www.4dsp.com

For Digital Signal Processingdesign & system integration

Onderkant tussenkop op deze lijn

Onderkant kop op deze lijn

www en kader tot hier

rev-1.2

FM788

www.4dsp.com/FM788

DescriptionThe FM788 is a FPGA-based COTS card designed to deliver unparalleled

performance for a variety of applications, including beamforming, direction finding,

RADAR, and satellite communications. This XMC module is based on Xilinx’s

Virtex-7 and features eight 16-bit A/D channels running up to 250Msps each.

Its design provides the largest channel count in this frequency range and the

most available onboard memory for real-time buffering of large data vectors.

With four 10Gbps optical transceivers, the FM788 can be directly connected to

a remote storage system without any CPU involvement. With the option to be

conduction-cooled, the FM788 features 10GBytes of DDR3 SDRAM that is tightly

coupled to the FPGA. The card also has the ability to synchronize signal sampling,

making it an excellent choice for large channel count data acquisition.

Features• Virtex-7XC7VX485T,XC7VX980T,XC7VX690T,

XC7VX1140T

• Eight-channel16-bit250MSPSA/Dconversion

• Availableasair-cooledandconduction-cooled.

Heat sink available for air-cooled applications

• XMCformfactor

• Coaxialfrontpanelinputson

SSMC connectors

• Single-endedAC-orDC-coupledanaloginput

• 4x10Gbpstransceivers

• Flexibleclocktreewithonboardorexternal

clock

• Trigger/Syncinput

• PCIecontroller:4-and8-lane

• XMCtoPCIeadapteravailableasanoption

• 1GbitFPGAconfigurationonboardFlash

• 128Mbituser-definedFlashROM

Applications• Beamforming

• DirectionFinding

• SoftwareDefinedRadio(SDR)

• RADAR/SONARImageProcessor

• Satellitecommunicationsystems

• RADAR&RadioJamming

• JPEG2000VideoImageProcessors

• BasebandCommunicationTransceivers

• Multi-Channeldigitalreceivers

• Upto64M-pointfloating-pointFFTprocessing

• EventProcessor&Recorder

Ordering informationBuild your part number online on the

product page:

http://www.4dsp.com/part_num/fm788.html

1 Not availble with the XC7VX485T

FFG/FLG1930

7DDR3

SDRAM 1512MB

DDR3 SDRAM 1

512MB

DDR3 SDRAM

512MB

DDR3 SDRAM

512MB

128MbSPI flash

BLASTSITE 1

BLASTSITE 2

clocksPCI expressend point

Configuration CPLDand JTAG

Parallel Flash1 Gb

LEDx4

8x up to 8 G

bp

s

4x2.5 Gb

ps

58 single ended

Local bus

8 single ended

to/from P

n4

8x up to 8 G

bp

s

Pn6

Rocket IO(VITA 42.2, 42.3)

PCI expressend point

64 single ended (LV

TT

L or lower)

or 32 LVD

S pairs

Pn4 Pn5

PCI Express(VITA 42.3)

XC7VX485T / XC7VX980TXC7VX690T / XC7VX1140T

Reference Clockor Clock InputTriggerADC AADC H

ClockOutput

……….

……….

………. Optional

ADS42LB6916-bit, 250 MSPS Clock

Tree

ADS42LB6916-bit, 250 Msps

4x 10Gb/s optical transceivers

Serial FPDPGigabit Ethernet

MGT

FM788 Virtex-7 XMC with eight 250Msps 16-bit A/D channels FM788 Virtex-7 XMC Card

AS9100 Certified

www.4dsp.com

For Digital Signal Processingdesign & system integration

Onderkant tussenkop op deze lijn

Onderkant kop op deze lijn

www en kader tot hier

rev-1.2

FM788

Software Support• StellarIPavailableforthisproduct.AsimplewaytodesignFPGA

firmware with automated code and bitstream generation

• BoardSupportPackage(BSP)

• Dataanalyzer

• Flashprogrammingutility

• HostsideAPI

• XilinxISEprojectsforbothFPGA

• TestfirmwareandVHDLsourcecode

• DriversforWindows,LinuxandVxWorks

User Selectable Build OptionsConfigure the FM788 board to meet you requirements. Your board will be built to

the specifications you select in the part number options.

Standalone OperationFor a lab test environment or custom system, the FM788 can be run in a standalone

mode. In this set-up the power is supplied through the industry standard PCIe

power connector.

Talk to us about your algorithmic requirements, 4DSP is a full-service firmware and software development house. We are a specialist at high

performance FFT and Video Processing. Check with us, we may have IP Cores that meet requirements for your application, right off the shelf.

ANSI/VITA 47Air-cooled Conduction-cooled

EAC4 EAC6

Operating temperature 0C to +55C -40C to +70C

Storage temperature -40C to +85C -50C to +100C

Humidity 95% 95%

Operating vibration 5Hz to 100HzPSD = 0.04g2/Hz

100Hz to 1000Hz PSD = 0.04 gs^2/Hz

1000Hz to 2000Hz PSD decreasing at

6 dB/ octave

5Hz to 100HzPSD = 0.04g2/Hz

100 Hz to 1000 HzPSD = 0.04 gs^2/Hz

1000 Hz to 2000Hz PSD decreasing at

6 dB/ octave

Operating shock 20g, 11 millisecond, half-sine or

20g, 11 millisecond,terminal sawtooth shock pulses in all three axes

20g, 11 millisecond, half-sine or

20g, 11 millisecond,terminal sawtooth shock pulses in all three axes

Operating altitude -1500 ft to 60,000 ft(with airflow)

-1500 ft to 60,000 ft(with airflow)

Conformal coating Optional Optional

AS9100 Certified