Flexmaster HVAC US Brochure

7/22/2019 Flexmaster HVAC US Brochure

1/12

FLEXMASTERH E A T I N G , V E N T I L A T I O N & A I R C O N D I T I O N I N G

HVAC Products

Triple LockMetal Duct

FabriflexDuct

HVAC Solutions


2/12


Flexmaster has proudly suppliedsuperior HVAC products to theICI construction industry for over35 years. Our extensive range ofspecified product offer numerousvalue-added features & benefits.

Flexmaster combines various patented processes

with numerous unique product characteristics toproduce a wide range of revolutionary ducting andaccessory products.

We are proud of our products and their acceptancein the marketplace. Flexmaster is active in variousindustry associations and programs and dedicatedto enhancing quality standards for the benefit of allindustry participants.

Flexmaster flexible ducting products are UL Approvedas Class 1 Air Duct and have a Flame SpreadRating of not over 25 without evidence of continued

progressive combustion and a Smoke DevelopedRating of not over 50. Thermal resistance R4.2, R6and R8.

All Flexmaster products are warranted to be free from all defects in materialand workmanship. It is impossible to test Flexmaster products under allconditions to which they might be subjected in the field. It is therefore thebuyer and/or end users responsibility to test all Flexmaster products underconditions that duplicate the service conditions prior to installation.

Shipping Terms: F.O.B. Our Warehouses

Due to continuous improvements, all specifications are subject to changewithout prior notice.

Metal non-combustible flexible

duct is ideally suited for a widerange of HVAC applications.

Non-Insulated Pressure Rated10 w.g. positive thru 16 Dia.

6 w.g. positive, 18 Dia.

12 w.g. negative, thru 16 Dia.

4 w.g. negative, 18 Dia.

Rated Velocity5500 F.P.M.

Operating Temperature Range:60F to +600F

Flame/Smoke: 25/50 UL 181 Class 0

Triple Lock Aluminum

Triple Lock Stainless Steel

Non-Insulated Pressure Rated12 w.g. positive (all Dia.)

12 w.g. negative (all Dia.)


Operating Temperature Range: 60F to 1500F


TRIPLE LOCK

1


3/12

T/L-T

T/L-M

T/L-A-T/L

T/L-A

Insulated metal duct with outer

vapor barrier controls vaportransmission and condensation.

Insulated Pressure Rated10 w.g. positive thru 16 Dia.





Vapor Barrier Permeance.05 Perm A.S.T.M. E96, Procedure A

Operating Temperature Range: 20F to +250F


Thermal Resistance: R-4.2, R-6.0, R-8.0

TRIPLE LOCKTHERMAL

FLEX DUCT

A perforated inner-core reduces

noise generated by mechanicalequipment or system vibration.

Insulated Pressure Rated2 w.g. positive thru 16 Dia.1 w.g. negative, 10 Dia.



Operating Temperature Range: 20F to+250FFlame/Smoke 25/50 UL 181 Class 1Thermal Resistance: R-4.2, R-6.0, R-8.0

T/L-AM


TRIPLE LOCKACOUSTIC

FLEX DUCT

www.flexmaster.com







Operating Temperature Range: 20F to +250F

Flame/Smoke 25/50 UL 181 Class 1

Thermal Resistance: R-4.2, R-6.0, R-8.0


2 w.g. negative thru 16 Dia.


Vapor BarrierTriple Lock,Aluminum Jacket

Operating Temperature Range: 20F to+250FFlame/Smoke 25/50 UL 181 Class 1


4/12

Fabriflex Ducting

Fab 3(Non-Insulated)

Fab 3T(Insulated)

Fab 3M(Insulated)

Pressure Rated20 w.g. positive10 w.g. neg thru 12 dia.5 w.g. neg 14 & 16 dia.1 w.g. neg. 18 & 20 dia.


CoreTrilaminate of Aluminum Foil, Fiberglassand Aluminized Polyester

Vapor Barrier Permeance.10 Perm A.S.T.M E96 Procedure A

Connector Rated

Vapor Barrier Permeance.05 Perm A.S.T.M E96 Procedure A

Duct Rated

Fabriflex Ducting


Fab 4T(Insulated)

Fab 4M(Insulated)



CorePVC Coated Fiberglass Cloth

Vapor Barrier Permeance.10 Perm A.S.T.M. Procedure A

Connector Rated

Vapor Barrier Permeance.05 Perm A.S.T.M. E96 Procedure A

Duct Rated


A patented outside mechanical lock provides a positive seal and eliminates the

need for problematic adhesives. Choose a duct to handle internal operatingpressures, provide thermal reliability or meet critical noise criteria levels.

3


5/12

Fabriflex Low Pressure Ducting


Fab 5T(Insulated)

Fab 5M(Insulated)



CoreTrilaminate of Aluminum Foil, Fiberglassand Aluminized Polyester

Vapor Barrier Permeance.10 Perm A.S.T.M. Procedure A

Connector Rated


Duct Rated

Fabriflex Acoustical Ducting


Fab 6T(Insulated)

Fab 6M(Insulated)

Pressure Rated6 w.g. positive5 w.g. neg thru 16 dia.1 w.g. neg. 18 & 20 dia.


CoreSPUNBOND Nylon Fabric

Vapor Barrier Permeance.10 Perm A.S.T.M Procedure A

Connector Rated


Duct Rated

www.flexmaster.com

Flexible ducting connects mixing boxes, light troffers, diffusers, and other

terminals to air distribution systems.


6/12

Encapsulated Flexible Ducting

Fab 97T(Insulated)

Fab 97(Non-Insulated)Material: Metalized PET film

Maximum Rated Velocity:20.3 m/s (4000 fpm)

Maximum Positive Pressure:1.5 kPa (6 in. WC)

Maximum Negative Pressure:0.13 kPa (0.5 in. WC)

Temperature Range: 20F to +250F

Bend Radius: 1 x diameter

Available Sizes: 3 to 16

Standard Lengths: 25ft

Fabriflex Ducting

Encapsulated Fabriflex Ducting


Fab 99T(Insulated)

Fab 8T(Insulated)

Fab 8M(Insulated)

Pressure Rated10 w.g. positive5 w.g. neg thru 16 dia.1 w.g. neg. 18 & 20 dia.


CoreChlorinated Polyethylene(CPE) Fabric

Maximum Rated Velocity:20.3 m/s (4000 fpm)

Maximum Positive Pressure:1.5 kPa (6 in. WC)

Maximum Negative Pressure:0.13 kPa (0.5 in. WC)

Temperature Range: 20F to +250F

Bend Radius: 1 x diameter

Available Sizes: 3 to 16Standard Lengths: 25ft

Vapor Barrier Permeance.10 Perm A.S.T.M Procedure A

TypeConnector


TypeDuct Rated



Our Fabriflex line of flexible ducting products conforms to NFPA standards

90A and 90B; tested in accordance with UL-S110M or UL-181 standardsunder Factory-Made Air Ducts and Air Ducts. Flexible ducts must

be installed in accordance with the conditions of their UL/UL Listings.

5


7/12

Industrial Ducting

U-Lok 440HRMedium gauge silicone coated fiberglass duct. Single-ply economical silicone/fiberglass duct designed forvehicular exhaust extraction and high temperature airtransfer. Ultra flexible mechanical lock constructionprovides superior tear and tensile strength andeliminates wire movements found in traditionalsingle-ply duct. Air tight construction. Uniformflexibility and compressibility reduces exhaustturbulence and pressure loss. High temperatureair supply and removal. Garage fume control.Combustion by-products. For use with hosereels.

Material: Med. gauge silicone coated fiberglassConstruction: Mechanical lock, external steel scuff guardDiameters: 2 to 12

Weight: 6 I.D. = 1.1lbs/ftLength: 25ftCompression Ratio: 5:1Temperature range: -60F to +500F

Color: Orange/red with black external scuff guard

Flame Retardant TPRThis flame retardant welding fume extractionduct and cable cover is designed specifically

for welding environments including sparksand slag.

Material: Flame retardant thermoplastic rubberDiameters: 2 to 12

Weight: 6 = .77 lbs/ftLengths: 25 ft & 50 ft to 8 diam., 25 - 10 and upCompression Ratio: 2:1Temperature range: -40F to +275F, continuous, +300F(intermittent)

Static Dissipating (Urethane)Manufactured using inherently dissipating urethanewith wire helix to allow for safe grounding when

used with metallic fittings. This results in permanentprotection against electrostatic discharge. Thespecial molecular bonded construction generatesless turbulence. Lightweight and extremely flexible,it will perform under the toughest conditions.Excellent flexibility and maximum abrasion resistance.Superior tear resistance and high tensile strength. Clearconstruction for visual monitoring.

Temperature range: 65F to 200FLengths: 25 & 50 ftSizes: 2 to 12(larger diameters available, please contact the factory)Compression ratio: 2:1

Industrial Ducting

Fabric reinforced vinyl coated blower duct,ideal for fresh air supply. Manufacturedwith a molecularly bonded wearstrip forscuff resistance. An economical duct forlarge volume air transfer. This duct isreinforced with a spring steel helix andcovered with a urethane wearstrip.

Material: Polyester single fabric coated with vinyl

Diameters: 6 to 24 I.D. Larger sizes availableBend Radius = 12 diam.= 7

Weight: 6 I.D. = .7 lbs/ft

Length 25ftCompression Ratio: 10:1Temperature Range: 20F to +180F

Vinyl Blower Duct

Unless otherwise designated,the term flexible air duct isused for all ducts classified byUL as either flexible air ducts orflexible air connectors.

These provisions apply to ducts used forindoor comfort heating, ventilating, and airconditioning service. They do not apply toservice for conveying particulates, corrosivefumes and vapors, high temperature airor contaminated atmosphere. Projectspecifications must define specific materials,pressure limits, velocity limits, friction rate,thermal conductivity, acoustical ratings, andother pertinent or relevant attributes.

For complete product line please visit www.flexmaster.com


8/12

Straight Spin-On Collars(1801 & 1802)

Long Body Spin-On Collars(1803 & 1804)

Conical Spin-In Collars(1701 & 1702)

Spin-On Collars c/w Stand-offRegulator (1806)

Assembly comes complete with quality regulator and retractable

spring bearing hardware. Available in diameters ranging from4 to 12; with or without damper. Save approximately 43% oninstallation time over conventional fish-lock collars.

Diameters range from 6 to 20; with or without damper.24 gauge construction. Complete with quality regulator andretractable spring bearing hardware. Extra longbody allows damper blade to be lessobtrusive in linear air stream.1804 s/o comes with identical1802 hardware.Designed for usewith spiral duct.

Conicals average 36% less Static Pressure (SP) drop and 45%

less Total Pressure (TP) drop than conventional spin-on collars.Superior quality and design. Diameters range from 4 to 16;with or without damper.

Complete with 8 body, 1/4 square rod, locking quadrant,heavy duty handle, 1 standoff regulator; with or withoutdamper; in diameters ranging from 6 to 20. Blades arespecially designed for optimum linearbalancing. Recommended forinsulated ductwork.


Flexmaster conical spin collars average 36% less static pressure (SP) drop

and 45% less total pressure (TP) drop than conventional fish-lock collars.

SPIN-ONS

7


9/12

Duct Sealant

Insulation Sleeves Duct Tape

Ductbond is a high velocity duct sealant, tested to ASTM G-21,

with a Rating = 0 (no fungal growth on surface). This UL Listedduct sealant is tested to ASTM E84 and meets NFPA 90A and90B 25/50 requirements.UV Rated, Fire Resistant,water based, non toxic,

VOC Rated and inhibitsmold andmildew growth.

Factory assembled fiberglass inner lining with polyethyleneor Mylar vapor barrier. Standard 1 insulating blanketoffers an R-value of 4.2. Meets guidelines foranti-bacterial and anti- moisture. Available indiameters ranging from 2 to 24.UL Classified as a RegisteredComponent (RC).

Grey vinyl-coated fabric pressure sensitive tapes are availablein 2 widths and 60 yard rolls. Aluminum foil pressure-sensitivetapes are available in 2 widths and 50 yard rolls. Foil tapesare UL Classified with a Flame Spread Rating of 5 anda Smoke Developed Rating of 10.Scrim duct tape (use with ductsealant) is available in 3 widthand 100 yard roll.

For quality job, use our water-based,

mold and mildew resistant, low VOCemitting, UV resistant, High-Velocity

Ductbond Duct Sealant.

www.flexmaster.com

ACCESSORIES


10/12

Spiral Duct

Rectangular Duct & Fittings

Platinum FlowTM

Flat Oval Duct & Fittings


Unique lock-formed seam and consistent calibrated tolerances

combine to produce a superior quality product in a wide rangeof gauges to SMACNA Standards. Spiral duct is availablein Galvanized, Satin Coat, Aluminum, 304/316Stainless Steel, in diameters ranging from 3to 72. Standard length - 10ft.

Also available in double wall,insulated.

Rectangular ductwork is manufactured from an AutomatedDuct Line in 5 or 4 lengths. Duct and fittings are constructedto SMACNA duct standards forhigh, medium, low and negativepressure classes. Ductwork isavailable in T.D.F., S and Drive

and Raw connections along witha variety of material optionswhich include Galvanized, SatinCoat, Stainless Steel, Aluminumand P.V.S. from 26ga to 16ga.

Also available in double wallinsulated.

Innovative self-sealing round duct

system incorporates factoryinstalled EPDM double safegaskets. Designed to exceedSMACNAs duct constructionstandards. Completesystem availablein single wall,double wallinsulatedas well ascustom designcapabilities.

Flexmaster offers quality sheet metal products with distinct advantages and

excellent value intended to improve system performance or enhance overallaesthetics. Our products are manufactured in a wide range of diameters,

gauges and metal alloys suitable for any HVAC application.

SPIRAL DUCT & FITTINGS

Flat Oval ductwork is manufactured from a mechanically lockedspiral seam that is evenly spaced for those tight places. Ductand fittings are constructed to SMACNA duct standards forhigh, medium, low and negative pressure classes. Flat Oval isavailable in slip fit or flange connections along with a varietyof material options which include Galvanized, Satin Coat,

Stainless Steel, Aluminum and P.V.S.from 24ga to 16ga.

Also availablein double wallinsulated.

9


11/12

P.V.S. Under-slab/CorrosiveEnvironment Duct

Silencers

LEED Smart Spiral Elbows

Registers

Feature full radius, 4 to 18 diameters, galvanized

construction with a mechanical 4-ply lock seam construction.Spiral elbows have a low flow resistance and meet SMACNAgauge requirements. Visual continuity with spiral pipe ismaintained. LEED smart spiral elbows have greater structuralintegrity, are cost effective and require no field applied sealant.Manufactured with recyclable material and minimal energyused during fabrication.They are VOC free andhave an indefiniteservice life.

P.V.S. is an engineered Duct system for use as an under-slab

duct or in corrosive environments such as natatoriums. P.V.S is aG90 galvanized sheet bonded on both sides with 4 mil. PolyvinylChloride. P.V.S duct will not rust, chip, crack, peel, corrode, or offgas. Service temperature -40 F to 350F. P.V.S is non-flammableand UL listed as a Class 1 air duct. Full duct systems areprovided in both rectangular andround configurations.

Strategically locate these in-line silencers to eliminate noiseproblems. All silencers come with double-lipped EPDM self-sealing gaskets for easy system integration. Available indiameters from 3 to 50, lengths from 1 ft. to 8 ft., insulationthicknesses from 2 to 6. Insertion loss data and pressure dropinformation available on request.

Consider registers and in-line silencers if you need to eliminate unwanted fan or

duct vibration noise. Flexmaster can supply the Sound Attenuation and InsertionLoss data to assist you in the selection process. Reduce broadband or tonal noise

by lowering dB levels and decreasing the overall NC Rating.

Supply or return RGS-3 register with adjustable double deflectionblade and volume damper mount directly onto spiral duct.Eliminates unsightly rectangular register taps. No leakage;manufactured from heavy gauge galvanized steel; available in21 sizes. Performance data available on request.Drum Louvers also available.

www.flexmaster.com


12/12

Multi-Cut Hole Cutter

Gear Clamps Bridge Clamps

Gripple

Nylon Tensioning Clamps

The Multi-Cut Hole Cutter is ideal for cutting large quantitiesof identical holes ideal for spin-on cut-ins. It can cut perfectholes from 2 to 12 diameter through a wide range ofgauges. It comes with a solid cast aluminum body, adjustablenut & pivot pin, and easy to read scale. Replaceable threefluted cutting bits are available.

Constant tension clampscome with a 5/16 hex slottedhead and 12 wide stainless

steel band. Fully adjustableand ideal for making flexibleduct connections in diametersranging from 2 to 24.Offer maximum strengthand anti-shear protection.Not recommended forunderground applications.

Stainless steel bridge clamps,in comparison to traditionalband clamps provide a

superior seal for both interiorand exterior helix ducting.The flat band clamps snuglyaround the material betweenthe raised helix, assuringa tight seal at the ventingconnection.

Suspend any static load with these quick and versatile cablehangers. Reduces installation time by up to 6 times overconventional threaded rod and hanger strap. UL and CSAListed, SMACNA Verified and Seismic Tested.

Available in five load rated sizes and 5 ft to30 ft lengths.

Complete with 8 body, 1/4 square rod, locking quadrant,heavy duty handle, 1 standoff regulator; with or withoutdamper; in diameters ranging from 6 to 20. Blades

are specially designed for optimum linear balancing.Recommended for insulated ductwork.



ACCESSORIES

U.S.A.20 Commerce Park NorthBedford, NH 03110-6911T 603.669.5136T 1.800.654.5600F 1.888.889.3539

[email protected]

Documents

Flexmaster HVAC US Brochure