FINISHES AND SPECIFICATION DOCUMENT

FINISHES AND SPECIFICATION DOCUMENT

*Criteria for choosing supplier

• Appropriate grade of ware.

• Locally sourced product.

• Product made from natural material.

CARPETS

Code Specification

Product code

and color Image

FLR001

DESCRIPTION:

Broadloom carpet 3.70m wide, manufactured from 100% BCF

polypropylene, installed with no cross-joints and to be laid

directly onto substrate in accordance

with the SANS 10186 code of practice

Deem to comply specification: Textile carpet with broadloom

construction with SANS location grade U5 (Heavy commercial),

fire index class 3. All to comply with SANS 1375

Avance AC06

Colour: AC6c

Criteria for choosing supplier

• Technical pre-sale assistance in choosing correct application

• 15 year+ comprehensive product guarantee

• Availability of products

• Product ranges that extensively available over a long period of time

• Although Plascon is used below, Dulax paint also meets the criteria.

WALL PAINT

Code Specification

Product code

and color Image

WL001

SUPPLIER NAME: PLASCON

DESCRIPTION:

Surface to be dry, sound and clean and cured for a minimum of

14 days, with a moisture content measured with a dozer

hygrometer (or equivalent), of BD

2 scale- 8% or less. Prime with one coat Plascon Plaster Primer

(UC 56) with

an overcoating time of 16 hours and finish with two coats

Cashmere (CAS) with 2 hours drying time between coats, for a

maintenance cycle of 7 years in a C1 inland environment.

Deem to comply specification:

High quality washable acrylic Emulsion paint suitable for exterior

use to plastered wall to approval and complying with SANS

1586 and 103055. Applied to Manufactures specifications. Cashmere

Amazon Mist Y5-

E2-3

WL002 Accent color to be applied on one wall

Plascon

equivalent to

Pentone 172

Criteria for choosing supplier

• Choice of type of suspended ceiling depends on acoustic requirements of the space use

CEILING

Code Specification

Product code

and color Image

CEI

SUPPLIER NAME: LAFARGE

DESCRIPTION:

Gypsum lay-in grid ceiling system with 1200x 600 x12mm thick

square edged Jumbo Fissured vinyl ceiling tiles, laid on

15x38mm

high double stitched main tees at 1200mm centres and with

15x38mm high cross tees at 600mm centres with galvanised

exposed face all in colour white, including necessary grids,

locking

type end clips, fire expansion punch outs to main tees, etc.

suspended by 25 x 0,8mm galvanised strapping at not

exceeding

1200mm centers, Ceiling perimeter to be finished using 34

x40mm shadowline wall angle, all in accordance with SABISA

(South Africa Building Interior System Association) installation

guides.

Deem to comply Specification:

Mineral fibre 1200/600 x600 suspended removable ceiling

panels complying with SANS 637 White Fissured

BLINDS

* Criteria for choosing supplier:


• Availability of products.

• Product ranges that extensively available over a long period of time.

Code Specification

Product code

and color Image

BLI

DESCRIPTION:

Basswood 50mm blinds


Indoor venetian blinds to SANS 947

Similar / Approved by architect / project manager Whitewash

LIGHTS

Lighting installations and the required lux levels must be installed by a professional Electrician by using the following guidelines:

• Make use of power saving light fixtures

• Use task lighting instead of general lighting.

Code Specification

Product code

and color Image

LIG

DESCRIPTION:

LED Fitting 600x600 with diffuser 3 lights

Osram LED Tube ST8V1.2MM 16W cool white.Cool white

WALL CABINETS

Code Specification

Product code

and color Image

CAB

DESCRIPTION:

Door: 16mm Thick chipboard laminated in melamine four-sided

Full wrap post form.

Hinges: Internal concealed Grass type and quality with

minimum 100 000 cycle test guarantee.

Handles: Pair on Union aluminum 587 Cedar pull handles size

111mm with

Anodized Silver finish, code AL587-111BTAS, bolt-through. LOCKS

on all door: CISA drawer and cupboard lock code 71550-20 23

12 including cylinder rose and key 01420, finishes in nickel plated

steel.


Steel furniture to SANS 757

Stain type powdered coated finish to SANS 1274

Dove grey doors

with white

carcass

• NOTES: Detail shopfitting drawings to be provided by the CSIR Interior Architect.

BATHROOMS

*Criteria for choosing supplier

• Appropriate grade of ware.


• Product made from natural material.

BATHROOM FLOORS

Code Specification

Product code

and color Image

BAF001

DESCRIPTION:

Full bodied double pressed porcelain tiles (NON-SLIP) complying

with SANS 1449/13006 fixed to floor screed with approved tile

adhesive mixed with bonding liquid in lieu of water joints ground

with tile ground with minimum 5mm expansion joints at

perimeter, all structural expansion and

construction joints and maximum 5m centres internally and at

3m centres externally, in both

directions All to manufacturers specifications.


Ceramic tiles to SANS 1449/13006

NOTES: Grout: Dove grey

Shade gray

without stone

finish.No beiges, terracotta’s

or sand colours

BATHROOM WALLS

Code Specification

Product code

and color Image

BAW01

DESCRIPTION:

Full bodied double pressed porcelain tiles (NON-SLIP) complying

with SANS 1449/13006 fixed to floor screed with approved tile

adhesive mixed with bonding liquid in lieu of water joints ground

with tile ground with minimum 5mm expansion joints at

perimeter, all structural expansion and construction joints and

maximum 5m centres internally and at 3m centres externally, in

both directions All to manufacturers specifications.


Ceramic tiles to SANS 1449/13006

NOTES: Grout: Dove grey or white

Similar / Approved by architect and project manager

Shade light gray

without stone

finish.

BAW02

Douglas Jones 435 - 48 x 48 mm Mesh Backed Slate Mosaic Tile -

Charcoal Black Colour - Code BAWMo1 . Fixed with Tal

adhesive and flush pointed with Tal jointing compound (All tiling

to be laid with 5mm maximum consistent joints between tiles)

laid and sealant to Manufacturer's specification

charcoal, grout

grey

VANITY SLAB & SANITARY FITTINGS

Code Specification

Product code

and color Image

VAN

30mm "macadamia eezi quartz" top with 450

Mitred joint, 2 –

3mm Bevel on surface edge, fixed to supports using dab of

100% clear silicone adhesive. Top to be Min 825mm wide x

870mm high above floor level, 300mm downstand to cover

service below vanity slab. White

BASW01

DESCRIPTION:

WC: Vaal Sanitaryware Entice vitreous china 90 degree outlet

back inlet wall hung closed rim pan colour White (Code:

439600WH) fixed on and including bolt-through-the wall bracket

(Code: 80844Z0) with concealed back inlet flushvalve (

elsewhere specified) and Themoplastic soft close seat.


Ceramic water closet to SANS 497

white

Code Specification

Product code

and color Image

BASW02

DESCRIPTION:

Flush device: Geberit Kombifix concealed cistern for wall hung

WC (article no. 110.350.00.5), front actuated with Samba dual-

flush actuator (article no. 115.770.46.1) in chromium plated

“matt” finish, including flush pipe and pan connector, water

supply connection with angle stop valve, protection cover for

service opening and protection cover for flush pipe, fixed with

included fasting materials inside solid wall from 120mm up to

200mm. All with Geberit conditional guarantee.


Flush valve to SANS 1240

Matt chrome

BASW03

DESCRIPTION:

Vaal Sanitaryware 415 x 275x 315mm Flatback white vitreous

china wall mounted urinal including 38mm chromium plated

domical grating (code: 8787Z0) and chromium plated top inlet

spreader (code:8543Z0).


Ceramic urinal to SANS 497

white

Code Specification

Product code

and color Image

DESCRIPTION:

Geberit HyTouch Samba pneumatic urinal actuator (article no.

116.011.46.1) finishes in chromium-plated “matt” including

housing (article no. 116.001.00.1) with shut off valve, flush pipe

(article no 119.704.16.1), inlet set (article no. 152.489.16.1) and

urinal trap ( article no.

152.983.00.1).


Ceramic urinal to SANS 1240

Matt chrome

BASW04

DESCRIPTION:

HWB: Ceramic wall mounted concealed waste slab basin with

tap ledge, colour White (Code: L87S), size 560 x460 x200mm with

one taphole, fixed to wall manufacturers specification and

sealed with abe Dow Corning acetoxy silicone sealant where

basin meets wall


Ceramic wall mounted hand wash basin to SANS 497

White

BASW05

DESCRIPTION:

Cobra Watertech Karoo 15mm chrome plated single lever basin

mixer restricted to 6l/min maximum flow (Code: KO-951)

manufactured in accordance with SANS 1480:2005 BS EN

1286).


Metal water tap to SANS 226

Polished chrome

Code Specification

Product code

and color Image

CUBICLE IRON MONGERY

DESCRIPTION:

DOR001 Door stop half-moon chrome Polished chrome

DOR002

Stainless steel brushed modern handle, back to back, bolt

through

Length: 300mm

Dimensions: 300mm x100mm

Diameter: 19mm

Stainless steel

ACCENT COLOR INSPIRATION

Documents

FINISHES AND SPECIFICATION DOCUMENT