Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
®
FLEXIBLE AND EFFICIENT DEMOLITION325D, 330D, 345C, 365C, 385C ULTRA-HIGH DEMOLITION (UHD)
2
A Dynamic and Complex Business
Demolition has changed. It has become a dynamicand increasingly complex business. Today there arefew demolition jobs where buildings can simply beknocked, pulled or blown down using traditionaltools. What’s more, contract periods are becomingshorter, legislation is stricter, environmentalpressure is increasing and skilled labour is harderto find. As a consequence, demolition contractorsare looking for the most efficient, cost effective andsafe methods of deconstructing buildings andstructures.
3
Increasing Productivity throughoutthe Process
325D UHD (18 m) 37.5 17 500 10700 3000 3000
330D UHD (21 m) 47.9 21300 13900 3000 2700
345C UHD (26 m) 66.7 26100 16400 3300 3000
345C UHD (28 m) 67.0 27900 18200 2500 2500
365C UHD (33 m) 85.7 33100 21500 3000 2000
385C UHD (40 m) 98.7 39500 25200 2400 2100
Ultra High Demolition
* Maximum weight in UHD configuration with heaviest undercarriage. Figures are approximate and do not include the tool.** Includes potential quick coupler and mounting bracket. The max. tool weight depends on the U/C configuration.
Caterpillar engineers have designed and produced specialized machines with the objective ofincreasing productivity at every stage of the process. Added to that, our machines have beendeveloped with an emphasis on stability, durability and ease of use. They also come with the back-upof your local Cat dealer. They can help you with finding the right machine and tools for the job andadvise you how to get the most out of your equipment.
Max tool weight (over the front)**
kg
Max horizontal pin reach
mm
Max pin height
mm
Weight*
(metric tons)
Max tool weight (360°)**
kg
4
Visual Overview – Index
Boom Hook System p. 10A reliable boom hook system enables to switch from Ultra High Demolition(UHD) front parts to standard or LongReach Excavation (LRE) configurations*.These retrofit booms can be installedeither in bent or in straight position.
Hydraulic Quick Disconnects and face-to-face ball valves p. 10Hydraulic lines are fitted with quick disconnects or face-to-face ball valves to reduce the time needed to change the front parts.
Ultra-HighDemolition Linkage p. 9Optimized working range and improvedtool controllability, thanks to an UHD-dedicated tool linkage.
Tool Cylinder protection p. 7Thanks to this metal box, the tool cylinderis protected in all working positions.
* Long Reach Excavation (LRE) Retrofit front parts are available on demand.
5
Heavy Duty Upper Frame p. 6Reinforced structures to withstand theextreme conditions of the demolitionapplications.
Integrated TiltableDemolition Cab p. 8Hydraulic cab tilting device for operatorcomfort. Enhanced upper visibilitythrough larger impact-resistant windowswith Falling Object Guard System (FOGS).
Undercarriage p. 11Several undercarriage options.
Tools p. 12Several tool options maximize versatility.
6
ReliabilitySeveral major features make the Caterpillar Ultra High Demolition (UHD) models the most reliable machines indemolition applications.
Standard
Reinforced upper frame
Heavy-duty
Swing bearing bolts
Upper Frame and CounterweightPurposely designed and built for extreme conditions.
Reinforced upper frameThe heavy-duty reinforced upper frames of the CAT UHD models aredesigned to withstand the extreme load conditions of demolition applications.Compared to a standard upper frame, several additional plates provide thedurability and strength required in these environments.
Swing bearing to upper frame boltsThe swing bearing bolts are 20 mm longer on the back half of upper frame for increased joint retention. Bolt grade is increased from 10.9 to 11.9 forincreased bolt torque of swing bearing to upper frame and carbody.
CounterweightA heavier counterweight balances the swing bearing and provides enhancedstability.
Front PartsAll Caterpillar booms and sticks have internal baffles which give thestructures extra strength and durability. They are designed based on aprecise finite element analysis that highlights all the potential stress areasunder all possible load cases. These specific areas are then reinforcedaccordingly.
Caterpillar excavator booms and sticks are built for performance and longservice life.
– Castings and forgings are used at high stress areas such as boom nose,boom foot, boom cylinder and stick foot.
– Large, welded, box-section structures with thick, multi-plate fabrications in high-stress areas to better withstand torsional loads.
– All booms and sticks go through a stress relief heat treatment to maximizefatigue life and durability.
7
Tool cylinder protection
Demolition sticks
Hardened bores
Hardened bore
+ thicker plates(top, bottom and side)
Bottom wear plate
Additional internal baffles
Tool Cylinder ProtectionTo prevent damage to the tool cylinder rod caused by falling concrete anddebris, the tool cylinder is equipped with a heavy duty metal cover. Thanks toits unique construction, the cover protects the cylinder rod in every position.
Demolition SticksThe Demolition sticks are made of thick plates (on top, bottom and side) andhave additional internal baffles to improve their resistance to torsion stresses.They also feature hardened bores at all connections (connections with boomand tool linkage). Additional wear plates on the bottom side and around thenose extend the whole stick life.
8
Operator Comfort and SafetyOperator comfort and safety is critical in demolition applications.
Hydraulically tiltable cab The hydraulically tiltable cab tilts back to further improve upward visibilityand to allow the operator to adopt a more comfortable body position. The tiltable cab is integrated into the upper frame and therefore does notincrease the machine's shipping height. Moreover, because of the integrationinto the upper frame, no tilt parts are exposed to the demolition environment.To reduce vibrations and sound, the cab shell is attached to the frame withviscous mounts.
Automatic climate controlFully automatic climate control adjusts temperature and flow and determineswhich air outlet is best in each situation.
High visibility demolition cabThe thick laminated safety glass front window is one-piece with a bottommounted parallel wiper for excellent visibility. For enhanced upward visibility,the impact resistant top window extends completely to the rear and has a wiper and washer.
Falling object guardThe ISO 10262-1998 certified falling object guard on top and front of the cab is standard. The crossbars of the top guard are angled in line with theoperator’s sight for enhanced visibility of the work tool. The front guardswings out for easier windshield cleaning.
9
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
m
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2
Productivity
Working HeightWhile the maximum pin height is given as a reference to compare machines,the actual “working height” is always different. An experienced operator willnever work above a safety line that extends from the front edge of the tracksand follows a “1:2” rule (2 meters of vertical height for 1 meter of horizontalreach). Working under this line is generally accepted as a safety rule to avoidany risk of debris falling on the machine. Caterpillar UHD excavators havebeen purposely designed with the “1:2” line in mind and show therefore thebest working heights and enhanced performances along that line.
Dedicated UHD tool linkageBecause UHD applications require different working positions than standardapplications, CAT engineers developed a purpose-designed linkage for theUHD front parts. Besides providing an optimized working envelope, thislinkage also greatly improves the tool controllability.
Cat Ultra High Demolition (UHD) machines are designed for maximum productivity in all demolition applications.
“1:2” line
Maximum pin heightMaximum working height
10
The extreme versatility of the Cat Ultra High Demolition (UHD) models enable these machines to work in a wide range ofapplications, like truck loading and long reach digging.
High versatility
Tool control
Hydraulic quick disconnects
Boom hook system
Retrofit (short 2P, LRE 2P on 330D UHD)
Versatility – retrofitA short boom nose can be hooked onto the bottom foot. To maximize themachine's extreme versatility, this boom nose can be put in two differentpositions. The straight position is ideal for working in above ground levelapplications, such as low level demolition or sorting. The bent position canbe used for applications such as digging or truck loading. For long reach digging and extracting applications, two-piece long reachexcavation attachments can be adapted to the base demolition machine of the 330D UHD model. These LRE front parts also have the two mountingpositions. Optional medium pressure lines also enable the use of tilting buckets.
Boom Hook System with Quick DisconnectsBoom hook systemThe front parts are equipped with a reliable and safe hook system betweenthe boom foot and boom nose. Compared to the traditional pin-mounted joint,the hook system significantly reduces the time needed to change betweenthe Ultra-high front parts and the retrofit configurations. In principle, theboom hook system consists of a hook to pick up the front parts and amechanical expander pin to secure them onto the boom foot. The absence ofany hydraulic parts, as well as a full length heavy duty one-piece securingpin, ensure safe and reliable operation. The operator has an excellent view of the hook system from the cab to easily change the front parts.
Hydraulic quick disconnects and face-to-face ball valvesOn 325D and 330D, the hydraulic lines between boom foot and boom nose are fitted with hydraulic quick disconnects to even further reduce the timeneeded to change the front parts. Oil spillage and contamination is reducedthrough the quick disconnects flat-face design. On larger models, face-to-face ball valves assure the unmatched reliability required for high hydraulic flows.
Tool Control SystemTool controlTen hydraulic pump flow and pressure settings can be preset on the monitor(Electronic Control System), eliminating the need to adjust the hydraulicseach time a tool is changed. Selecting the proper setting from the monitor'smenu instantly provides the operator with the correct amount of flow andpressure for the tool. The unique Cat proportional sliding switches providemodulation to the tool and make precision work easy.
Versatility
slide-in expander pin
11
325D 325D 325D 330D 330D 330D 330D 345C 345C 365C 385CL LN HDHW L LN HDHW HVG L HVG L L
325D UHD � � �
330D UHD � � � � �
345C UHD � � �
365C UHD �
385C UHD �
Undercarriage Options for UHD
330D HVG
325D HDHW
UndercarriageSeveral undercarriage options are available to choose the best machine for the application and business needs. A variety of standard and heavy-duty track shoes are available for various underfoot conditions.
Long Undercarriage (L)The long undercarriage provides a stable and rugged working platform fordemolition.
Long Narrow Undercarriage (LN)The long narrow undercarriage reduces shipping width while maintaining excellent performance.
Hydraulic Variable Gauge Undercarriage (HVG)The hydraulic variable gauge undercarriage increases the stability throughincreased track gauge in working position, as well as by lowering the centerof gravity of the machine. The non-bolt joint allows a change from shipping to working width, or reverse, in less than one minute.
Heavy Duty High Wide Undercarriage (HDHW)Compared to the long undercarriage, the heavy-duty high wide undercarriage(HDHW) provides increased over-the-side stability as well as increasedground clearance. Thicker carbody plates, plus larger box-section heightteam up to provide superior joint retention and durability in demolitionapplications.
Extreme Service Undercarriage (ES)The 330D and 345C UHD models can also be equipped with an upsizedundercarriage called "Extreme Service" undercarriage. Mounted on a 330D, the 345C L variable gauge heavy-duty, H-shaped long undercarriage providesease of transport and a stable platform when working on a variety of sites.Another benefit of the 345C L undercarriage is the increased groundclearance. With 600 mm track shoes, the track roller frames can be retractedto a transport width of less than three meters. The ES undercarriage isstandard on the 365C UHD (365C base machine with 385C L undercarriage).
12
Connect'o'maatTM dedicated Quick CouplersThe Connect'o'maat dedicated quick coupler is available in reinforcedversion with a special shape for UHD applications. It can pick up any worktool, equipped with optimized hinges for maximum breakout force and haswide interchangeability over different machine size classes.
• Cast body for high strength
• Solid and wear resistant construction
• Hydraulic versions (all size excavators)
• Spindle versions (up to and including model 345C)
• Easy to operate
• Minimal loss of breakout force.
Only CW40 or CW40s, CW45 or CW45s ("s" is for the narrow version of the QC)for UHD. Two different wedge systems available: Mechanical with spindle (D)and Hydraulic (H) requires actuation and control unit.
Sorting and Demolition GrapplesCaterpillar Sorting and Demolition Grapples feature 360 degree hydraulicrotation. They are equally well suited for demolition of brick and woodstructures. These grapples are extremely effective to dismantle the exteriorof the building. Wood, stone and steel are separated from each other at thesource.
Features:
360° Hydraulic RotationGrapple is equipped with a hydraulic rotator, capable of spinning the grapplea full 360° in four seconds. The operator can precisely position the grapple atany angle to easily grasp irregularly-shaped loads, or precisely pick and sortmaterial from a pile.
Replaceable Wear Plates Cutting edges feature bolt-on, reversible wear plates of Hardox 500 steel.These long-wearing plates can be rotated 180 degrees for double the normalamount of service life before needing to be replaced.
Built For Demolition The rugged construction, speed (1.7 second open-close cycle time), andclamping force are designed for the high-demand demolition job site.
Bolt-on Mounting Brackets The grapple is equipped with a bolt-on mounting bracket, allowing for theunit to be easily adapted to work with multiple machine linkages.
Mechanical with spindle CW-05 up to CW-55(s)
Hydraulic requires actuation and control unitCW-05 up to CW-100
Work ToolsThe right work tools are critical when it comes to getting the best productivity and flexibility from a machine.
13
Multi-Processors for ExcavatorsWe have hydraulic continuous-rotating demolition tools with interchangeablejaws for crushing, cutting and pulverizing concrete, metal structures and bulkmaterial. The multi-processor can fit various HEX front parts configurationincluding retrofit boom, straight boom, UHD (Dedicated linkage).
Features:
SpeedThe single large diameter, cross-mounted cylinder with speed valve providesexceptional cutting and crushing force.
360° rotationThe Multi-Processor features hydraulic 360° rotation; the unit can attackmaterial to be demolished from virtually any angle, minimizing the need tomove the base carrier.
FlexibilityEach Multi-processor can be equipped with a wide selection ofinterchangeable jaws. With one common housing and properly selected sets of jaws a contractor can achieve exceptional flexibility with minimuminvestment.
Demolition Shears S320, S325These shears can grab and pick material from a pile easily, without requiringmovement of the base carrier. The S300 series are very efficient toolsbecause of the high force to weight ratio. The blades are made ofexceptionally long-wear alloy steel and have proven speed valves thatimprove cycle times from 6 to 9.5 seconds depending on shear type andexcavator model. The jaw openings of the shears are matched to the highshear force. The cutting edges, mounted on the side of the shear jaws, arevisible to the operator and the locking system means they can be removedsafely and easily.The robust rotation system with up to two hydraulic motors on the largestshears, provides system integrity under demanding conditions in scrap yardsas well as on demolition sites. The motor torque and the structural strengthof the slewing ring make it possible to handle heavy loads corresponding tothe lift capacity of the excavator.
Benefits• Large gap in lower jaw for better cutting performance
• Cutting edge configuration prevents jamming
• Easy to mount
• Simple removal of wear parts and easy maintenance of hydraulics.
Work Tools
Primary Pulverizer Jaws
Concrete Cutter Jaws
Change jaws in 20-30 minutes by dedicatedjaw quick change system.
Crusher Jaws
Shear Jaws
14
* Without tool** May vary depending on the stick and the bucket
Specifications – 325D (18 m)
LONG HD-HW LN
mm 12 500 12 500 12 500
mm 2920 2920 2920
mm 3205 3430 3205
mm – – –
mm 2590 2920 2390
mm 480 660 480
kg 36 200 37 500 35 200
kg 34 330 35 690 32 960
Undercarriage
Shipping Length
Boom Height
Cab Height (with FOGS)
Shipping Gauge (retracted position)
Working Gauge (extended position)
Ground Clearance
Machine Weight (UHD configuration) *
Machine Weight (Retrofit Configuration) **
Dimensions and Weights
LONG HD-HW LN
20° 20° 20°
mm 10 730 10 730 10 730
mm 17 310 17 530 17 310
kg 3000 3000 3000
kg 2500 3000 2200
Undercarriage
Maximum allowable angle from vertical
Maximum Horizontal Reach
Maximum Pin Height
Maximum Tool Weight (over the front)
Maximum Tool Weight (over the side)
Working Range
Engine Cat C7 with ACERT™ Technology
Ratings rpm 1800
Net Power (ISO 9249) kW/hp 140/190
Engine Specs
B
A
C
D
E
A
B
C
D
D
E
A
B
C
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
11 10 9 8 7 6 5 4 3 2 1 0 1 2
m
B
C A
Dimensions and weights Working range
LONG HD-HW LN HVG ES
25° 25° 25° 25° 25°
mm 13 850 13 850 13 850 13 850 13 850
mm 21 060 21 290 21 060 21 120 21 270
kg 3000 3000 3000 3000 3000
kg 1800 2450 – 2700 2700
Undercarriage
Maximum allowable angle from vertical
Maximum Horizontal Reach
Maximum Pin Height
Maximum Tool Weight (over the front)
Maximum Tool Weight (over the side)
Working Range
Specifications – 330D (21 m)
* Without tool** May vary depending on the stick and the bucket
LONG HD-HW LN HVG ES
mm 14 830 14 830 14 830 14 830 14 830
mm 3100 3100 3100 3100 3100
mm 3360 3590 3360 3410 3560
mm – – – 2390 2390
mm 2590 2920 2390 2820 2890
mm 510 720 510 480 740
kg 42 360 43 930 41 910 47 870 46 940
kg 40 340 41 780 39 710 47 350 45 500
kg – 43 020 – 46 960 46 030
Undercarriage
Shipping Length
Boom Height
Cab Height (with FOGS)
Shipping Gauge (retracted position)
Working Gauge (extended position)
Ground Clearance
Machine Weight (UHD configuration) *
Machine Weight (Retrofit Configuration) **
Machine Weight (LRE Retrofit configuration)
Dimensions and Weights
Engine Cat C9 with ACERT™ Technology
Ratings rpm 1800
Net Power (ISO 9249) kW/hp 200/270
Engine Specs
A
B
C
A
B
C
D
D
E
B
A
C
D
E 0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
m
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2
B
C
A
Dimensions and weights Working range15
16
LONG HVG ES
25° 25° 25°
mm 16 400/18 150 16 400/18 150 16 400/18 150
mm 26 100/27 900 26 100/27 900 26 200/28 000
kg 3300/2500 3300/2500 3300/2500
kg 2500/2000 3000/2500 3000/3500
Undercarriage
Maximum allowable angle from vertical
Maximum Horizontal Reach
Maximum Pin Height
Maximum Tool Weight (over the front)
Maximum Tool Weight (over the side)
Working Range
Specifications – 345C (26/28 m)
* Without tool** May vary depending on the stick and the bucket
LONG HVG ES
mm 17 800 17 800 17 800
mm 3120 3120 3120
mm 3740 3720 3850
mm 2390 2400 2250
mm 2890 3010 2750
mm 740 460 830
kg 57 900/58 200 63 800/64 200 66 700/67 000
kg 55 600 61 400 64 400
Undercarriage
Shipping Length
Boom Height
Cab Height (with FOGS)
Shipping Gauge (retracted position)
Working Gauge (extended position)
Ground Clearance
Machine Weight (UHD configuration) *
Machine Weight (Retrofit Configuration) **
Dimensions and Weights
Engine Cat C13 with ACERT™ Technology
Ratings rpm 1800
Net Power (ISO 9249) kW/hp 239/325
Engine Specs
A
B
C
D
D
E
Dimensions and weights
A
B
C
D
C
E
A
B
B
A
C
0
5
10
15
20
25
m Example: 345C – 26 m version
Working range
17
25°
mm 21 600
mm 33 100
kg 3000
kg 2000
Maximum allowable angle from vertical
Maximum Horizontal Reach
Maximum Pin Height
Maximum Tool Weight (over the front)
Maximum Tool Weight (over the side)
Working Range
Specifications – 365C (33 m)
* Without tool** May vary depending on the stick and the bucket
mm 20 720
mm 4320
mm 3940
mm 2750
mm 3510
mm 890
kg 85 690
kg 82 930
Storage Length
Boom Height
Cab Height (with FOGS)
Shipping Gauge (retracted position)
Working Gauge (extended position)
Ground Clearance
Machine Weight (UHD configuration) *
Machine Weight (Retrofit Configuration) **
Dimensions and Weights
Engine Cat C15 with ACERT™ Technology
Ratings rpm 2000
Net Power (ISO 9249) kW/hp 302/411
Engine Specs
A
B
C
D
D
E
A
B
D
C
E
AC
B
5
10
15
20
25
30
m
Dimensions and weights
A
B
C
Working range
18
40 m
15°
mm 25 200
mm 39 500
kg 2400
kg 2100
UHD Version
Maximum allowable angle from vertical
Maximum Horizontal Reach
Maximum Pin Height
Maximum Tool Weight (over the front)
Maximum Tool Weight (over the side)
Working Range
Specifications – 385C (40 m)
* Without tool** May vary depending on the stick and the bucket
40 m
mm 22 710
mm 8120
mm 3950
mm 2750
mm 3510
mm 890
kg 98 720
kg 93 730
UHD Version
Storage Length
Boom Height
Cab Height (with FOGS)
Shipping Gauge (retracted position)
Working Gauge (extended position)
Ground Clearance
Machine Weight (UHD configuration) *
Machine Weight (Retrofit Configuration) **
Dimensions and Weights
A
B
C
D
D
E
A
C
B
5
10
15
20
25
30
35
40
m
Working range
A
B
C
Engine Cat C18 with ACERT™ Technology
Ratings rpm 1800
Net Power (ISO 9249) kW/hp 390/530
Engine Specs Example: 385C – 40 m version
A
B
D
C
E
Dimensions and weights
Grapples
Quick Couplers
CW-40 CW-40 s CW-45 CW-45 s
275 250 400 365
550 420 690 550
475 475 570 570
150 150 150 150
350 350 350 350
40 40 40 40
Specifications
Weight (kg)
Dimensions B (mm)
L (mm)
Hydraulics Pmin (bar)
Pmax (bar)
Qmax (L/min)
G320B G320
kg 1970* 2060*
Liter 750 900
mm 1540 1505
mm 2200 2265
mm 1100 1394
mm 1725 1850
mm 1630 1690
kN 66 60
l/min 120 100
l/min 40 40
bar 350 350
bar 140 140
Specifications
Weight
Capacity
Dimensions
Length (grapple closed)
Length (grapple open)
Width
Height (grapple closed)
Height (grapple open)
Closing force
Maximum Oil Flow
Hydraulic cylinder
Rotation
Maximum Working Pressure
Hydraulic cylinder
Rotation
Specifications – Work Tools
L
B
* Includes mounting bracket
19
20
S320 S325
kg 2150 3000
mm 3044 3453
mm 1183 1374
mm 390 490
mm 440 570
kN 900 1250
kN 2200 3200
kN 3800 5900
bar 350 350
Specifications
Weight
Dimensions
Length
Height
Jaw opening
Jaw depth
Shear Force
At tip
Primary blade center
At throat
Pmax
Shear Specifications
S320 S325
l/min 150 200
l/min 240 300
sec 4 5
sec 3 3
BSP 1 1
bar 200 200
l/min 200 300
l/min 140 140
l/min 40 40
one one
Specifications
Hydraulic for cutting
Optimum flow
Return flow (opening)
Speed open
Speed close
Connection
Speed valve
Switching pressure
Oil flow (max)
Hydraulic for rotating
Pmax
Optimum flow
Hydromotor
Hydraulic Requirements
Specifications – Work Tools
21
Concrete Cutter Jaws and Shear Jaws
Specifications and Dimensions
MP15 MP20 MP30 MP15 MP20 MP30
kg 2020 2660 3850 1950 2570 3890
kg 640 930 1260 570 840 1300
mm 2200 2400 2800 2100 2250 2700
mm 1510 1750 1980 1310 1510 1680
mm 800 800 1010 800 800 1010
mm 300 360 380 300 320 370
mm 100 130 130 80 100 120
mm 670 820 975 350 420 470
mm 670 790 890 480 580 710
mm 400 460 520 400 520 600
kN 700 950 1250 900 1200 1600
kN 1000 1400 1850 – – – –
kN 2200 3000 4100 2100 2900 3750
kN – – – 4200 5800 7100
– – –
l/min 150 200 300 150 200 30
sec 5 6 6.5 5 6 6.5
l/min 40 40 40 40 40 40
bar 350 350 350 350 350 –
bar 140 140 140 140 140 –
mm 300 400 500 300 400 500
mm 150 180 200 150 180 200
mm 10.7 13.5 16.0 10.7 13.5 16.0
mm 7.1 8.6 10.2 7.1 8.6 10.2
mm 190 250 310 190 250 310
mm 200 260 300 200 260 300
mm 10 12.5 15.5 10 12.5 15.5
mm 6.5 7.5 9.0 6.5 7.5 9.0
mm 65 80 90 65 80 90
mm 60 70 80 60 70 80
Weight total – housing, jaw and bracket
Weight of the jaw
Length
Height
Width
Jaw width (fixed)
Jaw width (moving)
Jaw opening
Jaw depth
Cutter-length
Maximum crushing/shear force
Tooth-jaw tip
Front cutter tip
Primary blade center
At throat
Maximum oil flow
Hydraulic-cylinder
Cycle time (open, close, open)
Rotation
Maximum working pressure
Hydraulic-cylinder
Rotation
Cutting Capacity
Narrow I-beams
Height
Flange width
Flange thickness
Web thickness
Wide I-beams
Height
Flange width
Flange thickness
Web thickness
Solid-round
Solid-square
Concrete Cutter Jaws Shear Jaws
22
Specifications and Dimensions
MP15 MP20 MP30 MP15 MP20 MP30
kg 2220 2900 4180 2010 2660 3860
kg 840 1170 1590 630 930 1270
mm 2200 2350 2770 2200 2325 2800
mm 1510 1750 1980 1590 1775 1980
mm 800 800 1010 800 800 1010
mm 300 360 380 480 540 610
mm 100 130 130 280 340 370
mm 710 850 1050 700 800 960
mm 700 770 920 700 800 940
mm 200 260 260 200 200 250
kN 700 950 1250 650 950 1250
kN 950 1350 1750 900 1300 1550
kN 2100 2750 3950 2100 2750 3950
– – –
l/min 150 200 300 150 200 300
sec 5 6 6.5 5 6 6.5
l/min 40 40 40 40 40 40
bar 350 350 350 350 350 350
bar 140 140 140 140 140 140
Weight – housing, jaw and bracket
Weight of the jaw
Length
Height
Width
Jaw width (fixed)
Jaw width (moving)
Jaw opening
Jaw depth
Cutter-length
Maximum crushing/shear force
Tooth-jaw
At 2nd tooth
Primary blade center
Maximum oil flow
Hydraulic cylinder
Cycle time (open, close, open)
Rotation
Maximum working pressure
Hydraulic cylinder
Rotation
Primary Pulverizer Jaws and Crusher Jaws
Pulverizer Jaws Crusher Jaws
23
Main Standard Equipment
Standard on all Cat UHD Models• Reinforced upper frame and heavier counterweight
• Hydraulically tiltable cab (integrated into the upper frame)
• Purpose-designed demolition cab, with impact-resistant front windshield, large high-resistant upper skylight, and FOGS
• Front windshield and top window wipers
• Boom Hook System with Hydraulic Quick Disconnects (325D, 330D) or face-to-face ball valves (345C, 365C, 385C)
• Tool cylinder protection guard (sliding steel box)
• Dedicated UHD tool linkage
• Boom, stick and tool cylinder lowering control devices with CaterpillarSmartBoom™ system and overload warning device
www.cat.com
© 2007 Caterpillar -- All rights reserved. CAT, CATERPILLAR, their respective logos, ACERT™ and ‘Caterpillar Yellow’, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
HEHH3261-2 (03/2007) hr