FLEXUS 1
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park,
Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039
E. [email protected] W.
www.kempsarchitecturallighting.com
FLEXUS 1 - Flexible LED Lighting
Typical Applications
• Architectural & Commercial Lighting• Landscape &
Exterior Lighting• Facades• Furniture
Features
• High quality uniform light source• Injection moulded• Bend
direction - Horizontal• 90mm bend radius• IP67 as standard• Powered
from one end, both ends
or middle• Environmentally friendly & energyefficient
• UV & Flame resistant• Easy to install
Product Specification
Colours 2500K - 2700K - 3000K - 4000K - 5000K - Red - Blue -
Green - Amber
LED Chip SMD
Binning 3 SDCM
Voltage 24V
Watts p/m 4.5W White - Blue - Green 3.5W Red - Amber
Typical Lumens 120lm White - 80lm Blue - 15lm Green - 45lm Red -
50lm Amber
Min Cutting Length 83.3mm White/Blue/Green - 125mm Red/Amber
Beam Angle 160°
Dimming DALI - 0-10V - DMX - Switched
IP Rating IP67 *
IK Rating IK08
Operating Ambient Temp -20°C - 55°C
Material PVC
Life 50,000hrs
Max Length - 1 feed 20m Red/Amber - 15m White/Green/Blue
* IP68 available - Max 1 mtr wate depth - Prices on request
Technical information FLEXUS 1
FLEXUS 1
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park,
Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039
E. [email protected] W.
www.kempsarchitecturallighting.com
FLEXUS 1 - Flexible LED Lighting
Product Selector: FX1-25K-R80-HB-1EColour 2500K 25K2700K
27K3000K 30K4000K 40K5000K 50KRed REDBlue BLUGreen GREAmber AMB CRI
80 R8090 R90 Bend Direction Horizontal HB Cable Entry 1 End Feed
1E1 Side Feed 1S1 Rear Feed 1R2 End Feed 2E2 Side Feed 2S2 Rear
Feed 2RMiddle M
Fixing Accessories FLEXUS 1
Kemps Code Description
KL-FX1-SLA-2000 SelfLockingAluminiumProfile2000mm
KL-FX1-SLA-1000 SelfLockingAluminiumProfile1000mm
KL-FX1-SLA-0500 SelfLockingAluminiumProfile500mm
KL-FX1-SLA-0035 SelfLockingAluminiumProfile35mm
KL-FX1-WPP-2000 WhitePlasticProfile2000mm
KL-FX1-WPP-1000 WhitePlasticProfile1000mm
KL-FX1-WPP-0500 WhitePlasticProfile500mm
Assembly Details
Additional Information
FX 1
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park,
Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039
E. [email protected] W.
www.kempsarchitecturallighting.com
Rev1-07/17
Please contact our sales team on +44(0)113 263 9039 for further
assistance.
tt t t Flame
t ResistanSo lvent s Resistan
UV Resistan
Sa l wate rRes istan
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
Solvents Resistan
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Salt waterRes istant
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam Angle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protection
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
BendingDiameter
9cm
Beam A ngle160°
Cable Entry Options Min. Bending Dia.of 90mm Horizontal Bend
only
Do Not Twist
FX 1 Section Self-Locking Aluminium pro�le
1E - 1 End Feed1S - 1 Side Feed1R - 1 Rear Feed
Assembly
2E - 2 End Feed2S - 2 Side Feed2R - 2 Rear FeedM - Middle
Feed
M
1S
1E1R
2 S
2 E
2 R
Section Detail
Cable Entry Options Assembly Caution
Additional Information
FLEXUS 1
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park,
Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039
E. [email protected] W.
www.kempsarchitecturallighting.com
Rev2-08/18
Please contact our sales team on +44(0)113 263 9039 for further
assistance. Specifications are subject to change withour prior
notice. Please refer to our website for the most up to date
version.
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
Flame Resistant
Solvents Resistant
UV Resistant
SaltwaterResistant
IK08Protection
BendingDiameter
9cm
Beam Angle160°
FLEXUS 1 - Flexible LED Lighting
1E - 1 End Feed1S - 1 Side Feed1R - 1 Rear Feed
2E - 2 End Feed2S - 2 Side Feed2R - 2 Rear FeedM - Middle
Feed
Section AssemblySelf-Locking Aluminium profile
Cable Entry Options Min. Bending Dia.of 90mmDo Not Twist
Horizontal Bend only
Assembly Details
Additional Information
FX 1
Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park,
Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039
E. [email protected] W.
www.kempsarchitecturallighting.com
Rev1-07/17
Please contact our sales team on +44(0)113 263 9039 for further
assistance.
tt t t Flame
t ResistanSo lvent s Resistan
UV Resistan
Sa l wate rRes istan
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
Solvents Resistan
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Salt waterRes istant
IK 08Protectio n
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
Ben dingDiamete r
9cm
Beam Angle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protection
Ben dingDiamete r
9cm
Beam A ngle160°
Flam e Resistan t
So lvent s Resistan t
UV Resistan t
Sa ltwate rRes istan t
IK 08Protectio n
BendingDiameter
9cm
Beam A ngle160°
Cable Entry Options Min. Bending Dia.of 90mm Horizontal Bend
only
Do Not Twist
FX 1 Section Self-Locking Aluminium pro�le
1E - 1 End Feed1S - 1 Side Feed1R - 1 Rear Feed
Assembly
2E - 2 End Feed2S - 2 Side Feed2R - 2 Rear FeedM - Middle
Feed
M
1S
1E1R
2 S
2 E
2 R
W : www.kempslighting.com - E : [email protected] - T : +44
(0)113 263 9039
Client:
Drawing No. Scale @ A4
Date
Drawn By
DateCopyright in this drawing is the property of Kemps
Architectural Lighting (UK). It must not be reproduced, amended
or
used for the execution of any works whether in conjunction with
the proposed works for which it is prepared orotherwise without the
express consent of Kemps Lighting Ltd. Do not scale from this
drawing.
Engineer
Date
Checked ByJob No.
Title
Status:
DESIGN APPROVAL
SALES MANAGERDATE
Rev
APPROVED FOR PRODUCTION
PROJECT MANAGERDATE
18,0
9,0
R13,1
22,3
12,8
9,0
18,0
22,3
12,8
22,3
13,0
KEMPS
AS MADE
RD KAL-F10 A
FLEXUS 10
JK
05/07/2018 W : www.kempslighting.com - E :
[email protected] - T : +44 (0)113 263 9039
Client:
Drawing No. Scale @ A4
Date
Drawn By
DateCopyright in this drawing is the property of Kemps
Architectural Lighting (UK). It must not be reproduced, amended
or
used for the execution of any works whether in conjunction with
the proposed works for which it is prepared orotherwise without the
express consent of Kemps Lighting Ltd. Do not scale from this
drawing.
Engineer
Date
Checked ByJob No.
Title
Status:
DESIGN APPROVAL
SALES MANAGERDATE
Rev
APPROVED FOR PRODUCTION
PROJECT MANAGERDATE
18,0
9,0
R13,1
22,3
12,8
9,0
18,0
22,3
12,8
22,3
13,0
KEMPS
AS MADE
RD KAL-F10 A
FLEXUS 10
JK
05/07/2018 W : www.kempslighting.com - E :
[email protected] - T : +44 (0)113 263 9039
Client:
Drawing No. Scale @ A4
Date
Drawn By
DateCopyright in this drawing is the property of Kemps
Architectural Lighting (UK). It must not be reproduced, amended
or
used for the execution of any works whether in conjunction with
the proposed works for which it is prepared orotherwise without the
express consent of Kemps Lighting Ltd. Do not scale from this
drawing.
Engineer
Date
Checked ByJob No.
Title
Status:
DESIGN APPROVAL
SALES MANAGERDATE
Rev
APPROVED FOR PRODUCTION
PROJECT MANAGERDATE
18,0
9,0
R13,1
22,3
12,8
9,0
18,0
22,3
12,8
22,3
13,0
KEMPS
AS MADE
RD KAL-F10 A
FLEXUS 10
JK
05/07/2018
