-
Glenfield Valves LtdQueens DriveKilmarnockKA1 3XF AyrshireUnited
KingdomE: [email protected]
GLENFIELD DIAPHRAGM OPERATED CONTROL VALVE, FORCONSTANT FLOW
APPLICATIONS (CFV), PN10/16.Reduced bore, WRAS approved materials,
AISI316 Pipes and Fittings.
859/002X001
changes in upstream or downstream pressures. The main control
valve is pilot operated, capable of precise set-ting and easy
adjustment of wanted flow, independent of system pressures.
Product Description:Glenfield Diaphragm Operated Control Valve
for water to max. 70 C
Standards:Designed according to EN 1074 - 5Face to face
according to EN 558 Table 2 Basic Series 1Standard flange drilling
to EN1092 (ISO 7005-2), PN 10/16
Test/Approvals:Hydraulic test according to EN 1074-1 and 5 / EN
12266.Seat: 1.1 x PN. Body: 1.5 x PN.Test of duty point, if
specified (Optional).Materials used, approved to WRAS
Features:
Accessories:Manometers, position indicator, anti-cavitation
system, different SFMs or MFMs according to application.
COPYRIGHTAVK GROUP A/S Version no. 10 - 08/27/2013 3:37 AM
Main control valveLifted seat, to avoid damage due to
cavitation; High Kv value, at fully open position.Geometry of
regulating disc, provides high ratio of travel- Kv, resulting in
optimal control performance.
All, non coated internals, made of AISI316.Body and bonnet of
ductile iron with fusion bonded epoxyWRAS-DVGW/W270/UBA.
Pilot systemModular and compact design, easy for application
change.Main components: Distribution block, filter and hydraulic
control block.
Distribution block, AISI 316.Connecting main control valve to
pilot system.Includes control of opening and closing speed of main
valve.
Filter, AISI 316.rrHigh capacity, long life, easy to flush, back
flushing possible.Mesh 100, high performance wire screen type.
Hydraulic control block, AISI 316.Includes balanced pilot valve,
providing more stable pressure set.Can be set up for diffeff rent
applications, using specific: Single Function Modules (type SFM) or
MultiFunction Modules (type MFM).
Control orifice.
(Patent Pending)
, 300 micron, RAL 5017, according to
-
For further details see section "Technical Information".The
designs, materials and specifications shown are subject to change
without notice due to the continuous development of our product
programme.
Version no. 10 - 10/22/2013 11:43 AM
GLENFIELD DIAPHRAGM OPERATED CONTROL VALVE, FOR CONSTANTFLOW
APPLICATIONS (CFV), PN10/16.Reduced bore, WRAS approved materials,
AISI316 Pipes and Fittings.
859/002X001
Reference Nos. and Dimensions:
AVK ref. nosDNmm
Flangedrilling
Lmm
W1mm
W2mm
H3mm
Theoreticalweight kg
859-0065-00-1140020(1) 65 PN10/16 290 131 161 356
17.0859-0065-00-1140021(1) 65 PN10/16
Component List:
Flow rangem3/hr
5 - 15290 131 161 356 17.08 - 20
SECTION C-C SECTION D-D
24 25 333226 27 28 29 30
34
35
36
37
38
3122 23
L
H3
C
C
D
D
39 40 41 42
W2 W1 B
B
DN 65-150 DETAIL E DN 200-300 DETAIL E
E
SECTION B-B
14
21
12 13
16
17
18
19
20
1110
15
8
7
6
5
4
2
1
343
44
45
47
46
9
MDPEgniR-O.2MDPEgniR-O.1MDPElaeScsiD.4laeSatleD-4AedarGtuNxeH.3
5. Washer SS ISO 3506; Grade A4 6. Hex Bolt SS ISO 3506; Grade
A4MDPEgniR-O.8MDPEmgarhpaiD.7
13. Stem Guide
39. Pilot valve42. Filter AISI 31641. Mechanical air-vent AISI
316
AISI 316tloB.04613 ISIA38. Seat AISI 31637. Ball AISI 31636.
Spring AISI 31635. O-Ring EPDM34. Body AISI 31633. O-Ring EPDM32.
O-Ring EPDM31. Needle for opening AISI 31630. O-Ring EPDM29. Insert
AISI 31628. O-Ring EPDM27. Body AISI 31626. Needle for closing AISI
31625. Bushing AISI 31624. Gasket EPDM23. O-Ring NBR22. Flat Seal
EPDM21. Body Ductile Iron, EN-GJS-500-7 (GGG-50)20. Seat AISI
31619. Regulating Plug AISI 31618. Disc Retainer AISI 31617.
Distance Pipe AISI 31616. Diaphragm Support AISI 31615. Spring AISI
31614. Bonnet Ductile Iron, EN-GJS-500-7 (GGG-50)AISI 31612. Stem
AISI 31611. O-Ring EPDM10. O-Ring EPDM9. Hex Nut Grade A4 - Delta
Seal
43. Orifice plate flange AISI 316 44. Orifice plate AISI
3164AedarG;6053OSISStloBdenihcaM.64613 ISIAteksaG.54
47. O-Ring EPDM(1)
(1) This component is provided by customers.Components may be
substituted with equivalent or higher class materials without prior
notification.
-
For further details see section "Technical Information".The
designs, materials and specifications shown are subject to change
without notice due to the continuous development of our product
programme.
Version no. 10 - 08/27/2013 3:36 AM
AVK ref. nosDNmm
Flangedrilling
Flow rangem3/hr
Lmm
W1mm
W2mm
H3mm
Theoreticalweight kg
859-0065-00-1140022(1) 65 PN10/16 290 131 356
17.0859-0080-00-1140020(1) 80 PN10/16 310 131 375
20.8859-0080-00-1140021(1) 80 PN10/16 310 131 375
20.8859-0080-00-1140022(1) 80 PN10/16 310 131 375
20.8859-0100-00-1140020(1) 100 PN10/16 350 131 394
25.6859-0100-00-1140021(1) 100 PN10/16 350 131 394
25.6859-0100-00-1140022(1) 100 PN10/16 350 131 394
25.6859-0100-00-1140023(1) 100 PN10/16 350 131 394 25.6
859-0150-00-1140020(1) 150 PN10/16 480 451
72.6859-0150-00-1140021(1) 150 PN10/16 480 451
72.6859-0150-00-1140022(1) 150 PN10/16 480 451
72.6859-0150-00-1140023(1) 150 PN10/16 480 451
72.6859-0200-00-0140020(1) 00601NP002
139
542 86.9859-0200-00-0140021(1) 00601NP002
139
542 86.9859-0200-00-0140022(1) 00601NP002
139
542 86.9859-0200-00-0140023(1) 00601NP002
139
542 86.9859-0200-00-1140020(1)
24500661NP002859-0200-00-1140021(1)
24500661NP002859-0200-00-1140022(1)
24500661NP002859-0200-00-1140023(1)
24500661NP002859-0250-00-0140020(1) 03701NP052
202
659 143.5859-0250-00-0140021(1) 03701NP052
202
659 143.5859-0250-00-0140022(1) 03701NP052
202
659 143.5859-0250-00-0140023(1) 03701NP052
202
659 143.5859-0250-00-1140020(1) 03761NP052
202
659859-0250-00-1140021(1) 03761NP052
202
659859-0250-00-1140022(1) 03761NP052
202
659859-0250-00-1140023(1) 03761NP052
202
659859-0300-00-0140020(1) 05801NP003
252
736 203.0859-0300-00-0140021(1) 05801NP003
252
736 203.0859-0300-00-0140022(1) 05801NP003
252
736 203.0859-0300-00-0140023(1) 05801NP003
252
736 203.0859-0300-00-1140020(1) 05861NP003
252
736 203.0859-0300-00-1140021(1) 05861NP003
252
736 203.0859-0300-00-1140022(1) 05861NP003
252
736 203.0859-0300-00-1140023(1) 05861NP003
252
736 203.0(1) Orifice plate (Component 43) depending of specific
flow rate. Please see specific flow chart.
161161161161161161161161
161161161161202202202202202202202202
17 - 427 - 18
14 - 3627 - 657 - 18
14 - 3423 - 5747 - 113
30 - 7550 - 15080 - 200
115 - 25450 - 130
115 - 290150 - 339190 - 33950 - 130
115 - 290150 - 365190 - 45285 - 200
140 - 350230 - 530280 - 53085 - 200
140 - 350230 - 570280 - 690120 - 300175 - 430340 - 762460 -
762120 - 300175 - 430340 - 825460 - 1017
859-0125-00-1140020(1) 125 PN10/16 400 131 413
30.8859-0125-00-1140021(1) 125 PN10/16 400 131 413
30.8859-0125-00-1140022(1) 125 PN10/16 400 131 413
30.8859-0125-00-1140023(1) 125 PN10/16 400 131 413 30.8
161161161161
13 - 3221 - 5232 - 8048 - 118
86.986.986.986.9
275275275275275275275275
275275275275275275275275
252252252252252252252252
143.5143.5143.5143.5
