Upload
others
View
64
Download
0
Embed Size (px)
Citation preview
Flasher Pro
Flasher Pro (J2534 Reprogrammer) Vehicle Interface Module (all vehicle makes capable)
Easy reprogramming with confidence for all vehicle makes and models.
It is estimated that 60% of vehicles (1996 to present) have OEM ECU calibration updates available, presenting the opportunity to the service shop for a quick return on investment (ROI).
The Flasher Pro Vehicle Interface Module (VIM), along with OEM programming application software, provides dealer-level programming capabilities for all makes, all models at a fraction of the cost of a proprietary OEM dealer diagnostic tool, and unlimited expansion technology for your future. Free upgrades to firmware available via the diagnostic website: www.boschdiagnostics.com
Note: Requires the use of OEM software purchased from the OEM website.
F00E900161 Flasher Pro
Vehicle Interface (all makes, all models) Connects to vehicle OBDII J1962 DLC via a cable. Pre-2004 vehicles (1996–2003) may use an OEM proprietary connector requiring a special cable adapter.
PC/Host Interface:RS232 or USB connection to a PC for vehicle programming and firmware updates.
2213813 0912 F00E380806 © 2012 Robert Bosch LLC | 2800 South 25th Avenue | Broadview, IL 60155 | www.boschdiagnostics.com | 800-321-4889 ext. 4
Bosch recommends J2534 reprogramming in three easy steps to prevent costly damage to the vehicle ECU
1. Test vehicle battery with the BAT 131
Benefit: BAT 131 helps ensure that the vehicle has a strong battery. If the battery is weak, it needs to be charged or replaced prior to reprogramming to ensure successful reprogramming
2. Connect the BAT 55 Stable Power Supply and Flasher Pro
Benefit: BAT 55 provides a clean, reliable power supply for charging and maintaining battery state-of-charge during ECU reprogramming service
3. Using the OEM application software, reprogram the vehicle according to OEM procedures
0 684 400 732 BAT 131F00E900068 Optional Dual-range Amp Clamp 180–700A
2
F00E900373 BAT 55
Name Value
Input Voltage Range 6VDC to 26VDC
Supply Current 320mA @ 6VDC 200mA @ 12VDC 170mA @ 15VDC
Operating Temperature +0°C to +60°C ambient
Storage Temperature -65°C to +100°C ambient
Size 1.25" H x 7.5" D x 5.25" W
Flasher Pro SpecificationsFlasher Pro reprogramming packages:
f Good: – F00E900374 : BAT 55 and
Flasher Pro package f Better :
– F00E901007 : BAT 55, BAT 131 and Flasher Pro package
f Best : – F00E901008 : BAT 55, BAT 131 and
Flasher Pro and M-VCI Trio package