Fibre Optic Cabling Solutions

Fibre Optic Cabling Solutions

Edition 01/03/2001Copyright Nexans 2001Subject to change without prior notice.

In this publication, no mention is made of rights with respect to trademarks or tradenames which may attach to certainwords or signs. The absence of such mention, however, in no way implies that there is no protection.

Published by Nexans Cabling Solutions - Alsembergsesteenweg 2, b3 - 1501 Buizingen - Belgium.Printed in Belgium.

1.Introduction

2.Technological information (Did you know about?)

3.Technology Roadmap : choosing the right fibre

4.Product Overview : 4.1 Cables4.2 Patch panels & Zone Distribution Boxes4.3 Patchcords4.4 Outlets4.5 Active Components

5.Structural Hardware5.1 Cabinets5.2 Cable Management5.3 Accessories

3

Fibre Optic Cabling Solutions

Introduction

GGIIGGAAlliittee IIII FFiibbrree SSoolluuttiioonnss :: GGIIGGAAbbiitt rreeaaddyy !!!!!!

Gigabit Ethernet is a reality : the IEEE 802.3z (Fibre part), voted in June 98 enables to run Gigabit rates over fibre.Since the emergence of this new application, its implementation on the market place is growing fast (see figures).

In the Gigabit world where evolving technologies can quickly make an entire network obsolete, choosing the right fibreinfrastructure is critical. Conventional wisdom has maintained for years that existing standard multimode fibres would provide virtually unlimi-ted bandwidth in LAN backbones to handle higher data speeds.However, recent tests have shown that traditional multimode backbones simply cannot deliver the requisite bandwidthbeyond 275 meters.The emergence of a new generation of transmitters, the Vertical Cavity Surface Emitting Laser (VCSEL), operating at850 nm imposes to choose a multimode fibre generation optimised for Laser injection, in order to deliver the requisitebandwidth on extended distances : GIGAlite II Fibre Solutions are a solution of choice, available in both 50/125 and62.5/125.Cabling Solutions Europe Fibre offer incorporates comprehensive solutions for Campus, Risers, Collapse backbone orFibre to the Workplace environment.

4

1

1998 1999 2000 20010

2

4

6

8

10Million

Gigabit Ethernet

ATM

Connection port shipments (source Del’Orro Group 06/2000)

Did you know about ?


The association of a new generation of sources (VCSEL) and multimode fibre has considerably modified the notion ofbandwidth.

Till now, bandwidth measurement method was based on Over Fill Launch (OFL) conditions, typical of LEDs.

The VCSELs and LASERs underfill the fibre : less modes travelling into the fibre, should lead to a bandwidth increase,unless the index profile of the fibre is optimised in its very centre.

GIGAliteTM II Fibre Cables provide you with the peace of mind that the fibre has been controlledversus Restricted Mode Launch conditions.

Mode Conditioning patchcords

During Gigabit Ethernet developments, a signal distortion at 1300 nm (1000 base LX) was demonstrated with someworse case multimode fibres, presenting a physical defect at the very centre. Tests conducted showed that it was possible to avoid the signal distortion by using special patch-cords, called modeconditioning patch-cords, offsetting the launch of LASER into multimode fibre.

The fibre quality incorporated in GIGAliteTM II cables avoids to use those expensive special patchcords.

5

Bandwidth :

2

Influence of Launch conditions on Bandwidth

High number of modes = high dispersion

Middle number of modes = lower dispersion

Few number of modes = very low dispersion

T

LEDoverfills the fibre

VCSELunderfills the fibre

LASERis extremelyrestrictive

Choosing the right fibre


Multimode fibre technology helps to keep the overall cost of the network down, including active ports, but have distance limitations.Single Mode fibre technology provides a long term future-proofing but with higher initial investment compared toMultimode.Then the choice of a fibre type is a balance between the expected evolutivity of the network, theinvestment to be made, and the lengths of the channels.

Upgrade or extension of an existing network :If the distance of the channel is less or equal to 600 m, we recommend to use GIGAlite II 62.5 solutions, which arefully compatible with existing fibre base and enable a partial migration towards Gigabit era.If the distance of the channel is less or equal to 1000 m, we recommend to use GIGAlite II 50 solutions. If the distance of the channel is greater than 1000 m, then GIGAlite II Single mode solutions are mandatory.

Design of a new network :GIGAlite II 50 solutions may be considered when creating a new network, since they offer greater capability, providedthat the length of the channel is less than 1000 m.If the length is greater than 1000 m, then GIGAlite II Single Mode solutions are mandatory.

6

3

275 600 1000 Distance(m)

Capacity (Mbps)

Lifetime

Standard MMF

GIGAliteTMII SM

GIGAliteTMII 50

GIGAliteTMII 62.5

+10000

1000

Direct Burial

Ducts

Zone Wiring

Outlet

GIGAlite II MC-0625

• Suitable for use in ducts or direct burial.• For areas where rodent protection is required.• Up to 72 fibre capacity.

Applications support : FDDI 100 MbpsEthernet 10 base FX

100 base FX1000 base SX/LX

Fibre Channel 266 Mbps1000 Mbps

ATM 155 Mbps622 Mbps

Available with SM Fibre

Cables

7

Cables for Campus

4.1

Cables for Risers

Cables for Horizontal area

Metallic armourDielectric armour

GIGAlite II MC-0625 up to 72 fibresGIGAlite II UD-1030 up to 24 fibresGIGAlite II MD-0625 up to 72 fibresGIGAlite II MG-0625 LSZH up to 72 fibresGIGAlite II TBW LSZH up to 24 fibresGIGAlite II UG30 LSZH up to 72 fibres

Tight BufferLoose Tube

GIGAlite II TBW LSZH up to 24 fibresGIGAlite II UG30 LSZH up to 24 fibresGIGAlite II MG-0625 LSZH up to 72 fibres

Tight bufferLoose tubeZipcord

GIGAlite II TBW LSZH up to 24 fibresGIGAlite II UG30 LSZH up to 24 fibresGIGAlite II ZC LSZH (2 OF)

Fibrecount

1224364872

GIGAliteTMII

62.5/125161.340161.346161.352161.358 161.370

GIGAliteTMII

50/125163.340163.346163.352163.358163.370

Ordering Codes

p 7p 8p 8p 9p 9p10

p 9p10p 9

p 9p10p10

CC RR HH

CC RR HH

CC RR HH

CC RR HH

CCaabblleess

GIGAlite II UD-1030

• Suitable for use in ducts or direct burial.• Provides rodent protection.• All dielectric design• Up to 24 fibre capacity.• Compact design






GIGAlite II MD-0625

• Suitable for use in ducts, direct burial or aerial installations.• For areas where rodent protection is required.• All dielectric design.• Up to 72 fibre capacity.






CCaabblleess

8

Fibrecount

4681224

GIGAliteTMII

62.5/125161.381161.382161.383161.385 161.391

GIGAliteTMII

50163.381163.382163.383163.385163.391

Ordering Codes

Fibrecount

1224364872

GIGAliteTMII

62.5/125161.565161.571161.577161.583 161.595

GIGAliteTMII

50/125163.565163.571163.577163.583163.595

Ordering Codes

CC RR HH

CC RR HH

GIGAlite II MG-0625 LSZH

• Suitable for use in ducts or in risers, with loops.• All dielectric design.• Flame retardant halogen free cable.• Up to 72 fibre capacity.






GIGAlite II TBW LSZH

• Suitable for use in ducts or in risers.• Designed for direct ST, SC termination.• All dielectric design.• Flame retardant halogen free cable.• Up to 24 fibre capacity.• Compact design.




ATM 155 Mbps622 Mbp


CCaabblleess

9

Fibrecount

1224364872

GIGAliteTMII

62.5/125161.495161.501161.507161.513 161.525

GIGAliteTMII

50/125163.495163.501163.507163.513163.525

Ordering Codes

Fibrecount

4681224

GIGAliteTMII

62.5/125161.421161.422161.423161.425 161.431

GIGAliteTMII

50163.421163.422163.423163.425163.431

Ordering Codes

CC RR HH

CC RR HH

GIGAlite II UG30 LSZH

• Suitable for use in ducts or in risers, with loops.• Designed for use with Zone Distribution box in collapsed backbone configurations.• Provides rodent resistance.• All dielectric design.• Flame retardant halogen free cable.• Up to 24 fibre capacity.• Compact design.





GIGAlite II ZC LSZH

• Suitable for use in horizontal links, or in patch assembly.• Designed for ST or SC termination.• All dielectric design.• Flame retardant halogen free cable.• Compact design.





CCaabblleess

10

Fibrecount

1224

GIGAliteTMII

62.5/125161.405161.411

GIGAliteTMII

50/125163.405163.411

Ordering Codes

Fibrecount

2

GIGAliteTMII

62.5/125161.001

GIGAliteTMII

50/125163.001

Ordering Codes

CC RR HH

CC RR HH

Patch Panels & Zone Distribution Boxes

11

Terminate Version (Tight Buffer)

4.2

Splice Version (Loose Tube)

Central Cabinet Wiring

Zone Distribution Wiring

Patch Panels

Zone Distribution Boxes

Central Cabinet Wiring

Zone Distribution Wiring

Patch Panels


p12

p13

p14

p15

Patch Panel 24 dual SC

Zone Distribution Box 12 ST Connectors

Patch Panel 48 ST Connectors

Zone Distribution Box 6 Dual SC Connectors

Patch Panels

Ready to terReady to terminate harminate hardwardwaree

Accepting the range of ST & SC couplers, these patch panels with pivoting mechanism facilitate front side installation.Fully manufactory pre-equipped, they ensure reliable and fast installation on site.They are the natural complement of GIGAliteTM II tight buffer cables.

PPaattcchh PPaanneellss

12

PP with 12 ST couplersPP with 24 ST couplersPP with 48 ST couplersPP with 72 ST couplersPP with 6 dual SC couplersPP with 12 dual SC couplersPP with 24 dual SC couplersPP with 36 dual SC couplers

1 HU1 HU2 HU2 HU 1 HU1 HU2 HU3 HU

850.005850.000851.000852.000850.105850.100851.100852.100

Ordering Codes

ST Hotmelt Multimode connectorST Multimode epoxy connector

205.121102.461

Accessories

Patch Panel 24 dual SC


Ready to terReady to terminate harminate hardwardwaree

Accepting the range of ST & SC couplers, these Zone distribution boxes are intended to be used for zone wiring, aswell af for re-configurable work areas. Fully manufactory pre-equipped, they ensure reliable and fast installation on site.They are the natural complement of GIGAliteTM II tight buffer cables and provide a capacity of 12 fibres per box.

ZZoonnee DDiissttrriibbuuttiioonn BBooxxeess

13

ZD box with 12 ST metallic couplersZD box with 12 ST ceramic couplersZD box with 6 dual SC metallic couplersZD box with 6 dual SC ceramic couplers

850.200850.202850.300852.302

Ordering Codes

Stacking accessory 890.011

Accessory

Zone Distribution Box12 ST connectors

Patch Panels

Ready to splice harReady to splice hardwardwaree

Accepting the range of ST & SC couplers, these patch panels with pivoting mechanism facilitate front side installation.Fully manufactory pre-equipped, with pigtails, they ensure reliable and fast installation on site.They are the natural complement of GIGAliteTM II loose tube cables.

PPaattcchh PPaanneell

14

PP with 12 ST couplers 62.5PP with 24 ST couplers 62.5PP with 48 ST couplers 62.5PP with 72 ST couplers 62.5PP with 6 dual SC couplers 62.5PP with 12 dual SC couplers 62.5PP with 24 dual SC couplers 62.5PP with 36 dual SC couplers 62.5

1 HU1 HU2 HU2 HU 1 HU1 HU2 HU3 HU

850.015850.010851.010852.010850.115850.110851.110852.110

Ordering Codes

Aluminium splice protection 890.003

Accessory

Patch Panel 48 ST connectors


rready to splice haready to splice hardwardwaree

Accepting the range of ST & SC couplers, these Zone distribution boxes are intended to be used for zone wiring, aswell af for re-configurable work areas. Fully manufactory pre-equipped, with pigtails, they ensure reliable and fast installation on site.They are the natural complement of GIGAliteTM II loose tube cables and provide a capacity of 12 fibres per box.

Aluminium splice protectionStacking accessory

890.003890.011

ZZoonnee DDiissttrriibbuuttiioonn BBooxxeess

15

ZD box with 12 ST metallic couplers 62.5ZD box with 6 dual SC metallic couplers 62.5

850.210850.310

Ordering Codes

Accessories

Zone Distribution Box6 dual SC connectors

Nexans’ GIGAlite II fibre patchcords incorporate multimode fibre classes optimized for laser based applications.They are the ideal complement of the GIGAlite II cable range.Nexans’ GIGAlite II fibre patchcords avoid the need of expensive Mode Conditionning Patchcords for 1000 BASE LX

Patch Cords

PPaattcchh CCoorrddss

16

4.3

Fibre 62.5 / 125Connectivity2ST / 2ST2SC / 2SC2SC / 2ST

2m960.147960.247960.253

5m960.148960.248960.254

Ordering Codes

Fibre 50 / 125Connectivity2ST / 2ST2SC / 2SC2SC / 2ST

2m962.147962.247962.253

5m962.148962.248962.254

Single Mode FibreConnectivity2ST / 2ST2SC / 2SC2SC / 2ST

2m964.147964.247964.253

5m964.148964.248964.254

ST SC

Modular outlet 45 for 2 Snap-in connectors, empty

The modular outlet 45 can accomodate ST and SC opticalfibre connector modules.

There are two different faceplates to support all environments:

• The straight version• The angled version protects the patchcord.

It offers the ideal solution for cable trays and floor boxes, where depth is restricted.

Outlets

OOuuttlleettss

17

4.4

Modular outlet 45StraightAngled

White422.650422.640

Ivory422.651422.641

Ordering Codes

Labelling system available as accessory

AccessoriesIcon holder for outlet (100 per bag) - whiteIcon holder for outlet (100 per bag) - ivory

421.005421.007

6 icon sets red6 icon sets green6 icon sets blue6 icon sets yellow6 icon sets orange6 icon sets violet6 icon sets grey6 icon sets brown

421.010421.011421.012421.013421.014421.015421.016421.017

Angled modular outlet Straight modular outlet

Modular Outlets

Optical Fibre Connector Modules

Modular outlet 45 for 2 Snap-in connectors, empty

Optical Fibre Connector Modules

p17

p18

Coverplates

Coverplate for 45 outlet with integrated mounting ring p19

Optical fibre connector modules

Optical fibre connector modules fit into a complete range of international outlets.Connector module dimensions (20x45mm) can easily be mounted in 45 series outlets.The modules come prefitted with the chosen connector coupler

Versions available:• 2 x ST• 2 x SC• blank insert

SinglemodeWhiteIvory

2 x ST420.021421.023

2 x SC420.031420.033

OOuuttlleettss

18

Ordering Codes

MultimodeWhiteIvory

2 x ST420.022421.024

2 x SC420.032420.034

SC connector module ST connector module

Blank insertWhiteIvory

420.001420.002

Coverplate for 45 outlet with integrated mounting ring

The coverplate is designed to be used with all 45 x 45 outlets either Copper or Fibre. It consists of a plastic flushmounting ring and a central plate.

Versions available:• European (outside dimensions: 80 x 80mm)• UK version (outside dimensions: 86 x 86mm, including holes for fixing)

OOuuttlleettss

19

Coverplate for 45 outletwith integrated mounting ring

Coverplate 86 x 86 for 45 outletwith integrated mounting ring

Coverplate for 45 outlet with integrated ringCoverplate UK single gang, 50 x 50Coverplate UK double gang, 50 x 50Coverplate for 45 outlet + metal flush mounting ringCoverplate for 45 outlet + metal flush mounting ring

Ivory200.051

--

200.003200.005

UK White-

424.013424.023

--

Ordering Codes

White200.050

--

200.002200.004

versionsquaredsquaredsquaredroundedsquared

80x8086x8686x8680x8080x80

Copper to fibre migration products

CCooppppeerr ttoo ffiibbrree mmiiggrraattiioonn pprroodduuccttss

20

4.5

ETHERNETETHERNET

FFAST ETHERNETAST ETHERNET

19”

FOR CABLE DUCT

FIBREFIBRE CONCON MSMS

FIBREFIBRE CONCON BACKUPBACKUP POWERPOWER SUPPLSUPPLYY

PC INTERFACES

19”

FOR CABLE DUCT

PC INTERFACES

Fibre Con M/Fiber Con 2Fibre Con 12Fibre Con 24

Fibre Share TP3+Copper Share TP3+

Fibre Con 1 PC

Fibre Con M/Fibre Con 200Fibre Con 1200Fibre Con 2400

Fibre Share 100 SFibre Con 100

Fibre Con 100 PC

ETHERNETETHERNET • Fibre Con M - module Fibre Con 2

Nexans Fibre Con M enables to work on a fibre infrastructure with hubs, routers or switching systems incorporatingTwisted Pair interfaces.Its modular concept provides ability to work with mixed configurations incorporating either 10 Mbps or 100 Mbps.• Converts twisted pair interfaces in optical interfaces• Compliant with IEEE 802.3 10 base T and 10 base FL.

Ordering Codes

p 20p 21p 21

p 22p 22

p 22

p 23p 23p 24

p 24p 25

p 25

p 26

p 26

Fibre Con MFibre Con 2 MM

610.070610.071

AccessoriesTelco to RJ45

2m3m5m

610.037610.038610.039

ETHERNETETHERNET • Media Converters - 12 ports Ethernet - Fibre Con 12

Fibre Con 12 enables to work on a fibre infrastructure with hubs, routers or switching systems incorporating Twisted Pair interfaces• Converts twisted pair interfaces in

optical interfaces• Compliant with IEEE 802.3 10 base T

and IEEE 802.3 base FL• Available with ST or SC connectivity

ETHERNETETHERNET • Media Converters - 24 ports Ethernet - Fibre Con 24



and IEEE 802.3 base FL• Available with MT-RJ connectivity

AccessoriesTelco to TelcoTelco to RJ45

2m3m5m

on request

610.037610.038610.039

on request

610.037610.038610.039


21

Fibre Con 12

on request

610.037610.038610.039

Fibre Con 24

Fibre Con Product 12 MM(ST)609.001

12 MM(SC)609.101

Ordering Codes

12 SM(ST)609.102

Fibre Con Product 24 MM610.041

Ordering Codes

24 SM(SNMP)610.040

AccessoriesNetwork managementPCB upgradeTelco to RJ45

2m3m5m

610.055

610.037610.038610.039

not needed

610.037610.038610.039

ETHERNET • ETHERNET • 10 Mbps Ethernet Mini Hub Fibre Share TP3+ Copper Share TP3+

Fibre Share TP3+ and Copper Share TP3+ products have been designed to extend the number of user interfaces without increasing the number of switched ports and by re-utilising the current network infrastructure, which can be paramount in areas where space availability for cabling is critical.

ETHERNETETHERNET • Fibre Con 1 PC

The Nexans Fibre Con 1 PC converts an independent Twisted Pair node connection (IEEE802.3 10BASE-T) into an 10BASE-FL optical connection. This permits adaptation to a future-proof optical infrastructure with practically unlimited bandwith, without the 100 m distance limitation of Twisted Pair cab-ling.

Fibre Con ProductFibre Con 1 PC MM (ST)Fibre Con 1 PC SM (ST)


22

Ordering CodesFibre Con 1 PC

609.131609.132

Fibre/Copper Share TP3+

ProductFibre Share TP3+ MM(ST), ivoryFibre Share TP3+ MM(ST), whiteFibre Share TP3+ MM(SC), ivoryFibre Share TP3+ MM(SC), whiteFibre Share TP3+ SM(ST), ivoryFibre Share TP3+ SM(ST), whiteCopper Share TP3+, ivoryCopper Share TP3+, ivory

AccessoriesSocket power supply unitFloor box power supply unitCable duct power supply unitCascading cord, L= 0.2mTP adapter cord, L= 1mTP adapter cord, L= 3m

Ordering Codes

601.061601.063601.062601.064601.095601.096603.022603.021

601.065601.066601.068601.081601.082601.084


23

FFASTAST ETHERNETETHERNET • Fibre Con M - module Fibre Con 200

Nexans Fibre Con M enables to work on a fibre infrastructure with hubs, routers or switching systems incorporatingTwisted Pair interfaces. Its modular concept provides ability to work with mixed configurations incorporating either 10Mbps or 100 Mbps.• Converts twisted pair interfaces in optical interfaces• Compliant with IEEE 802.3u 100 base T and 100 base FX• Available with ST or SC connectivity

FFASTAST ETHERNETETHERNET • Fibre Con 1200

Nexans Fibre Con 1200 enables to work on a fibre infra-structure with hubs, routers or switching systems incorpora-ting Twisted Pair interfaces.

• Converts twisted pair interfaces in optical interfaces• Compliant with IEEE 802.3u 100 base TX and

100 base FX• Available with ST , SC or MT-RJ connectivity

Fibre Con 1200

Fibre Con ProductFibre Con M Fibre Con 200 MM (ST)Fibre Con 200 MM (SC)

Ordering Codes

610.070610.073610.072

AccessoriesBlind UnitTelco to RJ45

2m3m5m

610.074

610.037610.038610.039

AccessoriesTelco to RJ45

2m3m5m

610.037610.038610.039

Fibre Con Product 1200 MM(ST)610.045

1200 MM(SC)610.035

Ordering Codes

1200 SM(ST)610.036

Fast EtherFast Ethernet • net • Media Converters - 24 ports Fast Ethernet - Fibre Con 2400



and 100 base FX

Fast EtherFast Ethernet • net • 100 Mbps Fast Ethernet Mini Hub -Fibre Share 100S

Fibre Share 100S has been designed to extend the number of user interfaces without increasing the number of switched ports and by re-utilising the current network infrastructure, which can be paramount in areas where space availability for cablingis critical. Fibre Share 100S can be installed in floor boxes, cables ducts aswell in communication poles.


24

Fibre Con 2400

Fibre Con Product

AccessoriesNetwork managementPCB upgradeTelco to RJ45

2m3m5m

2400 MM610.031

610.055

610.037610.038610.039

Ordering Codes

2400 SM(SNMP)610.030

not needed

610.037610.038610.039

ProductFibre Share 100S MM(SC), ivoryFibre Share 100S MM(SC), whiteFibre Share 100S SM(ST), ivoryFibre Share 100S SM(ST), white

Ordering Codes

Fibre Share 100S

601.051601.089601.053601.092

FFASTAST ETHERNET ETHERNET • Fibre Con 100

The Nexans Fibre Con 100 PC converts an independent TwistedPair node connection (IEEE802.3u 100BASE-TX) into an100BASE-FX optical connection.This converter supports simultaneous transmission and reception(full-dupplex) at 2x 100 Mbps over distances of up to 2000 m.It enables you to quickly and easily build up and extend Ethernetnetworks

FFASTAST ETHERNETETHERNET • Fibre Con 100 PC

Fibre Con 100 PC modules are used in “fibre to the desk” applications.These modules, in the form of plug-in cards for PCs, provide optimum conditionsfor switching and multimedia applications. The Fibre Con 100 PC card isconnected via an external twisted-pair cable to a Fast Ethernet card in the PC.


25

Fibre Con 100 PC (ST)Fibre Con 100 PC (SC)

Ordering Codes

Fibre Con 100 PC

610.021610.020

Fibre Con 100

Fibre Con ProductFibre Con 100 MM (SC)Fibre Con 100 SM (ST)

Ordering Codes

610.010610.011

SNMP Network Management Unit • FibrSNMP Network Management Unit • Fibre Con MSe Con MS

Fibre Con MS is a management and monitoringsystem for networks requiring security andavailability, such as healthcare environment, airports, banks, insurances ormilitary facilities.

FibrFibre Con Backup Power Supplye Con Backup Power Supply

The Nexans Fibre Con Backup Power Supply improves thesecurity of optical network architectures. The backup systemallows not only the backup of power units of up to six 19-inch media converter systems, but also the backup of acomplete primary mains circuit. With this feature a redundant power supply connection by two separate current circuits can be installed easily and efficiently.

Fibre Con ProductFibre Con MSFC MS Temperature Sensor (External)FC MS Humidity Sensor (External)FC MS Combi Sensor (External/Temperature + humidity)FC MS Room Control (External infrared sensor)FC MS Smoke Sensor (External)FC MS Vibration Sensor (External)


26

Ordering Codes

Fibre Con MS

610.050613.080613.081613.082613.083613.084613.085

Fibre Con Backup Power Supply

Fibre Con Backup Power Supply

Ordering Codes

610.051

AccessoryFC BPS Connection Cord 610.052

27

Quick Mount Cabinets

Extremely easy and fast to install and hence very cost effective, thanks to

• delivery in separate parts which can be handled by only one person• fast and flexible mounting within a few minutes• open structure which allows a free accessibility from all sides• automatic earthing• easy to add extensions or to replace panels•19” profiles on front and rear sides• Overall height : 2070 mm

Cabinets

SSttrruuccttuurraall HHaarrddwwaarree

5.1

19” shelf 36 - 42 HU ( 70 kg ) 2 Fix.points19” shelf ( Max.70 kg) with 4 Fix.points19” Sliding shelf Pull out 1/3 - Max. 30 kg

303.162303.163303.164

42 HU Quick Mount Cabinet (800 x 800 )Extension Quick Mount Cabinet

330.001330.101

Ordering Codes

Accessories

Standard Cabinets

These attracively styled cabinets are the basis for housing all Nexans CablingSolutions componentsThe cabinets come fully equipped with internal frames on front side for patchpanels, active equipment, connection modules and the patch guides organise thecable and patch cord layout. They can be equipped with fixed internal frames orswing frames.

Additional Frame 42 HU19” shelf 36 - 42 HU ( 70 kg ) 2 Fix.points19” shelf (Max.70 kg) with 4 Fix. points (*)19” Sliding shelf Pull out 1/3 - Max. 30 kg (*)Ventilator fan ( 220V ) + Power cable

203.257303.162303.163303.164203.161

42 HU, 800x800 preassembled complete42 HU preassembled extension42 HU kit complete42 HU kit extension

300.157300.160300.161300.163

Ordering Codes

Accessories

Overall height : 2100 mm

(*) Additional frame needed

28


Wall Mountable 19” Cabinets

• Hinged 3 parts design for easy access• Extremely accessible swing frame design• Top and bottom cable entry facilities• Same functionalities as a full size cabinet :

19” mounting frame, Overall width 650 mmlateral cable rings, etc...

• Ideal for locations where space is at a premium.

19” shelf for 12/18 HU Cabinets 203.167

12 HU AC (625 x 500)18 HU AC (892 x 500)

102.157102.191

Ordering Codes

Accessory

Open Frames

• Steel sheet frame made up of :- 2 uprights for racking- 1 cross tie- 1 rigid base

• Integrated cable entry, which allows a setting up on false floor• Easy and speedy assembly• Suitable for placing in rows• Installation in rooms where space is at a premium• H x D x W : 2000 x 600 x 522

Open Frame Basis Kit 42 HU (Ind.Pack.)Open Frame Basis Kit 42 HU (3 Pcs/Packing)19” shelf (Max.70 kg) 2 Fix. points

203.173203.163303.162

Ordering Codes

Accessories Kit for Open frame including10 patch rings3 cable guides1 wall mounting bracket

203.164

29

Cable Management


5.2

Patch Guides & Cable Guides

The Omega series comprises a complete range of Modular Patch Panels.For an orderly installation, Omega offers a full range of cable managementaccessories :

• Patch guides allow for an orderly cord storage• Blind plates cover unused positions in the cabinet• Clip-On cable guide for fast and reliable cable retention and grounding.

Blind Plate 2HUBlind Plate 3HU

109.202109.203

Patch Guide 2HU ( Large Bending Radius ) Patch Guide 1HUCable GuideCable Guide with Clip-On

102.126202.106102.130109.130

Ordering Codes

Comfort Tool for toolless Snap-inDH8 punchdown Tool

420.690410.090

24 x keystone clipsCable Clamp LANmark PCB Outlet (200 per bag)

429.620470.010

Cable Guide with Clip-On Patch Guides & Blind Plate

Accessories5.3

Power Bar 19”,1HU, 6 UTC outlets + automatic FusePower Bar 19”, 1HU, 6 SUCCO outlets + automatic Fuse

203.160203.160A

Paris72, Avenue de la Liberté92723 Nanterre CEDEXFranceTel +33 (0)1 55 51 59 52Fax +33 (0)1 55 51 52 80

BrusselsAlsembergsesteenweg 2, b31501 BuizingenBelgiumTel +32 (0)2 363 38 00Fax +32 (0)2 365 09 99

LondonFelixstowe Road, Abbey WoodLondon SE2 9AAUnited KingdomTel +44 (0) 208 557 3456Fax +44 (0) 208 557 3535

www.nexans.com/ncs

Copper Cabling Solutions

LANmark

For Copper Solutions,please refer to our

LANmark Copper Cabling Solutions brochure

Documents

Fibre Optic Cabling Solutions