First Season Cockpit Back Wall Control Pedestal Lounge Computer Transporter Door Controls Red Labels Fifth Season Cockpit Instructions Cockpit decals are placed on this sheet in the order and configuration theyʼll be used on their interior kits from port to starboard. The lounge computer decals are also arranged how they will fit on the kit. Door controls and red labels are scattered around the sets. There are plenty of reference pictures out there to show you where. Because theyʼre small Iʼve included way more than you probably need. My suggestion for using these is to get some clear styrene or other easily cut clear plastic and frost it on one side. cut it to the size of the decals and then place the decals on the unfrosted side. Then insert the pieces into the cutouts on the kit parts. You can also just print these on plain paper or backlight film and glue them behind the kitʼs cutouts. Be sure to print at 100% scale. Measure the ruler at the bottom of these instructions to make sure your print is the right size before cutting. These decals are my own work based on careful research of the Runabout sets. They are not photos, but hand-drawn recreations. Please do not reproduce or distribute them for a profit. Mark Farinas Spaceway Parts 20mm D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5 D5

First Season Cockpit Fifth Season Cockpit Instructions ...Control Pedestal Back Wall Lounge Computer Transporter Door Controls Red Labels Fifth Season Cockpit Instructions Cockpit

Download PDF Report

Upload
others
View
24
Download
0

Embed Size (px)

Citation preview

First Season Cockpit

Back WallControl Pedestal

Lounge Computer

Transporter

Door Controls Red Labels

Fifth Season Cockpit

Instructions

Cockpit decals are placed on this sheet in the order and configuration theyʼll be used on their interior kits from port tostarboard. The lounge computer decals are also arranged how they will fit on the kit. Door controls and red labelsare scattered around the sets. There are plenty of reference pictures out there to show you where. Because theyʼresmall Iʼve included way more than you probably need.

My suggestion for using these is to get some clear styrene or other easily cut clear plastic and frost it on one side.cut it to the size of the decals and then place the decals on the unfrosted side. Then insert the pieces into the cutoutson the kit parts.

You can also just print these on plain paper or backlight film and glue them behind the kitʼs cutouts. Be sure to print at100% scale. Measure the ruler at the bottom of these instructions to make sure your print is the right size before cutting.

These decals are my own work based on careful research of the Runabout sets. They are not photos, but hand-drawnrecreations. Please do not reproduce or distribute them for a profit.

Mark FarinasSpaceway Parts

20mm