Flotation machine china

8/7/2019 Flotation machine china

1/5

Gongyi Hengchang Metallurgical Building

Materials Equipment Plant

Address: Guangling east road, Gongyi City, Henan, China

Tel: 0086-371-86106152 Fax: 0086-371-86106152

http://www.chinahengchang.com http://hcmining.en.alibaba.com

Contact:Zhigang Li Email:[email protected] MP:0086-15936205163

Flotation machine

Flotation machine is applicable for

the separation of nonferrous metal

and ferrous metals, such as fluorite

and talc. The impeller is driven by

V-belts, which can bring the

centrifugal effect to form negative

pressure. While extractingsufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it

with chemicals to form mineralized froth. By adjusting the height of the flash board to control the

liquid level, the useful froth can be scraped from the loam board. The height of the strobe must be

adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the

launder. The impellers and stators should be kept at a distance and should be changed when worn.

The bearing in the pump should be maintained every three months.

Floatation machine working principle:

When the floatation machine works, the motor drives the impeller to revolve, so the centrifugal

effect and negative pressure are produced. On one hand, ample air is absorbed and mixed with

mineral slurry, on the other hand, the mixed mineral slurry is mingled with additive, meanwhile,
http://www.chinahengchang.com/http://hcmining.en.alibaba.com/mailto:[email protected]:[email protected]://hcmining.en.alibaba.com/http://www.chinahengchang.com/


2/5




Tel: 0086-371-86106152 Fax: 0086-371-86106152



the foams are thinning, the mineral is bounded with foams, and floats up to the surface of mineral

slurry and the mineralized foam is formed. The liquid surface can be adjusted with the height of

adjustment flashboard, so that the useful foams are scraped with squeegee.

Features of Floatation Machine:

1. large air-absorption capacity

2. low energy consumption

3. Every cell owns three functions: air absorption, slurry absorption, and floatation separation, and

the cells form a floatation separation loop by itself without any auxiliary equipment, and isallocated horizontally, which favors the change of flow.

4. The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to

the largest extent.

5. There is self-control device on the surface of mineral slurry, so it is easy to adjust it.

6. The impeller has backward-inclined upper and lower vanes, which produce upper and lower

circulation of mineral slurrry respectively.

Specifications of Flotation Machine

Type Cubage(m3)Diameter of

impellor(mm)

Capacity(m3/min)Speed of

impellor(r/min)

Motor of

impellor

Weight

(t/single

trough)

XJK-0.13 0.13 200 0.05-0.16 600 Y90L-4-1.5 0.23

XJK-0.23 0.23 250 0.12-0.28 500 Y90L-4-1.5 0.35

XJK-0.35 0.35 300 0.18-0.4 470 Y90L-4-1.5 0.43

XJK-0.62 0.62 350 0.3-0.9 400 Y100L-4-3 0.86

XJK-1.1 1.1 500 0.6-1.6 330 Y100M-4-5.5 1.38

XJK-2.8 2.8 600 1.5-3.5 280 Y100M-4-11 2.33

XJK-5.8 1.1 750 3-7 240 Y100M-4-22 3.533

we can provide program design, process flow design, standard and non-standarddesign for clients.

Welcome customer consultations, propose plant operation scales based oncustomer needs, and provide detail plant constructing plan;

Provide customers with related technical documents timely; Provide equipment installation and commissioning service;


3/5




Tel: 0086-371-86106152 Fax: 0086-371-86106152



Structure the management framework for customers, train productionmanagement, equipment maintenance and quality control personnel;

Timely and efficient delivery of original spare parts; One year equipment warranty, life-long maintenance advice andconsultation;

Receive customer technical feedbacks 24 hours; provide customers withthe technical diagnosis;

Aid customers upgrading of systems, equipments and moulds; Regularly visit customers to seek feedback, to achieve a free-way communication withcustomers


4/5




Tel: 0086-371-86106152 Fax: 0086-371-86106152




5/5




Tel: 0086-371-86106152 Fax: 0086-371-86106152



Tip: Hengchang Metallurgy Building Materials Equipment Plant, located in the center of

Gongyi city, Henan province, is next to Zhengzhou city, the capital of Henan province.

Gongyi are adjacent to Mount Songshan with the birthplace of Chinese Kungfu and Shaolin

temple in the south and Luoyang city with Luoyang Longmen grottos in the east. And it is

very convenient to the Zhengzhou international airport andZhengzhou railway station in the

west and famous Yellow river in the north.

Documents

Flotation machine china