-
Copyright © 2020 White Knight Fluid Handling | A Graco companyP:
435.783.6040 | [email protected] |
https://wkfluidhandling.com
engineer approved™
Version: 2.0.3 | Published: 20 Oct 2020 | P. 1Specifications
subject to change without notice
FHA Filter HOusinGs
441.7
441.7
45317.8
48118.9
2278.9
2459.6
903.5
973.8
10 in. 20 in.
FHA housings fit Code 0 filter cartridges and sizes offered by
major suppliers.
Filter sizing
High-Purity Compact Multi-Chamber Filter HousingsFHA Series
dual-chamber and quad-chamber filter housings fit standard filter
cartridges from major suppliers. They provide high flows in
PTFE/PFA fluid paths with reliable dual-static crush seals that can
be retightened. These compact filter housings eliminate additional
plumbing and welding, and offer various fitting options.
https://wkfluid.com/fha/
Advanced technologies
• Compatible with Code 0 filter cartridges • Nonmetal PTFE/PFA
liquid paths• Compact layouts with configurable
fitting locations, sizes and types• Filters in parallel or
series operation• Up to 3.2-in filter diameters for
greater filtration surface area• Eliminate welds and excess
plumbing to reduce costs, save time, save space, and remove leak
points
• Easy to configure, install and service
• Compact, durable design with minimal parts
• Leak-free dual-static crush seals • Low pressure drop (1-in
flow path)• Max pressure at 25°C is 7 Bar, 100 psi
Max pressure at 100°C is 3 Bar, 45 psi
Features & Benefits
Reliable double O-ring seals
Compact layouts reduce footprint
Adjustable seals
Greater filtration surface areawith up to 3.2-in diameter
filters
Low pressure drop
Easy to install
Eliminates additional plumbing and welding
Various fitting options
Two O-rings in an angled load system ensure reliable seals to
prevent leaks. Sealing pressure can be adjusted beyond initial
compression loads.
Dual-static Crush seal
UP TO 7 BAR / 100 PSIUP TO 7 BAR / 100 PSI
RECIRC. / DELIVERYRECIRC. / DELIVERY
ULTRA HIGHULTRA HIGH
PURITYPURITY
UP TO
100˚C212˚F
UP TO
100˚C212˚F
TEMPERATURETEMPERATURE
Compatible with Code 0 filters
-
Copyright © 2020 White Knight Fluid Handling | A Graco companyP:
435.783.6040 | [email protected] |
https://wkfluidhandling.com
Version: 2.0.3 | Published: 20 Oct 2020 | P. 2Specifications
subject to change without notice
FHA series Filter Housingsengineer approved™
28911.4
1455.7
321.3
58122.9
652.6
34513.6
321.3
1505.9
321.3
39315.5
37014.6
Dimensions in [mm] inchesFHA-02-P Dimensions
Dual-Chamber Parallel (FHA-02-P)
liquid Outlet
liquid inlet Pre-Filter Vent/Drain
Post Filter Vent/Drain
Compare to traditional filter housings
2-Chamber Parallel Filter Housing
FHA-02 traditional 2-Chamber Parallel Filter Housing
Wrench tighten
Fluid goes through all chambers simultaneously greatly reducing
pressure drop.
Traditional Parallel Housing Dimensions for Comparison
https://wkfluid.com/fha/
-
Copyright © 2020 White Knight Fluid Handling | A Graco companyP:
435.783.6040 | [email protected] |
https://wkfluidhandling.com
Version: 2.0.3 | Published: 20 Oct 2020 | P. 3Specifications
subject to change without notice
FHA series Filter Housingsengineer approved™
Traditional Parallel Housing Dimensions for Comparison
Dimensions in [mm] inchesFHA-04-P Dimensions
Quad-Chamber Parallel (FHA-04-P)
4-Chamber Parallel Filter Housings
Fluid goes through all chambers simultaneously greatly reducing
pressure drop.
Wrench tighten
FHA-04Four traditional Housings in Parallel
liquid Outlet
Pre-Filter Vent/Drain
liquid inlet
Post Filter Vent/Drain
69227.2
39315.5
28911.4
28911.4
58122.9
37714.8
321.3
652.6
1505.9
2369.3
Compare to traditional filter housings
https://wkfluid.com/fha/
-
Copyright © 2020 White Knight Fluid Handling | A Graco companyP:
435.783.6040 | [email protected] |
https://wkfluidhandling.com
Version: 2.0.3 | Published: 20 Oct 2020 | P. 4Specifications
subject to change without notice
FHA series Filter Housingsengineer approved™
Traditional In-Line Housing Dimensions for Comparison
Dimensions in [mm] inchesFHA-02-s Dimensions
Dual-Chamber series/in-line (FHA-02-s) Compare to traditional
filter housings
2-Chamber Series Filter Housing
two traditional Housings in series
Wrench tighten
Fluid goes through first chamber and then through an additional
chamber, which increases filtration and reduces pressure drop.
FHA-02
28911.4
1455.7
321.3
34513.6
58122.9
642.5
1505.9
321.3
37714.9
1576.2
liquid Outlet
liquid inlet Pre-Filter Vent/Drain Post Filter Vent/Drain
intermediate Filter Vent/Drain
https://wkfluid.com/fha/
-
Copyright © 2020 White Knight Fluid Handling | A Graco companyP:
435.783.6040 | [email protected] |
https://wkfluidhandling.com
Version: 2.0.3 | Published: 20 Oct 2020 | P. 5Specifications
subject to change without notice
FHA series Filter Housingsengineer approved™
Traditional In-Line Housing Dimensions for ComparisonDimensions
in [mm] inches
FHA-04-s Dimensions
Quad-Chamber series/in-line (FHA-02-s)Compare to traditional
filter housings
4-Chamber Series Filter Housing
FHA-04
Four traditional Housings in series
Wrench tighten
Fluid flows through first two chambers and then through the next
two chambers, which increases filtration and reduces pressure
drop.
28911.4
28911.4
321.3
642.5
58122.9
34513.6
1505.9
321.3
59023.2
36514.4
liquid Outlet
liquid inlet Pre-Filter Vent/Drain Post Filter Vent/Drain
intermediate Filter Vent/Drain
https://wkfluid.com/fha/
