FOOD GRADE PRODUCTS 1NSF & INS Categories FOOD … · Temperature range -50°C to +280°C Halal and Kosher certified Roto-Tech Semi-fluid synthetic lubricant fortified with graphite

1

FOOD

GRA

DE PR

ODUC

TS

FOOD LUBRICANTSNSF & INS Categories1

T 01822 855 885 F 01822 855 882 E [email protected]

FOOD

GRA

DE PR

ODUC

TS

CONTENTS FOOD LUBRICANTS

SECTION 1: FOOD LUBRICANTS Pages

NEW TECH LUBES

Bearing Greases 3

Oxygen Compatible Grease 4

Chain Fluids 4

Cleaners & Degreasers 4

Chain Lubricants 5

Gear & Hydraulic Fluids 6

Airline & Compressor Fluids 6

Anti-Seize Assembly Lubricants 7

General Maintenance 7

PETRO-CANADA

Chain Lubricants 8

Gear, Hydraulic & General Lubricating Fluids 8

Airline & Compressor Fluids 8

Foodlube General Purpose 9

Greases 10

TYGRIS PROTEAN FOOD AREA RANGE 11-16

LPS DETEX FOOD AREA RANGE 17-18

ACTIVATE AEROSOLS RANGE 19-20

AMBERSIL FOODLUBE GENERAL PURPOSE PRODUCTS 21-25

FOOD GRADE SEALANTS 26

METAL DETECTABLE PRODUCTS 27

FOOD SAFE WIPES 28

TITLE

T 01822 855 885 F 01822 855 882 E [email protected] 3

FOOD

GRA

DE PR

ODUC

TS

NEW TECH LUBES RANGE BEARING GREASESDescription

FS Trojan GreasePTFE and unique SEPS anti-wear package makes this product an excellent all round high load/high temperature white synthetic grease. Being highly water resistant (will not wash off), this product is suitable for both rolling element and plain bearings, chains, slides and pivot points. Ideal for centralised lubrication systems. Available in grades NLGI 000 to NLGI 2.INS H1 RegisteredTemperature range -40°C to 240°C (PTFE will go to +350°C)

Halal and Kosher certified

FS Extra GreaseSynthetic non-melting PTFE grease with a wide temperature range used to lubricate bearings, chains and slides. Hydrophobic base oils make it ideal for use in wet and humid environments. Its wide operating temperature range means it can be used to lubricate freezer applications down to -40°C. FS Extra is colourless and odourless making it very clean in use. Will not wash off. Available in grades NLGI 000 to NLGI 2.INS H1 RegisteredTemperature range -40°C to +340°C


F.S.W. GreaseWhite mineral oil based grease used for all tough duty rolling element bearings in food production areas particularly where water ingress is a problem. INS H1 RegisteredTemperature range -10°C to +130°C (+150°C for short periods)


FS GlacierA very low temperature and/or high speed grease. FS Glacier has a synthetic base oil with a pour point of -60°C. It is ideal for use in blast freezers, spiral chillers and cold wet environments. Can be used in bearing applications of light to moderate load. Odourless, colourless and tasteless.INS H1 RegisteredTemperature range -60°C to +180°C


FS Sill-Tech GreaseUsing pure silicon oil this clean, translucent non-melting grease has many applications including lubricating slides and pivot points and lightly loaded bearings. Also used to lubricate and locate o-rings, prevent the ingress of water into electrical equipment and create non-stick surfaces on hot melt glue machines. INS H1 RegisteredTemperature range -50°C to +280°C


Roto-TechSemi-fluid synthetic lubricant fortified with graphite and MoS², specifically designed for use in rotary rack oven bottom bearings. The product coats the lower support bearing with a dry solid lubricant film effective up to 650°C. Warm product before use.We have also developed a special cartridge and gun system which means you can use this grease on oven bearings cold and with no mess.

Pack Size

400ml Aerosol400g Cartridge400g Lube Shuttle1kg Pot5kg Tub12.5kg Pail

200ml Aerosol400ml Aerosol400g Cartridge400g Lube Shuttle85g Tube500g Pot 5kg Tub12.5kg Pail

400g Cartridge5kg Tub12.5kg Pail

400g Cartridge400g Lube Shuttle5kg Tub12.5kg Pail

400g Cartridge100g Tube500g Pot 5kg Tub12.5kg Pail

400g Cartridge Lube Shuttle Cart 2kg Tin

Part Code

106001060110602106031060410605

10460 10461 10463 10464 10462 10465 10468 10469

10620 10621 10622

10500 10501 10502 10503

10580 10581 10582 10584 10585

109001090110902


FOOD

GRA

DE PR

ODUC

TS

NEW TECH LUBES RANGE OXYGEN COMPATIBLE GREASEDescription

FS Dura-Tech A perfluoroether based product which uses the latest grease technology and technical developments to deliver high performance under the most extreme conditions of load and temperatures. Dura-Tech is NON-TOXIC making it safe to use in food and pharmaceutical production areas. Safe to use in oxygen rich atmospheres such as diving equipment. Ideal for use in hard to access areas and sealed for life applications due to its ability to resist breakdown and outlive most other products on the market.• Outstanding chemical resistance • Very low friction coefficientINS H1 RegisteredTemperature range: -25°C to +300°C


Aqua-GA high purity graphite dispersion in water specially designed to eliminate the risk of fire in bakery tunnel ovens. Aqua-G penetrates where it is most needed and keeps the chains free and mobile without the build up of wet and sticky deposits. Aqua-G can be applied to hot chains but is best applied when chains are cool allowing better penetration of graphite fluid to pins and links.Operating temperature up to 650°C

FS Chain-CoatDesigned for use in wet environments, FS Chain-Coat is a semi-synthetic, water-clear, odourless, tasteless and food safe lubricant. It will penetrate into difficult areas, displace water and lubricate. It contains additives that will resist wash-off and over time will create a highly adhesive coating, protecting metal surfaces from corrosion.INS H1 Registered


Citro-TechSpecially formulated water based hard surface cleaner, perfect for the removal of heavy grease deposits from floors and other working areas. Can also be used as an effective label remover. Containing natural citric extracts, it has a pleasant odour and is very safe to use. Can be diluted with up to 40 parts water, depending on the severity of soiling.

FS DegreaserAn all purpose cleaner designed for food production areas. It is fully H1 registered for use where incidental contact may occur. FS Degreaser is low odour and fast evaporating, leaving no residue or deposits behind. It can safely be used on all surfaces including machinery, worktops and floors. INS A1 Registered


FS Elec-TechA highly refined solvent cleaner and lubricant for use on electrical components. Registered as food safe (H1 approved) it does not contain any chlorinates, has low odour and is clean in use. It can also be used for degreasing metals, plastics and painted surfaces. Ensure power is switched off before use.INS H1 Registered


Pack Size

10ml Syringe200g Tube600g Cartridge 800g Cartridge1kg Pot

25kg Pail

5 Litre25 Litre

500ml Aerosol 5 Litre 25 Litre

400ml Aerosol 5 Litre 25 Litre

400ml Aerosol

Part Code

1024010241102421024310244

10110

10330 10331

11170 10181 10182

10430 10431 10432

10450

CHAIN FLUIDS

CLEANERS & DEGREASERS


FOOD

GRA

DE PR

ODUC

TS

NEW TECH LUBES RANGE CHAIN LUBRICANTSDescription

FS Chain-Tech High viscosity synthetic oil with PTFE. For use in food production areas and/or in wet, humid conditions. Excellent for plastic guides and chains.INS H1 Registered Temperature range -40°C to +340°C


FS Extra Spray Fully synthetic food safe grease using the latest technology of anti-oxident, EP and PTFE blends. It is totally resistant (hydrophobic) to both fresh and salt water and completely non-melting, making it an ideal grease for wet or steamy areas. FS Extra is sprayed as a thin penetrating fluid which thickens inside bearings and chains reforming to a fully rated No.2 H1 grease. INS H1 Registered Temperature range -40°C to +340°C


FS Lube-Flow Food Safe synthetic, clear, odourless and tasteless oil. It will operate in wet and humid conditions such as those found in prover ovens and abattoirs. FS Lube-Flow is designed to lubricate chains, pins and pivot points and makes the perfect all round general purpose lubricant.INS H1 Registered Temperature range -60°C to +260°C


FS Lube-Flow with PTFELubricating fluid similar in nature to FS Lube-Flow but of a high viscosity to reduce fling on chains and offer a higher load rating. Translucent and odourless it is clean and safe in use.INS H1 RegisteredTemperature range -32°C to +232°C


FS Techno-Carb Super 2A fortified synthetic lubricant for chains and conveyors operating at temperatures up to 300°C. This gives excellent load carrying properties and resistance to corrosive atmospheres. Techno-Carb Super 2 is very adhesive to metal surfaces even in the presence of large amounts of water. This can also be used as a very effective high temperature bearing lubricator for bakery oven trolley wheels.INS H1 RegisteredTemperature range -32°C to +250°C


Pack Size

400ml Aerosol

200ml Aerosol 400ml Aerosol

400ml Aerosol 250ml Bottle 5 Litre 25 Litre

250ml Bottle 5 Litre 25 Litre

5 Litre25 Litre

Part Code

10340

10460 10461

10550 10551 10552 10553

10560 10561 10562

5 Litre 25 Litre

Did you know - we can design and manufacture special lubricants for your specific application?


FOOD

GRA

DE PR

ODUC

TS

NEW TECH LUBES RANGE GEAR AND HYDRAULIC FLUIDSDescription

FS-GL Gear Oil Range A specially designed range of food safe synthetic PAG based gear oils for use on gears operating at elevated temperatures. Excellent anti-corrosion properties protect the gears in hostile environments. Available in 150, 220, 320 and 460 grade.INS H1 RegisteredTemperature range -30°C to +250°C


FS Clear-Gear A range of fully synthetic gear oils with viscosities from 150cst to 1500cst. Based on synthetic base oil, this range offers a wide operating temperature range, excellent stability and protection against corrosion and wear. FS Clear Gear oils are water white and virtually odourless. They can also be used to lubricate chains and slides. Resistant to emulsification with water.INS H1 RegisteredTemperature range -48°C to +250°C


FS Hydraulic OilFully synthetic long life hydraulic oils from grades 32 to 100. They have a wide operating temperature range and are very stable. FS Hydraulic Oil can be used as a general purpose lubricant on chains and pivot points.INS H1 RegisteredTemperature range -54°C/-32°C to +240°C


Pack Size

5 Litre25 Litre5 Litre25 Litre5 Litre25 Litre5 Litre25 Litre



ISO VG 150

ISO VG 220

ISO VG 320

ISO VG 460

ISO VG 150

ISO VG 220

ISO VG 320

ISO VG 460

ISO VG 32

ISO VG 46

ISO VG 68

ISO VG 100

Part Code

10260 10261 10270 1027110280 10281 10290 10291

10350 10351 10360 1036110370 10371 10380 10381

10510 10511 10520 1052110530 10531 10540 10541

AIRLINE AND COMPRESSOR FLUIDSFS Airline OilA clear, odourless, tasteless fluid designed to lubricate and prevent internal corrosion of pneumatic equipment in a food environment. As FS Airline is fully synthetic it eliminates the release of mineral hydrocarbon mist (potentially carcinogenic) into the atmosphere when used air is discharged.INS H1 Registered


FS Comp Tech A range of fully synthetic long life compressor oils for use in food production areas. Can also be used as a general purpose lubricant.INS H1 Registered


5 Litre25 Litre

5 Litre 25 Litre5 Litre 25 Litre5 Litre 25 Litre

1030010301

1040010401 1041010411 1042010421

46 Grade

68 Grade

100 Grade

Did you know we can also supply most types of oil filter?

TITLE


FOOD

GRA

DE PR

ODUC

TS

NEW TECH LUBES RANGE ANTI-SEIZE ASSEMBLY LUBRICANTSDescription

FS Anti-Seize A synthetic, white paste containing a high percentage of food safe solid lubricants. Used as an aid to the assembly and disassembly of components and threaded fasteners. If will also protect against water ingress and corrosion.INS H1 Registered Temperature range -32°C to +350°C


FS Ease Food Safe dismantling fluid to aid disassembly of seized components. Displaces water and leaves a hydrophobic coating protecting against future corrosion. FS Ease can also be used to loosen and remove grease deposits on surfaces and as a light lubricant.INS H1 Registered


Pack Size

100g Tube 500g Pot 5kg Tub 12.5kg

400ml Aerosol5 Litre 25 Litre

Part Code

10310103111031310314

1044010441 10442

FS Sill-TechA clean, multi-use, non-staining silicone lubricant designed to give non-stick properties and provide light lubrication to delicate mechanisms. Standard viscosity 50cst. Can be supplied in viscosity ranges from 5cst to 300,000cst.INS H1 Registered Temperature range -20°C to +250°C


FS Lube-Flow Clear Food Safe synthetic, clear, waterproof spray oil. Ideal for general purpose lubrication of any moving parts especially on food machinery.INS H1 RegisteredTemperature range -48°C to +250°C


FS Belt-Tech Food safe anti-slip belt dressing. Reduces slippage on start up under high load and wet conditions.INS H1 Registered


FS Multi-Lube Fluid FS Multi-Lube is a synthetic odourless tasteless food safe oil containing PTFE that can be used to lubricate chains, pivot points and delicate mechanisms. FS Multi-Lube will displace water and contains hydrophobic oil making it perfect for use in wet areas lubricating and protecting metal surfaces from corrosion.INS H1 Registered


FoodGuard 3HFoodguard 3H is an INS 3H and H1 registered direct contact approved grease. Developed using FDA approved ingredients to provide the safest possible lubricant for situations where direct contact with food is a high possibility. Typical applications for use on depositor pistons, mincing blades, meat trimmers and as a release agent for hooks, loaf pans, boning benches and chopping boards. Also available in grease form.

400ml Aerosol5 Litre25 Litre

400ml Aerosol

400ml Aerosol

500ml Trigger5 Litre

400ml Aerosol

10570 10590 10591

10550

10320

1055410555

10623

GENERAL MAINTENANCE


FOOD

GRA

DE PR

ODUC

TS

PETRO-CANADA RANGE CHAIN LUBRICANTSDescription

Purity FG Chain Fluid - Light, Medium & HeavyPurity FG Chain Fluids are formulated to lubricate all types of drive and conveyor chains as well as bearings found on food processing machinery. They may be applied by brush or drip feed as well as by centralised lubrication systems. They can be applied at temperatures up to 200°C; however, equipment should be re-oiled more frequently at temperatures above 150°C.NSF H1 Registered

Purity FG EP Gear Fluid with SynFXPurity FG EP Gear Fluids are advanced food grade lubricants formulated to deliver exceptional, longer lasting protection of enclosed gear drives (worm, helical, bevel and spur) used in food processing machinery. They can also be used in bearings and chain drives. Purity FG EP Gear Fluids are non-reactive to yellow metals.Available in ISO VG 100, 150, 220, 320 & 460NSF H1 Registered

Purity FG Synthetic EP Gear FluidPurity FG Synthetic EP Gear Fluid is specially fomulated to provide outstanding lubrication in food processing applications running under heavier loads or subject to high or low temperature extremes.Available in ISO VG 220 & 460NSF H1 Registered

Purity FG-X AW Hydraulic Fluid with SynFXPurity FG AW Hydraulic Fluids are advanced food grade lubricants specially formulated to deliver exceptional, long lasting protection in hydraulic systems used in food processing and pharmaceutical operations. They provide excellent performance in high pressure systems including applications operating at more than 1000 PSIAvailable in ISO VG 32, 46, 68 & 100NSF H1 Registered

Purity FG Compressor Fluid with SynFXFor compressors and vacuum pumps. • Outstanding oxidation resistance• 4000 hour service in rotary screw and 1000 hour service in vane compressors• Superb protection against rust and corrosionStrong resistance to sludge and varnish formation promotes reduced downtime.Available in ISO VG 32, 46, 68 & 100NSF H1 Registered

Pack Size

20 Litre 205 Litre

20 Litre205 Litre

20 Litre205 Litre

20 Litre205 Litre1040 Litre IBC

20 Litre 205 Litre

Part Code

PFGCF/20PFGCF/205

PFGGFS/20PFGGFS/205

PFGSG/20PFGSG/205

PFGAWS/20PFGAWS/205PFGAWS/1040

PFGCOMS/20PFGCOMS/205

GEAR, HYDRAULIC AND GENERAL LUBRICATING FLUIDS

AIRLINE AND COMPRESSOR FLUIDS

TITLE


FOOD

GRA

DE PR

ODUC

TS

PETRO-CANADA RANGE FOODLUBE GENERAL PURPOSE PRODUCTSDescription

Purity FG White OilsHigh-quality food-grade white oil (Meets FDA CFR21, Section 172.878 and CFR 21, Section 178.3620 (a)). Colourless, odourless and tasteless food-grade mineral oil. Food-grade white mineral oil well suited for the food processing industry. Registered NSF H1 & 3H, and Kosher and Pareve food safe. White mineral oil available in the following grades: 10, 15, 35, 40, 68, 90.NSF H1 + 3H Registered

Purity FG Trolley FluidPetro-Canada’s PURITY FG Trolley Fluid is a food grade fluid used to lubricate hook and trolley systems in meat processing operations. PURITY FG Trolley Fluid is formulated to deliver tough protection and long service life. It can also be used as a low viscosity lubricating fluid for chains and conveyors, and as a rust protective oil. May be applied by submersing trolleys in a heated fluid tank at temperatures up to 85°C (185°F), by brush or drip feed, or by a centralized lubrication system.Available in ISO VG 46NSF H1 Registered

Purity FG Heat Transfer FluidPURITY FG Heat Transfer Fluid is a food grade fluid that provides high thermal efficiency in systems operating up to 326°C PURITY FG Heat Transfer Fluid’s breakthrough chemistry can assist in extending fluid life longer than leading competitive fluids, and help lower operating costs by reducing the frequency of fluid change-outs.NSF HT1 Registered

Purity FG Seamer-E Fluid Purity FG Seamer-E fluid is a high performance, advanced food grade lubricant specially designed for use in the food canning industry. It is a mineral oil based, water emulsifying fluid that is formulated for use in high-speed continuous lubrication seaming units where contamination of the oil with water, food juices and sugar may occur. It is designed to lubricate the main turrets, bearings, chains and gears for smooth and effective equipment performance.NSF H1 Registered

Need a Pump for your Petro-Canada Pail? Lift Pump for 20 litre Petro-Canada Pails Plastic Lift Pump for transferring most types of oil and non-corrosive fluids. Self priming piston pump approx. 100ml per stroke. Discharge via 1.5mtr hose with positive shut off valve. Designed to fit Petro-Canada 20 litre Pails

Pack Size

20 Litre Pail205 Litre Drum 1040 Litre IBC

20 Litre Pail205 Litre Drum

20 Litre 205 Litre1040 Litre IBC

20 Litre Pail205 Litre Drum

Part Code

PFGWO/20PFGWO/205PFGWO/1040

PFGTF46/20 PFGTF46/205

PFGHTF/20 PFGHTF/205 PFGHTF/1040

FGSEAM-E/20PFGSEAM-E/205

560006

OIL SAMPLING KITSPetro-Canada ‘Lubri-Test’ is a low cost preventative maintenance programme that detects symptoms of impending equipment failure through Used Oil Analysis.The Lubri Test Used Oil Analysis Programme evaluates the condition of your lubricant and equipment on a routine basis and ensures that minor mechanical problems are discovered before they become serious and expensive to fix.


FOOD

GRA

DE PR

ODUC

TS

Description

Purity FG2, FG1 & FG00 GreaseProvides lubrication and pumpability over a wide range of temperatures, along with excellent water washout and spray loss for better equipment protection, resulting in reduced consumption of food-grade greaseAvailable in NLGI 1, 2 & 00NSF H1 Registered

Purity FG2 Synthetic GreasePetro-Canada’s Purity FG2 SYNTHETIC Grease is an advanced food grade grease specially formulated for the toughest food processing applications. It’s advanced chemistry provides outstanding protection against wear and water washout, over a wide range of operating temperatures. Wide temperature grease for excellent wear protection and strong resistance to lubrication breakdown. Operating between -40°C (-40°F) and 200°C (392°F), PURITY FG Synthetic Food Grade Grease also provides higher load-carrying capabilities.NSF H1 Registered

Purity FG2 Synthetic Heavy 220Purity FG2 Synthetic Heavy 220 Grease is an advanced food grade grease specially formulated for the toughest food processing applications. It has strong resistance to lubricant breakdown and water washout in harsh operating environments. Tackified to stay in place Purity FG2 Synthetic Heavy 220 has a lot higher base oil viscosity than the Purity FG2 Synthetic Grease, it is formulated with tackifiers to keep it in place under the most demanding circumstances. It is most suitable for use under heavy loads, and where greases need to stay in place.

Purity FG2 Extreme GreasePURITY™ FG2 EXTREME Grease is a high viscosity, semi synthetic, heavy duty food grade grease specifically formulated for low to medium speed, heavily loaded industrial bearings operating under severe conditions. PURITY FG2 EXTREME exhibits excellent protection in applications subjected to high temperature, high pressure, and heavy loads while operating continuously, such as in animal feed pellet mills and continuous rotary cookersNSF H1 Registered

Purity FG2 with Microl TM Max GreasePURITY™ FG2 with MICROL MAX is an advanced food grade grease specially formulated to deliver excellent performance and food grade purity under the highly demanding conditions of food processing operations.PURITY FG2 with MICROL MAX contains an antimicrobial preservative to protect the lubricant from deterioration, fouling and odour caused by microorganisms. This helps to ensure the lubricant continues to operate as designed despite harsh operating conditions.PURITY FG2 with MICROL MAX has the required industry credentials and fits perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans.NSF H1 Registered

Pack Size

400g Cartridge17kg Pail54kg Lined Keg175kg Lined Drum

400g CartridgeLube Shuttle Cart17kg Pail54kg Lined Keg 175kg Lined Drum

Lube-Shuttle Cart 54kg Lined Keg SPECIAL ORDER PRODUCT

400g Cartridge17kg Pail54kg Lined Keg175kg Lined Drum

400g Cartridge17kg Pail54kg Lined Keg

Part Code

PFG2/400 PFG2/17PFG2/54PFG2/175

PFG2SYN/400PFG2SYN/LSPFG2SYN/17PFG2SYN/54PFG2SYN/175

PFG2SYNH/LS PFG2SYNH/54

PFG2E/400PFG2E/17PFG2E/54PFG2E/175

PFG2MIC/400PFG2MIC/17PFG2MIC/54

PETRO-CANADA RANGE GREASES


FOOD

GRA

DE PR

ODUC

TS

TYGRIS FOOD AREA

Description

Welcome to PROTEAN….ADVANCED SOLUTIONS FOR THE FOOD INDUSTRYWith NSF approval for prescribed use in or around food areas, yet still providing the very best of aerosol power, the Tygris Food Area collection of aerosols makes maintenance in food-processing areas straightforward and efficient.

PROTEAN Fast Drying Solvent CleanerPROTEAN Fast Dry Solvent Cleaner is a NSF: K1 registered, fast drying, solvent cleaner, powerful enough to dissolve away all types of workshop contaminants, leaving no residue and eliminating the need for rinsing.BENEFITS:• NSF: K1 registered for use in non-food processing areas

where there is no possibility of solvent vapours entering a

processing area• Powerfully removes all types of contaminant

• Fast drying• Leaves no residue• Does not contain chlorinated solvents

• Temperature range: -20°C to +65°C

• 360° valve for inverted use

NSF K1 Registered

PROTEAN White GreasePROTEAN White Grease Spray is a NSF: H1 registered spray-formulated water resistant lubricant, ideal for use on roller and needle bearings and chains.BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Contains anti-wear additives for long component life

• Water resistant – suitable where frequent washing down

of equipment is required• Corrosion resistant• Effective to high temperatures• Temperature range: -20°C to +200°C


NSF H1 Registered

PROTEAN Multi-Lube - Foodgrade LubricantPROTEAN Multi-Lube is a general purpose food grade lubricant for use in and around food processing areas, for the lubrication of cables, chains, castors, hinges, bearings and pins.BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Effective over a wide temperature range

• Good water displacement• Good penetration properties• Effective corrosion resistance• Temperature range: -20°C to +200°C


NSF H1 Registered

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

F-400

F-402

F-404

Choose PROTEAN for all your essential cleaning, lubricating and protecting needs and let’s stay healthy together


FOOD

GRA

DE PR

ODUC

TS

TYGRIS FOOD AREA

Description

PROTEAN PropastePROTEAN ProPaste is a spray-formulated tenacious lubricant suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Engineered as an anti-seize paste, PROTEAN Propaste is ideal for the assembly and lubrication of bushes, slides, threads and small open gears and also suitable as a food grade drilling, cutting and tapping lubricant in areas where in-situ repair and maintenance is required.BENEFITS:• NSF registration pending• Highly versatile tenacious lubricant, resists water wash off

• Innovative anti-seize paste for assembly and lubrication

• Suitable for use as a food grade metal working paste

• Ideal for use on stainless steel fasteners

• 360° value for inverted use

NSF H1 Registered

PROTEAN Electrical CleanerPROTEAN Electrical Cleaner is a NSF: K2 registered quick drying solvent cleaner suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Effective in cleaning and degreasing electrical components, PROTEAN Electrical Cleaner leaves no residue thus making for an efficient process without the added chore of wiping off dissolveddirt.BENEFITS:• NSF: K2 registered for use as a solvent for cleaning electronic instruments and devices, which will not tolerate aqueous cleaning solutions in and around food processing areas. Not intended for direct food contact

• Solvent dries off in approximately 1 minute

• Leaves no residue• Safe for use on most plastic or painted surfaces

• Effectively removes grease and dirt


NSF K2 Registered

PROTEAN Chain SprayPROTEAN Chain Spray is a food grade chain spray which is a highly tenacious, anti-fling lubricant designed to keep chain and drive systems operating smoothly. Being non-toxic and water resistant it is ideal when used on food conveyor systems requiring frequent wash down.BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Non-toxic• Water resistant – withstands washing

• Anti-fling for fast moving components

• Highly tenacious – will not drip off

• Anti-corrosion additives• Withstands high temperatures• Temperature range: -20°C to +200°C


NSF H1 Registered

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

F-405

F-406

F-408



FOOD

GRA

DE PR

ODUC

TS

Description

PROTEAN PTFE Dry Film LubricantPROTEAN PTFE Dry Film Lubricant has been engineered for use in food processingenvironments, formulated for use where conventional oils and greases are undesirable due to their dirt attracting nature.BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• PTFE- based lubricant for excellent antistick properties

• Use to lubricate links, pins and slides

• Effective release agent• Non-toxic film• Withstands high temperature• Temperature range: -20°C to +270°C


NSF H1 Registered

PROTEAN Penetrating OilPROTEAN Penetrating Oil is a penetrating and release fluid with anti-corrosion properties which actively penetrates seized components. A residual lubricating film adheres to the released part, facilitating re-assembly and helping prevent further corrosion. Effective over a wide temperature range, the all angle valve allows use in an inverted position. BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Powerful penetration through rust, scale and grime

• Leaves a corrosion resistant

coating• Acts over a wide temperature range

• Temperature range: -20°C to +250°C


NSF H1 Registered

PROTEAN Belt Dressing SprayPROTEAN Belt Dressing is an effective food grade belt dressing spray used to reduce slippage and extend the life of drive belts, increasing transmitted power and improving efficiency and economy. BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• High tack for maximum power transmission

• Reduces belt slippage for less squeal

• Decreases energy costs

• Does not reduce tensile strength

• Effective in damp conditions• Extends belt life• Temperature range: -50°C to +150°C


NSF H1 Registered

PROTEAN Water DisplacementPROTEAN WD Anti-Rust Agent is a PTFE based aerosol effective for use in displacing moisture and water based fluids from most surfaces, leaving a residual film of lubricant. Used on sliding surfaces, in bearings and for other light applications in food processing environments. BENEFITS:• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• PTFE based for effective moisture displacement

• Use for light lubrication• Leaves a film of lubricant• Temperature range: -20°C to +250°C


NSF H1 Registered

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

F-410

F-412

F-414

F-416

TYGRIS FOOD AREA


FOOD

GRA

DE PR

ODUC

TS

TYGRIS FOOD AREA

Description

PROTEAN Silcone Release LubricantPROTEAN Silicone Release is an effective lubricant and release agent for the food industry, used to protect and lubricate a wide range of parts and equipment and for the release of injection moulded parts when traditional oils are not suitable. BENEFITS: • NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Silicone based – an alternative to traditional oils

• Colourless and odourless

• Non-staining and non-tainting• Wide temperature range• Excellent release properties• Temperature range: -20°C to +200°C


NSF H1 Registered

PROTEAN Stainless Steel CleanerPROTEAN Stainless Steel Cleaner is a NSF: A7 registered dual action cleaner and polish suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Available in a convenient spray formulation, PROTEAN Stainless Steel Cleaner has been designed for use on stainless steel, aluminium and chrome and provides a protective coating to aid future cleaning and prevent corrosion. BENEFITS: • NSF: A7 registered for nonfood contact surfaces in and around food processing areas

• For use on metal surfaces • Cleans and polishes in one action

• Restores surface to original lustre

• Non-abrasive – will not scratch• 360° valve for inverted use

NSF A7 Registered

PROTEAN PTFE Foam CleanerPROTEAN Foaming Cleaner is a NSF: A1 registered multi-surface foam cleaner suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Formulated with a foaming action to cling longer to surfaces for improved contact time and effectiveness. BENEFITS: • NSF: A1 registered for use as a general cleaner on all surfaces in an around food processing areas where its use is not intended for direct food contact

• For use on all hard surfaces • Foaming action for longer

contact time• Cuts through grease and grime effectively

• Gentle cleaning action – will not scratch

• Benign cleaning ingredients• 360° valve for inverted use

NSF A1 Registered

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

F-418

F-420

F-422


FOOD

GRA

DE PR

ODUC

TS

Description

PROTEAN Label RemoverPROTEAN Label Remover is a NSF: K3 registered, spray-formulated, label remover suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Effective in the removal of sticky labels from most substrates including many plastics, metals, rubbers, painted surfaces and other impervious materials, leaving no residues or markings.BENEFITS:• NSF: K3 registered for use in removing adhesive or glue from food packaging materials in and around food processing areas, where its use is not intended for direct food contact

• Dissolves gums and adhesives from self adhesive labels

• Suitable for most surfaces• Leaves no residues• High penetrating power• 360° valve for inverted use

NSF K3 Registered

PROTEAN ProtectPROTEAN Protect is a spray-formulated heavy duty wax film, enriched with corrosion inhibitors and suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Providing long term protection against corrosion on metal components and equipment, and resistant to both water wash-off and cleaning, PROTEAN Protect is ideal for use on machined surfaces and assemblies that are subjected to long periods of storage or shipping conditions.BENEFITS:• NSF registration pending• Corrosion inhibitors provide long-term metal protection, even outdoors

• White, clean film for improved coverage visibility

• Tenacious heavy duty wax film – resistant to wash-off and cleaning

• Ideal for use on components and machinery kept in long-term storage

NSF H1 Registered

PROTEAN Shock & ReleasePROTEAN Shock & Release is a spray-formulated fast acting penetrating and dismantling lubricant and suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. Engineered to ‘shock’ components through rapid freezing, PROTEAN Shock & Release quickly penetrates seized and rusted parts, enabling optimum ‘release’ and easy dismantling.BENEFITS:• NSF registration pending• Fast acting Freeze & Release action for easy dismantling of seized, corroded and rusted parts

• Enables rapid and efficient wicking of the lubricant for deep penetration

• Suitable for use on all metals and most common plastics and rubbers

• Released parts remain lubricated and protected from corrosion

• 360° value for inverted use

NSF H1 Registered

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

F-424

F-426

F-428

TYGRIS FOOD AREA


FOOD

GRA

DE PR

ODUC

TS

TYGRIS FOOD AREA

Description

PROTEAN Pure 3H GreasePROTEAN PURE 3H Grease is a non-toxic, wide temperature, multi-purpose grease offering enhanced anti-wear performance for prolonged component life. PROTEAN PURE 3H Grease prevents food products from adhering to surfaces during processing and is suitable for most applications where direct food contact is inevitable.BENEFITS:• NSF: 3H registered: Release agent for direct contact with food

• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Significant wide temperature resistance of -30°C to +120°C

• Exhibits superior EP performance with a 4-ball weld load of 400kg

• Suitable for use as a direct food contact release agent and multi-purpose lubricant

• Ideal for bearings, blades, guides, seals and other sliding

surfaces• Excellent lubrication performance and enhanced oxidative stability for both extending lubrication intervals and reducing lubricant usage

• Improved anti-wear performance helps prolong component life

• Good sealing properties protect against unwanted corrosive contaminants

• Does not contain animal derived materials, nut oils or genetically modified ingredients.

NSF H1 & 3H Registered

PROTEAN Pure 3H FluidHigh performance direct contact fluidPROTEAN PURE 3H Spray Fluid is a high performance, multi-purpose oil, engineered for use within food production environments where direct food contact is unavoidable. PROTEAN 3H Spray Fluid prevents food products from adhering to surfaces during processing and also acts as a protective anti-rust film on metal surfaces, meat hooks and knives.BENEFITS:• NSF: 3H registered: Release agent for direct contact with food

• NSF: H1 registered (lubricant with incidental food contact – for use in and around food processing areas)

• Excellent wide temperature resistance of -10°C to +120°C

• Non-tainting, clear and odourless

• Suitable for use as a direct food contact release agent and multi-purpose lubricant

• Ideal for use on loaf pans, baking trays, chopping boards,

boning benches and other hard surfaces that come into contact with food products

• Excellent lubrication performance and enhanced oxidative stability for both extending lubrication intervals and reducing lubricant usage

• Good sealing properties protect against unwanted corrosive contaminants

• Does not contain animal derived materials, nut oils or genetically modified ingredients.

NSF H1 & 3H Registered

Pack Size

400ml Aerosol

400ml Aerosol

Part Code

F-430

F-435



FOOD

GRA

DE PR

ODUC

TS

Description

LPS Belt DressingLPS® Belt Dressing is formulated to extend belt life, prevent belt slippage,and resist water wash out. Belt Dressing Spray is a degreaser designed for removing heavy residues from metal and other hard surfaces where reduced flammability, toxicity and environmental impact are concerns. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 134508Acceptable for use in Canadian food processing establishments

LPS Food Grade Chain LubricantLPS® Food Grade Chain Lubricant is a water resistant lubricant designed primarily for the effective lubrication of all types of chains and conveyors operating in food environments. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 132899Acceptable for use in Canadian food processing establishments

LPS Clear Penetrating GreaseLPS® Clear Penetrating Grease is a high performance, versatile lubricant fortified with PTFE additives for enhanced lubrication. This is a clear, fast penetrating grease designed to go on wet and quickly set-up as a tacky grease. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 143804

LPS K2 Electronic CleanerLPS® K2 Electronic Cleaner is a non-chlorinated, plastic safe cleaner that is engineered to rapidly clean and restore electronic components. This spray cleaner is designed to remove dirt, moisture, dust, flux or oxides from the internal components of electronic or precision equipment such as circuit boards. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:NSF® Registered K2 # 146516

LPS Heavy Duty Silicone LubricantLPS® Heavy-Duty Silicone Lubricant is a unique water-based formulation that contains a high percentage of silicone for better and longer lubrication. This is an industrial lubricant designed to reduce mechanical wear and to extend equipment life of machinery where rubber and plastics are involved and where silicone can be tolerated. The aerosol can features DETEX™ metal & x-ray detectable plastic components. Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 059820Acceptable for use in Canadian food processing establishments

Pack Size

445ml Aerosol

430ml Aerosol

420ml Aerosol

416ml Aerosol

439ml Aerosol

Part Code

LPBD/AER

LPSCL/AER

LPSPG/AER

LPSC/AER

LPSHDS/AER

LPS RANGE LPS DETEX FOOD AREAThese aerosol cans feature DETEX™ metal & x-ray detectable plastic components.


FOOD

GRA

DE PR

ODUC

TS

Description

LPS Food Grade Machine OilLPS® Food Grade Machine Oil Spray is a lubricant and penetrant that minimizes friction, extends equipment life, and penetrates to provide complete surface coverage protection against wear and corrosion. Designed to displace moisture from mechanical and electrical equipment and provide a light-duty lubrication in food processing applications. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 129000Acceptable for use in Canadian food processing establishments

LPS Food Lube Penetrating OilLPS® FOODLUBE Penetrating Oil is a fully synthetic, fast acting, penetrant which also lubricates, displaces water, and protects against corrosion. This lubricant spray is designed to displace moisture from mechanical and electrical equipment and provide a light-duty lubrication in food processing applications. The aerosol can features DETEX™ metal & x-ray detectable plastic components.Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 147493

LPS Food Grade Silicone LubricantLPS® Food Grade Silicone Lubricant is a non-staining, high quality, lubricant designed especially for the food industry for use as an anti-stick agent for chutes and slides. The aerosol can features DETEX™ metal & x-ray detectable plastic components. Specifications & Approvals:Meets FDA Regulation 21 C.F.R. 178.3570 for incidental food contactNSF® Certified: H1 Registration # 113815Acceptable for use in Canadian food processing establishments

LPS Food Lube Sugar Dissolving FluidLPS® FOODLUBE Sugar Dissolving Fluid is a food grade lubricating release agent that rapidly dissolves and removes sugars from application surfaces to ensure components remain fully operational. It leaves a light, durable film on the surface to protect against corrosion and resist further sugar build up.FOODLUBE Sugar Dissolving Fluid is NSF® H1 registered for incidental contact with food making it ideal for use in food and beverage industries with stringent hygene standards. The aerosol can features DETEX™ metal & x-ray detectable plastic componentsSpecifications & Approvals:FOODLUBE Sugar Dissolving Fluid is manufactured from only FDA listed ingredients:FDA Group 21 CFR 178.3570NSF® H1 Registration # 147495

Pack Size

376ml Aerosol

357ml Aerosol

454ml Aerosol

445ml Aerosol

Part Code

LPSMO/AER

PSPO/AER

LPSS/AER

LPSSD/AER

These aerosol cans feature DETEX™ metal & x-ray detectable plastic components.

LPS RANGE LPS DETEX FOOD AREA


FOOD

GRA

DE PR

ODUC

TS

ACTIVATE RANGE AEROSOLSDescription Pack Size Part Code

Foodcare Spray Grease Fully synthetic clear grease with PTFE, excellent penetrating and water resistance. A short while after being sprayed out of the can it will set to the consistency of an NLGI ‘2’ grease. NSF H1 Registered Temperature Range -40°C to +170°C

Foodcare Penetrating Oil Fully synthetic fast-acting penetrating oil. Designed to provide a light lubricating film which is clear and non-staining. Suitable for use on cylinders, slideways, linear bearings etc. NSF H1 Registered Temperature Range -45°C to +170°C

Foodcare Moisture Repellent Fully synthetic fast-acting moisture repellent. Provides lubrication and protetion to prevent and displace moisture. Very good on electrics - sits on the electrical parts, repels the water off and leaves a protective film which doesn’t evaporate and instantly repels further water. This is excellent for switches, switch-gear, electrical equipment etc. NSF H1 Registered Temperature Range -40°C to +170°C

Foodcare Silicone Spray Fully synthetic light lubricant. Produces a ‘dry film’ lubrication. Particularly effective as an anti-stick agent on plastic, polymers, conveyors etc. NSF H1 Registered Temperature Range -50°C to +200°C

Foodcare Label Remover A low odour, fast acting label remover. Specifically designed for the removal of self-adhesive paper labels. NSF H1 Registered

Foodcare DegreaserPowerful non-chlorinated, non-perfumed degreaser. Provides excellent degreasing/ cleaning performance, evaporates completely leaving no residue. Can be used on electrical components. NSF K2 registered - K2 is the highest category for cleaners within the food production area. NSF K2 Registered

Foodcare High LoadFully synthetic & non-toxic high performance paste designed specifically for use within food & pharmaceutical areas. This is designed for use on heavy duty chains/ open gears, drilling & cutting compound extreme pressure lubricating grease. Can also be used as an antiseize and assembly paste. NSF H1 Registered Temperature Range -30°C to +170°C

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

200ml Aerosol

400ml Aerosol

400ml Aerosol

FCSG/AER

FCPO/AER

FCMR/AER

FCS/AER

FCLR/AER

FCD/AER

FCHL/AER


FOOD

GRA

DE PR

ODUC

TS

ACTIVATE RANGE AEROSOLSDescription Pack Size Part Code

Foodcare Blade Shield A safe and non-toxic lubricant designed specifically for use within food production areas. It has excellent lubrication and water washout properties. 3H registration states it may be used on grills, loaf pans, cutters, boning benches, chopping blocks and other hard surfaces to help prevent food from adhering during processing. Suitable for direct contact with foodNSF H1/3H Registered Temperature Range -20°C to +120°C

Foodcare High Tack Oil Fully synthetic highly tenacious lubricant. Contains a solvent which allows penetration into intricate mechanisms, then evaporates leaving a thin highly tenacious lubricating film that will not drip or fly off. This is used on chains in wet areas, open gears, and sprockets on light to heavy-load applications. NSF H1 Registered Temperature Range -40°C to +180°C

Foodcare Beltgrip High performance belt dressing that provides instant grip and reduces slippage. Non-toxic and colourless with a wide temperature range. Specifically designed for use on the underside of drive belts. NSF H1 Registered Temperature Range -50°C to +100°C

400ml Aerosol

400ml Aerosol

400ml Aerosol

3H/400

FCHT/AER

FCBG/AER

WE CAN ALSO SUPPLY THE COMPLETE RANGE

OF ACTIVATE OILS & GREASES - PLEASE

ENQUIRE.


FOOD

GRA

DE PR

ODUC

TS

Description

Why use NSF Registered ProductsThe Ambersil “Food Processing Safe” product range is fully NSF registered, for proven risk reduction.

See the product category ‘traffic-light’ icon in the product modules for guidance.

Ambersil Machine Oil FGNSF H1 GENERAL PURPOSE LUBRICANTFor use in the food industry as a highly effective metal-to-metal lubricating film.• NSF H1 registered (N°137999 & 140249)• Formulated using only food grade acceptable components• Creates a highly effective lubricating and anti-friction film • Can be used as an anti-corrosion coating for metal parts in

high humidity conditions • Operational temperature range: -18°C to +120°C

Ambersil Chain Lube FGFOOD GRADE PTFE CHAIN LUBRICANTIdeal for all types of chains and chain driven drive systems. The addition of PTFE to the lubricant enhances long-term chain lubrication• NSF H1 registered (N°137998 & 143144)• Gentle foaming action helps lubricant cling to chains and

penetrate deep into links• Leaves a tenacious, long lasting lubricating and anti-

corrosion film• Operational temperature range: -15°C to +175°C

Ambersil Dry PTFE Lube FGNSF H1 REGISTERED DRY LUBRICANTA fine, dry PTFE lubricant for the general lubrication of moving parts where an oily or silicone lubricant cannot be used.• NSF H1 registered (N°139899)• Excellent materials compatibility• Deposits a dry, non-staining film of pure PTFE • The dry film is unaffected by oil and solvents• Operational temperature range: -100°C to +200°C

Ambersil Silicone FGNSF H1 REGISTERED SILICONE LUBRICANTUse where friction reduction is required particularly plastic-to-plastic components, on guide rails or as a label adhesive anti-stick treatment to dramatically reduce label adhesive build-up.• NSF H1 registered (N°138000)• Excellent general lubrication with a relatively dry film• Eliminates sticking, squeaking and binding• Operational temperature range: -40°C to +200°C• Use on high-speed bagging lines and on chutes/slides

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

AMMOFG

AMCLFG

AMDPL

AMSILFG

AMBERSIL FOODLUBE GENERAL PURPOSE PRODUCTS

GREEN - Safest, use in all areasAMBER - Safe, use in all areas, with cautionRED - Safe, control measures requires

H1

H1

H1

H1


FOOD

GRA

DE PR

ODUC

TS

Description

Ambersil Penetrating Oil FGFOOD GRADE PENETRATING OILFor use in the food & beverage industry on fasteners seized by heat, corrosion, over-tightening and contamination.• NSF H1 registered (N°140260)• Spray on, allow to penetrate, and remove seized fasteners

without damaging the head, thread or risk shearing• Does not contain silicone• Safe for use on all metals

Ambersil Belt Dressing FGADHESIVE BELT LUBRICANTImproved grip on all types of belts whilst reducing squeak and prolongs belt service life. • NSF H1 registered (N°140257)• Works on all types of belts: vee, flat, toothed, rubber, leather

and fabric • Protects belt from deterioration through oxidation and heat • Tacky lubricating film increases belt pulling power and does

not fling off

Ambersil Assembly Paste FGADHESIVE BELT LUBRICANT Use in the same manner as a traditional Copper Anti-Seize on fasteners, or as a running-in compound for bearings. The non-metallic solids content makes this product suitable for use in the food industry. • NSF H1 registered (N°138266 & 139900)• Prevents seizure of threaded components enabling easy and

quick dismantling• Operational Temperature range: -30°C to +1100°C

Ambersil Food Grease FGMULTI-PURPOSE SPRAY GREASE Formulated for use in the food and beverage industry on plain bearings, hinges and moving parts. Particularly for limited access areas where regular grease penetration may be difficult. • NSF H1 registered (N°138266 & 140258)• NLGI type 2 white grease, aluminium complex thickened • Excellent resistance to moisture with very low water wash-

out• Operational Temperature range: -20°C to +140°C

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

AMPOFG

AMBDFG

AMAPFG

AMFOGFRG

H1

H1

H1

H1


We are able to supply all of the Ambersil range – Please feel free to contact us for more information


FOOD

GRA

DE PR

ODUC

TS

Description

Ambersil Moisture Remover FGNSF REGISTERED DEWATERING FLUIDFor use on equipment to displace moisture, particularly after wash-down. Ideal for use on electronics.• NSF H2 registered (N°142299)• Prevents corrosion by displacing water from affected areas • Provides precision lubrication with its thin, high dielectric

strength lubricating film• Operational Temperature range: -50°C to +120°C

Ambersil TufcutNSF H2 REGISTERED CUTTING FLUID A ready to use metal working lubricant.• NSF H2 registered (N°147110)• Improves heat dissipation and prevents chip welding • Prolongs drill tool life and improves cut quality • Ideal for use on machinery that cannot be removed to the

engineers workshop

Ambersil Leak Detector NSF P1 REGISTERED LEAK DETECTORA unique water based formulation, that is both safe in use and ease to use on pipes and joints. • NSF P1 registered (N°150402)• No oils, silicone or solvents • Non-flammable and odourless• Oxygen system safe• Meets BS EN 14291:2004

Ambersil Silicone Release FGFOOD GRADE SILICONE RELEASE AGENT A high purity silicone release agent for packaging and moulding operations within the food/beverage sector.• NSF registered M1 (N°149686)• Suitable for use as a mould release agent and packaging

machine anti-stick oil where the finished article will have direct contact to food

• Maximum operational temperature: +200°C• Totally clean, clear, and non-staining ‘wet’ film

Ambersil Non-Silicone Release FGFOOD GRADE NON-SILICONE RELEASE AGENT A non-silicone release agent with NSF registration for use in the food/beverage industry as a packaging release. • NSF registered M1 (N°149689)• Use on food packaging which is intended for direct food

contact such as plastic containers and sandwich boxes • Will not interfere with post moulding operations such as

bonding and labelling • Operational Temperature to: +170°C

Ambersil Clear Mould ProtectiveTRANSPARENT CORROSION INHIBITOR Use on moulds as a long-term protective during storage. Now with NSF registration for use on food/beverage packing mould tools. • Displaces moisture leaving a durable, non-greasy protective

film• NSF H2 registered (N°149688)• Will not stain or mark the mould; suitable for use with white

and transparent polymers• Easily “moulded off” when production recommences • Waxy film allows handling and resists acid finger marks

Pack Size

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

400ml Aerosol

Part Code

AMMRFG

AMTC

AMLD

AMSRFG

AMNOSIL

AMCMP

M1

M1


H2

P1

H2

H2


FOOD

GRA

DE PR

ODUC

TS

Description

Ambersil Blue Mould ProtectiveHIGHLY VISIBLE CORROSION INHIBITOR FOR FOOD PACKAGING A waxy, long lasting coating for mould tools and dies which is NSF registered for use in the food/beverage sector.• Non-silicone corrosion inhibitor for injection moulding tools • NSF H2 registered (N°149685)• Ideal for long-term storage of mould tools, dies, and jigs • Highly visible blue dye provides an easy visual method for

ensuring complete coverage• Easily “moulded off” when production recommences

Ambersil Amberclens FGNSF A1 WATER BASED DEGREASER Use to degrease components when a regular solvent degreaser cannot be used. Formulated specifically for use in the food/beverage industry for risk reduction. • NSF A1 registered (N°137995)• Stable, non-dripping foam helps break down soiling for

effective cleaning • Cleans equipment, metal parts, and machinery• Biodegradable

Ambersil Degreaser FGNSF A1 WATER BASED DEGREASER Use to degrease components when a regular solvent degreaser cannot be used. Formulated specifically for use in the food/beverage industry for risk reduction. • NSF A1 registered (N°137995)• Readily biodegradable and non-flammable • Effective in both hot and cold water • Use on gearbox housing, hydraulic systems, large panels, and

even walls and floors.• Concentrated for convenience and economy • Non-flammable

Ambersil Stainless Steel Cleaner FGDUAL ACTION CLEANER AND POLISHFor use on all types of stainless steel and other ‘shiny’ surfaces to remove light oils, fingerprints, and water marks.• NSF A7 and C1 registered (N°138212)• Dual action: cleans and polishes in one application • Dense foam allows use on vertical surfaces without dripping • Leaves an invisible, non-greasy film for lasting shine • Ideal post-maintenance cleaner

Ambersil Industrial Degreaser FGHEAVY DUTY, FAST EVAPORATING SOLVENTFormulated for use in the food/beverage industry to tackle ‘difficult’ degreasing applications. Excellent general purpose solvent degreaser. • NSF A8 and K1 registered (N°140255 and 140250)• Powerful flushing action with superior wetting properties

ensures excellent results• Zero residue

Pack Size

400ml Aerosol

500ml Aerosol

750ml Trigger

500ml Aerosol

500ml Aerosol

Part Code

AMBMP

AMAFG

AMDFG

AMSSCFG

AMINDFG


H2

A1

A1

A7 C1

A8 K1


FOOD

GRA

DE PR

ODUC

TS

Description

Ambersil Amberklene FG BIODEGRADABLE SOLVENT DEGREASER A medium/slower evaporation solvent degreaser for use in the food/beverage sector. Use to remove grease and oils from bearings, housings, conveyor drives, chains and even wax- based anti-corrosion coatings. • NSF A8 and C1 registered (N°137996 and 140261)• Higher flash point of +40°C for application safety

Ambersil Solvent Cleaner FGLOW ODOUR SOLVENT DEGREASER Use for general degreasing of mould tools, bearings, and equipment in the food and beverage sector. • NSF K1 registered (N°149687)• Minimal odour • Cuts through oils, grease residues, mould release agents,

polymer residues, and anti-corrosion coatings• Zero residue • Good materials compatibility

Ambersil Label & Adhesive Remover FGFOOD GRADE LABEL & ADHESIVE REMOVERUse for removal of packaging and transport labels from shipping containers, plastic boxes, and bulk storage (intermediate) drums.• NSF K3 registered (N°140259)• An optimum blend of solvent and citrus active ingredients

penetrates paper labels rapidly • Use on packaging lines to remove label and adhesive build up• Minimises the requirement for scraping

Ambersil Sugar Remover & Inhibitor FGCLEANER FOR SUGAR DEPOSIT REMOVAL Highly effective thin cleaning fluid that penetrates and lifts sugar, fondant, plant sugar extracts, and sugar derivatives from equipment surfaces. • NSF H1 registered (N°144180)• Formulated using only food grade acceptable components • Leaves a light lubricating film that inhibits re-adhesion for

easier clean-down • Helps reduce scraping and improves equipment performance

Ambersil Contact Cleaner FGFOOD GRADE ELECTRICAL CONTACT CLEANER Designed for electrical component maintenance in the food industry, particularly for on-line production electrics and similar delicate equipment. • NSF K2 registered (N°139627)• Use to remove grime and contamination from PBC’s and

electronics• Reduces voltage drop due to contamination • Non-corrosive and non-conductive

Ambersil Air Duster FGFOOD GRADE DUSTER FOR ELECTRONICS Use to remove loose contaminants from electrical equipment. Ideal for use in flour and spice production facilities. • NSF K2 registered (N°140256)• Non-flammable and zero odour in use • Does not contain CFC’s, HCFC’s, and is non-ozone depleting • Zero residue

Pack Size

500ml Aerosol

400ml Aerosol

200ml Aerosol

750ml Trigger

400ml Aerosol

400ml Aerosol

Part Code

AMAKFG

AMSC

AMLARFG

AMSRIFG

AMCCFG

AMADFG


A8 C1

K1

K3

H1

K2

K2


FOOD

GRA

DE PR

ODUC

TS

Description

Dow Corning 786Food Approved Silicone SealantMildew Resistant Silicone Sealant ideal for sealing refrigeration units and areas where food contact is likely. One part acetoxy silicone rubber sealant. Meets US Food & Drugs Administration Regulation number 21CFR177.2600. Safe for repeated food contact. Colours: White and Clear

Dow Corning 798Cold and Clean Room SealantFast curing silicone rubber sealant specifically designed for the sealing of refrigeration units and areas where intermittent contact with food is likely. Contains a fungicide to resist mildew and mould growth. Tested to European Directive 90/128/EEC migration Limit. Colour: White

Trade Mate Plumba Flue High Temperature Silicone Sealant A one component, high temperature, acetoxy silicone sealant that is suitable for use on non-porous surfaces. It is ideal for sealing gas flues, and once cured, is able to withstand temperatures of up to 300°C for short term exposure, and 250°C for long term exposure. It also meets the requirements of FDA Regulations for use in areas where food contact is likely. Colour: Red and black

DetectasilDetectasil is a detectable silicone sealant that can be ‘seen’ by metal and X-ray detection systems in the food industry. The sealant is used in structural fitting and equipment installation and reduces the risk of undetected contamination of food products. It is available in white or blue, and the 310ml tube fits standard applicators. The detectable additive tastes nasty to rodents and deters them from eating the sealant after application.It has good performance and can be applied in temperatures from +5°C to +50°C, and when cured it will operate at a Service Temperature: -30°C to +150°C. Unopened Detectasil will store for 12 months, and early indicators are that it will have a long service life.

Heavy Duty 10” Skeleton Gun10” Skeleton Gun, Specifically designed for use by the professional or home improvement enthusiastFor use with 310ml and 400ml cartridges.

Pack Size

310ml TubeBox of 12

310ml TubeBox of 12

310ml TubeBox of 12

310ml TubeBox of 12

Part Code

786

798

PLUMBA

DTM 0617

SKELEGUN

FOOD GRADE SEALANTS

We have a massive range of Silicones, Sealants and Adhesives - Please Ask For Further Information.


FOOD

GRA

DE PR

ODUC

TS

Description Pack Size Part Code

METAL DETECTABLE PRODUCTS

Penguin 900M - Heavy Duty Safety Knife A disposable safety knife with a metal detectable plastic body:• Foodsafe• Completely sealed to keep out bacteria• Stainless steel blade• Pointed nose for piercing • Ideal for cutting cardboard, tape, paper or plastic.

Detectapen• Metal detectable plastic body• Pressurised ink cartridge • Contamination prevention • Shatterproof• Retractable nib • Integrated clip • Blue casing for food areas • Black Ink

Detecta-Mark Permanent Marker Pen• Metal detectable plastic body and cap• Contamination prevention • Non toxic, xylene free, low odour • Ventilated safety cap

ECO DetectaPenThe ECO Detectapen® is the best value for money detectable pen. The beautifully simple design is comprised of only two main components, the pen body and the ink cartridge, both of which are fully detectable. The unique hexagonal design of the pen body minimises the risk of the pen rolling and potentially falling off work surfaces

900M

DTP

DTM

ST1E2

There are many different options available,

please contact us with your requirements

Did you know that we can supply fully metal detectable aerosols and trigger sprays? Have a look at page 17 & 18.


FOOD

GRA

DE PR

ODUC

TS

Description

Food Safe Surface Disinfectant WipesThis range of products has been developed to meet with ALL Current EU legislation for the purpose of wiping and disinfecting surfaces where food is being placed or prepared, without the need to have to rinse prior to use.Tested to BSEN:1276 against a range of bacteria and virus.

Alcohol Free Hand & Surface Disinfectant Wipes Hand & Surface Disinfectant WipesThis range has been developed and clinically tested for the effective disinfection of all hard surfaces and hands. The formulation remains active on the wiped surface for up to 30 days, enhancing infection control procedures.The formulation is effective against E-coli, Salmonella, C-diff and Tuberculosis.Being alcohol-free makes them suitable for use in Halal establishments.Tested to BS EN13727, BS EN1276 & BS EN1438

Alcohol Free Surface Disinfectant WipesThis product range has been developed and clinically tested for the effective disinfection of all hard surfaces.The formulation remains active on the wiped surface for up to 30 days, enhancing infection control procedures.The formulation is effective against E-coli, Salmonella, C-diff and Tuberculosis.Being alcohol-free makes them ideal for use in Halal establishments.Tested to BS EN13727, BS EN1276 & BS EN1438.

Envirowipe Roll Anti-bacterial Medium-weight Compostable Cleaning ClothsProduced from 100% natural Rayon fibre which will fully compost in normal landfill conditions.Envirowipe has an open cellular structure which increases wiping performance and is easy to rinse clean.Absorbs up to 10 times its own weight. Machine washable several times. Available in 4 fresh colours.

70% IPA WipesThese individually wrapped low linting multipurpose wipes are impregnated with 70% IPA and 30% Deionised water, to clean, prepare or degrease a variety of surfaces. The wipes are effective in removing dust, dirt and grease from electronics, print heads and peripherals across a number of applications. They can be used for general surface cleaning and to prepare surfaces prior to bonding adhesive tapes.

Pack Size

Sheet size: 20 x 18cm Sheet size:20 x 20cmSheet size: 20 x 20cm

150 wipe bucketSheet size: 30 x 25cm

Sheet size: 20 x 20cm

250 Sheets per roll, Sheet size: 25 x 36cm

Pack Qty: 1000

Part Code

EBSD1000QF

ETSD200QF

ETSD200IPA

EBHSD150AF

EBSD500AF

EWR500

IPA/1000

FOOD SAFE WIPES

1000 Quat-Free Wipes

200 Quat-Free Wipes

200 Wipes - 70% Alcohol

If you cannot find the product you are looking for please call us on 01822 855 885

Documents

FOOD GRADE PRODUCTS 1NSF & INS Categories FOOD … · Temperature range -50°C to +280°C Halal and Kosher certified Roto-Tech Semi-fluid synthetic lubricant fortified with graphite