2
Finding Ways to Ensure Your Garage Door Works There are many people that have garage doors and take them for granted on a daily basis. When you own a home that uses a garage door, you should be sure that you understand how you are going to go about being wise about the way that you are going to fix the garage door. As you are learning how you are going to fix the garage door you should make sure that you take time to learn more about the system. With a little knowledge concerning what you should do when the garage door breaks, you may be able to ensure that you can fix it on your own. Inspecting the Track First, you should be sure that you are checking the entire track for your garage door. Whether your garage door is electric or you have to push it up and down there will be a track that allows the garage door to go up and down and you want to identify that track in your garage. After you have found the track, you should be sure that you can take the time that you need to get high enough so that you can inspect it. Find a footstool that you can use to ensure that you can have an accurate view of the entire track and that you can inspect the entire track. You want to make sure that you take your time when you are looking at the track you should start by looking for any obstructions. There may be something in the track that is preventing the door from going up and down, and you want to make sure that you can find and remove it. While you are looking through the track you should also make sure that you can identify any dents or bends in the track. Make sure that you take the time that you need to understand how you are going to fix those dents or bends so that the track will not have any obstructions. Some people will hammer out the track to ensure that the dent is gone. You have to make sure that you do not hammer too hard and you may want to use a rubber hammer to ensure that you are going to actually straighten out the track rather than make a new problem on the track. After you have looked through the track you should also make sure that you take the time that you need to understand how to ensure the track is level. If the track is slanted at all you may find

Finding Ways to Ensure Your Garage Door Works

Embed Size (px)

DESCRIPTION

 

Citation preview

Page 1: Finding Ways to Ensure Your Garage Door Works

Finding Ways to Ensure Your Garage Door Works

There are many people that have garage doors and take them for granted on a daily basis. When

you own a home that uses a garage door, you should be sure that you understand how you are

going to go about being wise about the way that you are going to fix the garage door.

As you are learning how you are going to fix the garage door you should make sure that you take

time to learn more about the system. With a little knowledge concerning what you should do

when the garage door breaks, you may be able to ensure that you can fix it on your own.

Inspecting the Track First, you should be sure that you are checking the entire track for your garage door. Whether

your garage door is electric or you have to push it up and down there will be a track that allows

the garage door to go up and down and you want to identify that track in your garage.

After you have found the track, you should be sure that you can take the time that you need to

get high enough so that you can inspect it. Find a footstool that you can use to ensure that you

can have an accurate view of the entire track and that you can inspect the entire track.

You want to make sure that you

take your time when you are

looking at the track you should

start by looking for any

obstructions. There may be

something in the track that is

preventing the door from going

up and down, and you want to

make sure that you can find and

remove it.

While you are looking through

the track you should also make

sure that you can identify any

dents or bends in the track. Make

sure that you take the time that

you need to understand how you are going to fix those dents or bends so that the track will not

have any obstructions.

Some people will hammer out the track to ensure that the dent is gone. You have to make sure

that you do not hammer too hard and you may want to use a rubber hammer to ensure that you

are going to actually straighten out the track rather than make a new problem on the track.

After you have looked through the track you should also make sure that you take the time that

you need to understand how to ensure the track is level. If the track is slanted at all you may find

Page 2: Finding Ways to Ensure Your Garage Door Works

that the garage door in Sacramento does not have the power to make it up the uphill battle of the

track.

Find a level and place the level throughout the track. You should make sure that the level shows

that the track is not angled and if you find that the track is not level you are going to want to go

back through and adjust the track to make sure that it is as level as possible.

As you are trying to level the track you want to make sure that you take the time that you need to

understand how you are going to find the mountings. When you are looking for the mountings

you will want to find the hardware that connects the track to the wall or to the garage.

Repairing the Track When you have found this hardware you have to make sure that you are going to unscrew the

screws gently so that you can move the track. While you are moving the track you want to make

sure that you are slowly adjusting it so that you can be sure you do not overcorrect.

As you are moving it, you will want to see if you can screw the mountings back into place. If

you find that you are not going to be able to screw the mountings into place you will then have to

make sure that you are wise about the way that you are going replace the mountings.

If you do not feel comfortable doing this, you should be sure that you find a professional to help

you do this. Take the time that you need to ensure the job is done well so that your garage door

can work well for you.