Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
11
fischer Substrate Report Summary 2012 / 01
For further information on the different substrates and fixings please contact the Technical Department - see back cover.
Hanson
THERMALITE
Acheson GLOVERTHE ACHESON &GLOVER GROUP
COBIAX DECK
2
Sub
stra
te R
epor
t
22
Sub
stra
te R
epor
t
2
The information in this catalogue is intended for general guidance only and is given without engagement. Additional information and advice on specific applications is available from our Technical Support Team. For this however, we require a precise description of your particular application.All the data in this price list concerning work with our fixings must be adapted to suit local conditions and the type of materials in use.If no detailed performance specifications are given for certain articles and types, please contact out Technical Service Department for advice.
Technical disclaimer / Decisive factors
Due to the complexity of building materials, tools, fixing elements and installation techniques a comprehensive recommendation depends on full and detailed understanding of specific site conditions.
This document is a factual record of results obtained under specific conditions and does not constitute an endorsement of the suitability of the the product tested for any specific application. This responsibility remains with the customer.The test results shall be used as a guide for assessment or anchor suitability. Even when our advise is given in good faith it cannot be binding for this reason and we cannot accept any liability for any anchor failure due to the wrong design, misuse or wrong installation.
For full Test Reports please contact the fischer technical Department:
Phone: 01491 827 920E-mail: [email protected]
fischer Fixings (UK) Ltd.Whitely Road, Wallingford, Oxon, OX10 9AT.
We cannot be responsible for any errors, and we reserve the right to make technical and range modifications without notice.No liability is accepted for printing errors and omissions.
Technical TrainingWe also offer training seminars suited to your individual needs and requirements. Please call the technical department on the number below to find out more.
Call: 01491 8
27920
3
Sub
stra
te R
epor
t
Index
Contents
Medium density blocks1. Forticrete Hi-Light - 7N/mm2
2. Master Block Multicell - 7N/mm2 3. Tarmac Hemelite 100mm Solid - 7.3N/mm2
4. Tarmac Topcrete 100mm Solid - 7.3N/mm2
5. Tarmac Topcrete Multi-core Block - 7N/mm2
6. Tarmac Topcrete 140mm Cellular - 7.3N/mm2
Lightweight blocks7. Tarmac Hemelite 100mm Solid - 3.6/mm2
8. Tarmac Hemelite 100mm Cellular 3.6N/mm2
Aircrete blocks9. Tarmac Toplite 100mm GTI - 2.8N/mm2
10. Tarmac Durox Supabloc - 3.5N/mm2 11. Tarmac Toplite 100mm Standard - 3.6N/mm2
12. Tarmac Toplite 140mm ‘7’ - 7.3N/mm2
13. Thermalite Turbo - 2.9N/mm2
14. Thermalite Shield – 3.6N/mm2
15. Thermalite Partywall - 4.0N/mm2
16. Thermalite Hi Strength 7 - 7.3N/mm2
Plasterboard/Wallboard17. British Gypsum 12.5mm Glasroc MultiBoard18. British Gypsum 12.5mm Gyproc WallBoard19. British Gypsum 15mm Gyproc SoundBloc20. British Gypsum 15mm Gyproc DuraLine21. British Gypsum 15mm Gyproc FireLine22. Knauf Drywall Standard 15mm plasterboard23. Knauf Drywall Dense-shield 15mm plasterboard24. Knauf Drywall Sound-shield 15mm plasterboard25. Knauf Drywall Fire-shield 15mm plasterboard26. Knauf Drywall Moisture-shield 15mm plasterboard27. Lafarge Megadecco 15mm28. British Gypsum Double layer 15mm Glasroc MultiBoard29. British Gypsum Double layer of 15mm Gyproc SoundBlocClay blocks30. Womersleys Clay Bio Bricks31. NBT Ziegel Blocks32. Wienerberger Porotherm 190 Perforated fired clay blocks33. Wienerberger Porotherm 365 Perforated fired clay blocksHollow floor slabs34. Bison Tensyland slab 55N/mm2 – wall thickness 25mm35. Acheson Glover (Finlay) Hollow Core Units36. Topfloor Hollowcore floor slab 150mm thick37. Topfloor Lound M unit floor slab38. Topfloor 225 DBT Unit39. Topfloor 150 Spiroll Unit40. Topfloor 150 EST Unit41. Topfloor 225 EST Unit42. Topfloor 320 IHE Unit43. Topfloor 150 DBW Unit44. Topfloor 150 DBT Unit45. Hanson Hollowcore unit 200 mm deepThin pre-cast voided slabs46. BubbleDeck Precast Structural Flooring System47. Cobiax 50mm Precast Slabs and Omnia Slabs48. Cobiax 75mm Precast Slabs and Omnia Slabs
4
Sub
stra
te R
epor
t
44
Sub
stra
te R
epor
t
4
Medium Density Blocks
1. Forticrete Hi-Light - 7N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
FIS V 360 S 10.53kN 2.6kN 110 mm
KD8 8.75kN 2.1kN 110 mm
FHY 7.2kN 1.8kN 110 mm
SXS 2.04kN 0.3kN 110 mm
2. Master Block Multicell - 7N/mm2
Image Product tested Average ultimate load Safe working load
FUR 10x100 1.42kN 0.20kN
SX10 0.6kN 0.09kN
FISH 360 S & FISH N 7.08kN 1.77kN
3. Tarmac Hemelite 100mm Solid – 7.3/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 5.60kN 0.80kN 80mm
UX 8 2.30kN 0.33kN 80mm
M8 Unit 5.16kN 0.73kN 220mm
FUR 10x80 5.11kN 0.73kN 110mm
SXS 10x80 6.16kN 0.90kN 110mm
FFS 5.35kN 1.33kN 110mm
FSA 10 6.15kN 1.53kN 220mm
FIS V 360 S + M8 8.05kN 2.01kN 220mm
Medium Density Blocks
5
Sub
stra
te R
epor
t
4. Tarmac Topcrete 100mm Solid - 7.3N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 1.58kN 0.23kN 80mm
UX 8 0.73kN 0.11kN 80mm
FUR 10x80 6.75kN 0.96kN 110mm
SXS 10x80 8.58kN 1.23kN 110mm
FSA 10 6.16kN 1.54kN 220mm
FIS V 360 S + M8 7.32kN 1.83kN 220mm
5. Tarmac Topcrete Multi-core Block - 7N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
FIS V 360 S 11.9KN 2.90KN 220 mm
FHY M10 1.4KN 0.35KN 70 mm
M UNIT M10 2.7KN 0.38KN 70 mm
SX Plug 2.2KN 0.31KN 70 mm
FU 10 3.3KN 0.47KN 70 mm
6. Tarmac Topcrete 140mm Cellular - 7.3N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
FHY M8 3.83kN 0.96kN 220mm
M8 Unit 4.00kN 1.00kN 220mm
FIS V 360 S M12 6.88kN 1.72kN 220mm
Medium Density Blocks
Medium Density Blocks
6
Sub
stra
te R
epor
t
66
Sub
stra
te R
epor
t
6
Lightweight Blocks
7. Tarmac Hemelite 100mm Solid – 3.6N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 1.40kN 0.20kN 80mm
UX 8 1.00kN 0.14kN 80mm
FUR 10x80 5.70kN 0.81kN 110mm
SXS 10x80 7.75kN 1.11kN 110mm
FSA 10 4.33kN 1.08kN 220mm
FIS V 360 S + M8 7.33kN 1.83kN 220mm
8. Tarmac Hemelite 100mm Cellular - 3.6N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
UX 8 0.74kN 0.10kN 80mm
M8 Unit 3.96kN 0.56kN 220mm
FFS 2.71kN 0.69kN 110mm
FIS V 360 S + M8 7.20kN 1.80kN 220mm
Lightweight Blocks
7
Sub
stra
te R
epor
t
7
Sub
stra
te R
epor
t
Aircrete Blocks
9. Tarmac Toplite 100mm GTI - 2.8N/mm2
Image Product tested Average ultimate load Safe working load Characteristic Axial spacing
SX 8 0.38kN 0.06kN 80mm
UX 8 0.53kN 0.08kN 80mm
FUR 10x80 1.53kN 0.22kN 110mm
GB 10 1.62kN 0.23kN 220mm
FIS V + PBB + M8 6.38kN 1.59kN 220mm
FNH 6/60 0.23kN 0.06kN 210mm
FMD 6x32 1.20kN 0.30kN 120mm
FTP M6 1.40kN 0.35kN 150mm
DHM 0.69kN 0.17kN 150mm
Aircrete Blocks
10. Tarmac Durox Supabloc - 3.5N/mm2
Image Product tested Average ultimate load Safe working load Characteristic Axial spacing
FIS V + PBB + M10
4.63kN 1.15kN 150 mm
FIS V + PBB + M12
5.36kN 1.34kN 150 mm
FUR 8X80 T 1.91kN 0.27kN 110 mm
FUR 10X80 T 2.41kN 0.34kN 110 mm
SX8 1.46kN 0.20kN 110 mm
SX10 2.11kN 0.30kN 110 mm
8
Sub
stra
te R
epor
t
88
Sub
stra
te R
epor
t
8
Aircrete Blocks
11. Tarmac Toplite 100mm Standard - 3.6N/mm2
Image Product tested Average ultimate load Safe working load Characteristic Axial spacing
SX 8 1.57kN 0.22kN 80mm
UX 8 0.53kN 0.08kN 80mm
FUR 10x80 2.15kN 0.31kN 110mm
GB 10 2.17kN 0.31kN 220mm
FTP M8 0.88kN 0.22kN 220mm
FIS V + PBB + M8 7.38kN 1.84kN 220mm
FNH 6/60 0.51kN 0.13kN 210mm
FMD 6x32 2.27kN 0.56kN 120mm
FTP M6 2.18kN 0.54kN 150mm
DHM 0.76kN 0.19kN 150mm
12. Tarmac Toplite 140mm ‘7’ - 7.3N/mm2 Image Product tested Average ultimate load Safe working load Characteristic
Axial spacing
SX 8 1.98kN 0.28kN 80mm
UX 8 1.00kN 0.15kN 80mm
FUR 10x80 2.99kN 0.43kN 110mm
GB 10 2.52kN 0.36kN 220mm
FTP M8 0.10kN 0.03kN 220mm
FIS V + PBB + M8 7.38kN 1.84kN 220mm
FNH 6/60 0.85kN 0.21kN 210mm
FMD 6x32 4.45kN 1.11kN 120mm
Aircrete Blocks
9
Sub
stra
te R
epor
t
9
Sub
stra
te R
epor
t
Aircrete Blocks
THERMALITE 13. Thermalite Turbo - 2.9N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 0.73kN 0.10kN 120 mm
SX 10 2.08kN 0.30kN 120 mm
S-H-R 1.72kN 0.24kN 210 mm
FUR 10 2.23kN 0.32kN 210 mm
FUR 8 1.87kN 0.27kN 210 mm
FIS V + PBB + M10 4.60kN 1.15kN 200 mm
FIS V + PBB + M12 5.30kN 1.32kN 250 mm
14. Thermalite Shield – 3.6N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 1.13kN 0.16kN 150 mm
SX 10 1.78kN 0.25kN 150 mm
S-H-R 1.80kN 0.26kN 210 mm
FUR 10 2.35kN 0.33kN 210 mm
FUR 8 2.18kN 0.31kN 210 mm
FIS V + PBB + M10 3.90kN 0.97kN 200 mm
FIS V + PBB + M12 4.46kN 1.12kN 250 mm
Aircrete Blocks
THERMALITE
10
Sub
stra
te R
epor
t
10
15. Thermalite Partywall - 4.0N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 1.18kN 0.17kN 120 mm
SX 10 2.50kN 0.36kN 150 mm
FUR 10 3.10kN 0.44kN 210 mm
FUR 8 2.25kN 0.32kN 210 mm
FIS V + PBB + M10 3.92kN 0.98kN 200 mm
FIS V + PBB + M12 5.36kN 1.34kN 250 mm
Aircrete Blocks
16. Thermalite Hi-Strength 7 - 7.3N/mm2
Image Product tested Average ultimate load
Safe working load Characteristic Axial spacing
SX 8 2.68kN 0.38kN 120 mm
SX 10 3.73kN 0.53kN 150 mm
FUR 10 3.35kN 0.48kN 210 mm
FUR 8 2.08kN 0.30kN 210 mm
FIS V + PBB + M10 7.13kN 1.78kN 200 mm
FIS V + PBB + M12 8.13kN 2.03kN 250 mm
Aircrete Blocks
THERMALITE
THERMALITE
11
Sub
stra
te R
epor
t
Plasterboard / Wallboard
17. British Gypsum 12.5mm Glasroc MultiBoardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
PD 10 0.89kN 0.12kN 120 mm
HM5x52 0.9kN 0.22kN 150 mm
UX8x50 R 1.11kN 0.16kN 210 mm
KD6 Gravity toggle 1.3kN 0.33kN 210 mm
18. British Gypsum 12.5mm Gyproc WallBoardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
PD 10 0.47kN 0.07kN 120 mm
HM5x52 0.57kN 0.14kN 150 mm
19. British Gypsum 15mm Gyproc SoundBlocImage Product tested Average ultimate load Safe working load
PD 10 0.75kN 0.10kN mm
HM5x52 0.73kN 0.18kN mm
HM8x55 0.73kN 0.18kN mm
UX8x50 R 0.82kN 0.12kN mm
KD6 Gravity toggle 1.0kN 0.25kN mm
20. British Gypsum 15mm Gyproc DuraLineImage Product tested Average ultimate load Safe working load
PD 10 0.8kN 0.11kN mm
HM5x52 0.86kN 0.21kN mm
HM8x55 0.9kN 0.23kN mm
UX8x50 R 0.91kN 0.13kN mm
KD6 Gravity toggle 1.17kN 0.29kN mm
Plasterboard / Wall board
12
Sub
stra
te R
epor
t
1212
Sub
stra
te R
epor
t
12
21. British Gypsum 15mm Gyproc FireLineImage Product tested Average ultimate load Safe working load
PD 10 0.67kN 0.09kN
HM5x52 1.07kN 0.27kN
UX8x50 R 0.78kN 0.11kN
KD6 Gravity toggle 1.73kN 0.43kN
Plasterboard / Wallboard
23. Knauf Drywall Dense-shield 15mm plasterboardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
HM 8x55 SS 1.63kN 0.40kN 150mm
PD10 0.40kN 0.10kN 150mm
KD8 1.52kN 0.38kN 150mm
FU10x60 1.34kN 0.33kN 150mm
GK 0.70kN 0.17kN 150mm
22. Knauf Drywall Standard 15mm plasterboardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
HM 8x55 SS 1.18kN 0.30kN 150mm
PD10 0.50kN 0.12kN 150mm
KD8 1.15kN 0.25kN 150mm
FU10x60 0.70kN 0.17kN 150mm
GK 0.70kN 0.17kN 150mm
Plasterboard / Wall board
13
Sub
stra
te R
epor
t
13
Sub
stra
te R
epor
t
Plasterboard / Wallboard
24. Knauf Drywall Sound-shield 15mm plasterboardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
HM 8x55 SS 1.11kN 0.28kN 150mm
PD10 0.53kN 0.13kN 150mm
KD8 1.30kN 0.32kN 150mm
FU10x60 0.65kN 0.16kN 150mm
GK 0.29kN 0.07kN 150mm
26. Knauf Drywall Moisture-shield 15mm plasterboardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
HM 8x55 SS 1.25kN 0.31kN 150mm
PD10 0.70kN 0.20kN 150mm
KD8 1.37kN 0.34kN 150mm
FU10x60 0.84kN 0.21kN 150mm
GK 0.37kN 0.09kN 150mm
25. Knauf Drywall Fire-shield 15mm plasterboardImage Product tested Average ultimate load Safe working load Characteristic
Axial spacing
HM 8x55 SS 1.25kN 0.31kN 150mm
PD10 0.11kN 0.03kN 150mm
KD8 1.45kN 0.36kN 150mm
FU10x60 0.77kN 0.19kN 150mm
GK 0.41kN 0.05kN 150mm
Plasterboard / Wall board
14
Sub
stra
te R
epor
t
1414
Sub
stra
te R
epor
t
14
Plasterboard / Wallboard
27. Lafarge Megadeco 15mmImage Product tested Average ultimate load Safe working load
KD 8 1.33kN 0.33kN
HM8x55 SS 1.16kN 0.29kN
HM6x52S 1.03kN 0.25kN
HM5x37S 0.76kN 0.19kN
HM4x46S 0.52kN 0.13kN
PDM100 0.38kN 0.09kN
28. British Gypsum Double layer 15mm Glasroc MultiBoardImage Product tested Average ultimate load Safe working load
HM5x65 0.8kN 0.20kN
UX8x50 R 0.7kN 0.10kN
KD6 Gravity toggle 1.4kN 0.35kN
29. British Gypsum Double layer of 15mm Gyproc SoundBlocImage Product tested Average ultimate load Safe working load
HM5x65 1.3kN 0.28kN
UX8x50 R 1.25kN 0.18kN
KD6 Gravity toggle 2.45kN 0.61kN
Plasterboard / Wall board
15
Sub
stra
te R
epor
t
15
Sub
stra
te R
epor
t
Clay Blocks
30. Womersleys Clay Bio BricksImage Product tested Average ultimate load Safe working load
SX Plug 1.6kN 0.23kN
FUR Frame Fixing 1.17kN 0.17kN
FFS Screw 0.73kN 0.18kN
FIS V 360 S Resin + FIS H N 2.9kN 0.72kN
31. NBT Zeigel BlocksBlock Type FUR 8 x 80 T
Average Ultimate Load
FUR 8 x 80 T Safe Working Load
UX 6 x 50 RAverage Ultimate Load
UX 6 x 50 RSafe Working Load
FIS V 360 SSafe WorkingLoad
Z1 1.72kN 0.2kN 1.09kN 0.15kN
0.30kN
Z2 0.83kN 0.11kN 0.93kN 0.13kN
Z3 1.78kN 0.25kN 1.1kN 0.15kN
Z4 2.07kN 0.29kN 1.36kN 0.19kN
Z5 1.05kN 0.15kN 0.59kN 0.08kN
Z6 1.61kN 0.23kN 0.94kN 0.13kN
Z7 1.4kN 0.2kN 0.9kN 0.12kN
32. Wienerberger Porotherm 190 Perforated fired clay blocksImage Product tested Average ultimate load Safe working load
UX 8 Plug 0.68kN 0.10kN
FUR 10 1.23kN 0.17kN
SXR 10 1.05kN 0.15kN
FIS V 360 S + FIS H K 6.7kN 1.67kN
Clay Blocks
16
Sub
stra
te R
epor
t
1616
Sub
stra
te R
epor
t
16
34. Bison Tensyland slab 55N/mm2 – 25mm thick wallImage Product tested Average ultimate
loadSafe working load Characteristic
Axial spacing
FIS V 360 S with Sleeve 25.8kN 6.45kN>240*>200
FHY M8 10.05kN 2.51kN >200
FHY M10 16.1kN 4.02kN >200
KD 8 Gravity Toggle 12.0kN 3.0kN >200
M Unit M10 10.6kN 1.51kN >200
FFS Screw 9.96kN 2.5kN >75
SX10 Plug & safety screw 6.78kN 0.96kN >200
Clay Blocks
33. Wienerberger Porotherm 365 Perforated fired clay blocksImage Product tested Average ultimate load Safe working load
UX 8 Plug 0.91kN 0.13 mm
FUR 10 1.15kN 0.16 mm
SXR 10 1.25kN 0.17 mm
FIS V 360 S + FIS H K 5.7kN 1.44 mm
Hollow Floor Slabs
Clay Blocks / Hollow Floor Slabs
17
Sub
stra
te R
epor
t
17
Sub
stra
te R
epor
t
Hollow Floor Slabs
35. Acheson Glover (Finlay) Hollow Core UnitsImage Product tested Average ultimate
loadSafe working load Characteristic
Axial spacing
SX 10 3.0 kN 0.43kN 150mm
M Unit M10 11.4kN 0.63kN 150mm
KD8 Gravity Toggle 8.95kN 0.24kN 150mm
FIS V 360 + M10 21.6kN 0.42kN 200mm
FFS Screw 7.5kN 1.88kN 150mm
FHY M10 14.91kN 3.72 150mm
Acheson GLOVERTHE ACHESON &GLOVER GROUP
36. Topfloor Hollowcore floor slab 150mm thickImage Product tested Average ultimate load Safe working load
Nylon M Unit 12.0kN 2.4kN
FFS Screw 5.1kN 0.96kN
38. Topfloor 225 DBT UnitImage Product tested Average ultimate load Safe working load
SX 6 2.83kN 0.33kN
N8 Hammerfix 2.75kN 0.55kN
37. Topfloor Lound M unit floor slabImage Product tested Average ultimate load Safe working load
SX10 3.6kN 0.40kN
FIS V 360 S & FIS H N + M10
20.0kN 4.00kN
FNS Shot Fire Nail 3.1kN 0.64kN
Hollow Floor Slabs
18
Sub
stra
te R
epor
t
1818
Sub
stra
te R
epor
t
18
Hollow Floor Slabs
39. Topfloor 150 Spiroll UnitImage Product tested Average ultimate load Safe working load
SX10 5.3kN 0.64kN
FDA-R M8 13.75kN 2.75kN
FDA-R M10 16.92kN 3.38kN
FBS 6 8.0kN 1.60kN
FBS 8 7.83kN 1.57kN
FNA 3.3kN 0.64kN
FHY + Gripple Hangfast 2.47kN 0.50kN
FHY M10 14.17kN 2.83kN
FHY M8 11.83kN 2.37kN
FIS V 360 S & FIS H N + M10
20.0kN 4.0kN
40. Topfloor 150 EST UnitImage Product tested Average ultimate load Safe working load
SX 6 2.33kN 0.26kN
FNA 6 M8 6.5kN 1.30kN
41. Topfloor 225 EST UnitImage Product tested Average ultimate load Safe working load
N6 Hammerfix 1.50kN 0.30kN
FNA 6 M8 6.75kN 1.35kN
Hollow Floor Slabs
19
Sub
stra
te R
epor
t
19
Sub
stra
te R
epor
t
Hollow Floor Slabs
42. Topfloor 320 IHE UnitImage Product tested Average ultimate load Safe working load
FHY M8 19.5kN 3.90kN
FHY M10 20.0kN 4.0kN
FBS 6 12.83kN 2.57kN
FBS 8 19.58kN 3.92kN
FDA-R M8 16.58kN 3.32kN
FDA-R M10 19.0kN 3.80kN
43. Topfloor 150 DBW UnitImage Product tested Average ultimate load Safe working load
SX 6 4.0kN 0.46kN
FNA 6 M8 6.75kN 1.35kN
44. Topfloor 150 DBT UnitImage Product tested Average ultimate load Safe working load
FNA 6 M8 6.5kN 1.30kN
Hollow Floor Slabs
20
Sub
stra
te R
epor
t
2020
Sub
stra
te R
epor
t
20
Thin Pre-cast Slabs
46. BubbleDeck Pre cast Structural Flooring SystemImage Product tested Average ultimate load Safe working load
FNA II 6x25/5 7.6kN 1.91kN
FBS 6x40 US 10kN 2.5kN
FBS 6 M8/M10I 18.83kN 4.70kN
FDA-R 6x25 8.3kN 2.08kN
FDA-R 8x30 11.26kN 2.81kN
FDA-R 10x30 14.16kN 3.54kN
Thin Pre-cast Slabs
Hanson 45. Hanson Hollowcore unit 200 mm deepImage Product tested Average ultimate load Safe working load
SX 10 7.8kN 1.1kN
Nylon M Unit M10 12.5kN 1.78kN
FFS Screw 11.2kN 2.8kN
FIS V 360 S Resin + FIS H N 21.7kN 5.4kN
FBS 6 17.75kN 4.4kN
FBS 8 17.3kN 4.3kN
FBS 10 15.9kN 4.0kN
FHY M10 19.7kN 4.9kN
21
Sub
stra
te R
epor
t
21
Sub
stra
te R
epor
t
47. Cobiax 50mm Precast Slabs and Omnia SlabsImage Product tested Average ultimate load Safe working load
FDA-R 6x25 12.3kN 3.1kN
FDA-R 8x30 15.6kN 3.9kN
FNA II 6x30/5 8.1kN 2.0kN
SXS 10x160 FUS 8.7kN 1.3kN
FIS V 360 S + FIS H 4.8kN 1.2kN
FBS M8/M10 I 15.5kN 3.8kN
FBS 6x40 7.3kN 1.8kN
FIS V 360 S + FZUB 14x40 17kN 4.3kN
Thin Pre-cast slabs
Thin Pre-cast Slabs
48. Cobiax 75mm Precast Slabs and Omnia SlabsImage Product tested Average ultimate load Safe working load
FDA-R 6x25 12.9kN 3.2kN
FDA-R 8x30 15.5kN 3.9kN
FDA-R 10x30 9.21kN 2.3kN
FNA II 6x30/5 8.05kN 2.01kN
SXS 10x160 FUS 7.6kN 1.09kN
FIS V 360 S + FIS H 7.53kN 1.8kN
FBS M8/M10 I 19.1kN 4.7kN
FBS 6x40 9.5kN 2.3kN
FIS V 360 S + FZUB 14x40 17kN 4.3kN
COBIAXDECK
COBIAXDECK
22
Sub
stra
te R
epor
t
2222
Sub
stra
te R
epor
t
22
Substrate Test Report - Summary
Substrate tested PD 10 UX 6 UX 8 SX 8 SX10 N 8 FUR 8 FUR 10 SXR SXS 10 HM 5 HM 8 FMD GB FTP M Unit FFS KD 6 KD 8 FNA II FDA-R 6 FDA-R 8 FDA-R 10
FBS 6 FBS 8 FSA10 FHY M8 FHY 10 *FIS V PBB 10 PBB 12 FIS V + FZUB
Medium density blocks
1. Forticrete Hi-Light - 7N/mm2 0.30 2.10 1.80 2.60
2. Master Block Multicell - 7N/mm2 0.12 0.09 2.70
3. Tarmac Hemelite 100mm Solid - 7.3N/mm2 0.33 0.80 0.73 0.90 0.73 1.33 1.53 2.01
4. Tarmac Topcrete 100mm Solid - 7.3N/mm2 0.11 0.23 0.96 1.23 1.54 1.83
5. Tarmac Topcrete multi-core block - 7N/mm2 0.31 0.38 0.35 2.90
6. Tarmac Topcrete 140mm Cellular - 7.3N/mm2 1.00 0.96 1.72
Lightweight blocks
7. Tarmac Hemelite 100mm Solid - 3.6/mm2 0.14 0.20 0.81 1.11 1.08 1.83
8. Tarmac Hemelite 100mm Cellular - 3.6N/mm2 0.10 0.56 0.69 1.80
Aircrete blocks
9. Tarmac Toplite 100mm GTI - 2.8N/mm2 0.08 0.06 0.22 0.30 0.23 0.35 1.59
10. Tarmac Durox Supabloc - 3.5N/mm2 0.20 0.30 0.27 0.34 1.15 1.34
11. Tarmac Toplite 100mm Standard - 3.6N/mm2 0.08 0.22 0.31 0.56 0.31 0.22 1.84
12. Tarmac Toplite 140mm ‘7’ - 7.3N/mm2 0.15 0.28 0.43 1.11 0.36 0.03 1.84
13. Thermalite Turbo - 2.9N/mm2 0.10 0.30 0.32 1.15 1.32
14. Thermalite Shield - 3.6N/mm2 0.16 0.25 0.31 0.33 0.97 1.12
15. Thermalite Partywall - 4.0N/mm2 0.17 0.36 0.32 0.44 0.98 1.34
16. Thermalite Hi Strength 7 - 7.3N/mm2 0.38 0.53 0.30 0.48 1.78 2.03
Plasterboard/Wallboard
17. British Gypsum 12.5mm Glasroc MultiBoard 0.12 0.16 0.22 0.33
18. British Gypsum 12.5mm Gyproc WallBoard 0.07 0.14
19. British Gypsum 15mm Gyproc SoundBloc 0.10 0.12 0.18 0.18 0.25
20. British Gypsum 15mm Gyproc DuraLine 0.11 0.13 0.21 0.23 0.29
21. British Gypsum 15mm Gyproc FireLine 0.09 0.11 0.27 0.43
22. Knauf Drywall Standard 15mm plasterboard 0.12 0.03 0.25
23. Knauf Drywall Dense-shield 15mm plasterboard 0.10 0.40 0.38
24. Knauf Drywall Sound-shield 15mm plasterboard 0.13 0.28 0.32
25. Knauf Drywall Fire-shield 15mm plasterboard 0.03 0.31 0.36
26. Knauf Drywall Moisture-shield 15mm plasterboard 0.20 0.31 0.34
27. Lafarge Megadecco 15mm (see report for additional fixings) 0.19 0.29
28. British Gypsum Double layer 15mm Glasroc MultiBoard 0.18 0.20 0.61
29. British Gypsum Double layer of 15mm Gyproc SoundBloc 0.18 0.28 0.61
Clay blocks
30. Womersleys Clay Bio Brics 0.23 0.17 0.18 0.72
31. NBT Ziegel Blocks (average loads - see report) 0.14 0.20
32. Wienerberger Porotherm 190 Perforated fired clay blocks 0.10 0.15 0.17 1.67
33. Wienerberger Porotherm 365 Perforated fired clay blocks 0.13 0.16 0.17 1.44
Hollow floor slabs
34. Bison Tensyland slab 55N/mm2 – wall thickness 25mm 0.96 1.51 2.50 3.00 2.51 4.02 6.45
35. Finlay Hollow Core Units 0.43 1.63 1.88 2.24 3.72 5.42
36. Topfloor Hollowcore floor slab 150mm thick 2.40 0.96
37. Topfloor Lound M unit floor slab 0.40 0.64 4.00
38. Topfloor 225 DBT Unit 0.33 0.55
39. Topfloor 150 Spiroll Unit 0.64 0.64 2.75 3.38 1.60 1.57 2.37 2.83 4.00
40. Topfloor 150 EST Unit 0.26 1.30
41. Topfloor 225 EST Unit 0.30 1.35
42. Topfloor 320 IHE Unit 3.80 2.57 3.92 3.90 4.00
43. Topfloor 150 DBW Unit 0.46 1.35
44. Topfloor 150 DBT Unit 1.30
45. Hanson Hollowcore unit 200 mm deep 1.10 1.78 2.80 4.40 4.30 4.90 5.40
Thin pre-cast voided slabs
46. BubbleDeck Pre cast Structural Flooring System 1.91 2.08 2.81 3.54 2.50
47. Cobiax 50mm Precast Slabs and Omnia Slabs 1.30 2.00 3.10 3.90 1.80 1.20 4.30
48. Cobiax 75mm Precast Slabs and Omnia Slabs 1.09 2.01 3.20 3.90 2.30 2.30 1.80 4.30
*FIS V results are using different accessories - please see full reports. For full details please see full reports or contact fischer Fixings Technical Department on 01491 727920
23
Sub
stra
te R
epor
t
23
Sub
stra
te R
epor
t
Substrate tested PD 10 UX 6 UX 8 SX 8 SX10 N 8 FUR 8 FUR 10 SXR SXS 10 HM 5 HM 8 FMD GB FTP M Unit FFS KD 6 KD 8 FNA II FDA-R 6 FDA-R 8 FDA-R 10
FBS 6 FBS 8 FSA10 FHY M8 FHY 10 *FIS V PBB 10 PBB 12 FIS V + FZUB
Medium density blocks
1. Forticrete Hi-Light - 7N/mm2 0.30 2.10 1.80 2.60
2. Master Block Multicell - 7N/mm2 0.12 0.09 2.70
3. Tarmac Hemelite 100mm Solid - 7.3N/mm2 0.33 0.80 0.73 0.90 0.73 1.33 1.53 2.01
4. Tarmac Topcrete 100mm Solid - 7.3N/mm2 0.11 0.23 0.96 1.23 1.54 1.83
5. Tarmac Topcrete multi-core block - 7N/mm2 0.31 0.38 0.35 2.90
6. Tarmac Topcrete 140mm Cellular - 7.3N/mm2 1.00 0.96 1.72
Lightweight blocks
7. Tarmac Hemelite 100mm Solid - 3.6/mm2 0.14 0.20 0.81 1.11 1.08 1.83
8. Tarmac Hemelite 100mm Cellular - 3.6N/mm2 0.10 0.56 0.69 1.80
Aircrete blocks
9. Tarmac Toplite 100mm GTI - 2.8N/mm2 0.08 0.06 0.22 0.30 0.23 0.35 1.59
10. Tarmac Durox Supabloc - 3.5N/mm2 0.20 0.30 0.27 0.34 1.15 1.34
11. Tarmac Toplite 100mm Standard - 3.6N/mm2 0.08 0.22 0.31 0.56 0.31 0.22 1.84
12. Tarmac Toplite 140mm ‘7’ - 7.3N/mm2 0.15 0.28 0.43 1.11 0.36 0.03 1.84
13. Thermalite Turbo - 2.9N/mm2 0.10 0.30 0.32 1.15 1.32
14. Thermalite Shield - 3.6N/mm2 0.16 0.25 0.31 0.33 0.97 1.12
15. Thermalite Partywall - 4.0N/mm2 0.17 0.36 0.32 0.44 0.98 1.34
16. Thermalite Hi Strength 7 - 7.3N/mm2 0.38 0.53 0.30 0.48 1.78 2.03
Plasterboard/Wallboard
17. British Gypsum 12.5mm Glasroc MultiBoard 0.12 0.16 0.22 0.33
18. British Gypsum 12.5mm Gyproc WallBoard 0.07 0.14
19. British Gypsum 15mm Gyproc SoundBloc 0.10 0.12 0.18 0.18 0.25
20. British Gypsum 15mm Gyproc DuraLine 0.11 0.13 0.21 0.23 0.29
21. British Gypsum 15mm Gyproc FireLine 0.09 0.11 0.27 0.43
22. Knauf Drywall Standard 15mm plasterboard 0.12 0.03 0.25
23. Knauf Drywall Dense-shield 15mm plasterboard 0.10 0.40 0.38
24. Knauf Drywall Sound-shield 15mm plasterboard 0.13 0.28 0.32
25. Knauf Drywall Fire-shield 15mm plasterboard 0.03 0.31 0.36
26. Knauf Drywall Moisture-shield 15mm plasterboard 0.20 0.31 0.34
27. Lafarge Megadecco 15mm (see report for additional fixings) 0.19 0.29
28. British Gypsum Double layer 15mm Glasroc MultiBoard 0.18 0.20 0.61
29. British Gypsum Double layer of 15mm Gyproc SoundBloc 0.18 0.28 0.61
Clay blocks
30. Womersleys Clay Bio Brics 0.23 0.17 0.18 0.72
31. NBT Ziegel Blocks (average loads - see report) 0.14 0.20
32. Wienerberger Porotherm 190 Perforated fired clay blocks 0.10 0.15 0.17 1.67
33. Wienerberger Porotherm 365 Perforated fired clay blocks 0.13 0.16 0.17 1.44
Hollow floor slabs
34. Bison Tensyland slab 55N/mm2 – wall thickness 25mm 0.96 1.51 2.50 3.00 2.51 4.02 6.45
35. Finlay Hollow Core Units 0.43 1.63 1.88 2.24 3.72 5.42
36. Topfloor Hollowcore floor slab 150mm thick 2.40 0.96
37. Topfloor Lound M unit floor slab 0.40 0.64 4.00
38. Topfloor 225 DBT Unit 0.33 0.55
39. Topfloor 150 Spiroll Unit 0.64 0.64 2.75 3.38 1.60 1.57 2.37 2.83 4.00
40. Topfloor 150 EST Unit 0.26 1.30
41. Topfloor 225 EST Unit 0.30 1.35
42. Topfloor 320 IHE Unit 3.80 2.57 3.92 3.90 4.00
43. Topfloor 150 DBW Unit 0.46 1.35
44. Topfloor 150 DBT Unit 1.30
45. Hanson Hollowcore unit 200 mm deep 1.10 1.78 2.80 4.40 4.30 4.90 5.40
Thin pre-cast voided slabs
46. BubbleDeck Pre cast Structural Flooring System 1.91 2.08 2.81 3.54 2.50
47. Cobiax 50mm Precast Slabs and Omnia Slabs 1.30 2.00 3.10 3.90 1.80 1.20 4.30
48. Cobiax 75mm Precast Slabs and Omnia Slabs 1.09 2.01 3.20 3.90 2.30 2.30 1.80 4.30
Loads shown are recommended loads
242424
fischer Substrate Report 2012 / 01
fischer fixings UK Ltd.Whitely RoadWallingfordOXON. OX10 9AT
Customer ServicesTel: 01491 827 900Fax: 01491 827 953E-mail: [email protected] / [email protected] Finance / Accounts:Tel: 01491 827 930Fax: 01491 827 952
fisch
er S
ubst
rate
Rep
ort ·
04
-20
12
/V1
· N
o lia
bilit
y is
acc
epte
d fo
r prin
ting
erro
rs a
nd o
mis
sion
s.
Technical Service If you need any assistance, simply contact your local fischer representative. For more specialised application problems please contact our Technical Services Team.
fischer Fixings UK Ltd. Wallingford, Oxon, OX10 9AT.
Phone 01491 827 920 e-mail: [email protected]
Technical TrainingWe also offer training seminars suited to your individual needs and requirements. Please call the number above to find out more