-
Client:
Project:
Type:
Order Code:
Quantity:
Flex One SO Exterior provides the best in class color rendering,
fidelity, and gamut of any LED strip product. It can be cut in one
inch increments to create the exact length needed for your specific
application. It is available in 2700K, 3000K, & 4000K, and
features a lumen output of up to 250 per foot, with a minimum CRI
of 95. The combination of it’s high output, low profile, and IP68*
rating allows for a wide variety of cove, millwork, signage, and
many other exterior applications.
SPECIF ICATIONS
Specifications subject to change without
noticeacclaimlighting.com1
Specifications subject to change without
noticeacclaimlighting.com1
Colors 2700K, 3000K, 4000K
Spool Length + Cut Points
Beam Angle
16.4’ (5m), cut points every 1” (25mm)
126º
Max Fixture Runs 16.4’ (5m) - 1 spool maximum
Photometrics Up to 200 lumens per foot, >95 CRI
Symmetric forward phase control (MLV), DMX, 0-10V (sink and
source), DALI
Power Consumption Minimum of 2.43W per foot (40W per spool), see
page 5 for per section details.
Operating Voltage 24VDC
Lumen Maintenance L70 @ 50,000 hours (25º C)
Mounting 10 plastic mounting clips + screws included, optional
aluminum channels available
Finish White
Material Copper strip, silicone jacket
Ambient Operating Temperature -40º F to 122º F (-40º C to 50º
C)
IP Rating IP68*, wet location & submersible
*UL approval currently limits submersible installation to
non-human occupied and freshwater locations only. All cables must
be landed in environmentally suitable junction boxes.
IK Rating IK06, protection up to 1 joule impact
Fixture Connectors 3.28’ (1m) attached feed cable included
Warranty 3 years standard, 5 years optional (additional
charge)
Weight 1 lbs (0.5kg)
Dimensions
Certifications
Dimming Protocols
FLEX ONE SO EXTERIORTM
SPECIFICATION SHEET 2.1.6
W: 0.51” H: 0.20” L: 16.4’ (13 x 5 x 5000mm)
-
ORDER CODES
* indicates special order
FLEXOSE#
RELATED COMPONENTS
Color: 27 = 2700K3 = 3000K4 = 4000K
Specifications subject to change without
noticeacclaimlighting.com2 SPECIFICATION SHEET 2.1.6
Single Channel Multi Protocol Driver (for use with stand alone
power supplies above when dimming is required)
APS-240-244 spools maximum240W, 24VDC, Dry location, DIN rail
mount115-230VAC (47-63Hz) input
APS-300-24-IP6 spools maximum240W, 24VDC, IP66 Damp location,
100-277VAC (50-60Hz) input
APS-480-249 spools maximum480W, 24VDC, Dry location, DIN rail
mount115-230VAC (47-63Hz) input
ALD001AL Driver 1Single channel DMX + 0-10V (sink & source)
driver, 0 -100% dimming range6-24VDC input, 1 spool maximumUse in
conjunction with APS series
Power Supplies (for use with single channel drivers or non
dimming applications)
FLEX ONE SO EXTERIORTM
-
SPECIFICATION SHEET 2.1.6Specifications subject to change
without noticeacclaimlighting.com
3
RELATED COMPONENTS
M96L24DC2 spools maximum96W, 24VDC, Wet location120VAC input,
1-100% dimming range
M300L24DC6 spools maximum300W, 24VDC, Wet location120VAC input,
1-100% dimming range
M96L24DC-277V2 spool maximum96W, 24VDC, Wet location277VAC
input, 1-100% dimming range
M300L24DC-277V6 spools maximum300W, 24VDC, Wet location277VAC
input, 1-100% dimming range
Power Supplies (MLV) *Approved in line dimmer required*
High Wattage Multi-protocol Drivers
FLEX ONE SO EXTERIORTM
ALD-800-24AL Driver 800 24V, 18 spools max800W 24V power supply
+ DMX, 0-10V (sink & source) & DALI driver10 output ports,
100-277VAC input
ALD-400-24AL Driver 400 24V, 9 spools max400W 24V power supply +
DMX, 0-10V (sink & source) & DALI driver6 output ports,
100-277VAC input
ALD-200-24AL Driver 200 24V, 4 spools max200W 24V power supply +
DMX, 0-10V (sink & source) & DALI driver4 output ports,
100-277VAC input
-
SPECIFICATION SHEET 2.1.6Specifications subject to change
without noticeacclaimlighting.com
4
RELATED COMPONENTS
Flex Channels (please see individual channel spec sheets for
accessory details)
0-10V Sink Dimmable, Multi Voltage Driver
FLX444Flex channel low profile4‘ (1.21m)
FLX888Flex channel tall profile4‘ (1.21m)
FLX777Flex channel recessed4‘ (1.21m)
FLK DWM+DWC/DWFFlex dry wall channel3.28‘ (1m)
FLK DULFlex dual channel3.28‘ (1m)
FLEX ONE SO EXTERIORTM
CVD60L24DC1 spool maximum60W, 24VDC, Wet location120-277VAC
input, 1-100% dimming range
FLK EXLFlex exterior line channel3.28‘ (1m)
-
SPECIFICATION SHEET 2.1.6Specifications subject to change
without noticeacclaimlighting.com
5
WIR ING
Dimmed mains 120VAC input
From transformer
To 0V
+24VDC
Flex One
Wire size guide (w/ 1.7A load)
Gauge Cond. Max feet to flex
18 AWG 2 80
14 AWG 2 200
12 AWG 2 300
FLEX ONE SO EXTERIORTM
DIMENSIONS
3.28’ (1M)
0.98” (25mm)
0.163” (4.16mm)
16.4’ (5M)
0.51” (13mm)
-
SPECIFICATION SHEET 2.1.6Specifications subject to change
without noticeacclaimlighting.com
6
POWER CONSUMPTION CHART
1’ (IES test samples)
40W, 2.43W p/f
34W, 2.26W p/f
16.4’ (full spool)
15’
32W, 2.28W p/f
30W, 2.3W p/f
14’
13’
28W, 2.33W p/f12’
26W, 2.36W p/f11’
20W, 2.5W p/f8’
18W, 2.57W p/f7’
16W, 2.66W p/f6’
14W, 2.8W p/f5’
12W, 3W p/f4’
9W, 3W p/f3’
6W, 3W p/f
3W, 3W p/f
2’
24W, 2.4W p/f10’
22W, 2.44W p/f9’
Length Max. Power Consumption
FLEX ONE SO EXTERIORTM
PHOTOMETRICSPHOTOMETRICS
Photometric testing in progress
Color Lumens (per foot) Max Candela CRI R9 TM30 Rf RgCQS
2700K 151 46.1 95.0 76 87.6 87.6 92.985.9
3000K 154 46.5 95.7 78 87.8 87.8 93.787.8
4000K 201 58.0 96.4 87 87.5 87.5 95.292.4
