8/13/2019 Flooring Specs
1/4
TECHNO ACESS FLOOR DATA SHEET
Techno-access Cement Filled Panels shall be made from steel. The
bottom of the panel shall be embossed in 64 hemispherical shape of
60mm
dia
Product Picture
PHYSICAL PROPERTIES and FEATURES
Fire proof Widely used in computer rooms Fast and accurate
installation Excellent anti-static performance Can eliminate the
static electricity produced by the
computers when they are working
The stability of the computer will be maintained. Thus thelife
span of the computers will be prolonged
System is Lay In system, It will greatly facilitate the
wholeinstallation
Easy to remove & re-fix since corners are not screwed to
thepedestal head
Special weather coating on back surface of the tiles The panel
sizes are controlled with great precision, which
assures the free interchange of the panels
With convenient wire layout and various outlet boxes, thesystem
can optimize the cabling in computer rooms.
DESCRIPTION
The raised floor system to be installed shall provide a
minimum
finished floor height of 125mm up-to 800mm from the existing
floor level. The system shall provide for suitable pedestal
and
understructure design to withstand various static loads and
rolling
loads subjected to it in an office / DCS / server / Panel etc.,
The
panel should be laminated on the exposed side with Anti
Static
Laminate and PVC beading on all sides of the panel
Category Loose laid
Panel size 600mm square
Core material High density cement filled
panel
Panel construction Galvanized steel encapsulated
cement filled panels.
Panel thickness
(nominal)
System module
FS 800 35mm 360
FS 1000 35mm 450
RS 1200 35mm 560
Construction
These floor panels are based on a 600mm square module. The
Tile
steel shell comprises of top and bottom sheet that is
wrapped
around and laminated with HPL. Top and bottom plates are
mechanical stitched and spot welded with64 hemisphere for
greater strength. Tile cavity is filled with cement, epoxy, fly
ash,
slurry. Top of the tile is laminated with antistatic laminate
and it
is hot pressed . Edges are secured with PVC edge trims.
8/13/2019 Flooring Specs
2/4
TECHNO ACESS FLOOR DATA SHEET
STRUCTURAL PERFORMANCE
Concentrated load Uniformly distributed load
Panel grade Panel type Point load
25mmx25mm squareLight Fs 800 360KG 1080 kg
Medium FS 1000 450KG 1350 kg
Heavy FS 1200 560KG 1680 kg
Technical Details:
1. TILES
Size: 600 x 600 mm Thickness:30/35 mm
2. PEDESTAL
Top plate size: 75 mm x 75 mm x 3 mm Bottom plate size: 100 mm x
100 mm x 2 mm Pipe thickness: 2.5 mm Height:150 to 800 mm
3. STRINGER
Size: 22mm x 26mm x 573mm Thickness: 1.0 mm
Shape: seamless rectangular shape Hole Distance: 550 mm (centre
to centre)
Specification:
1. TILES All steel construction & cavity filled with cement
slurry & epoxy The tile is powder coated Bottom plate is having
64 round embossing with spot welding to weld top & bottom plate
Shall have a maximum flange of 12mm on all four sides (for resting
on stringers) Panels shall rest on the grid formed by the
stringers, which are bolted onto the pedestals
2. PEDESTAL
All steel construction zinc plated Threaded bolt & nut for
levelling adjustment on top & bottom Various heights are
available Pedestal can carry more than 3000 kg axial load without
any deformation
3. STRINGER All steel construction Seamless rectangular
shape
