Fire Resistant Doorsets

Fire Resistant Doorsets

Metal Doors series

Fire Doors :Available with a variety of configuration andvision panel options. A maximum fireresistance of 4 hours can be achieved.

Insulated Doors :Full range of insulated doors 30 & 60 min upto 2 hours fire rated. Designed to suit thepower sub-stations, cold stores, heattransferred applications.

Clean room Doors :Flush door sets have no visible constructionlines and therefore allow a totally clean surfacewhich reduces particle contamination for cleanroom environments.

Personnel Doors :A complete range of single or double doorsets designed to satisfy the variedrequirements of general purpose internal andexternal applications.

Acoustic Doors :A complete range of single and double doorsets to suit performance requirements up toRW53dB and 120min fire integrity.

page 1

FD & FI RangesFire Doorsets

warringtonfireglobal safety

Strong, Versatile, Distinctive…

For more than a century has been at the forefront of the design,

manufacture and supply of architectural hardware and opening

solutions.

As the world’s largest manufacturer and provider of security and safety

products and services, the company has achieved unrivalled success.

Fire… The irreparable damage it causes costs GCC businesses millions of dirhams every year. It also costs lives.

The devastation caused by fire should never be underestimated. Similarly, the importance of adequate fire protection cannot be emphasised enough.

By choosing FD & FI Range Fire Resistant Steel Doorsets you can be assured of protection for up to 3 hours.

The FD & FI Ranges have been tested and certified by Warrington Fire Research Centre and the Underwriters Laboratories.

For further detailed technical information, please contact our sales team.

UL®

The stairways and corridors within a building can act like a chimney, allowing fire to spread quickly from one level to another. By isolating the fire and preventing it from reaching these areas, fire doors not only buy occupants valuable time but also protect people and property from fire damage and the harmful effects of smoke.

A division of Technologies C&B has achieved an enviable reputation in the design, manufacture and supply of high performance steel fire doors and frames. Our fire doors are fully tested and approved by leading authorities throughout the world.

FD & FI RangeFire Doorsets

page 2

Steel Doorset Characteristics

• Strong durable and impact resistant

• Unaffected by moisture; will not warp, swell or rot

• Excellent surface finish, smooth and durable

• Prepared & reinforced to receive a wide range ofhardware

• Inherent hygienic properties

• Reduced maintenance and lower cost of ownership

• Enhanced security and acoustic characteristics

• Environmentally friendly - 100% recyclable

• Long life performance and improved life cyclecosts

Classifications

BS 476 Part 22: 1987 (Fire integrity) BS 476 Part 22: 1987 Clause 6 (Full fire insulation) BS EN 1634-1: 2000 (New European standard) BS 5588-4: 1988 (Smoke passage) Underwriters Laboratories Inc.

BS EN ISO 9001: 2000 (Quality Management System)

Tested to 1 million cycles in accordance with EN 1191

Options

Single and double doorsets

Single and double swing

Side and overpanels

Banks of doorsets

Vision panels

Fully glazed option

Fire block louvres

Full range of premium hardware sets and accessories

Finishes

Comprehensive range of RAL polyester powder top coat finishes or primer coated. Brushed, polished or patterned stainless steel to order.

Specification information

CAD drawings - DXF or DWG versions

NBS Specification (Document L20-Doors/ Shutters/Hatches)

Standard Frame Profile Options

Non-standard profiles also available to client specification

Profile A2

Profile B3 Profile B5

100m

m14

0mm

240m

m

Note: When specifying, consideration should be given to sound transmission through surrounding building elements. RwdB: Weighted sound reduction index under laboratory conditions.

Fire Door Features

Proprietary fire rated core materials

1.2mm thickZinc coated mild steel or stainless steel door skins

High quality hardware

Stainless steel ball bearing hinges

True verticallock seam joints

Hinge detail(open position)

Frame assembly options- Knock-down butt joint- Push-up head- Butt mitre bolted- Butt mitre welded

Frame infill to fire insulated, acoustic or thermally rated specification

1.5mm thick Zinc coated mild steel or stainless steel frame

46 mm leaf thickness

Proprietary frame smoke seals

Threshold option

Euro style lockcase with 72mm lock centres

Top and bottom rails spot-welded in position

FD - Fire Door Range

Door Ref:Fire Integrity Rating Sound Reduction

(Optional)

FD1001

FD1002

FD1003

FD1004

1 hr

2 hr

3 hr

4 hr

30RwdB

30RwdB

BS EN UL

1 hr

2 hr

0.75 hr

1.5 hr

FD - Fire Insulated Door Range

Door Ref:Fire Integrity Sound Reduction

(Optional)

FI1001

FI1002

FI1003

FI1004

1 hr

1 hr

2 hr

2 hr

40RwdB

40RwdB

40RwdB

40RwdB

BS BS

0.5 hr

1 hr

0.5 hr

1 hr

Fire Insulation

3 hr

Fire Doors

Fire doors are designed to protect property and

life in the event of a fire. For this, the door must

serve as a fire and smoke barrier. Studies have

shown that more people have lost lives due to

smoke asphyxiation than fire.

Fire Doors must serve four main functions

n serve as a regular door at all times

n provide ready egress from a fire area during a

fire

n inhibit spreading of fire

n protect life and property by reducing smoke

hazards.

When an opening requires strength, durability, or

maximum fire resistance, steel doors and frames

provide the qualities to meet these needs. Due to

growing access control needs, fire doors have

today evolved to accommodate the growing

electrified functions a door must support.

Designed to meet the life-safety requirements in

various types of buildings and structures, Shakti

fire doors help compartmentalise and contain the

spread of fire. These doors complement existing

passive fire-fighting systems. These doors also

meet all the stipulated international, national and

regional fire safety standards.

These doors are available with honeycomb core

as standard infill material with other optional

cores. These doors are rated for 45, 60,

90,100,120, 180 and 240 minutes’ fire

withstanding ability. All fire doors are factory

finished with polyester powder coated finish paint.

APPLICATIONS

These doors can be used in high-rise buildings,

metro railway stations, telecom centers, power

plants, cellular network stations, garment

processing units, shopping malls, industrial plants,

multiplexes, hotels, auditoriums, software parks,

restaurants, etc. The doors and frames are

designed to perform and in the most demanding

environment.

FEATURES

n Available in galvanised or stainless steel

n UL labeled doors for 45, 60, 90, 120, 180 minutes

n Clear vision lite for up to 120 minutes’ fire rating

n No welding joints and sharp edges, interlocking at

the stiles

n Factory prepped to receive all types of hardware

n High aesthetics and robust structure

n Fully flush constructions

n Easy to install on a flush wall opening & dry wall

partitions

n Factory finished for polyester powdercoated finishes.

OPTIONAL FEATURES

n Wood Grain can be provided as an optional finish.

STANDARDS & CERTIFICATIONS

n Tested to UL 10B & UL10C and confirming to

NFPA 80

n Fire doors are tested as per BS 476 Part 22 in

Warrington

n Fire doors are tested to BS 476 Part 22

WARRANTIES

All our products carry a warranty of 1 year against

manufacturing defects.

Galvanised Steel

MATERIAL - OPTIONS

Stainless Steel

DOOR FRAMES

SHEET THICKNESS

16

1.5

18

1.2

Gauge

Millimeters

14

2.0

Note: For actual frame opening size please see the door data sheet for both labelled and BS doors.

Inches

Millimeters

36’ 10 /4 ”

2100

7’ 2 ”

2200

5/8 7’ 10½”

2400

9’ 10

3000

1/8 ”

STANDARD HEIGHTS (WALL OPENINGS)

8’ 10 ”

2700

1/4

*Other sizes are available. Max depth for Labelled doors can be 350 mm.

TECHNICAL DATA FOR STANDARD FRAMES (D x H)

Size of double rebate frame

Size of single rebate frame

Frame assembly

(143 x 57 mm)*

(100 x 57 mm) (100 x 70 mm)

Mitered Butted Welded

Fire Doors

FEATURES

n Available in galvanised and stainless steel

n Frames available in single and double rebate

n All frames are prepared for receiving hardware

n Frames can also be designed for flush fixing

n Primed and finish painted.

OPTIONAL n Frames with Architave

n Frames with inbuilt seals.

FRAMES

Available in mitered joint and butted assembly, our

frames are supplied in knock down form for easy

assembly at site. Welded frames are supplied on

special request.

STANDARD DESIGN

Single rebate frame Double framerebate

[Max. depth for

Labeled Door Frame

is 350 mm or 14”.]

BS UL UL / BS / IS

HARDWARE PREPARATION

Hinge Jamb

4 mm thick steel hinge reinforcement door

and frame for receiving the hinge.

Strike Jamb

3 mm thick steel lock strike reinforcement with

tapped holes welded to the frames.

Mortar Guard

1.2 mm thick steel plaster guard or mortar

guard is provided at the back of all hardware

cutouts in the frame.

Double rebate - T - Anchor

Double rebate - Back Plate

FRAME ASSEMBLY DETAILS

Welded Joint (Double rebate)Mitered Joint (Double )rebate Bolted Joint (Double rebate)

ANCHORING AND FIXING DETAILS (OPTIONS)

(Mitered and bolted joint frames are supplied in knock down form)

Frames can be designed for fixing on typically plastered opening, masonry opening or dry wall

partitions. We offers a wide range of unrivalled options in aesthetics and finishing.

Tee-Anchoring: First fix provides maximum engagement into the constructed wall, with slip-on anchors

made out of galvanised steel.

Expansion Anchors: Used in masonry openings or finished plastered openings. The frames are bolted to

the clear opening with 8 mm expansion anchors. Screws are rested on the backplate.

Bolted Anchors: Frames fixed on 'C' Channel are bolted directly on to the back plate.

Frames installed on ‘C’ chennel

Frames installed with wood stud

Frames installed with steel stud

DRY WALL FIXING

Fire Doors

Galvanised Steel

MATERIAL - OPTIONS

Stainless Steel

DOOR LEAF

SHEET THICKNESS

22

0.8

Gauge

Millimeters

16

1.5

18

1.2

Note: The sizes mentioned above are for the door leaf and does not include the frame.

TECHNICAL DATA FOR DOOR LEAF

Non-temperature rise doors

Temperature rise doors

Door thickness

Min. door opening width

Max. door opening width

Max. door opening height

Max. door opening width

Max. door opening height

Single Leaf

346 mm (1 /4 ”)

357 mm (1’ 2”)

1219 mm (4’ 0”)

3048 mm (10’ 0”)

1219 mm (4’ 0”)

2743 mm (9’ 0”)

Pair of Leaf

-

714 mm (2’ 4”)

2438 mm (8’ 0”)

3048 mm (10’ 0”)

-

-

Fire Doors

FEATURES

n Interlocking construction at stiles

n Fully flush and flat surface

n Optional insulated infill material

n Factory prepped to take any hardware

n Rounded edges for safety in use

n High aesthetics and robust structure

n Maintenance-free doors.

Louvers

Labeled doors can be provided with optional

louvers with fusible link for a maximum size of

24” x 24” in 1½ hrs. rated doors. Not

applicable on BS doors.

DOOR LEAF

Door Leaf Design Feature

Fire Doors are designed to be fully flush without

any joints on the surface of the door. Steel

reinforcements are provided for structural stability

and integrity. The doors are available in both

galvanised steel and stainless steel. Doors are

factory finished in all aspects for receiving

hardware and etched primed to take final coat of

paint.

Stainless steel doors are available in No. 2B or

No. 4 finishes.

Options:

Fully flush

This design does not have any provision for fixing

of the options like glass or louvers. It is fully flush

on both sides.

With vision lite

Door leaf can be provided with vision lite for

visibility.

n The sizes mentioned above are for 1½ hrs. and

2 hrs. labeled doors except C type

n Labeled doors with 3/4 hr. rating can have glass

of 1296 sq. inches / vision lite

n Max width / height is 54” for vision lite of size

1296 sq. inches

n Max width for 100 sq. inches is 12” and max

height in 33”.

Vision Lite sizes in (mm) - W x H

V

N

C

R

380

250 x 250

125 x 500

200 x 300

Fire Doors

INFILL

Honeycomb Kraft paper with its unique

properties enhances the structural integrity of the

doors with minimal additional weight to the door. The

final finish on the door is predominantly dependent

on the quality of the honeycomb kraft and the glue

which is used to get the flat surface. This infill

material invariably has high crushing strength

leading to impact resistance. The quality and

consistent flat surface achieved because of the infill

material is exceptional to the material and design of

the doors.

Steel Stiffened Doors: Used for exterior

applications, these doors are known for their rigidity

and are available in varying strength and quality.

While the thickness of the stiffeners can vary, we

offer stiffeners of 20 gauge galvanised steel.

Spacing between stiffeners may vary from 4” to 6”.

They are welded to each other at the top and bottom

and to the inside door skin. The cavities are filled

with special core. For temperature rise doors, all

cavities are filled with mineral rock wool.

DOOR ELEVATIONS