2
The Firenze series channels the traditional beauty and sophistication of the city of Florence in Tuscany. With its warm palette and rich shading, this full-body porcelain stoneware with inkjet application is an option that will add charm to any space. MADE IN ITALY (19) FIRENZE

FIRENZE (19) - Tileshop · Firenze is suitable for residential and moderate commercial use. The Coefficient of Friction is a general guide only. Testing may vary with different production

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: FIRENZE (19) - Tileshop · Firenze is suitable for residential and moderate commercial use. The Coefficient of Friction is a general guide only. Testing may vary with different production

The Firenze series channels the traditional beauty and sophistication of the city of Florence in Tuscany. With its warm palette and rich shading, this full-body porcelain stoneware with inkjet application is an option that will add charm to any space.

MADE IN ITALY

(19)FIRENZE

Page 2: FIRENZE (19) - Tileshop · Firenze is suitable for residential and moderate commercial use. The Coefficient of Friction is a general guide only. Testing may vary with different production

TSFPFE/150423

Size (Non-Rectified)*8.5” Hex FPFE--/9HX

Installation InformationThis is a non-rectified tile. A minimum 1/8” grout joint is recommended. As with all inkjet lines, there are many graphics that are mixed and packed randomly. It is important to pull from multiple boxes during installation, rotate pieces and note the placement of the different images in order to get the proper final blend.

UsageFirenze is suitable for residential and moderate commercial use.

The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.

*

10545-3

10545-12

10545-14

DIN51130

Water Absorption

Frost Resistance

Stain Resistance

Slip Resistance

<0.5%

Resistant

Class 5

R 10

DCOFDynamic Coefficient of Friction

* Wet ≥ 0.42

Cuoio (Terracotta) FPFECO

Dorato (Beige) FPFEDO

Tabacco (Brown) FPFETO

Physical Characteristics

PRODUCT INFORMATION

Colors are intended as a guide only and may vary from actual tile. Sizes listed are nominal. Please check samples before making final selection and to get actual dimensions for layout.

*Dimensions are approximate.

Green BuildingCouncil of Italy

www.tile-shop.comTILESHOP