for Civil and Military Aircraft, Helicopters and UAS

[email protected] | www.scanav.com

for Civil and Military Aircraft, Helicopters and UAS

The SA Group HQ

Billund International Airport | Stratusvej 9 | 7190 Billund | Denmark | +45 7950 8000 | [email protected] | www.scanav.com

ABOUT THE SA GROUPOur missionWe provide complete turn-key avionics solutions for civil and military aircraft, helicopters and UAS. Including sales, maintenance (MRO), certification (STC), design & engineering, installation, product development, production, training and consultancy services. In addition, The SA Group is an appointed distributor and service center for most of the civil avionics OEM’s (Original Equipment Manufacturer) and has commercial agreements with many key military producers – several on an exclusive basis.

Our visionWe strive to be the leading avionics company outside the USA, also to be known as the most flexible, competent and reliable international avionics supplier within its business area.

Our historyScandinavian Avionics A/S (SA) was established in 1978 in Billund, Denmark with the objective to serve the civil aircraft industry within sales, installation and maintenance of avionics. Already after two successful years the first external division was opened in Oslo, Norway, and since then, SA has expanded into a larger organization, with 13 international divisions – The SA Group.

Today, 43 years after the foundation, The SA Group is a highly experienced avionics organization characterized by high quality products, services, worldwide support and a responsive, open-minded and professional attitude in all aspects of the business.

WORK PERFORMED ON MORE THAN 250 DIFFERENT AIRCRAFT TYPES

MORE THAN 1.000 CERTIFICATION PACKAGES AND STC’S DEVELOPED

MORE THAN 3.000 INSTALLATIONS PERFORMED

MORE THAN 40 YEARS OF EXPERIENCE WITH AVIONICS SOLUTIONS

MRO CAPABILITY FOR MORE THAN 16.000 PART NUMBERS

THE SA GROUP IS REPRESENTED IN 9 COUNTRIES, ON 13 LOCATIONS

WE PRODUCE HIGH QUALITY INSTALLATION KITS IN-HOUSE

WORLDWIDE AVIATION TRAINING CAPABILITY

The SA Group HQ


THE SA GROUP OVERVIEWThe SA Group consists of 13 divisions located in Europe, the Middle East, India and Southeast Asia. The headquarters, which was established in 1978, is located in Billund, Denmark.

All products and services are based on relevant approvals from EASA, FAA and several local authorities.

APPROVALS

EASA Part-145

EASA Part-21J

EASA Part-21G

EASA Part-147

FAA Part-145

TCCA Part-145

BCAA Part-145

GAR Part-145

DOT RIN N083

The SA Group HQ

Scandinavian Avionics A/S

Billund, Denmark

Scandinavian Avionics Norway

Oslo, Norway

SA Technologies

AB

Stockholm, Sweden

Scandinavian Avionics

Design ApS

Billund, Denmark

CSD Competence

Center

Vienna, Austria

Scandinavian Avionics

Production A/S

Billund, Denmark

SAZ Aerospace

s.r.o.

Prague, Czech Rep.

Scandinavian Avionics CIS

Riga, Latvia

SA MEA Avionics

Muharraq,Bahrain

Scandinavian Avionics Malaysia

Selangor, Malaysia

SA Airworks India Private

Limited

Gurgaon, India

Scandinavian Avionics Bromma

Bromma, Sweden

AEROTEAM Training

Solutions ApS

Billund, Denmark

The SA Group HQ


Worldwide Service and SupportThe customer base is geographically spread all over Europe, Africa, CIS, the Middle and Far East. All customers can benefit from the worldwide technical services on-site at the customer’s location, available around the clock.

The worldwide services are carried out from our 13 SA divisions in Europe, the Middle East, India and Southeast Asia. The service centers are manned by well-trained staff and supported by the Original Equipment Manufacturers. All services are based on the required procedures, test equipment, tools and documentation.

Our technical services cover all areas from line service to complete turn-key solutions and are typically performed in close co-operation with the HQ competence center in Billund, Denmark, taking advantage of Group experience and local presence, providing immediate and qualified on-site system troubleshooting, repair and modifications as well as development of certifications (STC’s) according to local, FAA or EASA requirements.

Technical and operational training (EASA Part-147) is provided on world wide basis.

BUSINESS AREAS OF THE SA GROUP

LOGISTICS & PARTS SERVICES

MAINTENANCE - MRO SERVICES

DESIGN, ENGINEERING & STC’S

TRAINING SERVICES

INSTALLATION SERVICES

PRODUCT DEVELOPMENT

PRODUCTION SERVICES

CONSULTANCY SERVICES



Our logistics system hold a large supplier network with more than 100 approved avionics manufacturers and suppliers. We can provide logistics support, exchange and outright sales for a significant range of avionics equipment, instruments and spare parts.

Supplier NetworkThe SA Group represents a wide range of the world’s leading avionics manufacturers, including i.a.:

LOGISTICS & PARTS SERVICES

As an OEM approved dealer, The SA Group offers full support, traceability and warranty on all factory new OEM units. In addition, all serviceable and overhauled equipment is supplied with EASA Form 1 or/and FAA 8130-3 or other agreed civil or military release certificate as well as a high level of warranty support.

Logistics SupportDue to an efficient logistic system centrally located in the headquarters of The SA Group, we are is able to offer all customers the ultimate equipment and support as quickly and efficiently as absolutely possible.


Since the founding of The SA Group, avionics maintenance, repair and overhaul (MRO) has been a key part of the business. With highly skilled technical staff and workshops in Denmark, Sweden, Norway, India and Malaysia, The SA Group offers a broad line of maintenance services, including:

Equipment repair and overhaul EASA, FAA and TCCA triple release capability Equipment rental and exchange 24 hour worldwide AOG support

Based on EASA-, FAA- and TCCA Part 145 and a variety of other local maintenance approvals, as well as more than 43 years of experience with avionics maintenance, The SA Group supports more than 16.000 part numbers from most of the leading avionics manufacturers in the world. Maintenance services are provided locally via the different SA Group members’ facilities.

Repair and OverhaulThe SA Group holds an extensive in-house repair and overhaul capability based on repair center agreements with several world-known avionics brands including: BendixKing, Honeywell, Collins Aerospace, Garmin, Universal Avionics, BOSE, Orolia, Thommen and Telephonics just to mention some examples. This means that The SA Group is fully supported by the OEMs with all the latest knowledge, spare parts and documentation in order to carry out high quality repairs and overhauls for the benefit of the customer. In addition, external repair and overhaul capability is available with fast turn-around-times through The SA Group logistics support system.

As basis for qualified and effective system testing and troubleshooting, The SA Group has invested heavily in state-of-the-art test equipment, including automatic test equipment for e.g. EFIS and FMS, and our well trained technical staff are experienced with avionics systems and aircraft interfaces, testing and optimization. Furthermore, all testing and troubleshooting is performed in accordance with OEM specifications, ensuring the best possible diagnosing as specified by the equipment and/or aircraft manufacturers.

Rental & ExchangeIn order to handle or avoid aircraft on ground (AOG) situations, The SA Group offers rental or exchange units 24 hours a day, 7 days a week.

MAINTENANCE – MRO SERVICES


The SA Group develops and designs complex structural and electrical complete turn-key avionics modifications for basically any application and is involved in complete aircraft nose to tail engineering programs. Providing all interfaces and interconnections for complete aircraft development programs, e.g.: 5-tube EFIS upgrade including engine interface for Part-25 aircraft, FMS solutions, ADS-B, special mission upgrades with special designed interface concepts, camera mountings, SLAR & FLIR installations, interface solutions, IFE concepts and designs, etc.

The Design & Engineering Department develops various essential documents for certification of avionics modifications (as a basis for EASA, FAA, military or alternative authorities’ approval), including:

Technical Orders Certification Programs Cockpit Layouts Wiring Diagrams Structural Drawings Structural Strength Calculations Compliance Records Load Analysis Weight and Balance Calculations Ground and Flight Test Procedures Continuous Airworthiness Flight Manual Supplements EMI Assessments

All the above and other relevant documentation can be performed by The SA Group to certify and complete any modification of larger as well as smaller aircrafts and helicopters.

A skilled team of engineers are spread all over The SA Group locations around the world, and our engineers have extensive experience of 40 years+ within the avionics business. The SA Group continues to train and keep the staff up to date with the current requirements and knowledge on the latest equipment, avionics and concepts within the area of avionics and airborne electronics.

Our engineering team are ready to take on any avionics or aircraft electronics challenge.

DESIGN & ENGINEERING


CERTIFICATION SERVICESEASA Part 21J Design OrganizationThrough the EASA Part 21J approved design organization, Scandinavian Avionics Design ApS (SAD) – part of The SA Group, offers development of supplemental type certificates (STC) and minor changes to existing aircraft type certificates, covering any avionics or electrical modification of any aircraft or helicopter application.

Over the years, SAD has developed more than 1000 STCs and certification packages, for a wide range of avionics system modifications in a wide range of aircraft types.

SAD also provides certification packages that comply with a wide range of other military and civil regulations and requirements, customized to the specific rules and regulations in any specific area.

STC DevelopmentSupplemental Type Certificates are developed for any type of avionics system upgrade as part of a complete turn-key solution. This including parts supply, installation and training or as a single project for other qualified modification centers with relevant installation capability and approvals.

In addition to avionics systems upgrades, SAD offers certification of structural upgrades and interior modifications, performed by SA and/or selected partners.

New certification packages are being developed every month and SAD supports any type of avionics upgrade or interior modifications for any type of aircraft as specified and agreed with the customers.


Any avionics application for any aircraft typeThe SA Group holds more than four decades of experience in performing avionics modifications, on a wide range of civilian and military fixed- and rotor wing aircraft platforms and UAV’s. Based on our EASA-, TCAA & FAA Part 145 approved maintenance organization approvals, we work on any electrical or avionics related systems flying, and our installation capability ranges from simple tasks through to complete EFIS and special mission upgrades. The SA Group is a recognized service center for the majority of the leading avionics manufacturers, and our offerings include i.e.:

INSTALLATION SERVICES

ADS-B Solutions

Flight Management Systems

Safety Service Systems

Autopilot Systems

Inflight Connectivity (Satcom)

Radio Communication Systems

Recorder Systems

Satellite Positioning & Navigation Systems

Satellite Communication Systems

Search & Rescue Applications

Surveillance Systems

Special Mission Systems

EFIS Systems

...and much more.

Quality is keyThe highly experienced technical staff perform all installations, with the highest quality by means of serious craftsmanship, high quality materials as well as air and ground testing with dedicated flight test engineers and recognized test equipment.

All installation projects are performed efficiently with a fast turn-around-time in one of our hangar facilities or via field service teams around the world, in collaboration with customers and partners.


COMPLETE TURN-KEY

TRAINING SOLUTIONSPage 1 of 3

AEROTEAM Training Solutions │ Part of The SA Group

Billund International Airport | Stratusvej 9 | 7190 Billund | Denmark | +45 2032 3676 | [email protected] | www.aeroteam.dk

AEROTEAM Training Solutions offers complete turn-key training solutions, aimed at the aviation industry as a whole. Besides offering a wide range of high quality training courses in many areas of the aviation environment, we are providing a complete solution taking care of competence control, scheduling, consultancy, coordination and execution of the entire training scheme for your organization, leaving your key personnel focussed on their primary tasks.

All training courses can be performed at any of The SA Group facilities, or at the customer’s facility if more convenient.

At AEROTEAM Training Solutions training is not just a tickmark to satisfy the authorities. We focus on high quality, interactive classroom training with the student and learning objectives as the sole purpose. We pride ourselves in involving the student, and facilitating an environment where there is space for sharing experiences and having an entertaining learning experience.

On the following pages you can see more information on the training subjects: Competence Control, Customized Training Courses, Operational Training, Technical Training and EASA Part-147 Training.


Page 2 of 3



COMPETENCE CONTROLTraining is what we do at AEROTEAM Training Solutions, and we know how important it is to focus on your core competencies and the tasks where you can create the most value for your organization. A complete turn-key training solution from us will help your organization to focus on the areas where it can create the most value, while being assured that all training requirements are compliant and taken care of. Our Competence Control Software (CCS) provides a complete overview of your entire organization, training due, training schedules, roles, responsibilities and so much more. For a fixed fee per month you will have access to the CCS for your entire staff, and we will take care of all training requirements.

Features of CCS Keep track of: roles, training

requirements, training schedules and due dates on an individual level.

Keep track of: AML status, CPL status, ID card expiration, etc.

Our CCS includes a Learning Management System (LMS) for online training content.

All training certificates are saved in the system for easy access and overview in audit situations.

The system is web-based. All employees have access to an app for easy access to their status and upload of course certificates etc.

A subscription based, all-inclusive training solution, for you to focus on your core business.

CUSTOMIZED TRAINING COURSESWe provide a lot of training courses developed in close collaboration with our customers to cover their specific needs and requirements. Our instructor portfolio is extremely wide with vast experience within basically any part of aviation, enabling us to provide a solution tailored to the specific needs, according to the highest standards.

Examples of Other Training Courses Dangerous Goods

AREA 100 KSA (Knowledge - Skills - Attitude)

Security Manager Basic Course (NASP 13.1)

Train the Trainer

Mental Math for Pilots

Human Performance and Limitations

Instructor Assessment Skills

Certification Specifications (CS23/CS25/CS27/CS29)

COMPLETE TURN-KEY

TRAINING SOLUTIONS

[email protected] | www.scanav.comAEROTEAM Training Solutions │ Part of The SA Group


Page 3 of 3

EASA PART 147 TRAININGAEROTEAM Training Solutions holds the EASA Part 147 approval, offering customized B1, B2 and C type training courses to your maintenance organization. The training courses are EASA approved and will result in a Certificate of Recognition (COR), for a type endorsement in the AML of the participants.

Examples of Currently Approved Type Training Courses B1/B2/C on Gulfstream G550

B1 on Bombardier CL604

B1/B2 on Pilatus PC-12

TECHNICAL TRAINING AEROTEAM Training Solutions offers training courses for the maintenance environment, in order for you to keep your staff sharp and compliant with the ever evolving regulations and safety requirement. Human Factors, EWIS, Fuel Tank Safety, Component Level Maintenance Training, Avionics Systems Operation and many other training courses tailored to your needs.

Examples of Technical Training Human Factors

(initial and continuation)

EWIS Module A-F (initial and continuation)

EWIS Module G (initial and continuation)

Fuel Tank Safety

Safety Management System (SMS)

Operational Suitability Data (OSD)

Component Level Maintenance Training

Foreign Object Damage (FOD)

OPERATIONAL TRAININGAEROTEAM Training Solutions have a solid experience in providing training courses for the operational environment. Our customer base are located all over the world and we perform training for a wide range of operators and airlines.

Examples of Operational Training Crew Resource Management

(CRM)

Flight OPS Assistant

Performance Based Navigation

Fuel Efficiency & Flight Planning

Safety Management System (SMS)

Safety and Emergency Procedures

First Aid

COMPLETE TURN-KEY

TRAINING SOLUTIONS


Introducing our world of interactive and innovative training toolsNext level interactive classroom training, where the student and learning objectives are in focus, and we can facilitate an active and educational environment. The range of MAYDAY Training Tools are great facilitators for your training requirements, whether you are an MRO or an operator.

All our MAYDAY Training Tools have been developed to make classroom training more interesting and motivating for both students and instructors. We believe in classroom training as the most efficient way to provide ground training for maintenance personnel, flight- and cabin crew and other operational staff.

The tools consists of a physical board game where events, crew, personal compentencies, time and money are being used as drivers, to improve teamwork and enhance the non-technical skills, as well as sharing knowledge and experience amongst the students.

With several versions of our MAYDAY Training Tools, we have designed the perfect facilitator for a wide range of training applications.

We strive to deliver the best tools available for classroom training, making the training interesting and educational for both students and instructors. Our tools are EASA and FAA compliant, and covers the majority of required syllabuses where applicable. We are constantly in the process of developing new tools and updating our existing ones, with new scenarios and compliance to evolving regulation.

MAYDAY Training Tools Crew Resource Management (CRM) Human Factors Stress Management Location & Procedures Pre-flight Briefing Cards

For more information on the various versions of MAYDAY, please visit our website: www.aeroteam.dk/mayday



Training Tools


PRODUCT DEVELOPMENTCustomized Avionics and Electronic ProductsIn order to ease the operation of certain applications for the operator and to simplify certification aspects, particularly for the aviation industry with very stringent certification requirements, Scandinavian Avionics A/S and Scandinavian Avionics AB, – members of The SA Group, provides in-house development of intelligent and cost-effective customized avionics and aircraft electronics devices and concepts.

The customized products are designed to meet a certain demand or niche within the field of electronics, primarily aimed at the aviation industry. However, Scandinavian Avionics A/S and Scandinavian Avionics AB also offers development programs for land mobile and maritime applications.

Staffed by a number of highly experienced engineers, the product development division has the advantage of the experience within both operational, installation and certification aspects and consequently is able to avoid potential obstacles at an early stage in a development program.

Based on customer feedback, Scandinavian Avionics A/S and Scandinavian Avionics AB continuously identifies areas with great potential for new products that can ease operational, installation and/or certification aspects of certain applications. Over the years, Scandinavian Avionics A/S and Scandinavian Avionics AB has developed a number of intelligent products, including fleet management systems, ground radios for control towers, control units for sliding carpet systems, navigator guidance systems for boats, a future proof Electronic Flight Bag (EFB) solution and the latest product in line – a Collision Avoidance, Tracking and ID (CATI) system for UAVs and other aircraft.

The SA Group is constantly working on new products and ideas based on customer feedback in order to meet general and specific requirements. The SA Group want to offer the market intelligent products that minimize certification costs and optimize efficiency.

Collision Avoidance, Tracking & ID (CATI) System

Navigation Guidance System, NGS1011

Electronic Flight Bag (EFB) Solution: Tablets (Windows or iOS), DIC-600, CWAP, Tablet Control panel with or without WiFi, CDSS, CCSS and ERC-400

Scandinavian Avionics AB │ Part of The SA Group

Trafikgatan 11, 1tr | 85644 Sundsvall | Sweden | +46 703 827 710 | [email protected] | www.scanav.com

The EFB solution serves as a good example of the product development capabilities offered by The SA Group.

Scandinavian Avionics offer a complete turn-key EFB solution including all equipment, certification, installation, training and other support. At the moment the solution is certified for A320, B737MAX, B737NG, B757, B767, ATP, ATR Q200 and Q400 aircraft and more aircraft types will follow in the near future.

Our EFB solution consists of Windows or iOS tablets DIC-600 – Data Integration Center, AID CWAP – Cockpit Wireless Access Point Tablet Control Panel Tablet Control Panel WiFi CDSS – Cockpit Door Surveillance System CCSS – Cargo Camera Surveillance System ERC-400 – Ethernet Radio Controller, Ground based communication

Our modular tablet based EFB solution is a state-of-the-art future proof EFB solution which provides the functionality to meet today’s operational requirements of airlines and aircraft operators and at the same time is simple to upgrade in the future to meet new requirements and needs.

ELECTRONIC FLIGHT BAG SOLUTION

EFB Control Panel

Data Integration Center (DIC-600)

Ethernet Radio Controller (ERC-400)

Cockpit Wireless Access Point (CWAP)

Cockpit Door Surveillance System

The SA CATI SystemThis system consists of transponders which are able to broadcast the position, speed, direction, height and identification of the UAV on which it is installed. The transponders can be configured to do that at a certain rate, or only when it is interrogated by a predefined unit. The operator of the UAV has real time ID of his own UAV and other UAVs in the area, with the system installed. Other units can also access the info by using the system, and it can be made available through the web. All communication can be encrypted, and performed on a single narrowband frequency.

ApplicationThe regulation until now, restricts the use of UAV in civil airspace to be within visual line of sight. In UAV/UAS working groups discussing the use of UAV beyond line of sight (BLOS) one of the key elements has been the possibility to identify the UAV at all times via electronic devices. This system has been developed in order to meet this requirement, and give the UAV operators the possibility always to identify the UAV in all scenarios (also future BLOS operations). Range: Tested to 60 km Beyond Visual Line Of Sight.

Science – how does it work?The UAV CATI system consists of a transponder that can be configured for either airborne installation or ground station use:

Airborne configuration: Bluetooth disabled, because power consumption is highly important

Ground station configuration: Bluetooth enabled, for easy connection to ground infrastructure.

Built-in GPS Built-in accelerometer and barometric sensor

The transponders are able to exchange information at a high rate between two units if necessary; alternatively it can broadcast to all units. Discrete I/O and Analog inputs provide the possibility of communicating the environmental condition of each transponder.

The technology is derived from the well proven VDL Mode 4 Aviation technology; however it transmits on 869.525 MHz. It can handle 75 transponders within line of sight @ 1 sec. update rate, or more with lower update rate.

The ground station transponder is connected by bluetooth to a windows-based PC, tablet or smartphone, which has the CATI system application installed and uses Open Street Map as map interface. The application shows activity track on the map on PC/tablet or smartphone. In case of accident of the UAV, the last position will be displayed on the map with coordinates. The battery backup lasts up until 3 hours.

COLLISION AVOIDANCE, TRACKING & ID SYSTEM

Transponder unit from the CATI systemSize: 19mm x 23mm x 69mmWeight: Less than 50gExternal Power Input: 5-28 VDCInternal Battery Backup: 3 Hours

Scandinavian Avionics A/S │ HQ of The SA Group



Scandinavian Avionics Production A/S - Part of The SA Group, holds the EASA Part 21G Production Organization Approval.

Two Approvals in Perfect SymmetryWith the EASA Part 21G Production Approval, we are able to manufacture/produce electronic components and complete kits, including electrical and structural parts. All production is performed according to approved data, delivered by either Scandinavian Avionics Design (EASA Part 21J approved) or 3rd party certification organizations.

For kit manufacturing we use our in-house laser wire marking machine with wire loom high voltage testing capability. Manufacturing of complete wire looms is one of our specialties. We also produce various mechanical and structural parts for our installation kits, examples are tablet holders and constant friction mounts for EFB applications, antenna doublers, racks and shelves for various upgrade applications.

As we hold both the EASA Part 21J Design approval and the 21G Production Approval, we can provide our customers with complete production capability from the design phase to serial production of electrical and mechanical parts and kits according to customer requirements.

Quality is KeyAs approved manufacturer of airworthy products we have demonstrated to live up to the highest standards in the aviation industry. We approve and monitor our suppliers, and have full traceability of all parts and materials supplied.

All parts and kits are produced according to approved data, and is delivered with an EASA Form 1.

PRODUCTION SERVICES


It can be hard to navigate in the complex world of avionics and related regulations. Based on an extensive knowledge and experience, The SA Group offers highly qualified consultancy services with the purpose to guide customers through the complex dynamics of avionics and electronics related projects to enable them to make the most competent, future-proof and cost-effective decisions as possible. The SA Group provides its consultancy services to many different customer types in many different types of constellations.

Aircraft Operator ConsultancyFor any aircraft operator it can be challenging to keep up to date with current regulative, airworthiness and/or operational requirements in the ever changing EASA environment. The SA Group is working with mandates every day and is able to assist with an overview of the operator’s current aircraft status and to provide a report and propose a solution which will secure the operation of the aircraft now and in the years to come.

Aircraft OEM ConsultancyAs a link between the aircraft OEM and the avionics OEMs, The SA Group offers consultancy services including guidance about any avionics related issues, such as certification, operational considerations, maintenance and future-proofing of the avionics systems in the aircraft. This is an efficient and cost-effective solution for any aircraft OEM, who requires avionics support by experienced and knowledgeable specialists around the clock.

Military and Government ConsultancyBased on local presence with significant insight into the defense industries and in-depth knowledge about government and defense requirements in many countries in Europe, CIS, Africa and the Middle- and Far East, The SA Group offers a range of consultancy services to support avionics and electronics manufacturer’s response to international tenders for defense and government projects, including:

In addition, The SA Group has skilled personnel to support the customer (Government, Air Force, Army, Marine etc.), with exploring possibilities of various offset arrangements.

The above mentioned constellations are just a few examples of the consultancy capabilities offered by The SA Group. Basically, The SA Group offers consultancy services for any type of avionics and electronics requirements in any type of constellation.

CONSULTANCY SERVICES

Market Intelligence

Operational Requirements

Project Management

Bid Preparation

Industrial Co-operation

System Procurement

Field Trials

Project Marketing

Offset Support

Quality & ApprovalsThe SA Group is continually and proactively working with quality assurance to ensure that all technical activity is performed in accordance with relevant specifications, documentation and regulations laid down by customers and relevant authorities.

The SA Group currently holds the following approvals: EASA Part 145 Maintenance Organization Approval EASA Part 21J Design Organization Approval EASA Part 21G Production Organization Approval EASA Part 147 Training Organization Approval FAA Part 145 Maintenance Organization Approval TCCA Part 145 Maintenance Organization Approval BCAA Part 145 Maintenance Organization Approval GAR Part 145 Maintenance Organization Approval DOT RIN N083 Hydrostatic Cylinder Requalification Approval

Furthermore, AQAP regulations are considered as background for modification, repair and other technical activities mainly in the military area in order to obtain required approvals and ensure the highest external and internal quality standards.

In order to fulfill the SA policy of being a flexible, competent and reliable source of products and services, the ISO system is respected for all relevant activities in order to maximize effectiveness and customer satisfaction.

THE SA GROUP APPROVALS



GROUP CONTACT INFORMATION Scandinavian Avionics A/S (HQ) Stratusvej 9 Billund International Airport 7190 Billund, Denmark Phone: +45 7950 8000 E-mail: [email protected]

Scandinavian Avionics Design ApS Stratusvej 9 Billund International Airport 7190 Billund, Denmark Phone: +45 7950 8000 E-mail: [email protected]

CSD Competence Center Pfarrwiese 8 3443 Sieghartskirchen, Austria Phone: +43 664 91 30 950 E-mail: [email protected]

Scandinavian Avionics Production A/S Cargo Centervej 57 7190 Billund, Denmark Phone: +45 7950 8000 E-mail: [email protected]

AEROTEAM Training Solutions ApS Stratusvej 9 Billund International Airport 7190 Billund, Denmark Phone: +45 7950 8000 E-mail: [email protected]

Scandinavian Avionics CIS P.O. Box 77 9, Ruses Street 1029 Riga, Latvia Phone: +371 2922 9592 E-mail: [email protected]

SA MEA Avionics Villa 1376 Road 4522 Block 245 Arad Muharraq, Kingdom of Bahrain Phone: +973 66 93 932 E-mail: [email protected]

Scandinavian Avionics Norway Generalmajor Mehrers Veg 1 2030 Nannestad, Norway Phone: +47 6480 8090 E-mail: [email protected]

Scandinavian Avionics Bromma AB Bromma Stockholm Airport Hangar 4 168 67 Bromma, Sweden Phone: +46 898 9710 E-mail: [email protected]

Scandinavian Technologies AB Israel Perssons vaeg 36 S-184 70 Aakersberga, Sweden Phone: +46 709 737 710 E-mail: [email protected]

SAZ Aerospace s.r.o Pekarska 1640 686 04 Kunovice, Czech Republic Phone: +420 608 377 477 E-mail: [email protected]

SA Air Works India Pvt. Ltd. KalyaniHouse,2ndfloor Plot No. 40, Sector 18 Udyog Vihar, Phase 1 122 001 Gurgaon Haryana, India Phone: +91 0124 4642 200 E-mail: [email protected]

Scandinavian Avionics Malaysia SDN BHD NO. 35 Jallan Apollo U5/192 Bandar Pinggiran Subang 40150 Shah Alam, Selangor, Malaysia Phone: +603 7846 2998 E-mail: [email protected]

Documents

for Civil and Military Aircraft, Helicopters and UAS