Embed Size (px)
Citation preview
Product Reference
Flat Products
Connection Node
Kronprinzenstraße 1445128 Essen Tel. +49 201/81 10-180Fax +49 201/81 10-174
ameca von Schaewen GmbHStrickerstr. 31 · 45329 Essen
SSK von Schaewen Hückeswagen GmbHStahlschidtsbrücke 20 · 42499 Hückeswagen
SSK von Schaewen Wetter GmbHRuhrstr. 21 · 58300 Wetter
von Schaewen Polska Sp. z o.o.ul. Wojska Polskiego 84E · PL-41-600 Swietochlowice
von Schaewen AG
Product Reference
Flat Products
Connection Node
Specification connection nodeflame cutted in 2 resp. 3 axesshot-blasted acc. toDIN II A 55928-SA 2,5MTC DIN EN 10204/3.1B
End Use connection for steel and glass roof construction
Steel Grade S355J2G3 and S460N
Dimension approx. 180 x 197 x 327 mm
Weight 27 up to 89 kg (raw)
These connection nodes serve as connecting pieces for a steel-glass roof construction. MSH profile which are custom-sawed are attached to these. They support the glass elements and enable three- dimensional architecture. The construction design has already been implemented at several locations in Europe and guarantees spectacular views.
In total, more than 1,500 of these nodes from plate in 2-axis, 3-axis or three-dimensionally have been
burned. Scarcely any one burning part is similar to another. In a further stage, the material was shot- blasted and accepted in our own testing laboratory.
In case of an individual unit production time per connection node of approximately 16 minutes, the projects could be delivered complete after only four months in each case. Thus the high expectations of our customer could be met as a result of trouble-free joint cooperation with our experienced employees.
