GALVANISED & MILD STEEL

METAL LOCKERS

Unit FeaturesSteel Carcass: 18 gauge steel with 20swg inner panelsPanel Finish: Paint finish is either Epoxy or Epoxy/Polyester mix powder coating sprayed electrostatically. Film build is nominally 35-50 microns. All finishes are stoved to the appropriate BS3900 specification.Doors: 18 gauge steel with stiffening rails to ensure integrity. Locks: Cam lock or padlockable locks. Hinges: Designed for 120 degree opening ensuring clear access space for users.Levelling: Floor levelling feet supplied in galvanised steel lockers.Ventilation: Perforated ventilation panels in each unit.

DimensionsHeight: 1800mmWidths: 300mm and 450mmDepths: 300mm and 450mm

AccessoriesSloping tops and cladding panel.

Components1 Door Locker: 1 fixed shelf and 2 coat hooks2 Door Locker: 2 coat hooks per compartment3 Door Locker: Empty compartments4 Door Locker: Empty compartments

DeliveryThese units are delivered pre-assembled.

www.flexiform.co.uk

MaterialsSteel: Powder coated steel with minimum paint coverage thickness of 35 Microns. Indentation, cross cut+adhesion and bend tested. FinishesStandard Flexiform finishes with antibacterial paint. Additional colours available (may incur an upcharge).

Steel: RAL7004 Silver Grey (SGB), RA:5010 Royal Blue (RBB), RAL3001 Chilli Red (CRB), RAL6018 Fern Green (FGB), RAL5015 Sky Blue (SBB)

Recyclable Content98% recyclable.

Warranty15 years from installation.

Tested ToBS 4875-7:2006, BS EN 14074:2004, BS EN 14073-3:2004BS EN 14073-2:2004

Metal Lockers

1 Door 2 Door 3 Door 4 Door