Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
PRODUCT CATALOGUE
FLUID CONTROL
1FLUID CONTROL
With a rich legacy spanning over 116 years, we are immensely proud of
our status as leading manufacturer, merchandiser and distributor of
steel and value added steel products.
Our extensive product portfolio, robust infrastructure and technical
competencies, combined with our continuous improvement initiatives
has solidified our reputation as the pre-eminent supplier of steel on the
African continent.
At Macsteel, we operate through a strategic network of over 40 service
centres, branches and warehouses, enabling us to provide our valued
customers with exceptional levels of personalised service throughout
the entire steel supply chain.
1FLUID CONTROL
Niche focussed business supplying a comprehensive range of fluid control systems.
Macsteel Fluid Control is a key niche focused business which operates throughout various industry sectors. It supplies a comprehensive range of valves, actuators, fluid level gauges, filter systems, valve interlock systems and a full range of steam products including traps, strainers and control valves. Valves supplied range from basic brass gate valves to advanced technical control systems. It supplies carbon and stainless steel pipes, fittings and flanges, steel and secondary piping products and associated products.
Macsteel Fluid Control is the sole franchise holder for Southern Africa of a wide range of well-known product brands.
A major step towards import substitution has been the establishment of a local valve assembly operation.
This Macsteel Business Unit assembles Bermad control valves, Igema liquid and magnetic level gauges and Smith interlock systems.
Macsteel Fluid Control employs highly skilled technical personnel with the expertise, skills and a detailed knowledge of product design and specifications. Its reputable branded products are found in diverse markets, ranging from irrigation and agriculture to petrochemical and nuclear energy.
Macsteel Fluid Control is ISO 9001 certified.
Macsteel Fluid Control
11FLUID CONTROL
ContentsL&T VALVES 1
BUTTERFLY VALVES AND ACTUATORS 2
AMRI BOAX B 2
AMRI ISORIA 2
AMRI KE 2
AMRI DANAIS MT II & DANAIS 150 2
AMRI ACTUATORS MANUAL AND PNEUMATIC 3
NATCO BUTTERFLY VALVES 3
NATCO PNEUMATIC ACTUATORS 3
NATCO ELECTRO PNEUMATIC POSITIONERS 4
NATCO SWITCH PACKS 4
GATE, GLOBE, CHECK & PISTON VALVES 5
AMRI, NATCO WAFER CHECK VALVES 5
BRANDED BRASS AND GUNMETAL VALVES 5
TEROFOX, ANSI GATE, GLOBE & CHECK VALVES 5
NATCO CAST IRON GATE & GLOBE VALVES 5
CYL KNIFE GATE VALVES 6
NATCO RESILIENT SEALED GATE VALVES 6
CONTROL VALVES 7
BERMAD CONTROL VALVES 7
SCHUBERT & SALZER CONTROL SYSTEMS 8
BALL VALVES 10
ENOGAS & NATCO BRASS AND NYLON BALL VALVES 10
NATCO BALL VALVES 10
FIRE SAFE BALL VALVES 10
LEVEL GAUGES 11
IGEMA LIQUID LEVEL GAUGES AND GLASS 11
IGEMA LEVEL GAUGE 11
NATCO LEVEL GAUGES STAINLESS STEEL OR BRASS 11
SPECIALISED EQUIPMENT 12
SMITH FLEXI DRIVE 12
SMITH EASI DRIVE 12
STRAINERS 12
NATCO SIGHT FLOW INDICATORS, CONICAL STRAINERS 12
RUBBER BELLOWS 13
SPECIALISED VALVES (OTHERS) 14
NATCO DIAPHRAGM VALVES 14
STRAHMAN MG LINE BLINDS & SPECIALISED VALVES 14
BALANCING VALVES 14
SAFETY VALVES AND EQUIPMENT 15
SMITH FLOW CONTROL, CASTELL & ELLIS INTERLOCK
SYSTEMS 15
SMITH FLOW CONTROL SPECIAL EQUIPMENT 15
ELMAC FLAME ARRESTERS 15
MOTHERWELL STORAGE TANK SAFETY 15
NATCO SAFETY & RELIEF VALVES 16
ELFAB BURSTING DISCS 16
EXPANDING PLUG VALVES 16
EXPANDING PLUG VALVE 16
STEAM/CONDENSATE 17
ARMSTRONG TRAP MANIFOLDS 17
ARMSTRONG STEAM TRAP 17
ARMSTRONG LIQUID DRAINERS 17
ARMSTRONG AIR VENTS 17
YOSHITAKE PRESSURE/TEMPERATURE REGULATION 17
HUMIDIFIERS 18
HOT WATER SYSTEMS 18
INDUSTRIAL HOT WATER SYSTEMS 18
FILTRATION 19
AMIAD SELF CLEANING FILTERS AND FILTRATION
SOLUTIONS 19
SYNERGY 20
MAC SHOULDER PIPE SYSTEM 21
MAC GROOVE-END PIPE SYSTEM 21
MAC RING-JOINT SYSTEM 22
CABLE-LOCK™ PIPE SYSTEM 22
LULA/LULA-LOCK™ PIPE SYSTEM 23
MAC FLANGED PIPE SYSTEM 23
HVAC PIPING SYSTEM 24
PIPES 25
FITTINGS 26
FLANGES 27
1FLUID CONTROL
L&T VALVES
L&T ValvesGATE, GLOBE & CHECK VALVES
ASME Class 150 - 2500, 15mm - 1800mmAPI 600 | API 623 | API 594 | ASME B16.34 | API 602 | API 603
Application: Process industries: Oil, chemical, petrochemical, refining, pulp and paper, pharmaceutical, mining, food processing and water treatment.
Power Industries: nuclear, fossil fuel (coal and gas), and renewable and district heating.
Upstream and midstream industries: offshore production platforms, LNG Liquefaction and regasification terminals, tankers carriers and tank farms, and ship-building.
BUTTERFLY VALVES AND ACTUATORS
Butterfly Valves and Actuators
AMRI BOAX B
Application: Heating, ventilation, air conditioning, irrigation, industrySize range: 40mm to 200mm - 16 bar 250mm to 1000mm - 10 barConstruction: Disc: Ductile iron or stainless steel Liner: EPDM, high content nitrile Body: Ductile iron Shaft: 13% chromium, stainless steel
AMRI ISORIA
Application: General process industry, water systems, etcSize range: 40mm to 3200mmPressure range: From industry vacuum to 25 barConstruction: Disc: Various including stainless steel, ductile iron, norihard, noridur and others Liner: Various including EPDM, nitrile, carboxylated nitrile, hypalon, viton and others Body: Cast iron, ductile iron and cast steel Shaft: Stainless steel
AMRI KE
Application: Chemical plants with high corrosion and/or erosion applicationsSize range: 40mm to 300mm - Wafer pattern / lugged 350mm to 600mm - U-sectionPressure range: From industry vacuum to 10 barConstruction: Disc, Shaft: Stainless steel and PFA-teflon coated stainless steel Liner: PFA-teflon with elastomer backup, EPDM, nitrile, carboxylated nitrile, hypalon, viton or high temperature silicone rubber Body: Cast iron, ductile iron, cast steel
AMRI DANAIS MT II & DANAIS 150
Application: High performance applications where higher temperatures and pressures are requiredSize range: 50mm to 900mmPressure range: Class 150 (PN20) and Class 300 (PN50)Construction: Disc: Cast iron or stainless steel Body: Cast iron or stainless steel Seats: Metallic, PTFE or elastomer
2FLUID CONTROL
AMRI ACTUATORS MANUAL AND PNEUMATIC
Application: All quarter turn actuator needsSize range: Up to 9000 NmPressure range: Up to 10 bar to operateTemperature range: -40°C to 120°CConstruction: Alloys with various coatingsMounting: ISO base with Namur solenoid connectionsSpecial features: A full complementary range of switches, positioners and auxiliaries available
3FLUID CONTROL
BUTTERFLY VALVES AND ACTUATORS
NATCO BUTTERFLY VALVES
Application: General industry, HVAC and agricultureSize range: 50mm to 1200mmPressure range: 10 bar to 16 barTemperature range: -15°C to 130°CConstruction: Disc: Coated ductile iron or stainless steel Liner: EPDM or NBR Body: Ductile iron Shaft: Stainless steel
NATCO PNEUMATIC ACTUATORS
Application: All quarter turn actuator needsSize range: 16 Nm to 2500 Nm nominalPressure range: Max 10 bar air to operateTemperature range: -150°C to 130°CConstruction: Coated aluminium with coated steel pinionMounting: ISO base and top with Namur solenoid connections
BUTTERFLY VALVES AND ACTUATORS
NATCO ELECTRO PNEUMATIC POSITIONERS
Application: For all modulating control requirementsRange: Suitable for 20-100kPa or 4-20mA signalOptions: Four feedback options Either single or double actingFeatures: Field reversible No pipework changes No extra parts required
NATCO SWITCH PACKS
Application: Mechanical or proximity switches with feedback signalsFeatures: Metal or Plastic coversOptions: Retrofit mounting to suit most quarter-turn actuators
4FLUID CONTROL
5FLUID CONTROL
NATCO BRASS AND GUNMETAL VALVES
Application: Shut off and control in general industry where gates, globes and check valves are usedSize range: 8mm to 100mmPressure range: Up to 40 barConstruction: Brass, bronze (gunmetal)End connections: Screwed or flanged
GATE, GLOBE, CHECK & PISTON VALVES
Gate, Globe, Check & Piston Valves
AMRI, NATCO WAFER CHECK VALVES
Application: Industrial, mining, irrigation, process, chemical, petrochemical industries and municipalitiesSize range: 50mm to 600mmPressure range: Up to PN 250 / ANSI 1500 depending on size and valve selectionTemperature range: -250°C to 538°C
TEROFOX, ANSI GATE, GLOBE & CHECK VALVES
Application: Petrochemical, steam and other high pressure applicationsSize range: 8mm to 600mmPressure range: Up to ANSI 2500Construction: Cast steel, forged steel, cast iron, stainless steel, special alloysEnd connections: Screwed, socket weld, butt weld or flanged
NATCO DUCTILE IRON GATE, GLOBE & CHECK VALVES
Application: Industrial, agricultural, mining and robust applicationsSize range: 50mm to 300mmPressure range: Gate and Check - PN 10 Globe - PN 16Temperature range: -15°C to 130°CConstruction: Body: Cast iron Gate Valves Seat: Cast bronze Globe Valves Seats: Stainless steelOptions: Rising and non-rising spindlesEnd connection: Flanged
GATE, GLOBE, CHECK & PISTON VALVES
CYL KNIFE GATE VALVES
Application: Water, sewage, slurry, paper and pulpSize range: 50mm to 600mm with larger sizes on requestConstruction: Body: Cast iron, cast steel, stainless steel Seals: Metal to metal, metal to elastomer, elastomer to elastomer Blade: Stainless steel or customer requirementsEnd connections: Wafer to suit customer flanges
NATCO RESILIENT SEALED GATE VALVES
Application: Civils and water reticulationSize range: 50mm to 350mmPressure range: 16 barConstruction: Cast iron, SG ironEnd connection: Flanged, spigot, shouldered
6FLUID CONTROL
7FLUID CONTROL
CONTROL VALVES
Control Valves
BERMAD CONTROL VALVES:
Use: Automatic Hydraulic Control valve for; pressure reducing, pressure sustaining, pressure relief, pump control, level control, flow control, Burst control, Solenoid control and Electronic control Air release valves for; potable water, irrigation water, sewage and wastewater.Sizes available: Waterworks/Building and Mining: 40mm - 1200mm (dependent on the series) Irrigation: 15mm - 1200mm (dependent on the series) Fire Protection: 40mm - 300mm (dependent on the series)Pressure range: Varies per series, PN10, PN16, PN25 and PN40 (10 to 40bar)Construction: Varies per Series; Reinforced Nylon, Cast iron, Ductile/SG iron, Cast Steel (WCB), Stainless steel, Exotic materials and Composite MaterialsEnd connections: Flanged, screwed and Victaulic, dependant on the series
CONTROL VALVES
MODEL 7010
Application: Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Angle seat on/off valve 7010Nominal size: DN 8 - 80Nominal pressure: PN 16, PN 40Media temperature: -30°C to +200°C, optional -100°C to +220°CMaterial: Bronze and stainless steel
8FLUID CONTROL
MODEL 7210
Application: Motor valve for on/off- and modulating operation for neutral and aggressive media. Angle seat motor valve 7210Nominal size: DN 8 - 80Nominal pressure: PN 16, PN 40Media temperature: -30°C to +200°C, optional -100°C to +220°CMaterial: Bronze and stainless steelActuation: on/off and control actuation, optional position control and position feedback plus limit switch
MODEL 8038
Application: Fast and high resolution motor valve for control and switching of neutral through to highly aggressive media in process engineering, chemical industries and for plant equipment. Sliding gate motor valve 8038Nominal size: DN 15 - 250Nominal pressure: PN 10 - 100, ANSI # 150 - 600Media temperature: -60°C to +350°C optional -196°C to 530°CMaterial: carbon steel, stainless steel, Hastelloy, special materialPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connectionDead band: ± 0.2%Repeatability: ± 0.1%Stroking speed: adjustable between 4,7 and 35 secondsActuator: high resolution motor actuator for control and switching with stroke monitoring, limit switches and optional fail safe unit
Schubert & Salzer Control Systems’ products can be found in a wide variety of areas within the process industry. Whether it is in the production of chemical or pharmaceutical products, food processing, bottle filling or the production of steel, polymers, paper or solar cells and tires – in short, wherever liquid or gaseous flows need to be controlled.
CONTROL VALVES
9FLUID CONTROL
MODEL 8021
Application: Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner. Sliding gate control valve 8021Nominal size: DN 15 - 250Nominal pressure: PN 10 - 160, ANSI # 150 - 900Media temperature: -60°C to +350°C, optional -196°C to +650°CMaterial: carbon steel, stainless steel, Hastelloy, special materialPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connection
MODEL 6051
Application: Pneumatic control valve in right angle design with integrated microprocessor positioner type 8049 or as a shut-off valve for applications in pharmaceutic and food industry. Aseptic angle control valve 6051Nominal size: DN 15 - 65Nominal pressure: PN 16Media temperature: -20°C to +135°CMaterial: Stainless steelDiaphragm material: EPDM with PTFE-foilPositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connection. Available with pneumatic on/off actuator
MODEL 4040
Application: The ball sector valve especially designed to handle arduous duties, slurries and viscous fluids is suitable for control and isolation. Ball sector valve 4040Nominal size: DN 25 - 300Nominal pressure: PN 10 – 40, ANSI # 150 - 300Media temperature: -60°C to +350°C optional -196°C to 530°CMaterial: stainless steel 1.4408 (CF8M) and 1.4404 (316L) Various seat material combinationsPositioner: pneumatic, analogue electro pneumatic, digital electro-pneumatic, Ex-i version, Motorized
MODEL 7079
Application: Pneumatically operated pinch control valves for the control of granulated, viscous, doughy and aggressive media in demanding applications. Pinch control valve 7079Nominal size: DN 15 - 50Operating pressure: to 6 barMedia temperature: -30°C to +130°CTube material: NBR and EPDM (conforming to FDA), FKM, and morePositioner: pneumatic, analogue electro-pneumatic, digital electro-pneumatic, Ex-i version, AS-i bus connectionType 7078 with pneumatic on/off actuator
10FLUID CONTROL
BALL VALVES
Ball Valves
ENOLGAS & NATCO BRASS AND NYLON BALL VALVES
Application: Water, compressed air, oils, non corrosive fluids and hydrocarbons in generalSize range: 8mm to 100mmPressure range: Up to 50 bar depending on the sizeConstruction: Nickel plated brassTemperature range: -20°C to 150°C
NATCO BALL VALVES
Application: General and process industrySize range: 8mm to 250mmPressure range: 1 piece up to 70 bar 2 piece up to 50 bar 3 piece up to 80 bar Note: pressure depends on size and temperature
Construction: Body: Carbon steel, stainless steel Seats: PTFE 1 piece: screwed 2 piece: flanged 3 piece: screwed and/or socket weld ends 3 way: T port and L port
FIRE SAFE BALL VALVES
Application: Process, chemical, natural gas and petrochemical where firesafe operation is really importantSize range: 15mm to 750mmPressure range: ANSI 150 up to ANSI 1500 DIN PN16 to PN40Construction: Body: Carbon steel, stainless steel, Exotic Materials Ball: Stainless Steel or Exotic Materials Seats: PTFE and other special material on requestEnd connections: Flanged
11FLUID CONTROL
LEVEL GAUGES
Level Gauges
IGEMA LIQUID LEVEL GAUGES AND GLASS
Application: Most applications are catered for in our wide range of liquid level gaugesSize range: Unlimited length as per customer requirementsPressure range: Glass Tube Gauges: Non-hazardous media up to 32 bar Reflex Gauges: Steam (saturated) up to 32 bar Other media up to 160 bar Bi-colour Gauges: Steam (saturated) up to 180 bar. Other media up to 250 bar Transparent Gauges: Steam (saturated) up to 120 bar. Other media up to 250 barEnd connections: As per application requirements
IGEMA MAGNETIC LEVEL GAUGE
Application: These gauges are ideally suited for robust applications where clear indication is required as a result of the media being contained in a sealed chamberSize range: Unlimited length as per customer requirementsPressure range: Up to 150 barTemperature range: Up to 400°CConstruction: Stainless or high nickel alloys, PVDF, PP, PVC as well as PVDF/PFA lined gaugesEnd connections: As per application requirements
NATCO LEVEL GAUGES STAINLESS STEEL OR BRASS
Application: Non-hazardous mediaSize range: Unlimited length as per customer requirementsPressure range: Up to 16 barConstruction: Stainless steel / brassEnd connections: Screwed or flanged
SPECIALISED EQUIPMENT
Specialised Equipment
SMITH FLEXI DRIVE
Application: Problem valve locations which may be in hazardous areas, below water, in confined spaces or in pits and in areas where noxious fugitive emissions prevail, or in out of reach positionsConfigurations: Every Flexi Drive system is designed and assembled according to specific application requirements
SMITH EASI DRIVE
Application: The low-cost alternative to permanent dedicated actuatorsPower options: Electrical Pneumatic HydraulicTorque range: 100Nm to 100 000Nm
STRAINERS
Application: All strainer requirements including Y and T strainersSize range: 6mm to 600mmPressure range: Up to ANSI 900Construction: Carbon steel, stainless steel, bronze and exotic materialsEnd connections: Flanged, butt weld, socket weld and screwed
NATCO SIGHT FLOW INDICATORS, CONICAL STRAINERS
Application: VariousSize range: 15mm to 100mmPressure range: Up to Class 150Construction: Carbon steel and stainless steelEnd connections: Screwed or flanged
12FLUID CONTROL
SPECIALISED EQUIPMENT
RUBBER BELLOWSApplication: The Flexible Rubber Expansion joint is mainly used in the pipeline of water pumps, oil pumps, blowers existing in the field of drainage, petroleum and chemical industry, mineral mountain and heating supply. It can decrease vibration and noise, repair the deformation of piping system with convenient installation.Size: 25mm - 300mm, 300mm - 600mmPressure rating: 16/10 barTemperature range: -20°C - 120°C
13FLUID CONTROL
BALANCING VALVESApplication: For installation on heating and cooling systems. They allow a correct balance between the different branches of a heating/cooling system.Size: 15mm - 300mmPressure rating: 16/20/25 Bar (depending on the model)Temperature range: -10°C - 130°CConstruction: Brass and cast ironEnd connection: Screwed or flanged
SPECIALISED VALVES
Specialised Valves (others)
NATCO DIAPHRAGM VALVES
Application: ‘Weir’ type valves are available for control purposes and ‘straight through’ valves are used for slurries and abrasive applications. With the wide variety of linings and diaphragms available, these valves provide economical solutions in a wide range of corrosive and/or abrasive applicationsSize range: 8mm to 350mmPressure range: Up to 16 barTemperature range: Up to 175°CConstruction: Body: Cast iIron, cast steel or stainless steel Diaphragm: A wide range Body Lining: A wide rangeEnd connections: Screwed, flanged
STRAHMAN MG LINE BLINDS & SPECIALISED VALVESApplication: Chemical, petrochemical and related industries where tight shutoff, zero leakage, free-flowing and non-clogging valves are required with visible proof from blind linesSize range: As per customer specificationsPressure range: Valves: Industrial vacuum to 380 bar Blinds: 25mm to 750mmTemperature range: -200°C to 800°CConstruction: As per customer requirements including special materials
14FLUID CONTROL
15FLUID CONTROL
SAFETY VALVES AND EQUIPMENT
Safety Valves and Equipment
SMITH FLOW CONTROL, CASTELL & ELLIS INTERLOCK SYSTEMS
Application: These unique products provide tangible protection to any client’s investment in plant and equipment as well as enhancing safety thresholds of employee welfare by ensuring that correct operating procedures are followed. The process management system for improved safety in the working environment is based on ‘coded-card’ key interlocks
SMITH FLOW CONTROL SPECIAL EQUIPMENT
Application: Safe remote and local operation with interlocks on actuated motorized, electric, hydraulic and pneumatic valves using: • Key Management Systems with an easy to identify key permit system in a cabinet • Anti Tamper Locks which allow the valve to be locked in any position for manual flow control • Chains, ISO-Loks, Car Seals provide simple non-sequential locking • Explosion Proof Switches • Sequence Control units permit complex variations • Pneumatic Control Valves
ELMAC FLAME ARRESTERS
Application: The accidental ignition of flammable gases or vapours in pipelines and from vent pipes presents a constant threat to plant and personnel. The use of the external measures taken to avoid or minimise the possible consequences.Size range: 15mm to 1200mmConstruction: Housing: Aluminium, carbon steel, stainless steel Elements: Stainless steel 316
MOTHERWELL STORAGE TANK SAFETY
Application: Petrochemical, oil, gas, biogas and water industries tank environment protection equipmentProducts: Pressure relief valves, vacuum relief valves, emergency vents, gauge hatches, tank blankets, floating suction units, slot dip gatches, gas purifiers, flame trap
16FLUID CONTROL
SAFETY VALVES AND EQUIPMENT | EXPANDING PLUG VALVES
Expanding Plug Valves
NATCO SAFETY & RELIEF VALVES
Application: Safety and relief valves for general industrySize range: 15mm to 80mmPressure range: Up to 20 barConstruction: Bronze, stainless steel or ductile ironEnd connections: Flanged or screwed
ELFAB BURSTING DISCS
Application: Bursting disc technology extends from pressure relief in the process industry through to mechanical switching in rocket fuel systemsSize range: 15mm to 600mmPressure range: 0.03 bar to 185 barTemperature range: -200°C to 600°C
EXPANDING PLUG VALVE
Application: All Petrochemical plants, fuel storage or transfer DOUBLE BLOCK and BLEED isolationSize/Pressure range: 2 inch to 24 inch for ANSI 150# rated 2 inch to 14 inch for ANSI 300# rated 2 inch to 12 inch for ANSI 600# ratedMaterials of construction: Body: Carbon steel ASTM-A-216 WCB, Chrome Plated Bore Plug: Carbon steel ASTM-A-216-WCB, electroless nickel plated Stem: Carbon steel ASTM-A-216 WCB, nickel plated Slips: Ductile Iron ASTM-A-536 Slip Seals and O Rings: To suit the media / temp and pressure per application: • Viton, Nitrile, Epichlorohydrin, Ethylenepropylene and Fluorosilicone
17FLUID CONTROL
STEAM / CONDENSATION
Steam / Condensation
ARMSTRONG TRAP MANIFOLDS
Application: The modular answer for drip and tracer line applications which reduces installation costs by including all components - including steam trap, valve and fittings - in an easily filled, centrally located assemblyTypes: Steam distribution Concentrate collectionSizes: 4, 8 and 12 stage units
ARMSTRONG STEAM TRAP
Application: All steam systemsTypes: Inverted bucket, controlled disc, thermostatic, bimetallic, differential condensate, controller, float and thermostatic, thermostatic water, clean steam thermostatic, superheated
ARMSTRONG LIQUID DRAINERS
Application: Draining of heavy liquids from gases or light liquids (dual gravity drainers)Pressure range: 0-1800 psig (0-124 Bar) or specific gravity down to 0.40Types: See available types in air vents below
ARMSTRONG AIR VENTS
Application: Remove gases from liquids and noncondensable gases from steam systemsPressure range: 0-1800 psig (0-124 Bar) or specific gravity down to 0.40Types: Pulysulfone see-through, free floating lever, high leverage, thermostatic, fixed pivot
YOSHITAKE PRESSURE/TEMPERATURE REGULATION
Application: Safe efficient management of steam, air and liquid systems by pressure reducing valves and temperature regulators which maintain constant pressure or temperature for process controlTypes: Direct acting, pilot operated
18FLUID CONTROL
STEAM / CONDENSATION
HUMIDIFIERS
Application: All industries that require controlled humidityTypical industries: Hospitals, bottling plants, fruit or tobacco drying plantsTypes: Electric and pneumaticSizes: To suit the control conditions of the customerAccessories: Temperature control
INDUSTRIAL HOT WATER SYSTEMS
Application: Leading -edge equipment and technology to fulfill your most exacting demands for performance, efficiency, safety, compliance and energy savings Hot water for industry mobile thermal utilitly pods for process industry. Water temperature control. Hose stations.
HOT WATER SYSTEMS
Application: All hot water temperature conditioning applicationsTypes: Flo-Rite-Temp instantaneous water heaters Rada thermostatic mixing valves Heat transfer packages Dynafluid 2000 - steam & water mixing valve Dynafluid 3000 - hot & cold water mixing valve
19FLUID CONTROL
FILTRATION
FiltrationAMIAD SELF CLEANING FILTERS AND FILTRATION SOLUTIONS
Application: Oil and gas, waste water, general industry, municipal and marine, cooling water, injection water, process water, pre-filtration to membranes, water polishing, potable water, desalination and ballast waterFiltration degree: From 3500 micron to 2 micronSize / flow / pressure rating & materials of construction: Customised Solutions Tailor made to meet and Challenge and suit the onsite requirements and working conditions as per system design
20FLUID CONTROL
The unification of Synergies augmenting Macsteel Fluid Control’s already extensive range of carbon and stainless steel pipes, fittings and flanges to encompass our full range of piping systems in various coatings and linings including galvanising, painting, rubber lining, cement mortar lining, denso wrapping, etc to meet customers’ needs.
• Mac Shoulder pipe system• Mac Groove-ended pipe system/Klambon System• Mac Ring-joint system• Cable-Lock™ pipe system• Lula/Lula-Lock™ pipe system• Mac flanged pipe system• HVAC piping system
Fluid Control
21FLUID CONTROL
MAC SHOULDER PIPE SYSTEM | MAC GROOVE-END PIPE SYSTEM
Mac Shoulder Pipe SystemShoulder-ended steel pipes, fittings and couplings to SANS 815-1
• The shoulder-ended system is considered flexible, where certain angular and axial movement takes place within the jointing mechanism• Pipe size range: 50NB to 300NB• Maximum working pressure: up to 25 Bar• Light and easy to install• SATAS permit number: 221.6/1 to apply 815-1 mark• Full range of fabricated steel fittings - Bends 45º, 90º - Equal Tees 45º, 90º - Unequal Tees 45º, 90º - Elbows 45º, 90º - Blank ends - Adjustable bends - Adaptors - Reducers - Setting pieces 5º, 10º, 22.5º
Mac Groove-Ended Pipe System/Klambon System
Groove-ended steel pipes, fittings and couplings to SANS 815-2
• The groove-ended system will allow for controlled lateral pipe movement, including expansion, contraction and limited deflection• Pipe size range: 50NB to 300NB• Pressure ratings up to 69 Bar depending on joint configuration• Three to five times faster to install than welding on site• Full range of fabricated steel fittings - Bends 45º, 90º - Equal Tees 45º, 90º - Unequal Tees 45º, 90º - Elbows 45º, 90º - Blank ends - Adjustable bends - Adaptors - Reducers - Setting pieces 5º, 10º, 22.5º
Ring-ended fabricated pipes and fittings
Roll groove-ended fabricated pipes and fittings
Full range of fabricated roll and cut groove-ended pipes and fittings available
Mac Shoulder cast couplings
Stub-ended fabricated pipes and fittings
Cut groove-ended fabricated pipes and fittings
• Cable-Lock™ uses the same tried and tested socket system used in the plastic pipe systems, with the addition of the retaining or ‘flex wire’ incorporated in front of the seal to ‘lock’ the two pipes together• Cable-Lock™ pipe is suitable for above and below ground installations• Pipe size range: 50NB to 250NB• Maximum working pressure: up to 25 Bar
Easy to assemble and dis-assembly. Use pullingtool for big OD pipes
Full range of fabricated fittings available
22FLUID CONTROL
MAC RING-JOINT SYSTEM | CABLE-LOCK™ PIPE SYSTEM
Mac Ring-joint SystemRing Joint System: pipes, fittings and couplings
The Shurjoint® R88 ring joint piping system is a non-grooved mechanical pipe joining method and an excellent alternative where pipe is difficult to groove or when grooving, flanges or welding is not the preferred method.• Pipe size range: 350NB to 650NB• Maximum working pressure: up to 28 Bar, depending on the joint configuration• Wall thickness and pipe integrity not compromised on ring joint system as with roll grooving• Round steel rings: SAE J403 / ANSI 1020 or stainless steel• Ductile iron housings: ASTM A536 Gr. 65-45-12 / A395 Gr. 65-45-15• Rubber gasket: EPDM pr Nitrite• Heavy duty bolts and nuts: Zinc plated ASTM A183 Gr. 2 / ASTM A563• Full range of fabricated ring joint fittings are available• The pipe is supplied with a factory welded ring into each pipe end, galvanised or coated as per requirements
Cable-lock™ Pipe System
Factory suppliedweld rings
Gasket
Housing segment
Weld ring
Bolts & nuts
For installation, mount the rubber gasket over the pipe ends, place coupling segments overthe gasket and fasten the bolts and nut.
23FLUID CONTROL
LULA/LULA-LOCK™ PIPE SYSTEM | MAC FLANGED PIPE SYSTEM
Lula/Lula-Lock™ Pipe SystemSteel pipes rolled to plastic pipe sizes with integral locked socket
• Lula pipe system is totally interchangeable• Lula-Lock™ pipe system is the same socket with the addition of the retaining wire incorporated in front of the seal to ‘lock’ the two pipes together• Lula/Lula-Lock™ pipe systems can be laid above or below the ground - no special backfill required• Ideal for rocky areas, river or bridge crossings - no damage through exposure to UV• Less likely to be subjected to illegal connections• Full range of fabricated Lula fittings available, including reduction adaptors between Lula and Cable-Lock™ male and female ends• Pipe size range: 63mm to 200mm OD• Maximum working pressure: up to 25 Bar
Fabricated steel pipes and fittings to SANS 1476
Mac Flanged Pipe System
• Pipe size range: 50NB to 100NB• Maximum working pressure of system is that of max working pressure of flange
A
A
R Rubber lined flanged pipes
24FLUID CONTROL
HVAC PIPING SYSTEM
Supply of Steel Pipe Systems for Heating, ventilation, and air conditioning (HVAC)
Together with Shurjoint, we can offer systems to meet your needsin building service piping. The basic systems include chilled water, condenser water, hot water, potable water and compressed air.
Shurjoint Grooved Piping Systems are a proven alternative to welded systems which offer significant savings on installation time and provide a consistent connection quality. No flame is needed for joining pipe and this results in improved jobsite safety.
HVAC Piping System
Grooved couplings Grooved fittings
HDPE couplings Grooved valves
Plain ended uncoated Black screwed and socketed Red screwed and socketed
Galvanised screwedand socketed
Galvanised exacts
Stand pipesGalvanised screwedand capped
25FLUID CONTROL
PIPES
SANS 62 - Carbon Steel
SANS 719 - Welded Carbon Steel
Stainless Steel PipeWelded and seamless - ASTM A312 304L and 316L
Other sizes, schedule/wall thickness and lengths available on application or request
Seamless Carbon SteelASTM A106, API 5LB, ASTM A53, ASME SA106
Other sizes, schedule/wall thickness and lengths available on application or request
26FLUID CONTROL
FITTINGS
EN10241 - Wrought Steel Screwed Fittings EN10242 - Malleable Cast Screwed Fittings
JIS B2311-C - Carbon Steel Welded Butt-Weld Fittings ASTM A234 WPB - Carbon Steel Seamless Butt-Weld Fittings
Grooved Fittings and Couplings (low pressure)
ASTM A403 WPB - Stainless SteelWelded Butt-Weld Fittings
ANSI: B16.11 Threads to ANSI B1-20-1 Forged Carbon Steel Fittings
ISO 4144Stainless Steel 316 150lb Screwed Fittings
Other sizes, schedule/wall thickness and lengths available on application or request
27FLUID CONTROL
FLANGES
Wrought Steel, Mild Steel and Galvanised Backing Flange are to dimension specs EN1092-1: 2018, SANS 1123: 2011, BS10: 1962
ASTM / ASME A/SA240Plate Flanges - Stainless Steel Plate Flanges
Forged Flanges to ANSI B16.5
August 2021
BOKSBURG (Divisional Head Office)
7 Brook Rd, Lilianton, BoksburgPO Box 14585, Wadeville, 1422
Tel: 011 383 4000Fax: 086 679 0023
BETHAL
13 Vuyisele Mini St, 5 Brasslink, BethalPO Box 929, Bethal, 2310
Tel: 017 647 9340Fax: 017 647 5653
CAPE TOWN
Unit A2-A3 Steel Park, Symphony Way,Belville South, Cape Town
PO Box 582, Kasselvlei, 7533Tel: 021 959 7960Fax: 086 679 0327
DURBAN
Unit 6, Travertine Crescent, BriardenePO Box 201729, Durban North, 4016
Tel: 031 581 7803Fax: 086 644 3752
RICHARDS BAY
Unit 3A, Umiton Park, Brasslink, Richards BayPO Box 1549, Richards Bay, 3900
Tel: 035 751 3900Fax: 035 751 3905
PIPES, FITTINGS & FLANGES
3 Tielman Roos St, Germiston SouthPO Box 14252, Wadeville, 1422
Tel: 011 383 4000