost than other technologiesŸ Marine certified versions Ÿ Explosionproof units available

Reliable technology for liquid level measurement

INDUSTRY USE AND APPLICATIONSThe FG series magnetic float level transmitter is ideal for measuring the continuously changing level of a wide range of liquids in many different industries.The FG series is especially suitable for applications where cost-effectiveness and reliability are key, including the following industries:Ÿ Power generationŸ Water/wastewater treatmentŸ Marine/shipping vesselsŸ ChemicalŸ PetrochemicalŸ HydraulicsŸ Many others

0.169 (4.3)

0.236(6)

0.472(12)

1 2 3 4

0.021(0.53)

0.1(2.54)

0.157(4)

1 2 3 4

Fig.2

Fig.1

Sensing Element Size

Reed Switch

Resistor

Sensing Element

Units: Inch (mm)



PRODUCT INTRODUCTION

1

L

D

PRINCIPLE

FG Series

PB Series

COM EXC IN

R

R

R

R

R

R

R

R

R

STRUCTURE (WITHOUT ENCLOSURE)

Connection cable

Reed switchmodule

Float

Sensing Element

Magnet

Float

Sensing Rod

The FG Series is a magnetic float level transmitter that continuously measures the level of a liquid in a tank or other type of vessel. The FG level transmitteruses the principles of magnetism and buoyancy to generate an electronic resistance output in response to the continuously changing liquid level. The level transmitter is comprised of a float and stem, also called the sensing rod, as shown in the below illustration. The float is selected and sized for its buoyancy in the specific liquid to be measured and contains a magnetic element. The sensing rod is sized for the specific maximum measuring length required and incorporates a series of magnetically activated sensors (reed switches) which respond to the magnetic field of the float to generate the electronic output. The FG series magnetic float level transmitter can also be equipped to produce a 0/4-20mA output signal. The magnetic float level transmitter is very reliable and cost-effective.



ENCLOSURES

2

3.46(88)

3.31(84)

1/2"PF

E

1/2"PF

C

Material : Polypropylene (fiberglass reinforced)Enclosure : IP65Max.Temp.: -4⁰F~176⁰F (-20⁰~80⁰C)

Material : Aluminum (powder coated) Enclosure : IP65Max.Temp.: 4⁰F~392⁰F (-20⁰~200⁰C)

G3.35x3.15(85x80)

2.17(55)

PG16

Material : PolycarbonateEnclosure : IP65Max.Temp.: -4⁰F~176⁰F (-20⁰~80⁰C)

5.04 (128)

4.21(107)

1/2"PF

f (f118)

4.65

B

Material : Aluminum (powder coated)Enclosure : IP65Max.Temp.: -4⁰F~392⁰F (-20⁰~200⁰C)

D

1/2" NPT

f4.45 (f113)

4.25(108)

Material : Aluminum (powder coated)Enclosure :: IP65 Max.Temp.: -4⁰F~392⁰F (-20⁰~200⁰C)

XN

3.15(80)

f2.76(f70)

1/2"NPT

Material : 316SSEnclosure : IP65Max.Temp.: -4⁰F~392⁰F (-20⁰C~200⁰C)

2.76(70)

1/2"PF

Material : Aluminum (powder coated) Enclosure : IP65Max.Temp.: -4⁰F~212⁰F (-20⁰~100⁰C)

Units: Inch (mm)

5.04 (128)

f (f118)

4.65

4.21(107)

f2.76(f70)

FLOATS

S3

S6

S4

S5

S8

S9

P3

F4

A

B

C

B

A

C

B

A

C

C

B

A

1.77x2.17x0.59 (45x55x15)

2.95x4.25x0.75 (75x108x19)

2.95x2.87x0.75(75x73x19)

2.05x2.05x0.59(52x52x15)

3.94x3.94x0.79(100x100x20)

5.90x5.90x1.18(150x150x30)

1.89x1.77x0.73(48x45x18.5)

1.89x2.44x0.71(48x62x18)

>0.65

>0.5

>0.61

>0.5

>0.55

>0.45

>0.6

>0.75

174 (12)

145 (10)

435 (30)

435 (30)

218 (15)

218 (15)

73 (5)

73 (5)

316SS

304SS

316SS

304SS

304SS

304SS

PP

PVDF

392⁰F (200⁰C)

392⁰F (200⁰C)

392⁰F (200⁰C)

392⁰F (200⁰C)

392⁰F (200⁰C)

392⁰F (200⁰C)

176⁰F (80⁰C)

248⁰F (120⁰C)

0.83 (37.6)

0.364 (165)

0.074 (33.4)

0.226 (102.4)

0.55 (249.7)

1.18 (534)

0.078 (35.5)

0.144 (65.3)

Dimensions (inch/mm)

Type AxBxC(mm) S.G.Max. Operating

Pressure (psi/bar)

MaterialMax. Operating Temp. (⁰F/⁰C)

Approx. Weight (lb./g)



3

EX

C

INCOM

ZERO SPAN

FG Series (2-Wire versions)

Power Supply : 12~36VDCOutput Current : Load Resistance : Dependent of Power Supply Voltage (Vs) LR (max.) = 50*(Vs-8) ohmsAmbient Temperature : 40⁰F~176⁰F (-40⁰C~80⁰C)Accuracy : ±0.1% @ 77⁰F (25⁰C)Temperature Effect : 0.01%FS per ⁰CAdjustments* : Zero (5%FS) Span (20%FS)

4-20mA, Loop Powered

-

EX

C

INCOM

ZERO SPAN

EXC+24V O/P A InputEXC+24V

FG Series (2-Wire versions)

EXC24V

Current Input

PB SeriesPanel Meter

+24V

O/P

All 2-wire versions of FG series magnetic float level transmitterare equipped with the TAB-2110 transducer to provide the desired 4-20mA 2-wire output.

* Transducer is calibrated at the factory for the FG series ordered measuring length. Zero/Span adjustments are not needed, but can be made if ever required.



SPECIFICATIONS – ECONOMICAL VERSION

4

L

D

FG -AR49

FG -AR79

FGB-CR5P3

FGB-CR6F4

3/8"PF

3/8"PF

3/4"PF

3/4"PF

f14mm 304SS, 316SS

f17.2mm 304SS

f mm17.2 Polypropylene

f mm16 PVDF

S3: 45x55mm 316SSS4: f52x52mm 316SS

f

MODEL : FG 9w99 9 99 9999

FGA...Max.19.7ft (6m)FGB...Max.19.7ft (6m)

FGB...Max.19.7ft (6m)

FGB...Max.19.7ft (6m)

FGA...Max.19.7ft (6m)FGB...Max.19.7ft (6m)

Float

Prewired electrical cable

Prewired cable: Silicon cable, 3 conductors x 39.3” (1m) longOutput: 3-wire resistanceOperating temp.: Polypropylene stem 14⁰F~176⁰F (-10⁰C~80⁰C) PVDF stem -4⁰F~248⁰F (-20⁰C~120⁰C) Stainless Steel stem -4⁰F~248⁰F (-20⁰C~120⁰C)

ExampleOrder No.

Process Connection

Stem Size (dia.) / Material

Float Type / Size / Material S.G. Max. Length

>0.55

>0.5

>0.6

>0.75

>0.61

>0.65

S5: 75x73mm 304SSS6: f75x108mm 304SS

f

P3: 48x45mm Polypropylenef

F4: 48x62mm PVDFf

Length

Float Type (page 2)

Stem Type & Material (page 7)

Process Connection (page 7)

Resolution (page 7)

A: 0.25” (6.35mm) 3-wire resistance

B: 0.5” (12.7mm) 3-wire resistance

ExampleOrder No.

Process Connection





SPECIFICATIONS – STANDARD VERSION

5

2"PT

22-1/2"x10kg/cm

23"x10kg/cm

4"PT

26"x10kg/cm

f14mm 304SS, 316SS

f14mm 304SS, 316SS

f17.2mm 304SS

f17.2mm 304SS

f21.7mm or f21.2mm 304SS

S3: 45x55mm 316SSS4: f52x52mm 316SS

f

S3: 45x55mm 316SSS4: f52x52mm 316SS

f

S5: 75x73mm 304SSS6: f75x108mm 304SS

f

S8: 100x100mm 304SSf

S9: 150x150mm 304SSf

FGC/D...Max.19.7ft (6m)

FGC/D...Max.19.7ft (6m)

FGD...Max.19.7ft (6m)

FG ...Max.D 19.7ft (6m)


MODEL : FG9 99 9 99 9999B

1/2"PFx2

L

D

1/2"PFx2

L

D

FG BFQ49

FG BGN49

FGDBHN7

FGDBIQ7

FGDBKN8FGDBKN9

>0.55

>0.5

>0.45

>0.5>0.61

>0.65

>0.55>0.65

Enclosure: Aluminum (powder coated) or 316SS, IP65Output: 4-20mA, 2-wireTotal resistance value: 1MΩ (max.)

Operating temp.: -4⁰F~248⁰F (-20⁰C~120⁰C)Ambient temp.: 32⁰F~158⁰F (0⁰C~70⁰C)

Length

Float Type (page 2)



Enclosure (page 2)

Resolution (page 7)

C: 0.25” (6.35mm) 2-wire 4-20mA

D: 0.5” (12.7mm) 2-wire 4-20mA

ExampleOrder No.

Process Connection





SPECIFICATIONS – ANTI-CORROSION VERSION

6

FGDCFQ5P3

FGDCFQ6F4

FGDCGN5P3

FGDCGN6F4

2"PT

2"PT

22-1/2"x10kg/cm

22-1/2"x10kg/cm

17.2mm Polypropylenef

f16mm PVDF

f17.2mm Polypropylene

f16mm PVDF


F4: ø48x62mm PVDF

P3: ø48x45mm Polypropylene

F4: ø48x62mm PVDF





MODEL : FG D 99 9 99 9999C

PP

D

L

1/2"PFx1

2"NPT

1/2"PFx1

SS

Flange22-1/2"x10kg/cm

PVDF

PVDF

L

D

PVDF

1/2"PFx1

SS pipe

PP

SS pipe

Wetted parts: Wetted parts: PPWetted parts:

PP

SS pipe

0 Type C housing shown; for dimensions of housing refer to page 2

Each unit is protected by PP or PVDF process connection or coating on process connection.

>0.55

>0.75

>0.75

>0.6

Enclosure: Fiberglass Reinforced Polypropylene, IP65Output: 4-20mA, 2-wireTotal resistance value: 1MΩ (max.)Operating temp.: Polypropylene stem 14⁰F~176⁰F (-10⁰C~80⁰C) PVDF stem -4⁰F~248⁰F (-20⁰C~120⁰C)Ambient temp.: 32⁰F~158⁰F (0⁰C~70⁰C)

Length

Float Type (page 2)



Enclosure (page 2)

Resolution (page 7)

C: 0.25” (6.35mm) 2-wire 4-20mA

D: 0.5” (12.7mm) 2-wire 4-20mA

※ To select a Tri-Clamp process connection choose ES (1-1/2” Tri-Clamp) or FS (2” Tri-Clamp)

A: 3/8" B: 1/2" C: 3/4" D: 1" E: 11/2"

F: 2"

G: 2-1/2"

2M: 5 Kg/cm2N :10 Kg/cm

O: 150 LbsP : 300 LbsW:PN10

X :PN16Y :PN25Z :PN40Q : PTR : PF(G)

Dimension Specification

H: 3" I : 4"J : 5" K: 6" 4 : 7" 5 : 8"

P3 F4

S3 S4 S5 S6 S8 S9

Material

Plastic

SUS

Type

- : None

Length (unit : mm)

500mm per Unit

Stem size & material0: 12.7mm, 304SS (only for 0.5”/12.7mm resolution)4: f14mm, 304SS5: f17.2mm, Polypropylene6: f16mm, PVDF7: f17.2mm, 304SS8: f21.7mm, 304SS9: f27.2mm, 304SS

f B: 14mm, 316SSC: f12.7mm, 316SS (only for 0.5”/12.7mm resolution)D: f17.2mm, 316SSE: f21.7mm, 316SSF: f27.2mm, 316SS

f

Other

L: Tag (stainless steel)P: Pipe Shield (stainless steel)

* Tolerance of the total length is ±0.197”/5mm* Characteristics, specifications and dimensions are subject to change without notice* Please contact Aplus Finetek Sensor for more information

T : BSPU : NPTV : GASS : Others



ORDER INFORMATION – ECONOMICAL, STANDARD AND ANTI-CORROSION VERSIONS

7

Order No. FG D D F Q 6 F 1 1 5 0 0 (L)

A: 0.25”/6.35mm (3-wire resistance)B: 0.5”/12.7mm (3-wire resistance)C: 0.25”/6.35mm (2-wire 4-20mA)D: 0.5”/12.7mm (2-wire 4-20mA)S: Other

Resolution

Enclosure

B: Aluminum (powder coated)C: PolypropyleneD: Aluminum (powder coated)E: Aluminum (powder coated)G: PolycarbonateN: 316SS

Process connection

Float type

0500: 500mm up

1000: 501~1000mm

1500: 1001~1500mm

....



ExampleOrder No.

Process Connection



1/2"NPTx2

f4.45(f113) D type

4.25(108)

2"NPT

L

D

PP

D type

1/2"NPTx2

D

PVDFPP

PVDFD

D

f2.76(f70) N type

1/2"NPTx13.15(80)

F2.76(f70)

1/2"NPTx1

N type

FG7 DFQ49

FG 97 DGN4

FG7DDHN7

FG7DDIQ4

FGFG7DDKN9FG7DDKN8FG7DDKN9

7DDKN8

FG7DDFQ5P3

FG7DDFQ6F4

FG7DDGN5P3

FG7DDGN6F4

2"PT

22-1/2"x10kg/cm

23"x10kg/cm

4"PT

26"x10kg/cm

2"PT

2"PT

22-1/2"x10kg/cm

22-1/2"x10kg/cm

f14mm 316SS

f14mm 316SS



f21.7mm 304SS f27.2mm 304SS



f16mm PVDF

f16mm PVDF

S3: f45x55mm 316SS

S3: f45x55mm 316SS

S5: 75x73mm 304SSf

S8: 100x100mm 304SSf

S9: 150x150mm 304SSf



F4: 48x62mm PVDFf

F4: f48x62mm PVDF

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

FG7...Max.19.7ft (6m)

MODEL NO.:FG7 9 9 99 9 99 9999

PP

Wetted parts:

SS pipe

PVDF

SS pipe

SS

Wetted parts:

PP

SS pipe

Wetted parts:

PVDF

SS pipe

Wetted parts:

SS

Units (inch/mm)

Enclosure: D type – Aluminum (powder coated), Ex d IIB T3~T6 N type – 316SS, Ex d IIC T3~T6 Output: 4-20mA, 2-wireTotal resistance value: 1MΩ (max.)

>0.65

>0.65

>0.61

>0.5

>0.45

>0.6

>0.75

>0.6

>0.75

SPECIFICATIONS – EXPLOSIONPROOF VERSION

f4.45(f113)

4.25(108)

3.15(80)

Operating temp.: Polypropylene stem 14⁰F~176⁰F (-10⁰C~80⁰C) 304SS, 316SS and PVDF stem -4⁰F~248⁰F (-20⁰C~120⁰C)Ambient temp.: 32⁰F~158⁰F (0⁰C~70⁰C)

Length (unit: mm)

Float Type (page 2)



Enclosure (page 2)

Resolution (page 9)

C: 0.25” (6.35mm) 2-wire 4-20mA

D: 0.5” (12.7mm) 2-wire 4-20mA

8

NEPSI PROOF No. GYJ06231 Ex d IIC T3~T6 PTB PROOF No. 05 ATEX 1028 II 2G EEx d IIB T3~T6

II 2D IP65 T3~T6



Order No . FG7 D D F Q 6 F 1 1 5 0 0 (L)

A: 0.25”/6.35mm (3-wire resistance)B: 0.5”/12.7mm (3-wire resistance)C: 0.25”/6.35mm (2-wire 4-20mA)D: 0.5”/12.7mm (2-wire 4-20mA)

0: f12.7mm, 304SS (only for 0.5”/12.7mm resolution)4: f14mm, 304SS5: f17.2mm, Polypropylene6: f16mm, PVDF7: f17.2mm, 304SS8: f21.7mm, 304SS9: f27.2mm, 304SS

Resolution

EnclosureD: Aluminum (powder coated): Ex d IIC T3~T6N: 316SS: Ex d IIC T3~T6

Process Connection

Stem Size & Material

Float Type

P3 F4

S3 S4 S5 S6 S8 S9

Material

Plastic

SUS

Type

Length ( )unit : mm

A : 3/8" (10A)B : 1/2" (15A)C : 3/4" (20A)D : 1" (25A)E : 11/2" (40A)F : 2" (50A)G : 21/2" (65A)

H: 3" (80A) I : 4" (100A)J : 5" (125A) K : 6" (150A)4 : 7" (175A)5 : 8" (200A)

Dimension Specification

2M: 5 Kg/cm2N:10 Kg/cm

O:150 LbsP : 300 LbsW:PN10X :PN16Y :PN25

Z :PN40Q: PTR: PF(G)T : BSPU: NPTV: GASS: Others

0500: 500mm up

1000: 501~1000mm

1500: 1001~1500mm 500mm per Unit

9

ORDER INFORMATION – EXPLOSIONPROOF VERSIONS

B: f14mm, 316SSC: f12.7mm, 316SS (only for 0.5”/12.7mm resolution)D: f17.2mm, 316SSE: f21.7mm, 316SSF: f27.2mm, 316SS

Other

L: Tag (stainless steel)P: Pipe Shield (stainless steel)

* Tolerance of the total length is ±0.197”/5mm* Characteristics, specifications and dimensions are subject to change without notice* Please contact Aplus Finetek Sensor for more information

....



INSTALLATION

10

Mount the FG magnetic float level transmitter awayfrom the inlet liquid flow. Avoid installation wherestrong waves and agitation exists as this can produce errors.

If installation of the FG magnetic float level transmittercannot avoid agitation, surface waves and other disturbances it is recommend to install a pipe shield.Consult with Aplus Finetek as the FG level transmittercan be provided with a pipe shield.

Use an L-shaped support structure when no roofstructure exists, such as mounting from a concrete wall as shown here.

It is recommended to select a process connectionsize such that the opening in the tank roof has adiameter (d) that is greater than the diameter of the float being used in the FG magnetic float level transmitter.



Aplus Finetek Sensor, Inc.

Represented by:

08-FG-B0-AP, 07/22/2015

Documents

FG Series Magnetic Float Level Transmitteraplusfine.com/wp-content/uploads/2015/01/FG-SERIES-CATALOG.pdfFloat Sensing Element Magnet Float Sensing Rod The FG Series is a magnetic float