FOCUS ON JETTING DRAIN CLEANING ACCESSORIES€¦ · Standard Drain Jet A low cost drain cleaning nozzle suitable for use on most van and trailer mounted drain cleaning machines with

FOCUS ON JETTINGDrain & Sewer High Pressure Jetting

EQUIPMENT • PARTS & SPARES • SERVICING • TRAININGFLOWPLANT

DRAIN CLEANING ACCESSORIESHigh Pressure. Cleaner Solutions.

ENQUIRIES: [email protected] • 01722 325 424 • WWW.FLOWPLANT.CO.UK

Focussed on Your Jetting NeedsFlowplant has been creating innovative, high pressure drain and sewer cleaning equipment for over 40 years, selling thousands of high quality and reliable machines throughout the UK and exporting to over 50 countries around the world.

Through our nationwide network of service and distribution centres, we off er a complete range of keenly priced drain jetters and accessories that get the job done, are aff ordable within your budget and will continue to operate effi ciently and cost eff ectively for many years.

Standard Drain Jet 03

High Effi ciency Drain Jet 03

High Effi ciency Sapphire Drain Jet 03

Mini Jet (Balls) 04

Plough Jet 04

Rocket Jet 04

High Effi ciency Sapphire Silt Bomb 04

Turbo Jet 05

Chain Flail 05

Root Cutters 05

Primus Rotary Descaling Nozzle 05

Warthog 06

Aquaspin 40mm 06

Standard Jetting Hose 07

Tuff skin 07

Stauff shield 07

Safety Leader Hose 07

ContentsMini Jet Kits 08

Micro Mini Jet Kit 08

Tigers Tails 08

Drain Jet Extension 08

Foot Control Valve 09

High Pressure Guns 09

Gun Safety Shroud 09

P&A Gun Spinning Nozzle 10

Fan & Pencil Jets 10

Jet Pumps 11

Hoverclean 11

Whirlaway 11

Jetting Helmet Set 12

Jetting Safety Boots 12

Safety Sign 12

Safety Burst Discs & Holder 12

Enz© Drain Jets 13-14

Quality Products

Parts & Servicing

General Drain Jet Characteristics Number of holes Pulling Cleaning Surface coverage Descaling ability Unblocking

3 rear Good Good Average Good Poor

3 rear 1 forward Average Average Average Average Good

6 rear Good Good Good Average Poor

Standard Drain Jet

A low cost drain cleaning nozzle suitable for use on most van and trailer mounted drain cleaning machines with ½” jetting hose diameter. Available as both rear facing or rear and forward facing.

Part No Thread Pipe size mm (inches) Flow l/min (gpm) Max pressure bar (psi) Nozzles Nozzle Angle Rotary

056097 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 3r 30o No

056413 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 3r1f 30o No

056582 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 4r 30o No

056583 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 4r1f 30o No

056584 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 6r 30o No

056585 ½” BSP M 75-150 (3-6) 60 (13) 415 (6000) 6r1f 30o No

03

High Effi ciency Drain Jet

Easy to clean high effi ciency stainless steel two piece drain jet with drilled jet holes that produce a more powerful and concentrated jet pattern. The jet body has a ½” BSP female port but it can be supplied with either ½” or ¾” male adaptors to suit most common jet hoses.


056670 ½” BSP F 100-225 (4-9) 100 (22) 700 (10000) 3r 30o No

056671 ½” BSP F 100-225 (4-9) 100 (22) 700 (10000) 3r1f 30o No

056672 ½” BSP F 100-225 (4-9) 100 (22) 700 (10000) 4r 30o No

060133 ½” BSP F 100-225 (4-9) 100 (22) 700 (10000) 6r 30o No

060039 ½” BSP F 100-225 (4-9) 100 (22) 700 (10000) 6r1f 30o No

High Effi ciency Sapphire Drain Jet

Fitted with sapphire inserts, the HE sapphire drain jet can be confi gured with several jet patterns to suit your task. Most popular is the 3 rear 1 forward and the 6 rear off ering blocking and cleaning power superior to any other similar nozzles.


0561126 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 3r 30° No

0561126 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 3r1f 30° No

0561126 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 6r 30° No

0561126 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 6r1f 30° No


04

Mini Jet (Ball) For use with ¼” mini jet hoses these jets are ideal for cleaning small bore pipework, sink wastes and pipes with tight bends.

The nozzles are available as a 3 rear jet or 3 rear 1 forward and can also be bought as part of a mini jet kit complete with the jetting hose.


056126 ¼” BSP M 50-100 (2-4) 40 (9) 415 (6000) 3r 30o No

056412 ¼” BSP M 50-100 (2-4) 40 (9) 415 (6000) 3r1f 30o No

Plough JetFitted with two rear facing fan jets the small plough jet nozzle is great for desilting drains and sewers. The heavy brass construction keeps the jet fi rmly planted in the base of the pipe where the silt deposits collect and blasts them back towards the manhole. A larger version with 4 jets is available for the more powerful Flowplant machines.


056044 ½” BSP F 100-300 (4-12) 60 (13) 415 (6000) 2r 2 @ 15o No

056042 ¾” BSP F 225-450 (9-18) 100 (22) 350 (5000) 4r 2 @ 15o / 2 @ 30o No

Rocket JetThe rocket jet is ideal for desilting and cleaning larger diameter sewers with smaller trailer and van mounted jetting units. Like a plough it sits in the bottom of the pipe but additional jets provide cleaning power towards the pipe crown making it a versatile tool.


056845 ½” BSP F 150-450 (6-18) 60 (13) 415 (6000) 4r 4 @ 15o No

056041 ¾” BSP F 225-450 (9-18) 100 (22) 350 (5000) 8r 8 @ 15o No

High Effi ciency Sapphire Silt Bomb

The HE sapphire silt bomb is a desilting nozzle and a perfect partner for van and trailer mounted jetting units for cleaning in larger diameter pipes. The fl at rear angle maximises the pulling power of the nozzle and keeps the jet stream at the bottom of the pipe where silt deposits collect.


0561127 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 3r 30° No

0561127 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 3r1f 30° No

0561127 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 6r 30° No

0561127 ½” BSP F 100-225 (4-9) 100 (22) 350 (5000) 6r1f 30° No

05

Turbo JetThe turbo jet is a rotating nozzle and is excellent for the removal of hard scale deposits. It can be used at up to 690 bar (10,000 psi) but it will provide a good standard of clean anywhere from 280 bar (4,000 psi) upwards. The front mounted pulling ring allows a draw rope to be attached so that the turbo can be winched back and forward through the pipe until the required standard of clean has been achieved.


056323 ½” BSP F 100-225 (4-9) 60 (13) 700 (10000) 2r 2 @ 15o Yes

Chain FlailDesigned to remove light scale and roots, the Spider 50 is a low cost chain fl ail with drive jets and a water lubricated bearing. It is suitable for use on most small and medium jetting units up to 350 bar and operates in pipes from 80 to 150mm diameter. The rotor can be fi tted with replaceable chain links or wire brushes.

The larger Spider 60 is designed for pipes up to 225mm and works well on machines up to 300 bar.


056982 ½” BSP F 80-150 (3.5-6) 60 (13) 350 (5000) Chain link N/A Yes

056725 ¾” BSP F 150-225 (6-9) 80 (17) 300 (4300) Chain link N/A Yes

Root Cutter Saw This powerful saw blade root cutter can power through the toughest tap roots in drains up to 225mm diameter. It comes in its own carry case with tools and 3 skids (100, 150 and 225mm) and it can be powered by any jetter providing 50-70 l/min at only 140 bar.


056981 ½” BSP F 100-225 (4-9) 70 (15) 140 (2000) Saw blade N/A Yes

056989 N/A 100 (4) N/A N/A Saw blade N/A Yes



Primus Rotary Descaling Nozzle The Primus descaling nozzle is a premium quality rotary nozzle. It is fi tted with a unique internal ceramic brake that slows the cutting heads rotational speed allowing the 4 ceramic jets to cut into grease and roots blasting them free. Part No Thread Pipe size mm (inches) Flow l/min (gpm) Max pressure bar (psi) Nozzles Nozzle Angle Rotary

0561125 ½” BSP F 80 - 200 (3-8) 40 -75 (9-16) 350 (5000) 4r1f 4r @ 45° / 1f @ 15° Yes

056949 ½” BSP F 80 - 200 (3-8) 40 -75 (9-16) 350 (5000) 4r1f 4r @ 45° / 1f @ 15° Yes


06

Aquaspin 40mm The Aquaspin is a 40mm diameter rotary jet suitable for descaling and general cleaning in pipes up to 225mm in diameter. It has a very high working pressure and has even been used on high pressure machines for cutting out damaged liners. The rotary body can be had with either 4 jets at 90o which is excellent for cleaning hard deposits from the pipe wall or 2 jets at 90o and 2 jets at 45o making it ideally suited for cleaning and pulling longer distances.


056645 ½” BSP F 100-225 (4-9) 90 (20) 1000 (14500) 7 3 fi xed, 4 @ 45o Yes

056653 ½” BSP F 100-225 (4-9) 90 (20) 1000 (14500) 7 3 fi xed, 4 @ 90o Yes

Part No Thread Size mm Type

A140646 M4 0.9 Sapphire


056657 M4 1.1 Sapphire








Jet InsertsPart No Thread Size mm Type










056676 M6 Blank Stainless Steel

Warthog

The popular Warthog nozzle provides consistent and powerful cleaning performance. The slow speed controlled rotation allows the jet stream time to blast at the blockage clearing everything from soft scale to soft bulky blockages and grease deposits.


056707 ½” BSP F 100-225 (4-9) 30 (7) 350 (5000) 2r1f 2r @ 15o / 1f @ 30o Yes

07

Safety Leader Hose Supplied as a 3m length of blue coloured hose the leader hose connects directly to the end of the main jetting hose and acts as a warning to the operator that the jetting nozzle is close to the manhole entry and care should be taken. For nozzles with a female port use 0551616 directly into the port to avoid long connecting ferrules.

Part No Thread Outer Cover Length m (ft) Hose bore mm (inches) Flow l/min (gpm) Max pressure bar (psi)

055998 ⅜ ” BSP F x ⅜ ” BSP M Rubber 3 (10) 9.5 (3/8) 40 350 (5000)

055093 ½ ” BSP F x ½” BSP M Rubber 3 (10) 12.5 (1/2) 72 350 (5000)

0551616 ½ ” BSP M x ½” BSPT M Rubber 3 (10) 12.5 (1/2) 72 350 (5000)

Stauff shield

The Stauff shield UHMW hose represents the latest rubber technology and delivers substantially better wear resistance, less weight and very low friction levels all adding up to a highly versatile long lasting hose with all the fl exibility associated with softer rubber products. Tests have shown that when compared to standard jetting hose, the Stauff shield showed no measureable wear even after 1,000,000 rubbing cycles (EN ISO 6945). The hose also travels longer distances when compared to standard rubber types.


0551580 ½” BSP F UHMW Rubber 90 (300) 12.5 (½) 72 350 (5000)

0551623 ½” BSP F UHMW Rubber 30 (100) 12.5 (½) 72 350 (5000)

Tuff skin

A new Tuff skin lightweight thermoplastic sewer jetting hose weighing 50% less than standard rubber hose and with a signifi cantly longer jetting life. The Tuff skin has super smooth outer and inner covers allowing for runs of over 200m with a Harben jump jet kit system and minimal pressure drop giving much greater jetting power at the drain cleaning nozzle.


0551229 ½” BSP F Tuff skin Thermoplastic 90 (300) 12.5 (½) 72 350 (5000)

Standard Jetting Hose A standard wire reinforced rubber hydraulic hose assembly meeting BS EN 1829:2 suitable for sewer jetting applications. Available in shorter lengths to avoid the need to replace 90m when damaged.


055021 ½” BSP F Rubber 90 (300) 12.5 (½) 72 350 (5000)

055018 ½” BSP F Rubber 60 (200) 12.5 (½) 72 350 (5000)

055015 ½” BSP F Rubber 30 (100) 12.5 (½) 72 415 (6000)

Main Jetting Hose


08

Drain Jet ExtensionThe drain jet extension is vital safety equipment and must be connected between the jetter nozzle and safety leader hose when jetting in larger diameter sewers or culverts. Choose a size that is at least equal to the diameter of the pipe being cleaned to stop the possibility of the jet nozzle turning in the pipe and heading back towards the operator.

Part No Thread Length m (inches) Max pressure bar (psi)

033085 ½” BSP F x ½” BSP M 0.20 (9) 350 (5000)

033086 ½” BSP F x ½” BSP M 0.30 (12) 350 (5000)

033087 ½” BSP F x ½” BSP M 0.45 (18) 350 (5000)

Mini Jet KitThe ¼” bore mini jet kits come complete with a small ball jet suitable for travelling around the tight bends encountered in gulleys and traps. They are available with either 3 rear or a 3 rear 1 forward confi guration suitable for unblocking chokes. The adaptor supplied allows the mini jet kit to be connected directly to the ½ ” safety leader hose.

Part No Thread Length m (ft) Pipe size mm (inches) Flow l/min (gpm) Max pressure bar (psi) Nozzles Nozzle Angle Rotary

023220 ¼” BSP M 6 (20) 50-100 (2-4) 40 (9) 415 (6000) 3r1f 3r @ 30o, 1f No

023227 ¼” BSP M 6 (20) 50-100 (2-4) 40 (9) 415 (6000) 3r 3r @ 30o No

023275 ¼” BSP M 15 (50) 50-100 (2-4) 40 (9) 415 (6000) 3r 3r @ 30o No

Micro Mini Jet Kit The 5mm bore micro mini jet kit comes complete with a small button jet suitable for travelling around the tight bends encountered in urinal waste pipes and other small bore drainage systems. The kit comes with an adaptor so that it can be connected directly to the ½” safety leader hose.

Part No Thread Length m (ft) Pipe size mm (inches) Flow l/min (gpm) Max pressure bar (psi) Nozzles Nozzle Angle Rotary

032601 ⅛ ” BSP F 6 (20) 25-50 (1-2) 30 (6) 300 (4300) 3r1f 3r @ 30o, 1f No

Tiger Tail Supplied as a 0.9m length of fl exible smooth yellow polyethylene hose with special inserts and hard wearing black spirals this “Tiger Tail” hose feed guide protects the high pressure jetting hose as it passes around tight bends and manhole exits. Complete with a guide rope it is easy to use and aids placement of the jetting nozzle into the drain entrance. It is available in two sizes accepting nozzles up to 50mm and 75mm in diameter.

Part No Outer Cover Length m (ft) Bore size mm (inches)

0551443 PE 0.9 (3) 50 (2)

055147 PE 0.9 (3) 75 (3)

09

High Pressure Guns

Harben high pressure dump guns are the safest way to control hand jetting applications. The dump barrel system prevents pressure being trapped in the gun when the trigger is released therefore stopping dangerous accidental discharges. The pressure barrel can be fi tted with a variety of cleaning nozzles for applications such as cleaning manholes, forecourts or other large fl at areas. A shoulder stock kit (7001931) is available to help the operator safely control reaction forces and the gun should always be used with a safety shroud (7001679) to protect against hose bursts. The gun complies with BS EN 1829:1.

Part No Thread Barrel Confi guration Max pressure bar (psi) Flow l/min (gpm)

031040 ½” BSP M High pressure/Dump 415 (6000) 54 (12)

033355 ½” BSP M High pressure/Dump 1000 (15000) 100 (22)

7001931 N/A Shoulder stock N/A N/A

Foot Control ValveThe mechanical foot control valve enables the operator to control the fl ow of water to the jet whilst remote from the jetting unit. The valve is connected into the high pressure supply line and is fi tted with an inlet, outlet and dump port.

Part No Thread Confi guration Max pressure bar (psi) Flow l/min (gpm)

031043 ½” BSP M In/Out/Dump 415 (6000) 72 (16)

033274 ½” BSP M In/Out/Dump 700 (10000) 100 (22)

033318 ½” BSP M In/Out/Dump 1000 (15000) 100 (22)

Gun Safety Shroud

The gun safety shroud 7001679 can be retro-fi tted to all Flowplant MkII guns (031040). It is manufactured from twin sleeve super de-aerated Polyamide 6. The sleeve material has been tested and approved to international standards and has been found to be very eff ective in reducing the concentrated stream of pinhole leaks. Other shrouds are available to suit pressure washers and smaller jetting machines.

Part No Description Thread Length m Max pressure bar (psi) Flow l/min (gpm)

7001679 MkII Gun shroud ⅜ ” BSP F x ½ ” BSP M 3 415 (6000) 54 (12)

7001905 Dry shut gun shroud (hot water) ⅜ ” BSP F x ⅜ ” BSP M 3 200 (3000) 40 (9)

7001687 Dry shut gun shroud (cold water) ⅜ ” BSP F x ⅜ ” BSP M 3 200 (3000) 40 (9)


10

Fan & Pencil Jets Fan and pencil jets are used in numerous applications and are chosen to suit the particular fl ow and pressure of your machine and accessory. Fan jets produce a fl at 15o fan shaped pattern suited to quick cleaning of lightly soiled surfaces. The pencil (or HV) jets are far more concentrated forcing all the jet power over a smaller cleaning area and they are capable of removing much harder deposits. To check the correct nozzle size for your jetter please visit www.fl owplant.com/drain-sewer/accessories/

Part No Size Thread Flow l/min (gpm) Max pressure bar (psi) Nozzle Angle

056001 1502 ¼ ” NPT M Use jet sizer 700 (10000) 15o












N08490 1.0mm ¼ ” NPT M Use jet sizer 700 (10000) 0o














P&A Gun Spinning Nozzle There are many diff erent types of spinning jets for guns but the P&A is simple, eff ective and low cost. The spinning pencil jets produce a high pressure cone that cleans eff ectively over a wider path, combining the benefi ts of fan and pencil jets into a powerful cleaning tool. The P&A is a useful addition to any cleaning set up extending the use and productivity of your jetting gun.

Part No Thread Flow l/min (gpm) Max pressure bar (psi) Nozzles Nozzle Angle Rotary

056326 ½ ” BSP F 60 (13) 415 (6000) 2f 2 @ 15o Yes

11

Hoverclean

The Harben Hoverclean fl oor cleaner is perfect for jet cleaning large fl at surfaces quickly and safely. It can operate at up to 420 bar and it is ideally suited to Flowplant’s range of 30hp plus jetting machines. Stadiums, garage forecourts and artifi cial running tracks are just some of the areas that can be brought back to pristine condition by the Hoverclean.

Part No Ports Selector Valve Cleaning width m Max pressure bar (psi) Flow l/min (gpm)

023228 ½ ” BSP M High pressure/Dump 0.7 350 (5000) 54 (12)

Jet Pumps

A simple and very eff ective venturi type pump that will work directly off the main jetting hose. The Harben jet pump will handle any solids small enough to enter the inlet tube and with no moving parts there is very little to wear out. It is ideal for removing water from fl ooded manholes or basements and even a small van pack jetter can drive a 40mm version pumping up to 230 l/min a height of 5m through 9m of delivery hose.

Model Jetting Unit Input Jet Pump Output (typical)

mm (inches) Part No Pressure bar (psi) Flow l/min (gpm) Output l/min (gpm) Pumping height m (ft) Delivery hose length m (ft)

75 (3) 012075 280 (4000) 90 (20) 385 (85) 8 (26) 11 (35)

75 (3) 012075 280 (4000) 90 (20) 680 (150) 6 (20) 11 (35)

50 (2) 039001 280 (4000) 54 (12) 250 (55) 7 (23) 11 (35)

50 (2) 039001 280 (4000) 54 (12) 320 (70) 5 (17) 11 (35)

40 (1.5) 032121 200 (3000) 45 (10) 200 (45) 7 (23) 9 (30)

40 (1.5) 032121 200 (3000) 45 (10) 230 (50) 5 (17) 9 (30)

Approximate output loss of 75 litres/m (5 g/ft) delivery hose

Whirlaway

The Whirlaway fl oor cleaner can be used on both dump type and dry shut systems making it an ideal accessory for smaller pressure washers. It can operate with water at up to 80c and can be used for removing oil, chewing gum and other stubborn deposits from fl oors. Smaller or larger versions are available.

Part No Ports Selector Valve Cleaning width m Max pressure bar (psi) Flow l/min (gpm)

057102 ⅜ ” BSP M High pressure 0.45 280 (4000) 30 (6.5)


12

Safety Burst Discs & Holder

Safety burst discs are designed to rupture if the working pressure of the jetter rises signifi cantly above the maximum working pressure, such as might occur when a jetting nozzle becomes blocked. A stock should always be kept with the jetter and only genuine replacement parts should be used in the pressure disc holder.

Part No Pressure bar (psi) Colour

011019 125 (1800) Yellow

011020 140 (2000) Blue

011021 175 (2500) Red

011022 200 (3000) Purple

011045 240 (3500) Green

011046 280 (4000) White

011047 350 (5000) Black

011107 415 (6000) Orange

013043 Pressure disc holder

Jetting Safety Boots

These jetting boots have been specially designed to withstand a water jet up to 800 bar (11,600 psi) accidentally passing over the top of the foot (metatarsal), an area that is left exposed by many other wellington boot designs. Such accidents can happen when using a jetting gun for washing down or surface cleaning. They are resistant to oils, petrol, dilute acids and alkalis and have a slip resistant sole and energy absorbing heel. The boot is designed to meet EN345-54 and DIN 2 3329.

Part No Description

065076 Metatarsal safety boots size 6




Part No Description




Safety SignThis 340mm x 500mm foldable water jetting safety sign warns against unauthorised entry into the prohibited jetting zone and meets current Water Jetting Association guidelines. Tough nylon eyelets make it easy to secure in place with ties or bungie straps.

Part No Description

061054 Safety Sign (WJA)

Jetting Helmet Set

This complete fully adjustable helmet set is designed to provide high pressure water jetting operators with the highest level of face and head protection. In line with the Water Jetting Association Code of Practice the helmet is fi tted with a visor, chin guard and ear muff s.

Part No Description

065013 Complete Helmet Set

Enz Chain Flail The Enz Chain Flail uses highly effi cient turbine technology to spin the high speed rotor with minimal fl ows right down to 30 l/min. This means that root cutting and pipe descaling can now be carried out with the smallest machines in the Flowplant range enhancing productivity to levels not seen before. (See video clip on website) Part No Description Thread Pipe size Flow l/min Max pressure Nozzles Insert Nozzle Rotary mm (inches) (gpm) bar (psi) Type Angle

0561052 Turbine Chain Flail ½ ” BSP F 60-200 (2.5-8) 30 (7) 350 (5000) Flails Ceramic-steel ~ Yes

Advantages of Enz high effi ciency drain jets

Up to 3 times more cleaning power from the same jetter

Can clean longer drain runs with the same jetter

Replaceable inserts give longer life

Uses less water - can be jetted to give same cleaning power as a standard drain with less water usage

Faster turnaround time on job sites

Better camera survey results

More productive and more invoiced jobs per day

There are many diff erent kinds of Enz nozzles and here we have detailed those that are most popular with our customers for use on van pack and trailer mounted machines.

13

Enz Gliding Nozzle The Enz Gliding nozzle is designed to clean the entire surface of pipes from 80 to 400mm diameter. The unique extended hose clip forces the jet to hug the pipe wall keeping the cleaning jet in very close contact with the surface. The result is an extremely good level of clean with the minimum of fl ow rates. (See video clip on website) Part No Description Thread Pipe size Flow l/min Max pressure Nozzles Insert Nozzle Rotary mm (inches) (gpm) bar (psi) Type Angle

0561055 Gliding Nozzle ¼ ” BSP F 80-400 (3-16) 10 (2.5) 350 (5000) 2r, 1@90o Ceramic-steel ~ Yes

0561056 Spare hose clip


14

Enz Rotodrill The Enz Rotodrill is perfect for drilling through blockages with its clever rotary forward facing jet. Driven up to the blockage by 6 powerful rear facing ceramic nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale. It is also ideal for cutting up and shredding tissue and fat deposits. (See video clip on website) Part No Description Thread Pipe size Flow l/min Max pressure Nozzles Insert Nozzle Rotary mm (inches) (gpm) bar (psi) Type Angle

0561100 Rotodrill ½ ” BSP F 50-150 (2-4) 50 (11) 350 (5000) 6r, 1f@7o Ceramic-steel ~ Yes

Enz Rotopuls The Enz Rotopuls nozzle is designed with an off centre rotor that makes the complete nozzle vibrate at high frequency when being used in plastic, steel or concrete pipes. (See video clip on website). The vibrations are so strong that hard scale deposits can be fractured and then fl ushed free by the water jets. NB. The high vibration forces developed by the Rotopuls can damage fragile pipes e.g. clay, thin wall plastic or badly bedded PVC. Part No Description Thread Pipe size Flow l/min Max pressure Nozzles Insert Nozzle Rotary mm (inches) (gpm) bar (psi) Type Angle

0561099 Rotopuls ¼ ” BSP F 50-100 (2-4) 30 (7) 350 (5000) 3r, 2@90o Ceramic-steel ~ Yes

Nozzle Insert Sizes

North01709 838 [email protected]

South East020 8591 [email protected]

South West (& Ireland)01722 325 [email protected]

Scotland0141 429 [email protected]

Our nationwide network of servicecentres and mobile engineers arealways on hand to offer expert adviceon all aspects of maintaining yourwater jetting systems, pumps andequipment. A full range of spares isreadily available within 24 hours.

Our Service Division can advise you oryour engineering staff plus undertakeservicing, repairs and remedial work inthe field, from our fleet of mobile vans,or at our service centres.

We offer a range of servicing andmaintenance packages to suit your requirements, ensuring yourequipment is always operating reliably,efficiently and safely.

Servicing & Maintenance

FLOWPLANT

FLOWPLANT GROUP

Gemini House, Brunel Road, Churchfields Industrial Estate,Salisbury, Wiltshire SP2 7PU

Tel: +44 (0)1722 325 424, Fax: +44 (0)1722 411 329,[email protected], www.flowplant.co.uk

Whatever you need to successfully run your jetting business, you can depend on Flowplant.

Technical Hotline: 01722 344 091 Enquiries: [email protected]

Flowplant standard terms and conditions of sale apply.Flowplant standard terms and conditions of sale apply.

Due to our policy of continued improvement, Flowplant Due to our policy of continued improvement, Flowplant reserves the right to change prices and reserves the right to change prices and specifi cations without notice.specifi cations without notice.

Visit the Flowplant website to view the wide range of high pressure water jetting equipment we manufacture, links to brochures, manuals and online videos.

www.fl owplant.co.uk

Documents

FOCUS ON JETTING DRAIN CLEANING ACCESSORIES€¦ · Standard Drain Jet A low cost drain cleaning nozzle suitable for use on most van and trailer mounted drain cleaning machines with