Designed for Food Plant SanitationLike all Weiland Doors, we consider or customers in the food processing industries with each design decision made. We create our doors to be corrosion resistant, durable, and attractive while working to mitigate voids and pooling surfaces. Our fiberglass sliding door is no exception to these principles of design.

Our panels are free of voids. The fiberglass surface of the door is nominally 1/8’’ thick, while the edge of the door is nominally 1/2’’ thick. We have brushed stainless options for all door trim and casements. We mold the highest quality gel-coat into the fiberglass substrate. What makes our fiberglass panels a stand-out product is the seamless nature of our fiberglass.

Thermal AdvantageUsing only a combination of polyurethane, structural foam, and polymer backing inside the core, we have achieved a door that boasts excellent thermal properties that outperforms many alternatives on the market without the use of volatile pultruded fiberglass, or the poor thermal properties of steel or aluminum found in other brands. R33 is typical for a 4’’ thick slider panel. Our panels seal tight against a neoprene bulb gasket that can be heated in freezer applications to keep them dry, warm, and pliable.

Premium Hardware We lead with corrosion resistant options for our frame, trim and parts, including stainless steel where possible. When power options are required, our operator is NEMA4X, with a marine grade aluminum body and stainless steel shaft and sprockets.

A value engineered standard trim and hardware option is available upon request.

FIBERGLASS REINFORCED SLIDING DOORSVERTICAL & HORIZONTAL

Our heritage is in making doors for the most extensive USDA inspected meat processing

facilities in North America. So it should come as no surprise that we are skilled at creating custom door solutions that integrate

with rail infrastructure in all industrial food processing applications.

(Pictured Above) Fiberglass reinforced horizontal sliding door panel with a 16 Ga.

stainless steel edge guard.

Meet the best in Meat Rail Doors

weilanddoors.com | 402.454.2106 THERE IS NO EQUAL

DETAILS & OPTIONSHorizontal and Vertical Door Panel SizeFiberglass reinforced horizontal sliding doors are presently limited to openings that are 8’x10’ or smaller and are 4’’ thick.

Standard Frame OptionsThe typical sliding door frame consists of a face-casing, through-jamb, and back-trim made from 26 Ga. stainless steel with an HDPE plastic core. The jamb is made to suit various wall depths. Additional metal types and finishes are available upon request.

FIBERGLASS REINFORCED SLIDING DOORSHORIZONTAL AND VERTICAL

Power and Actuation Options• NEMA4X rated operator for all applications• Smart 10.0 logic board with built-in radio receiver optional timer to close, delay on reverse, mid-stop, and run-out timer)Actuation options include: –Photoeye Actuator - Radio Remote Actuator - Loop Detection Actuator - Closing Signal Warning Control - Electronic Interlock - Time Delay Close

weilanddoors.com | 402.454.2106 THERE IS NO EQUAL

FiberShell™ Fiberglass is continuous around all sides of our standard sized panels, and all Gel-coat is molded into the substrate.

High Screw Retention Composite Reinforcement

CleanCor™ Weiland door panels with CleanCor™ technology are completely void free for sanitation, and create an excellentthermal and acoustical barrier.

The Industries Thickest Fiberglass Edge

HORIZONTAL DOOR OPTIONS

Standard Horizontal Door Attributes• Stainless Steel Pull Handle • Two Heavy Duty Stainless Steel Trolleys • Stainless Steel Track / Track Brackets • Two Stainless Steel Stay Rollers (Adjustable)•Heavy Duty Gasketing• For Power Operated Doors: – Inside Safety Release – Redundant safety photocell beam installed in jamb

Other Horizontal Door Options:• Heater Cable for Freezer Applications• Custom Colors (Consult Factory)• Vision Panels • Glazing options to Suit the Application• Kickplates• Padlocking Provision• Wicket Panels• Track & Rail Openings

VERTICAL DOOR OPTIONS

Standard Vertical Door Attributes • Stainless Steel Pull Handle • Four Heavy Duty Stainless Steel Rollers• Stainless Steel Track / Track Brackets • Heavy Duty Gasketing• For Power Operated Doors: – Inside Safety Release – Redundant safety photocell beam installed in jamb

Other Vertical Door Options• Heater Cable for Freezer Applications• Custom Colors (Consult Factory)• Vision Panels • Glazing options to Suit the Application• Kickplates• Padlocking Provision• Wicket Panels• Manual Chain Hoist Operator