FIRE FIGHTING SYSTEMS CATALOGUE - Righetto Serbatoi · FIRE FIGHTING SYSTEMS CATALOGUE. ... In compliance with UNI EN 12845/15, UNI 11292, UNI 10779 Most of the fire fighting systems

UNDERGROUND SYSTEMS

FIRE PUMP COMPARTMENT

PRESSURIZATION GROUP

FOAM FIRE FIGHTING SYSTEM

OUTDOOR SYSTEMS

FIRE FIGHTING SYSTEMS CATALOGUEFIRE FIGHTING SYSTEMS CATALOGUE

UNDERGROUND SYSTEMS

FIRE PUMP COMPARTMENT

PRESSURIZATION GROUP

FOAM FIRE FIGHTING SYSTEM

OUTDOOR SYSTEMS

COMPLETE RELIABILITYA reliable group founded in 1988 from the merger between two historical companies of the sector. Righetto Serbatoi

Srl study, design and realize a range of tanks for transport and distribution of liquids, with different certifications. Our

headquarters have 3600 m2 of workshop, 700 m2 of offices and 3400 m2 of outdoor external area. The building

has a photovoltaic system with 183KW of power. Righetto Serbatoi guarantees the utmost safety and functionality

in the design of their products.

NO COMPROMISE Our employees work hard every day, dedicating all their quality, experience, professionality and ideas so that

Righetto Serbatoi can always offer new solutions, efficient services and better products.

NO COMPROMISE Righetto Serbatoi Srl products are manufactured using only first quality materials, with the aim of keeping

their characteristics constant on the long term. Great attention is put in all details, including the choice of the

accessories and of the control and safety devices. Total warranty: each tank is tested and certified. It is possible to

track down the product and individuate each component.

360° TANKS Righetto Serbatoi Srl are among the few manufacturers present on the market who offer a complete range of tanks

and steel sheet processing solutions, specifically studied for the fuel storage, transport, distribution and refuelling.

Our products satisfy different type of needs: from refueling to agriculture and gardening, from the transportable

refuelling solutions to the underground or aboveground stocking tanks, from the fire fighting systems to the storage

of waste oils. Righetto Serbatoi continuously improve and expand their production, studying new solutions, using

top quality materials, installing with the most innovative technological accessories.

2 3

4 5

ind

ex

OUTDOOR SYSTEMSBTE model

VPE model

BTV model

page 8|9

UNDERGOUND SYSTEMSVPL model

VPE model

BTS model

BTS vertical model

Cabi

page 16|17

FIRE PUMP COMPARTMENTS page 28|29

PRESSURIZATION GROUPSNormalized

Vertical turbine pumps

Pilot

page 32|33

FOAM PLANTS page 38|39

INTEGRATED FIRE FIGHTING SYSTEMSIn compliance with UNI EN 12845/15, UNI 11292, UNI 10779

Most of the fire fighting systems currently installed, which use the pressure of the water systems, are outdated

and do no longer comply with the most recent norms, and it is now necessary to create independent water

storage units, able to autonomously supply water to all water fire fighting systems. Righetto Serbatoi design a

wide range of integrated fire fighting systems, assembled in full compliance with the most recent norms, with the

aim of achieving a single system with its complete CE certificate, easy to install and ready for the connection to

the electric and water systems. The variety of versions offered is sufficient to satisfy all requirements in civil and

industrial use, and in full compliance with UNI 11292 norm.

CONSTRUCTION TYPE CHARACTERISTICSAll our tanks are manufactured with top quality carbon steel S235JR, in accordance with UNI EN 10025 norm, they are internally and externally welded with arc submersed and mig process. The tanks undergo testing for 12-24 hours. Welding procedures are in compliance with UNI EN ISO 15614-1, the Righetto Serbatoi welders’ qualifications are in accordance with EN 287-1 norm.

ACCESS ROOMSThe access rooms to the tanks and to the technical rooms are equipped with lockable lids and removable grid. Extensions are available on request for coupling to be made on site.

SYSTEM COUPLINGSAll the suction and vent couplings are in compliance with UNI norms and their sizes are in accordance with UNI EN 12845 and UNI 10779 norm. The filling valve is in stainless steel and is high-pressure PN16 type, equipped with float. In case the tank is a reduced capacity type, two valves are used, in accordance with clause 9.3.4 of UNI 12845 norm.

COATINGSThe external coating of the underground tanks is in endoprene, with minimum thickness 800 micron, sufficient to block underground electric currents shocks, in conformity with EN 12285 norm, clause 1.03. Above-ground tanks are painted with acrylic catalyzed paint thick 100/120 micron. All inner coatings are in epoxy-catramine medium thickness 150 micron.

TECHNICAL ROOMThe technical room is designed in compliance with UNI 11292, clause 5, with fire resistance R60 degree. The working area (2400 mm internal height, 800 mm free space on the three sides of the pumps) and the ventilation grids have sizes according to UNI 11292, clause 5.4. The walkable floor is made of non-slip material without gaps and reinforced in order to withstand the weight of the pumps, as per clause 5.3.

PRESSURIZATION GROUPIt is installed inside the technical room and can includes horizontal centrifugal pumps or vertical turbine pumps. All options are equipped with testing circuit with capacity meter, according to UNI EN 12845, UNI 10779 and UNI 11292 norm.

ELECTRIC SYSTEMThe electric system in the technical room is designed in compliance with CEI EN 61439, CEI 164-8 and CEI EN 60204.1 norms, with a control board for the auxiliary connections as per UNI 11292 clause 6 (lighting, ventilation, water level, heating, draining pumps, water presence probe).

CERTIFICATIONSThe certifications available and the normative references for our fire safety systems are:

- 2006/42/CE Machine Directive.- 2006/95/CE Electromagnetic Compatibility Directive.- CE Conformity Declaration.- UNI EN 12845 – UNI 10779 – UNI 11292 Declaration of Conformity.- Test protocols for the pump group and for the tank.

DOCUMENTSThe documents issued for our integrated fire-fighting systems are: - Use and maintenance manual.

- Electric and connections diagrams.- Installation diagrams and technical detailed drawings of the products.

Direct access to the technical room through an entrance with min. width 800 mm and min. height 2000 mm, a fixed internal stairway, a circular or straight (double) type. Removable and vertical ladders are no longer accepted , ref. clause 4.2.2.

Two anti-flooding bilge pumps, min. capacity 10 m3/h, one of which has its independent power source and an alarm system, ref. clause 6.3.2

A water alarm system with remote connection, clause 6.3.2.

An adequate ventilation system in the technical room. Especially in presence of a motor driven pump an air extraction device must be installed with its air vents and designed taking into consideration the power of the engine.

A bilge pump and a forced air extractor emergency battery against potential problems due to interruptions of the electric supply.

An auxiliary lamp should be installed (min. 200 Lux) and an emergency one (min. 25 Lux for 60 mins.), ref. clause 6.2.1.

The rooms’ internal dimensions and distances should allow an easy maintenance on the pump group and on the main control board, with the operators protected by external atmospheric conditions, ref. clause 5.2.2.

The floor should be flat, uniform and not slippery, ref. clause 5.3.

One or more fire extinguishers should be installed, with rating plate, ref. clause 6.7.

MAIN NORM REQUIREMENTS

6 7

OUTDOOR SYSTEMSThe integrated outdoor fire fighting systems are an effective and ideal solution, thanks to the easiness of

installation and maintenance procedures.

In particular, only a flat concrete supporting base is required for the installation, and its dimensions should be

determined by a qualified technician.

Maintenance is a simple process as the tank and its connections are clearly visible from the outside and the

pump compartment is accessible, therefore all requested inspections can be easily carried out.

8 9

BTE MODel

10 11

Pump group complete with electric driven pump and pilot pump, including control board and relevant accessories.

Vertical front door type R60, width 800 mm, height 2000 mm, according to norm UNI 11292, clause 4.2.2.

Electric fan voltage emergency battery (motor driven pump) against interruptions of electricity, according to UNI EN 11292, clause 5.4.2.

Tight mesh walkable grid or convex steel sheet, non-slip type, above ground for safety reasons, according to UNI 11292.

Optional possibility of connecting the loading and suction pipes inside the technical room, in order to avoid risks due to low outside temperature.

Supporting saddles welded to the tank, 50 mm high above the ground, preventing metal corrosion due to potential water stagnation.

Pump room with sandwich panels R60, with optional side openings (should the dimensions of the pump group require that). The technical room is designed to allow inspection by one or more opera-tors contemporarily, in total safety and protected by the external environmental conditions, according to UNI EN 12845.

Electric fan for forced air exchange, operating even in case of interruption of electricity, including grid, according to UNI 11292, clause 5.4.2.2.

Suction pumps’ couplings with plate filter, eccentric pipe reducer, vibration damped discharge coupling, isolator valve etc. according to UNI 11292, clause 9.3.5.

Outdoor system with flooded suction installation, including a storage steel tank and a technical room complete

with R60 sandwich panels. This version consists of a monoblock structure with external front access door.

1

4

7

2

5

8 9

3

6

1 9 5 26 8743

Dimensions and capacities shown are purely indicative as modifications might be possible, special tanks and products are available on request.

VPE MODel

Electric fan for forced air exchange, operating even in case of interruption of electricity, including grid, according to UNI 11292, clause 5.4.2.2.

4. Pump group complete with electric driven pump and pilot pump, including control board and relevant accessories.

Electric fan voltage emergency battery (motor driven pump) against the interruptions of electricity, according to UNI EN 11292, clause 5.4.2.

Supporting saddles welded to the tank, 50 mm high on the ground, preventing metal corrosion due to the water stagnation.

Technical room general switchboard with protection devices, single phase electric connection, thermostat for fan start, liquid level control device, optional remote connection for alarm signal in compliance with UNI 11292.

Heater with probe and adjustable thermostat installed on the water storage tank for preventing freezing (available also for mod. BTE and BTV).

Front door access R60 type with optional possibility of double doors for the installation of large pump groups. Walkable floor in convex steel, with reinforcement supports, as per UNI 11292.

Outdoor system with flooded suction installation, complete with a storage steel tank and a technical room in

a mono-block structure with external frontal access door. The dividing element is made of a dished end with

reinforced supports.

1

4

7

2

5

3

6

5 7 3

6

4 21


12 13

Electric fan voltage emergency battery (motor driven pump) against interruptions of electricity, according to UNI EN 11292, clause 5.4.2.

BTV MODel

Detailed view of a suction connection 1,8 mt/s in a flooded suction installation, according to UNI EN 12845, clause 10.6.2.

Pump group complete with electric pump and pilot pump, including control board and relevant accessories

Water storage tank ready for coupling with technical room by means of nuts and bolts.

Example of mechanical stress analysis, extract from a tank design technical project, issued by a qualified engineer.

Fixing of the technical room to the concrete ground by means of chemical plugs, bolts and threaded bars, as per the project.

Manhole diam. 600 mm heavy type for inspection.

Vertical outdoor system complete with a storage tank and a technical room with pump compartment underneath

the tank, with supporting structure designed in compliance with the highest safety criterias. Flooded suction

installation type.

1

4

7

2

5

3

6

2

7

6

5

4

1

3

14 15

UNDERGROUND SYSTEMSThe integrated fire fighting systems are an ideal and effective solution should an above-ground installation not

be possible due to lack of space.

This system can be installed underneath traffic areas, thus enabling to use all available space above the

installation site of the tank. A huge advantage, also considering that the system is protected by external

temperature fluctuations, as the ground has constant temperature 10°.

16 17

VPL MODel

Access room with R60 type panels and with front door opening towards the outside, dim. 800 x 2000 mm.

Electric fan emergency battery (motor driven pump) against lack of electricity, according to UNI EN 11292, clause 5.4.2.

Electric fan for forced air exchange, operating even in case of interruptions of electricity supply, including grid, according to UNI 11292 – clause 5.4.2.2.

Auxiliary lamp (min. 200 Lux) with integrated emergency lamp (min. 25 Lux x 60 min.) ref. clause 6.3.2. according to norm UNI 11292.

Electric 2000 W heater complete with thermostat.

Bilge pumps with capacity 10 m3/h., one of them connected to an emergency battery against interruptions of electricity, including floats and an additional water alarm probe according to UNI 11292.

Pump coupling collector mounted on double skids complete with capacity meter.

Double staircase with non-slip steps, double handrail according to UNI 11292 clause 4.2.2. and stairway in compliance with UNI 10803 and UNI 10804 norms.

Pump group complete with electric pump, motor pump, mounted on separate skids, in order to allow corridor type lay out.

Underground system with flooded suction installation, complete with a water storage tank, an extended technical

room with double stairway, landing and outside access room.

1

4

7

2

5

8 9

3

6

1

7

2 3 48 9 5 6


18 19

VPS MODel

Railing h. 1100 mm in compliance with norm UNI 10803 – UNI 10804 with extensions for coupling with the entrance room.

Walkable floor in convex sheet steel, pump group complete with electric pump and motor pump installed on a skid, separated in a corridor lay out according to UNI 11292 norm.

Suction pumps’ couplings with plate filter, eccentric pipe reducer, vibration damped discharge coupling, isolator valve etc. according to UNI 12845.

Fitting for the anchoring to the concrete base, anti-overturning supports in case of ground water presence, reinforcement plate and rings for the structure sturdiness.

Rain proof cover for the stairway with sliding cover plate made of galvanized profiles and galvanized steel sheet (optional).

Bilge pumps with capacity 10 m3/h., one of them connected to an emergency battery against interruptions of electricity, including floats and an additional water alarm probe according to UNI 11292.

Filling valve in stainless steel, high pressure type, with float on the spill-proof sump.

Vertical access door R60 type, double stairway with non-slip steps, double handrail in compliance with norm UNI 11292, clause 4.2.2. and stairway norms.

Pump coupling collector mounted on double skids complete with capacity meter.

Underground system complete with a water storage tank, a technical room and open entrance hall from the

outside, with handrail, staircase.

1

9

2

7

10 11

3 4

86

1

2 3 4 5 611

11

9 1087

5


20 21

BTS MODel

Pumps room with sandwich panels R60 type with side openings (in case the group pump should require that). The operators work in total safety being protected by the external environmental conditions, according to UNI 11292, clause 5.2.2.

Coupling for suction pumps tubes complete with its relevant elements.

Pump group complete with electric and motor driven pump and pilot pump with control board and relevant accessories.

Electric fan, operating even in case of interruptions of electricity, including grid according to UNI 11292, clause 5.4.2.2.

Industrial muffler for engines > / = 30 kW installed on the top of the room and connected to the motor pump through an insulated tube.

Fuel tanks with (capacity 500 liters) for the pump supply, with filling valve, float, couplings and connection probes for remote control.

Suction pumps couplings with plate filter, vibration damped discharge coupling etc. complete with fixing system able to withstand the pump group weight.

System complete with an outside R 60 box for technical room and with an underground water storage tank, with

vertical pumps in flooded suction system.

1

7

5

8 9

64

2

8

9

1

3 47 65

Auxiliary control board, level indicator and electric fan emergency battery against interruption of electricity (motor driven pump) according to norm UNI 11292, clause 5.4.2.

3

Vertical front access door R60 type dim. 800 x 2000 mm, according to norm UNI 11292 clause 4.2.2.

2


22 23

BTS-Vertical MODel

Pump room with sandwich panels R60 type with side sliding doors. Operators can access and work on the control board in total safety, protected by the external environmental conditions, as per UNI 11292, clause 5.2.2.

Detail of an electric driven motor with vertical axe.

Submerged pilot pump connection to the main skid.

Vertical axes’ terminal part for on-site connection.

Vapor discharge of the motor driven pump.

Detailed view of diesel engine and collector with vertical axe.

System complete with an outside R 60 technical room, with installation of vertical pumps in flooded suction

system, with an underground tank. Preassembled group on a unique or modular base, depending on the model,

including a main electric driven vertical turbine pump, supplied separately, coupled with an electric driven

motor, and its power is calculated calculating the maximum pump consumption.

1

7

5

8

64

2

1 6

573 4 8

Pumps’ collector assembled on skid.

3

Pump room removable roof.

2


24 25

CABI/SM MODel

Pump connection collector.

Access room in R60 sandwich panels for the installation of control boards and various accessories.

Detailed view of the bottom section of the access room.

Access box supporting frame, made of steel sheet profiles.

System complete with an underground water storage tank and equipped with submerged pumps, a pump extraction room

and an aboveground entrance box.

1

5 64

12

6

3 5 4

Access room in convex steel sheet grid complete with fill valve.

3

Submerged pumps in horizontal installation type.

2

26 27


PUMP COMPARTMENTSThe pump compartments are designed and manufactured to contain any type of pump groups.

They are all complete with the necessary features to be compliant to UNI 11292 norm.

28 29

PUMP ROOMSCompartment for the installation of all available Righetto Serbatoi pump groups, complete with R60 type

sandwich panels, front door and side removable panels, if necessary.

Designed to guarantee freedom of movement according to UNI 11292/08 norm and also ensuring the operators’

safety, according to clause 5.2.2., enabling them to work on the electric control board protected by the external

environment. The technical compartment has a fire resistance degree R60 according to UNI EN 12845; the

prefabricated compartments include:

Supporting frame made of tubular steel, coated with fireproof paint.

Sandwich panels externally in aluminium and with internal mineral fiber thick 80 mm.

Door fire-safe type REI60 certified by the manufacturer.

-

-

-

1 2 3

30 31

Detailed view of the internal part of the control room, the operator is totally protected by the external environmental conditions, as per UNI 11292, clause 5.2.2.

Sliding door. Hinged door. Fixed panel.

1

Filling and suction connections optionally available inside the technical room for prevention of problems due to low temperatures.

3

Walkable tight mesh grid, non-slip type, aboveground, for the operator’s safety, according to UNI 11292, clause 5.3.

2

Our pump compartments are adaptable to any type of fire fighting pressurization groups:

Pump group in a suction lift installation with internal suction couplings.

Pump group in a suction lift installation with external suction couplings.

Pump group in a flooded suction installation with external suction couplings.

Pump groups with vertical axe with removable cover for coupling on site.

-

-

-

-

PRESSURIZATION GROUPSThe pressurization groups are UNI EN 12845 compliant, they are installed inside our technical rooms and can

be equipped with a variety of pumps, electric or endothermic engines. They are supplied pre-assembled on

supporting skids, complete with the hydraulic and electric components.

This is the main part of the system and has to guarantee the necessary capacity and pressure of water from

the water tank.

32 33

PRESSURIZATION GROUPS (UNI EN 12845) PRESSURIZATION GROUPS (UNI EN 12845)

VERTICAL TURBINE PUMPSThe pressurization groups are UNI EN 12845 compliant, they are installed inside our technical rooms and can be equipped with a variety of pumps, electric or endothermic engines. They are supplied pre-assembled on supporting skids, complete with the hydraulic and electric components.This is the main part of the system and has to guarantee the necessary capacity and pressure of water from the water tank.

Fire fighting system pressurization group with vertical axe, pre-assembled on a base, with submerged pump body, above ground control group as per EN 12845. The pump groups installed in the technical room are designed in compliance with UNI EN 12845 and are complete with all necessary elements in order to start automatically the system in the case when water supply is required.In the standard versions the pump groups consist of one or more electric driven pumps, or in alternative of a diesel pump (main) and a pilot compensating electric driven pump.

Standard features of the electric and motor pump:

1. Steel bi-flanged manifold.2. Shut-off flanged valves with lockable control lever.3. Pressure switch test circuit.4. Double pump start switch.5. Electric control board.6. Inspectionable check valve, flap type.7. Spacer coupling between engine and pump, easy to open, with protective case.8. Asynchronous three phase electric motor, closed type, ventilated externally.9. Recirculation circuit for pump cooling .10. Flow meter.11. Pump, maintenance possible without interfering with the engine and with the piping.12. Flow metering circuit coupling.13. Eccentric pipe reduction with accessories as per UNI EN 12845 clause 13.2.3.14. Fuel tank (6 hours operation capacity) with drip tray and level indicator (motor driven pump).15. Diesel engine with water/water heat exchanger (if power >/= 30 kW motor driven pump) and 2 start batteries (motor driven pump).

Motor driven pump Electric driven pump

Standard features of the electric and motor pump

1. Steel bi-flanged manifold.2. Shut-off flanged valves with lockable control lever.3. Pressure switch test circuit.4. Double pump start switch.5. Control electric board.6. Check valve flap type inspectionable.7. Vibration damped coupling.8. Recirculation circuit for pump cooling.9. Flow meter.10. Bell housing with elastic joint.11. Spacer coupling between engine and pump, easy to open, with protective case.12. Diesel engine with water/water heat exchanger (if power >/= 30 kW motor driven pump) and 2 start batteries (motor driven pump).13. Fuel tank (6 hours operation) with drip tray and level indicator (motor driven pump).14. Flow metering circuit coupling.15. Electric motor asynchronous three phase, closed type, ventilated externally.

16. Electric driven pump with vertical axe and submerged body.

Electric switchboard for electric driven pump and motor driven pump

- IP 55 steel box painted epoxy coating.- General switch with lockable door-block when “ON”.- Starting contactor or star/delta type- Protection fuses with high breaking resistance.- General terminal block for connection of alarm signals to remote board in control room.- Manual or automatic selector with key.- Start/stop button.- Electric driven pump management relay with display and control lights according to UNI EN 12845.- Battery charger with charge level control and failure alarm.- Frangible emergency button for motor driven pump start.

Electric switchboard for electric driven pump and motor driven pump

- IP 55 Steel box painted epoxy coating.- General switch with lockable door-block when “ON”.- Starting contactor or star/delta type.- Protection fuses with high resistance.- General terminal block for connection of signals to remote board in control room.- Manual or automatic selector with key.- Start/stop button.- Electric driven pump management relay with display and control lights according to UNI EN 12845.- Battery charger with charge level control and failure signalization.- Frangible emergency button for motor driven pump start.

34 35

Electric driven pumpMotor driven pump

ELECTRIC PILOT PUMPElectric driven pump with three phase asynchronous centrifugal motor.

Remote alarm signalization board

This mandatory device, in compliance with UNI EN 12845, displays all alarms and failures of the fire fighting systems and must be installed in a permanently controlled room as per UNI EN 12845.

- Feeding 230 V / 50 Hz. - A backup battery and battery charger. - A red control light for fire alarm. - A yellow control light for failure. - An acoustic and visual alarm signalization with alarm shut up.

OPTIONAL: GSM module for remote alarm control via phone line.

Standard features for the pilot pump

1. Shut off ball-valve in the filling tube.2. Pilot pump complete with electric driven motor.3. Shut off ball-valve in the suction tube.4. Junction element with air vent tap.5. Check valve “Europe” type.6. Pump start switch.7. Pressure control device.8. Pressure vessel.

Pilot pump electric board

IP 55 steel sheet box, painted epoxy.General switch with lockable door block when “on”.Temperature relay for engine protection.Manual or automatic selector.Control light for temperature block, operate, network, alarm.General terminal block for alarm send to the remote board.

------

36 37

TYPE OF APPLICATIONS:

SUCTION LIFT SYSTEM

FLOODED SUCTION SYSTEM

VERTICAL

FOAM PLANTSBesides the traditional water fire fighting systems, in some case the use of an additional foam mixed with water

is necessary. These systems are installed along with the usual pressurization groups, and they can be outdoor

or indoor type.

38 39

FOAM PLANTS (a norma UNI EN 13565 – 1 2008 e NFPA/UNI EN 13565 – 2 2009)

Foam generator with high expansion rate. High expansion foam extinguishing system installed inside a technical room of a fire fighting system, including a complete tank and deluge valves for the separate circuits.

The pre-mixer includes a foaming storage tank and a line-blender installed on the water fire safety line, which feeds the system through the pressurization group. The necessary quantity of foam is diluted with water in the blender, then pushed along the pipes and emulsified with air by the nozzles or generators with the requested expansion ratio.

Foam is an effective fire extinguishing agent, made of water, air and foaming agent. It is particularly effective

against class A fires (plastic and rubber etc.) and class B ones (flammable liquids and fuel, paints etc.). Foam

puts out fires thanks to:

- Cooling: water foam, while evaporating, lowers the fire temperature.

- Suffocation: the dense layer of foam prevent oxygen from fanning the flames.

- Insulation: preliminary spraying of foam on objects prevents expansion of the fire.

- “Cover” effect: the layer of foam prevents the circulation of fuel vapors in the air.

Three types of fire safety systems are available, depending on the characteristics of the area to be protected:

1. Low expansion type foam expansion ratio 1:4 1:20 (surface fires). This type of foam scrolls and sticks

easily to surfaces, floats on liquids.

2. Medium expansion type foam expansion rate 1:20 1:200 (surface fires). A fluid and light foam,

compact and able to absorb the heat.

3. High expansion foam expansion rate 1:200 1:1000 (volume fires). It is particularly dry and light and

able to fill up completely internal spaces and compartments.

Our “Righetto Foam System” features:

Water storage tank.

Pressurization group.

Pre-mixer (tank and blender).

Control valve/s and alarm valve/s.

Nozzles/generators for high expansion foam.

The foaming agent is stocked inside a tank with dimensions to be determined in accordance with the volume

of the area to be protected. Inside the tank, the foam is contained inside a membrane in woven rubber. The

membrane prevents any contact between foam, water and the tank surface, thus avoiding dilution of the foaming

element and corrosion of the surface.

-

-

-

-

-

40 41

TRANSPORT Other systems

Among other types of service, Righetto Serbatoi are able to arrange delivery to site of our fire fighting systems, including special transports.

Installation

A use and maintenance manual is always included in the shipment among all other documents, in compliance

with the Machine Directive 2006/42/CE and DPR 459/96 dated 24/07/96, including all necessary instruction for

downloading, installation underground of the tanks, besides the schedule of maintenance.

Maintenance

Our service points are able to assist our customers with “scheduled maintenance” programs, in full compliance

with UNI EN 12845, clause 20.

Righetto Serbatoi offers a wide range of special liquid storage systems such as large vertical tanks (assembled on site), parallelepiped tanks, customized tanks, and are able to assist customers for specific installation issues.

Large vertical tanks with external ladder, internal case, flanged couplings UNI type. This kind of project is designed by our qualified technicians.

Pump room for vertical tank. R60 box with suction lift installation type.

42 43

via dei Laghi, 67 - 36077 Altavilla - (VI) - Italy

Ph. +39.0444.348 632 | Fax +39.0444.348 631

[email protected]

www.righettoserbatoi.com

vers

. 1.1

6

via dei Laghi, 67 - 36077 Altavilla - (VI) - Italy

Ph. +39.0444.348 632 | Fax +39.0444.348 631

[email protected]

www.righettoserbatoi.com

Documents

FIRE FIGHTING SYSTEMS CATALOGUE - Righetto Serbatoi · FIRE FIGHTING SYSTEMS CATALOGUE. ... In compliance with UNI EN 12845/15, UNI 11292, UNI 10779 Most of the fire fighting systems