Florida Department of Education - Gold Standard Pathways ...Florida Department of Education Careerand Adult Education 325West Gaines Street Tallahassee, FL 32399‐0400 Rule 6A‐10.0401

Gold Standard Career Pathways Articulation Agreements of Industry Certification to AAS/AS

Degree 2015‐2016 Academic Year

Florida Department of Education Career and Adult Education 325 West Gaines Street

Tallahassee, FL 32399‐0400

Rule 6A‐10.0401

Florida Department of Education Statewide Articulation Agreement

Industry Certification to AAS/AS Degree Program

AAS/AS Degree Name: Criminal Justice Technology (60)

CIP Number(s): AAS: * AS: 1743010302*

Industry Certification: 911 Public Safety Telecommunicator Code: FDMQA030

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward

the above AAS/AS program is _3_ hours of credit. This agreement does not

preclude the awarding of additional credits by any college through local

agreements.

Validation Mechanism:

To be eligible for articulation, the student must show evidence of their 911 Public Safety

Telecommunicator certification and it must have been issued within three (3) years prior to their

enrollment in the program.

Rationale/Justification:

The 911 Public Safety Telecommunicator certification represents industry acknowledgement of

technical skill attainment of competencies in the Criminal Justice (60) Program .

Applicability:

State college administrators statewide were consulted and agreed that the “911 Public Safety

Telecommunicator” shall articulate three (3) college credit hours to the AAS/AS Degree in Criminal

Justice Technology (60).

Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree.

Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status

December 31, 2015 Approved

*Certain programs may not have an AS/AAS degree available.

1



AAS/AS Degree Name: Office Administration

CIP Number(s): AAS: 0552020400* AS: 1552020400*

Industry Certification: Accredited Legal Secretary (ALS) Code: TAFLP001

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement

guarantees the minimum award of course credits or a block of credit toward

the above AAS/AS program is 3 hours of credit. This agreement does not


agreements.


To be eligible for articulation, the student must show evidence of their current Accredited Legal

Secretary (ALS) certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Accredited Legal Secretary (ALS) certification represents industry acknowledgement of technical

skill attainment of competencies in the Office Administration program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Accredited Legal

Secretary (ALS)” shall articulate three (3) college credit hours to the AAS/AS Degree in Office

Administration.



05/26/2010 Approved 06/15/2010 Approved


2



AAS/AS Degree Name: Architectural Design and Construction Technology


Industry Certification: ADDA Apprentice Drafter (AD) Code: AMDDA001





agreements.


To be eligible for articulation, the student must show evidence of their ADDA Apprentice Drafter (AD)

certification and it must have been issued within three (3) years prior to their enrollment in the program.


The ADDA Apprentice Drafter (AD) certification represents industry acknowledgement of technical skill

attainment of competencies in the Architectural Design and Construction Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “ADDA Apprentice

Drafter (AD) Certification” shall articulate three (3) college credit hours to the AAS/AS Degree in

Architectural Design and Construction Technology.

Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and

the following College Credit Certificate (CCC) program: Drafting Design (0615130101).




3



AAS/AS Degree Name: Drafting and Design Technology

CIP Number(s): AAS: 0615130102* AS: 1615130102

Industry Certification: ADDA Apprentice Drafter (AD) Code: AMDDA001

College Credit: The minimum award of course credits or a block of credit toward the above

AAS/AS program is _3_ hours of credit. This agreement does not preclude

the awarding of additional credits by any college through local agreements.


To be eligible for articulation, the student must show evidence of their ADDA Apprentice Drafter (AD)



The ADDA Apprentice Drafter (AD) certification represents industry acknowledgement of technical skill

attainment of competencies in the Drafting and Design Technology program.

Applicability:

Community college administrators statewide were consulted and agreed that the “ADDA Apprentice

Drafter (AD) Certification” shall articulate three (3) college credit hours to the AAS/AS Degree in

Drafting and Design Technology.






4



AAS/AS Degree Name: Internet Services Technology


Industry Certification: Adobe Certified Associate (Dreamweaver) Code: ADOBE010





agreements.


To be eligible for articulation, the student must show evidence of their current Adobe Certified Associate

(Dreamweaver) certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Adobe Certified Associate (Dreamweaver) certification represents industry acknowledgement of

technical skill attainment of competencies in the Internet Services Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Adobe Certified

Associate (Dreamweaver)” shall articulate three (3) college credit hours to the AAS/AS Degree in

Internet Services Technology.


the following College Credit Certificate (CCC) program: Web Development Specialist (0511080103).




5



AAS/AS Degree Name: Internet Services Technology

CIP Number(s): AAS: 0511080102* AS: 1511080102

Industry Certification: Adobe Certified Associate (Flash) Code: ADOBE011





agreements.


To be eligible for articulation, the student must show evidence of their current Adobe Certified Associate

(Flash) certification and it must have been issued within three (3) years prior to their enrollment in the

program.


The Adobe Certified Associate (Flash) certification represents industry acknowledgement of technical

skill attainment of competencies in the Internet Services Technology program.

Applicability:

State college administrators statewide were consulted and agreed that the “Adobe Certified

Associate (Flash)” shall articulate three (3) college credit hours to the AAS/AS Degree in Internet

Services Technology.


the following College Credit Certificate (CCC) program: Web Development Specialist (0511080103).




6

Florida Department of Education

Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program

AAS/AS Degree Agriculture Production Technology


Industry Agriculture Technician Certification Code: FLFBR001

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward the

above AS program is _2_ hours of credit. This agreement does not preclude the

awarding of additional credits by any college through local agreements.


To be eligible for articulation, the student must show evidence of their Agriculture Technician

Certification and it must have been issued within three (3) years prior to their enrollment in the program.


The Agriculture Technician Certification represents industry acknowledgement of technical skill

attainment of competencies in the Agriculture Production Technology Program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Agriculture Technician

Certification” shall articulate two (2) college credit hours to the AS Degree in Agriculture Production

Technology.

Articulated credit awarded under this agreement may only be applied to the above AS/AAS Degree.

Programs.

Date Presented to ACC Recommendation Date Submitted SBE Status


* Certain programs may not have an AS/AAS degree available.

7



AAS/AS DegreeName: Air Conditioning, Refrigeration, Heating Systems Technology

CIP Number(s): AAS: 0615050100 AS: *

Industry Certification: Air Conditioning Installation Specialization Code: NATEX002

CollegeCredit: This Gold Standard Career Pathways Statewide Articulation Agreement




agreements.


To be eligible for articulation, the student must show evidence of their current Air Conditioning

Installation Specialization certification and it must have been issued within three (3) years prior to

their enrollment in the program.


The Air Conditioning Installation Specialization certification represents industry acknowledgement of

technical skill attainment of competencies in the Air Conditioning, Refrigeration, Heating Systems

Technology program.

Applicability:

Statecollege administrators (statewide) were consulted and agreed that the “Air Conditioning

Installation Specialization” shall articulate four (4) college credit hours to the AAS/AS Degree in

Air Conditioning, Refrigeration, Heating Systems Technology.


the following College Credit Certificate (CCC) programs: Residential Air Conditioning, Refrigeration, &

Heating Systems Assistant (0615050101) and Residential Air Conditioning, Refrigeration, & Heating

SystemsTechnician(0615050102).

Date Presented to ACC ACCRecommendation Date Submitted toSBE SBE Status

12/31/2015 Approved


8



AAS/AS Degree Name: Air Conditioning, Refrigeration, Heating System Technology


Industry Certification: Air Conditioning Service Technician Code: NATEX001





agreements.


To be eligible for articulation, the student must show evidence of their current Air Conditioning Service

Technician certification and it must have been issued within three (3) years prior to their enrollment in

the program.


The Air Conditioning Service Technician certification represents industry acknowledgement of technical

skill attainment of competencies in the Air Conditioning, Refrigeration, Heating System Technology

program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Air Conditioning

Service Technician” shall articulate three (3) college credit hours to the AAS/AS Degree in Air

Conditioning,Refrigeration,Heating SystemTechnology.




Systems Technician (0615050102).




9



AAS/AS DegreeName: Air Conditioning, Refrigeration, Heating Systems Technology

CIP Number(s): AAS: 0615050100* AS: *

Industry Certification: Air to Air Heat Pump Installation Technician Code: NATEX003





agreements.


To be eligible for articulation, the student must show evidence of their current Air to Air Heat Pump

Installation Technician certification and it must have been issued within three (3) years prior to their



The Air to Air Heat Pump Installation Technician certification represents industry acknowledgement of

technical skill attainment of competencies in the Air Conditioning, Refrigeration, Heating Systems

Technology program.

Applicability:

Statecollege administrators (statewide) were consulted and agreed that the “Air to Air Heat Pump

Installation Technician” shall articulate four (4) college credit hours to the AAS/AS Degree in Air

Conditioning, Refrigeration, Heating Systems Technology.




SystemsTechnician(0615050102).


12/31/2015 Approved


10



AAS/AS DegreeName: Agribusiness Management


Industry Certification: Animal Science Certification Code: FLFBR005





agreements.


To be eligible for articulation, the student must show evidence of their current Animal Science

Certification and it must have been issued within three (3) years prior to their enrollment in the program.


The Animal Science Certification represents industry acknowledgement of technical skill attainment

of competencies in the Agribusiness Management program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Animal Science

Certification” shall articulate three (3) college credit hours to the AAS/AS Degree in Agribusiness

Management.



12/31/2015 Approved


11



AAS/AS DegreeName: Digital Television/Media Production (60)


Industry Certification: Apple Certified Pro (ACP) – Final Cut Pro X Code: APPLE020





agreements.


To be eligible for articulation, the student must show evidence of their current Apple Certified Pro

(ACP) – Final Cut Pro X certification and it must have been issued within three (3) years prior to their



The Apple Certified Pro (ACP) – Final Cut Pro X certification represents industry acknowledgement of

technical skill attainment of competencies in the Digital Television/Media Production (60) program.

Applicability:

Statecollege administrators (statewide) were consulted and agreed that the “Apple Certified Pro

(ACP) – Final Cut Pro X” shall articulate three (3) college credit hours to the AAS/AS Degree in

Digital Television/Media Production (60).



12/31/2015 Approved


12



AAS/AS DegreeName: Radio and TV Broadcast Programming


Industry Certification: Apple Certified Pro (ACP) – Final Cut Pro X Code: APPLE020





agreements.


To be eligible for articulation, the student must show evidence of their current Apple Certified Pro

(ACP) – Final Cut Pro X certification and it must have been issued within three (3) years prior to their



The Apple Certified Pro (ACP) – Final Cut Pro X certification represents industry acknowledgement of

technical skill attainment of competencies in the Radio and TV Broadcast Programming program.

Applicability:

Statecollege administrators (statewide) were consulted and agreed that the “Apple Certified Pro

(ACP) – Final Cut Pro X” shall articulate eight (8) college credit hours to the AAS/AS Degree in

Radio and TV Broadcast Programming.



12/31/2015 Approved


13



AAS/AS Degree Name: Networking Systems Technology (60)


Industry Certification: Apple Certified Support Professional Code: APPLE019




agreements.


To be eligible for articulation, the student must show evidence of their Apple Certified Support

Professional certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Apple Certified Support Professional certification represents industry acknowledgement of

technical skill attainment of competencies in the Networking Systems Technology (60) program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Apple Certified Support

Professional“ shall articulate two (2) college credit hours to the AAS/AS Degree in Network Systems

Technology (60).

Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree


12/31/2015 Approved


14



AAS/AS Degree Name: Networking Systems Technology (60)


Industry Certification: Apple Certified Technical Coordinator Code: APPLE002




agreements.


To be eligible for articulation, the student must show evidence of their Apple Certified Technical

Coordinator certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Apple Certified Technical Coordinator certification represents industry acknowledgement of

technical skill attainment of competencies in the Networking Systems Technology (60) program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Apple Certified

Technical Coordinator“ shall articulate two (2) college credit hours to the AAS/AS Degree in

Network Systems Technology (60).

Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree


12/31/2015 Approved


15



AAS/AS Degree Name: Automotive Service Management Technology


Industry Certification: ASE Auto/Light Truck Tech: Engine Repair (A1) Code: NIASE010

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward the above AAS/AS program is 3 hours of credit. This agreement does not preclude the awarding of additional credits by any college through local agreements.


To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Engine Repair (A1) certification and it must have been issued within three (3) years prior to their



The ASE Auto/Light Truck Tech: Engine Repair (A1) certification represents industry acknowledgement of technical skill attainment of competencies comprising outcome 09.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Engine Repair (A1)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





16





Industry Certification: ASE Auto/Light Truck Tech: Automatic Transmission/Transaxle(A2)

Code: NIASE005



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Automatic Transmission/Transaxle (A2) certification and it must have been issued within three

(3) years prior to their enrollment in the program.


The ASE Auto/Light Truck Tech: Automatic Transmission/Transaxle (A2) certification represents

industry acknowledgement of technical skill attainment of competencies comprising outcome 07.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators statewide were consulted and agreed the “Auto/Light Truck Tech: Automatic Transmission/Transaxle (A2)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





17





Industry Certification: ASE Auto/Light Truck Tech: Manual Drive Train and Axles (A3)

Code: NIASE012



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Manual Drive Train and Axles (A3) certification and it must have been issued within three (3)

years prior to their enrollment in the program.


The ASE Auto/Light Truck Tech: Manual Drive Train and Axles (A3) certification represents industry

acknowledgement of technical skill attainment of competencies comprising outcome 08.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

Community college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Manual Drive Train and Axles (A3)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





18





Industry Certification: ASE Auto/Light Truck Tech: Steering and Suspension (A4)

Code: NIASE014



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Steering and Suspension (A4) certification and it must have been issued within three (3) years

prior to their enrollment in the program.


The ASE Auto/Light Truck Tech: Steering and Suspension (A4) certification represents industry

acknowledgement of technical skill attainment of competencies comprising outcome 03.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Steering and Suspension (A4)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





19





Industry Certification: ASE Auto/Light Truck Tech: Brakes (A5) Code: NIASE007



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Brakes (A5) certification and it must have been issued within three (3) years prior to their



The ASE Auto/Light Truck Tech: Brakes (A5) certification represents industry acknowledgement of technical skill attainment of competencies comprising outcome 04.0 of the Automotive Service Management Technology AAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators statewide were consulted and agreed the “Auto/Light Truck Tech: Brakes (A5)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





20





Industry Certification: ASE Auto/Light Truck Tech: Electrical/Electronic Systems (A6)

Code: NIASE008



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Electrical/Electronic Systems (A6) certification and it must have been issued within three (3)

years prior to their enrollment in the program.


The ASE Auto/Light Truck Tech: Electrical/Electronic Systems (A6) certification represents industry acknowledgement of technical skill attainment of competencies comprising outcome 02.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Electrical/Electronic Systems (A6)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





21





Industry Certification: ASE Auto/Light Truck Tech: Heating and Air Conditioning (A7)

Code: NIASE011



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Heating and Air Conditioning (A7) certification and it must have been issued within three (3) years prior to their enrollment in the program.


The ASE Auto/Light Truck Tech: Heating and Air Conditioning (A7) certification represents industry acknowledgement of technical skill attainment of competencies comprising outcome 05.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Heating and Air Conditioning (A7)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.




*Certain programs may not have an AS/AAS degree.

22





Industry Certification: ASE Auto/Light Truck Tech: Engine Performance (A8)

Code: NIASE009



To be eligible for articulation, the student must show evidence of their current ASE Auto/Light Truck Tech: Engine Performance (A8) certification and it must have been issued within three (3) years prior to



The ASE Auto/Light Truck Tech: Engine Performance (A8) certification represents industry acknowledgement of technical skill attainment of competencies comprising outcome 06.0 of the Automotive Service Management TechnologyAAS/AS (0615080300/1615080300) program.

Applicability:

State college administrators (statewide) were consulted and agreed the “Auto/Light Truck Tech: Engine Performance (A8)” certification from the National Institute for Automotive Service Excellence shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





23





Industry Certification: ASE Auto Maintenance and Light Repair (G1) Code: NIASE076

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward the above AAS/AS program is 3 hours of credit. This agreement does not preclude the awarding of additional credits by any college through localagreements.


To be eligible for articulation, the student must show evidence of their current ASE Auto Maintenance and Light Repair (G1) certification and it must have been issued within three (3) years prior to their enrollment in the program.


The ASE Auto Maintenance and Light Repair (G1) certification represents industry

acknowledgement of technical skill attainment of competencies in the Automotive Service Management Technology program.

Applicability:

Statecollege administrators (statewide) were consulted and agreed the ASE Auto Maintenance and Light Repair (G1) certification shall articulate three (3) college credit hours to the AAS/AS Degree in Automotive Service Management Technology.





24





Industry Certification: Autodesk Certified Associate - AutoCAD Code: ADESK016





agreements.


To be eligible for articulation, the student must show evidence of their Autodesk Associate - AutoCAD



The Autodesk Associate - AutoCAD certification represents industry acknowledgement of technical skill

attainment of competencies in the Drafting and Design Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Autodesk Certified

Associate - AutoCAD” shall articulate three (3) college credit hours to the AAS/AS Degree in Drafting

and DesignTechnology.


the following College Credit Certificate (CCC) programs: AutoCAD Foundations (0615130204) and Fire

Sprinkler Design Technology (0615130105).




25



AAS/AS Degree Name:

Architectural Design and Construction Technology


Industry Certification:

Autodesk Certified Associate - AutoCAD Architecture Code: ADESK017

College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees

the minimum award of course credits or a block of credit toward the above AAS/AS

program is _3_ hours of credit. This agreement does not preclude the awarding of

additional credits by any college through local agreements.


To be eligible for articulation, the student must show evidence of their Associate - AutoCAD Architecture



The Associate - AutoCAD Architecture certification represents industry acknowledgement of technical

skill attainment of competencies in the Architectural Design and Construction Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Associate -

AutoCAD Architecture” shall articulate three (3) college credit hours to the AAS/AS Degree in




Date Presented to ACC

ACC Recommendation Date Submitted to SBE

SBE Status



26





Industry Certification: Autodesk Certified Associate - AutoCAD Architecture

Code: ADESK017





agreements.


To be eligible for articulation, the student must show evidence of their Associate - AutoCAD Architecture



The Associate - AutoCAD Architecture certification represents industry acknowledgement of technical

skill attainment of competencies in the Drafting and Design Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Associate -

AutoCAD Architecture” shall articulate three (3) college credit hours to the AAS/AS Degree in




Sprinkler Design Technology (0615130105).




27



AAS/AS Degree Name: Civil Engineering Technology


Industry Certification: Autodesk Certified Associate - AutoCAD Civil 3D Code: ADESK018





agreements.


To be eligible for articulation, the student must show evidence of their current Autodesk Certified

Associate (AutoCAD Civil 3D) certification and it must have been issued within three (3) years prior to



The Autodesk Certified Associate (AutoCAD Civil 3D) certification represents industry acknowledgement

of technical skill attainment of competencies in the Civil Engineering Technology program.

Applicability:

Community college administrators statewide were consulted and agreed that the “Autodesk Certified

Associate (AutoCAD Civil 3D)” shall articulate three (3) college credit hours to the AAS/AS Degree in

CivilEngineeringTechnology.





28

Florida Department ofEducation Statewide Articulation Agreement




Industry Certification: Autodesk Certified Associate (Revit Architecture) Code: ADESK020





agreements.



Associate (Revit Architecture) certification and it must have been issued within three (3) years prior to



The Autodesk Certified Associate (Revit Architecture) certification represents industry acknowledgement

of technical skill attainment of competencies in the Architectural Design and Construction Technology

program.

Applicability:


Associate (Revit Architecture)” shall articulate three (3) college credit hours to the AAS/AS Degree in


Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Credit Certificate (CCC) programs: Drafting Design (0615130101) and Sustainable Design (0630330106).




29





Industry Certification: Autodesk Certified Professional (AutoCAD) Code: ADESK021


AAS/AS program is 3 hours of credit. This agreement does not preclude the




Professional (AutoCAD) certification and it must have been issued within three (3) years prior to their



The Autodesk Certified Professional (AutoCAD) certification represents industry acknowledgement of

technical skill attainment of competencies in the Drafting and Design Technology program.

Applicability:


Professional (AutoCAD)” shall articulate three (3) college credit hours to the AAS/AS Degree in




Sprinkler Design Technology (0615130105)




30





Industry Certification: Autodesk Certified Professional (AutoCAD Architecture)

Code: ADESK022


AAS/AS program is 3 hours of credit. This agreement does not preclude the




Professional (AutoCAD Architecture) certification and it must have been issued within three (3) years

prior to their enrollment in the program.


The Autodesk Certified Professional (AutoCAD Architecture) certification represents industry

acknowledgement of technical skill attainment of competencies in the Architectural Design and

Construction Technologyprogram.

Applicability:


Professional (AutoCAD Architecture)” shall articulate three (3) college credit hours to the AAS/AS

Degree in Architectural Design and Construction Technology.


the following College Credit Certificate (CCC) programs: Drafting Design (0615130101) and Sustainable

Design (0630330106).




31



AAS/AS Degree Name: Civil Engineering Technology


Industry Certification: Autodesk Certified Professional (AutoCAD Civil 3D) Code: ADESK023





agreements.



Professional (AutoCAD Civil 3D) certification and it must have been issued within three (3) years prior to



The Autodesk Certified Professional (AutoCAD Civil 3D) certification represents industry

acknowledgement of technical skill attainment of competencies in the Civil Engineering Technology

program.

Applicability:


Professional (AutoCAD Civil 3D)” shall articulate three (3) college credit hours to the AAS/AS Degree

in Civil Engineering Technology.





32



AAS/AS Degree Name: Engineering Technology


Industry Certification: Autodesk Certified Professional(Inventor) Code: ADESK024





agreements.



Professional (Inventor) certification and it must have been issued within three (3) years prior to their

enrollment in theprogram.


The Autodesk Certified Professional (Inventor) certification represents industry acknowledgement of

technical skill attainment of competencies in the Engineering Technology program.

Applicability:


Professional (Inventor)” shall articulate three (3) college credit hours to the AAS/AS Degree in

EngineeringTechnology.


the following College Credit Certificate (CCC) programs: Computer-Aided Design and Drafting

(0615130304); ComputerizedWoodworking (0615080501); and CNC Machinist (0648051002).




33





Industry Certification: Autodesk Certified Professional (Revit Architecture) Code: ADESK025





agreements.



Professional (Revit Architecture) certification and it must have been issued within three (3) years prior to



The Autodesk Certified Professional (Revit Architecture) certification represents industry

acknowledgement of technical skill attainment of competencies in the Architectural Design and

Construction Technology program.

Applicability:


Professional (Revit Architecture)” shall articulate three (3) college credit hours to the AAS/AS Degree

in Architectural Design and Construction Technology.


the following College Credit Certificate (CCC) programs: Drafting Design (0615130101) and

Sustainable Design (0630330106).




34





Industry Certification: Autodesk Certified User –AutoCAD Code: ADESK002


guarantees the minimum award of course credits or a block of credit

toward the above AAS/AS program is 3 hours of credit.

This agreement does not preclude the awarding of additional credits by

any college through local agreements.


To be eligible for articulation, the student must show evidence of their current Autodesk Certified User –

AutoCAD certification and it must have been issued within three (3) years prior to their enrollment in the

program.


The Autodesk Certified User – AutoCAD certification represents industry acknowledgement of technical

skill attainment of competencies in the Drafting and Design Technology program.

Applicability:

State college administrators (statewide), program deans and faculty from Florida’s Biotechnology programs

were consulted and agreed that the “Autodesk Certified User – AutoCAD” certification shall articulate three

(3) college credit hours the AAS/AS Degree in Drafting and Design Technology.


December 8, 2011 Approved January 24, 2012 Approved


35





Industry Certification: Autodesk Certified User - AutoCAD Code: ADESK002







To be eligible for articulation, the student must show evidence of their current Autodesk Certified User -

AutoCAD certification and it must have been issued within three (3) years prior to their enrollment in the

program.


The Autodesk Certified User - AutoCAD certification represents industry acknowledgement of technical

skill attainment of competencies in the Architectural Design and Construction Technology program.

Applicability:

Florida College System institution administrators, program deans and faculty were consulted and agreed

that the “Autodesk Certified User - AutoCAD” certification shall articulate three (3) college credit hours the

AAS/AS Degree in Architectural Design and Construction Technology.




36



AAS/AS Degree Name: Engineering Technology


Industry Certification: Autodesk Certified User – Autodesk Inventor Code: ADESK011








Autodesk Inventor certification and it must have been issued within three (3) years prior to their



The Autodesk Certified User – Autodesk Inventor certification represents industry acknowledgement of

technical skill attainment of competencies in the Engineering Technology program.

Applicability:


that the “Autodesk Certified User – Autodesk Inventor” certification shall articulate three (3) college credit

hours to the AAS/AS Degree in Engineering Technology.




37





Industry Certification: Autodesk Certified User - Revit Architecture Code: ADESK008







To be eligible for articulation, the student must show evidence of their current Autodesk Certified User -

Revit Architecture certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Autodesk Certified User - Revit Architecture certification represents industry acknowledgement of

technical skill attainment of competencies in the Architectural Design and Construction Technology

program.

Applicability:


that the Autodesk Certified User - Revit Architecture certification shall articulate three (3) college credit

hours to the AAS/AS Degree in Architectural Design and Construction Technology.




38



AAS/AS Degree Name: Building Construction Technology


AAS/AS Degree Name: Building Construction Technology (60)

CIP Number(s): AAS: AS: 1615100102*

Industry Certification: Autodesk Certified User – Revit Architecture Code: ADESK008





agreements.



Revit Architecture certification and it must have been issued within three (3) years prior to their



The Autodesk Certified User – Revit Architecture certification represents industry acknowledgement of

technical skill attainment of competencies in the Building Construction Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the Autodesk Certified User – Revit Architecture shall articulate three (3) college credit hours to the AAS/AS Degree in Building

Construction Technology/ Building Construction Technology (60).


the following College Completion Certificate (CCC) programs: Building Construction Specialist

(0615100103).




39





Industry Certification: Autodesk Certified User – Revit Architecture Code: ADESK008








Revit Architecture certification and it must have been issued within three (3) years prior to their enrollment

in the program.


The Autodesk Certified User – Revit Architecture certification represents industry acknowledgement of

technical skill attainment of competencies in the Drafting and Design Technology program.

Applicability:

State college administrators (statewide), program deans and faculty were consulted and agreed that the

Autodesk Certified User- Revit Architecture certification shall articulate three (3) college credit hours to

the AAS/AS Degree in Drafting and Design Technology.




40



AAS/AS Degree Name: Biotechnology


Industry Certification: Biotechnician Assistant Code: CERHB001







To be eligible for articulation, the student must show evidence of their current Biotechnician Assistant



The Biotechnician Assistant certification represents industryacknowledgement of technical skill

attainment of competencies in the Biotechnology program.

Applicability:


that the “Biotechnician Assistant” certification shall articulate three (3) college credit hours the AAS/AS

Degree in Biotechnology.




41



AAS/AS Degree Name: Biotechnology Laboratory Technology


Industry Certification: Biotechnician Assistant Code: CERHB001







To be eligible for articulation, the student must show evidence of their current Biotechnician Assistant



The Biotechnician Assistant certification represents industryacknowledgement of technical skill

attainment of competencies in the Biotechnology Laboratory Technology program.

Applicability:


that the “Biotechnician Assistant” certification shall articulate three (3) college credit hours the AAS/AS

Degree in Biotechnology Laboratory Technology.




42

Florida Department of Education

Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program

AAS/AS Degree Name: Architectural Design and Construction


Industry Certification: Certified Apprentice Drafter-Architectural Code: AMDDA002


the above AS program is _3_ hours of credit. This agreement does not


agreements.


To be eligible for articulation, the student must show evidence of their Certified Apprentice Drafter-

Architectural certification and it must have been issued within three (3) years prior to their enrollment in

the program.


The Certified Apprentice Drafter- Architectural certification represents industry acknowledgement of

technical skill attainment of competencies in the Architectural Design and Construction Program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Certified Apprentice

Drafter- Architectural” shall articulate three (3) college credit hours to the AS Degree in Architectural

Design and Construction.

Articulated credit awarded under this agreement may only be applied to the above AS/AAS Degree and

the following College Credit Certificate (CCC) program: Sustainable Design (0630330106).




43



AAS/AS Degree Name: Accounting Technology


Industry Certification: Certified Bookkeeper Code: AIOPB001





agreements.


To be eligible for articulation, the student must show evidence of their current Certified Bookkeeper



The Certified Bookkeeper certification represents industryacknowledgement of technical skill attainment

of competencies in the Accounting Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Certified

Bookkeeper” shall articulate three (3) college credit hours to the AAS/AS Degree in Accounting

Technology.


the following College Credit Certificate (CCC) programs: Accounting Technology Management

(0552030205); Accounting Technology Operations (0552030203), and Accounting Technology

Specialist (0552030204).




44



AAS/AS Degree Name: Culinary Management


Industry Certification: Certified Culinarian Code: ACFED002





agreements.


To be eligible for articulation, the student must show evidence of their Certified Culinarian certification

and it must have been issued within three (3) years prior to their enrollment in the program.


The Certified Culinarian certification represents industry acknowledgement of technical skill attainment

of competencies in the Culinary Management program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Certified Culinarian”

shall articulate three (3) college credit hours to the AAS/AS Degree in Culinary Management.


the following College Credit Certificate (CCC) program: Culinary Arts (0612050301).




45



AAS/AS Degree Name: Restaurant Management


Industry Certification: Certified Culinarian Code: ACFED002





agreements.


To be eligible for articulation, the student must show evidence of their Certified Culinarian certification

and it must have been issued within three (3) years prior to their enrollment in the program.


The Certified Culinarian certification represents industry acknowledgement of technical skill attainment

of competencies in the Restaurant Management program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Certified Culinarian”

shall articulate six (6) college credit hours to the AAS/AS Degree in Restaurant Management.





46



AAS/AS Degree Name: Dental Assisting Technology and Management


Industry Certification: Certified Dental Assistant (CDA) Code: DANBD001







To be eligible for articulation, the student must show evidence of their current Dental Assisting

Technology and Management certification and it must have been issued within three (3) years prior to



The Certified Dental Assistant (CDA) certification represents industry acknowledgement of technical skill

attainment of competencies in the Dental Assisting Technology and Management program.

Applicability:


that the “Certified Dental Assistant (CDA)” certification shall articulate five (5) college credit hours the

AAS/AS Degree in Dental Assisting Technology and Management.




47



AAS/AS Degree Name: Electronics Engineering Technology


Industry Certification: Certified Electronic Technician Code: ISCET001


AAS/AS program is _6_ hours of credit. This agreement does not preclude

the awarding of additional credits by any college through local agreements.


To be eligible for articulation, the student must show evidence of their Certified Electronic Technician



The Certified Electronic Technician certification represents industry acknowledgement of technical skill

attainment of competencies in the Electronics Engineering Technology program.

Applicability:

State college administrators (statewide) were consulted and agreed that the “Certified

Electronic Technician” shall articulate six (6) college credit hours to the AAS/AS Degree in

Electronics Engineering Technology.


the following College Credit Certificate (CCC) programs: Basic Electronics Technician (0615030310),

Electronics Technician (0615030309), Laser and Photonics Technician (0615030411), and Robotics and

SimulationTechnician(0615040514).




48



AAS/AS DegreeName: Bakery and Pastry Management (60)


Industry Certification: Certified Food Safety Manager Code: NRFSP001


guarantees the minimum award of course credits or a b

Documents

Florida Department of Education - Gold Standard Pathways ...Florida Department of Education Careerand Adult Education 325West Gaines Street Tallahassee, FL 32399‐0400 Rule 6A‐10.0401