CAT® MINI EXCAVATORATTACHMENT OPTIONS

For more information, visit petersoncat.com/products/new/attachments or contact us today.

P45_0419 © 2018 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

AEXQ1584-02 March 2018

DO MORE WITH ONE MACHINE.Invest in what you already own — give your machine Cat® attachments and equip it to do more. And because our attachments are engineered, balanced and tested to each Cat model, they promise to minimize stress and optimize performance. Browse our lineup and find the tools to make your work easier.

3 32

AUGERS

Bore with better efficiency.

Our augers offer different speed and torque options for work in a variety of soils. We’ve engineered their speed to extract soil efficiently and their torque to prevent stalling in dense ground. Select from a range of auger bits. See page 12 for details.

Attachment Models Machine Models

Drive Shaft Torque @ Max Pressure

Nm (lb ft) Drive Method

A7B 301.4C-302.7D CR 1105 (815) Direct Drive

A14B 302.2D-304E2 2304 (1700) Direct Drive

A19B 303E CR-305.5E2 CR 4118 (3037) Single Planetary

A26B 305E2 CR-308E2 CR SB 6826 (5034) Double Planetary

Specifications

Mini Excavators

301.4C 301.7D CR 302.4D 303E CR 304E2 CR 305.5E2 CR 308E2 CR SB301.7D 302.2D 302.7D CR 303.5E2 CR 305E2 CR 307E2

54

The shape of our buckets improves digging, loading and material retention. Compared to most competition, we have more capacity per every inch of width. And each is made of high-strength, tempered steel. Select from a range of bucket teeth.

Attachment Models Machine Models Width Range Capacity Range

mm (in) m3 (yd3)

Digging 300.9D-302.7D CR 230-700 (9-28) 0.014-0.111 (0.018-0.145)

Ditch Cleaning all below 700-1600 (28-63) 0.027-0.421 (0.035-0.55)

Tilting Ditch Cleaning 301.4C-305.5E2 CR 1000-1600 (40-63) 0.055-0.28 (0.071-0.366)

Heavy Duty 303E CR-308E2 CR SB 300-914 (12-36) 0.05-0.39 (0.065-0.51)

Heavy Duty Capacity 305E2 CR, 305.5E2 CR 300-915 (12-36) 0.082-0.300 (0.107-0.392)

Heavy Duty Rock 307E2, 308E2 CR SB 610-762 (24-30) 0.23-0.31 (0.30-0.405)

Mud/Grading all below 1000-1500 (39-59) 0.09-0.52 (0.12-0.68)

BUCKETS

Specifications

Specifications

Move more material in less time.

Mini Excavators

300.9D 301.7D 302.2D 302.7D CR 303.5E2 CR 305E2 CR 307E2301.4C 301.7D CR 302.4D 303E CR 304E2 CR 305.5E2 CR 308E2 CR SB

Mini Excavators

301.4C 301.7D CR 302.4D 303E2 304E2 CR 305.5E2 CR 308E2 CR SB301.7D 302.2D 302.7D 303.5E2 CR 305E2 CR 307E2

COMPACTION WHEELS

Cat Compaction Wheels provide a low cost option for trench compaction. The wheels feature tapered roller bearings and tampered foot design with static pad rollers, to allow for smooth operation and achieving a high level of compaction. Six to ten passes are usually adequate to achieve compaction in normal soil conditions, dependent on the required compaction levels.

Smooth operation in rough environments.

Machine Models Weight Width Number of Wheels

Total Number of Pads

kg (lbs) mm (in)

301.4C, 301.7D, 301.7D CR 155-258 (342-569) 271-553 (11-22) 271-553 271-553

302.2D, 302.4D, 302.7D 161-264 (354-583) 271-553 (11-22) 271-553 271-553

303E2, 303.5E2 CR, 304E2 CR 162-266 (357-586) 271-553 (11-22) 271-553 271-553

305E2 CR, 305.5E2 CR 170-273 (374-601) 271-553 (11-22) 271-553 271-553

301.4C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.7D 303E2, 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

177-282 (389-622) 271-553 (11-22) 271-553 271-553

307E2,308E2 CR SB 415-882 (915-1945) 306-884 (11-35) 306-884 306-884

COUPLERS

Our Dual LockTM Pin Grabber Couplers allow operators to change attachments in seconds, increasing job efficiency and enabling one machine to do multiple tasks. We offer two, easy-to-use options: hydraulic (controlled from the cab) and mechanical. And all Cat models include primary and secondary locking systems to ensure what you put on your machine, stays on.

Attachment Models Machine Models kg (lb)

Mechanical Dual LockTM Coupler 301.4C-308E2 CR SB 14-89 (32-195)

Hydraulic Dual LockTM Coupler 303E CR, 308E2 CR SB 41-93 (90-205)

Hydraulic Dual LockTM Tilt Coupler 305E2 CR-308E2 CR SB 112-198 (245-436)

Move quickly from task to task.

Specifications

Mini Excavators

301.4C 301.7D CR 302.4D 303E CR 304E2 CR 305.5E2 CR 308E2 CR SB301.7D 302.2D 302.7D CR 303.5E2 CR 305E2 CR 307E2

6

FLAIL MOWERS

Specifications

High performance, down to a science.

Cat Flail Mowers are designed for high performance cutting of vegetation, saplings, and undergrowth from overgrown agricultural areas, retention ponds, and forested terrain. The hydraulic flail mowers reduce weeds, saplings, shrubs and small trees into mulched material, making them ideal for environmental maintenance applications, such as mowing along ditches, fence rows and retention ponds, controlling overgrowth, and cleaning up high banks and slopes.

7

Model Machine Models Overall Width Working Width Swinging Teeth Per Drum

mm (in) mm (in)

HMF110 305E2 CR, 305.5E2 CR 1184 (47) 1000 (40) 16

HMF210 308E2 CR 1184 (47) 1000 (40) 16

*Requires a drain kit and guarding on machine.

Mini Excavators

305E2 CR 308E2 CR305.5E2 CR

98

HAMMERS

Separate the toughest surfaces.

Our hammers were designed for hard hits, reducing rock and concrete materials. Each features an automatic shut-off and buffering system to reduce machine vibrations. And some of our hammers are fully enclosed to suppress noise.

* Operating weight includes hammer, standard tool and mounting bracket.† Pin-on model

Attachment Models

Machine Models Operating Weight* Impact Frequency

Tool Diameter

kg (lb) bpm mm (in)

H25D 300.9 70 (154) 1000-1900 36 (1.42)

H35E, H35Es 301.4C-302.4D 125-130 (276-287) 600-1800 40 (1.57)

H45E, H45Es 301.4C-302.7D CR 145-250 (320-551) 780-1800 50 (1.97)

H55E† 302.7D CR-305.5E2 CR 220-315 (485-695) 600-1680 58 (2.28)

H55E 302.7D CR-305.5E2 CR 250-340 (551-750) 600-1680 58 (2.28)

H55Es 302.7D CR-305.5E2 CR 260-345 (573-761) 600-1680 58 (2.28)

H65E† 303E CR-305.5E2 CR 260-355 (573-783) 720-1740 68 (2.68)

H65E 305E2 CR-308E2 CR SB 305-380 (673-838) 720-1740 68 (2.68)

H65Es 305E2 CR-308E2 CR SB 315-390 (695-860) 720-1740 68 (2.68)

H75Es 307E2-308E2 CR SB 480-500 (1058-1103) 840-1650 74.5 (2.93)

H95Es 307E2-308E2 CR SB 600-730 (1323-1610) 700-1260 87.5 (3.44)

Specifications

Mini Excavators

300.9D 301.7D 302.2D 302.7D CR 303.5E2 CR 305E2 CR 307E2301.4C 301.7D CR 302.4D 303E CR 304E2 CR 305.5E2 CR 308E2 CR SB

MULCHERS

Specifications

Reclaim overgrown foliage.

Cat Mulchers are designed for high performance cutting and mulching of vegetation, saplings, and undergrowth from overgrown agricultural areas and forested terrain. The hydraulic mulchers reduce saplings, shrubs and trees into mulched material, making it ideal for environmental maintenance, such as brush clearing and creating fire lanes. Other applications include: reclaiming untilled land, removing foliage from building construction sites and shredding pruned material and organic waste for biomass production.

Model Machine Models Overall Width Working Width Fixed Teeth

Per Drum

mm (in) mm (in)

HM208 308E2 CR 1026 (40) 818 (32) 15

HM210 308E2 CR 1026 (48) 1012 (40) 18

*Requires a drain kit, electrical switch and guarding on machine.

Mini Excavators

308E2 CR

1110

SHEARS

Minimize metal.

Our shears rotate 360 degrees for rapid repositioning and are designed with a straight, lower jaw to improve the cutting force.

Attachment Model

Machine Models Throat Force Weight (boom-mount)

Jaw Opening

Jaw Depth

kN (Sh Ton) kg (lb) mm (in) mm (in)

S305 304E2 CR-308E2 CR SB 1812 (204) 608 (1,340) 240 (9.4) 290 (11.4)

Specifications

Mini Excavators

304E2 CR 305.5E2 CR 308E2 CR SB305E2 CR 307E2

RIPPERS

Tear up more terrain.

Built to cut through dense dirt, loosen rocky soil and break below the frost layer, Cat rippers are taking on some of the most challenging ground conditions. And because they’re made for specific Cat models, they can better transfer machine power into ripping power.

Attachment Models(Shank Length)

Machine Models Width Height Tip Radius Weight

mm (in) mm (in) mm (in) mm (in) kg (lb)

490 (19) 303E CR, 304E2 232 (9.1) 660 (25.9) 650 (26) 45 (99)

676 (27) 305E2 CR, 305.5E2 CR 273 (10.7) 825 (32.4) 810 (32) 61 (134)

861 (34) 307E2, 308E2 CR SB 346 (13.6) 1074 (42.2) 1039 (41) 107 (235)

Specifications

Mini Excavators

303E CR 304E2 CR 305.5E2 CR 308E2 CR SB303.5E2 CR 305E2 CR 307E2

1312

VIBRATORY PLATE COMPACTORS

Pack with power.

Cover more ground with our vibratory plate compactor’s large surface and pack soil faster with its high-power pulses. We’ve even built in flexible isolators to guard against excessive vibrations.

Attachment Models

Machine Models Impulse Force Cycles Base Plate Width

kN (lbf) min mm (in)

CVP16 302.7D CR-305.5E2 CR 16 (3650) 2200 305 (12)

CVP40 307E2, 308E2 CR SB 40 (8928) 2200 584 (23)

Specifications

Mini Excavators302.7D CR 303.5E2 CR 305E2 CR 307E2303E CR 304E2 CR 305.5E2 CR 308E2 CR SB

THUMBS

Go from digging to material handling.

Our thumbs work with buckets to grab, pick or sort material. They’re hydraulically controlled from the cab, opening and closing around loads. And when you don’t need it, the thumb can recline against the machine stick.

Machine Models Thumb Style Overall Width Stored Height For Use with

CouplerNumber of Tines Rotation

mm (in) mm (in)

302.4D302.7D CR Hydraulic 373 (14.68) 271 (10.7) Yes 2 126.6°

303E Hydraulic 340 (13.4) 310 (12.2) Yes 2 116.8˚

303.5E2 CR Hydraulic 399 (15.7) 307 (12.1) Yes 2 116.8˚

304E2 CR Hydraulic 364 (14.0) 281 (11.0) Yes 2 116.8˚

305E2 CR Hydraulic 386 (15.2) 272 (10.7) Yes 2 131˚

305.5E2 CR Hydraulic 477 (18.8) 278 (11) Yes 2 131˚

307E2 308E2 CR SB

Hydraulic 458 (18.0) 466 (18.3) No 2 133˚

Hydraulic 458 (18.0) 556 (21.9) Yes 2 133˚

Stiff Link 458 (18.0) 466 (18.3) No 2 81˚

Stiff Link 458 (18.0) 556 (21.9) Yes 2 81˚

Pro Plus Series 458 (18.0) 526 (20.7) No 2 181˚

Pro Plus Series 458 (18.0) 799 (31.5) Yes 2 174˚

Specifications

Mini Excavators

302.4D 303E CR 304E2 CR 305.5E2 CR 308E2 CR SB302.7D CR 303.5E2 CR 305E2 CR 307E2

1514

Choosing the right GET is critical. Each is engineered to maximize machine performance in specific applications, reducing resistance while boring, digging or scraping. Our GET also protect heavy-wear areas, extending attachment life and lowering maintenance costs.

GROUND ENGAGING TOOLS (GET)

AUGER BITS

Standard Bit• Factory standard• For drilling holes with a large diameter

Tree Bit• Tapered tip• For drilling holes with a large mouth and narrow

base to properly fit a root ball or holes with a small diameter to fill with mulch or fertilizer

Industrial Bit• Excellent tooth retention while digging• Allows for easy removal and installation

Standard Rock Drill Head Bit • Transforms a standard bit into an industrial bit• For severe ground conditions including rock and

various types of concrete• Bolt-on design for easy removal when returning

to normal conditions

Auger bit sizes range from 152 to 914 mm (6 to 36 in) in diameter to a depth of approximately 1270 mm (50 in). Stackable extensions range from 305 to 1829 mm (12 to 72 in) in length and are available to enable deeper drilling.

Diameter Standard Industrial Rock Head Standard

Rock Head Bolt On Tree Bit

6 inch 153-4083 372-0260 – 372-0230 –

9 inch 153-4084 372-0261 – 372-0231 –

12 inch 153-4085 372-0262 372-0232 – –

15 inch 366-7752 – – 372-0233 –

16 inch – 372-0263 – – –

18 inch 153-4086 372-0264 372-0234* – –

24 inch 153-4089 372-0265* 372-0235* – 153-4092

30 inch 217-3194* – – – –

36 inch 153-4091* – – – 153-4095

*Not compatible with A7B Auger Model

Wide• Low penetration• Low impact applications• Use to smooth ground surfaces

Extra Duty• Moderate penetration• Use in moderate impact applications• More wear material

General Duty• Moderate penetration• Moderate impact and abrasive conditions

Penetration Plus• Good penetration• Moderate to high impact applications

Penetration• Very good penetration• Moderate impact and lower abrasive conditions• Less wear material

Double Spike• Very good penetration• Use on fracturable materials• Install in corner positions with spike centers

Spike• Excellent penetration• Use on cohesive materials • Less wear material

BUCKET TEETH

1716

Description J200 J225

Pin 8E-6208 6Y-3228

Retainer 8E-6209 8E-6259

Long 1U-3202 6Y-3222

Light Duty Long 195-9209 –

Short – 6Y-6221

Wide 109-9200 186-3010

Penetration 1U-3209 6Y-8229

Sharp Corner 9W-8208 6Y-7228

Sharp Center 9W-8209 6Y-7229

Sharp Twin 135-8208 135-8228

Heavy Duty Long – 8E-4222

Heavy Duty Abrasion – 6Y-6223

Abrasion 4T-2203 –

Heavy Duty Pin 8E-6208 132-4762

Heavy Duty Retainer Assembly 8E-6209 149-5733

QUICK REFERENCEFind attachments made for your work.

Machine model availability and attachments vary by region. Please contact your local Cat dealer for availability.

18

Augers Buckets Compaction Wheels Couplers Flail

Mowers Hammers Mulchers Rippers Shears Thumbs Vibratory Plate Compactors

Agriculture x x x x x x x x

Concrete Prep and Flatwork x x x x x

Excavation and Earth Moving x x x x x

Finishing and Site Clean-Up x x x x x x x

Landscaping x x x x x x x

Material Handling x x x

Rental x x x x x x x x x x x

Residential and Commercial Construction

x x x x x x x x x

Site Prep and Demolition x x x x x x

Trenching and Utilities x x x x x x x x

19

QUICK REFERENCEFind attachments made for your machine.

Machine model availability and attachments vary by region. Please contact your local Cat dealer for availability.

20

Augers Buckets Compaction Wheel Couplers Flail

MowerHydraulic Hammers Mulchers Rippers Shears Thumbs

Vibratory Plate

Compactors

Machine Models Digging Ditch Cleaning

Tilting Ditch

Cleaning

Heavy Duty

Heavy Duty

Capacity

Heavy Duty Rock

Dual Lock™

Dual Lock™ Tilting

300.9D x x x

301.4C x x x x x x x

301.7D, 301.7D CR x x x x x x x

302.2D, 302.4D x x x x x x x x

302.7D CR x x x x x x x x x

303E CR, 303.5E2 CR x x x x x x x x x x

304E2 CR x x x x x x x x x x x

305.5E2 CR, 305E2 CR x x x x x x x x x x x x x x x

307E2, 308E2 CR SB x x x x x x x x x x x x x x

21

WORK WITHOUT WORRY.We back our attachments with a one-year warranty and ongoing Cat dealer support. It’s another way we’re helping protect what you rely on.

2322

PARTS LIST

AUGERS

Diameter

A7B

A14B A19B A26BStandard Stick Long Stick

301.4C301.7D301.7D CR

218-3205 218-3206 – – –

302.2D302.4D302.7D CR

218-3207 218-3197 – –

303E CR303.5E2 CR304E2 CR

– 218-3198 220-7137 –

305E2 CR305.5E2 CR – – 275-1000 275-1001

307E2308E2 CR SB – – – 313-1460

BUCKETS – DIGGING

Model9"

(229mm)10"

(254mm)12"

(305mm)16"

(406mm)18"

(457mm)20"

(508mm)24"

(610mm)27"

(686mm)28"

(457mm)

301.4C301.7D301.7D CR

147-1014 – 147-1018 147-1020 190-7387 147-1023 147-1026 – –

302.2D302.4D – 396-9302 396-9303 396-9304 396-9305 396-9306 396-9307 – 396-9308

302.7D CR – 176-7283 153-7851 153-7854 190-7390 153-7857 153-7860 190-7391 –

BUCKETS – DITCH CLEANING

Model

STANDARD

28" (711mm)

32" (813mm)

40" (1,016mm)

47" (1,194mm)

48" (1,219mm)

51" (1,295mm)

54" (1,372mm)

300.9D 373-4458 – – – – – –

301.4C301.7D301.7D CR

– 147-1029 147-1031 – – – –

302.2D302.4D302.7D CR

– 153-7863 153-7865 153-7867 – – –

303E CR303.5E2 CR304E2 CR

– – 279-4322 279-4323 – – –

305E2 CR305.5E2 CR – – 279-4326 – – 279-4327 –

307E2308E2 CR SB – – – – 306-5664 – 306-5662

Model

STANDARD TILTING

55" (1,397mm)

60" (1,524mm)

63" (1,600mm)

43" (1,092mm)

47" (1,194mm)

63" (1,600mm)

300.9D – – – – – –

301.4C301.7D301.7D CR

– – – – – –

302.2D302.4D302.7D CR

– – – 246-0094 – –

303E CR303.5E2 CR304E2 CR

282-9315 – – – 279-4325 –

305E2 CR305.5E2 CR – – 279-4328 – – 274-9022

307E2308E2 CR SB – 306-5660 – – – –

AUGER EXTENSIONS

1 Foot (305mm) 2 Feet (610mm) 3 Feet (914mm) 6 Feet (1,829mm)

156-6328 217-3192 372-0256 372-0257

AUGER ADAPTERS

Hex-to-Round Round-to-Hex

156-6329 217-3191

2524

PARTS LIST (C0NT)

BUCKETS – HEAVY DUTY

Model12"

(305mm)13"

(330mm)16"

(406mm)18"

(457mm)20"

(508mm)24"

(610mm)30"

(762mm)36"

(914mm)

303E CR303.5E2 CR304E2 CR

464-9900 – 464-9901 464-9902 464-9903 464-9904 303-1329

464-9905 464-9906

305E2 CR305.5E2 CR 464-9907 – 303-

1311464-9908 464-9909 303-

1313464-9910 464-9911 303-

1315464-9912 464-9913

302.7D CR308E2 CR SB – 305-6813 – 295-5951 – 295-

5952

HD Rock295-5970

295-5953

HD Rock295-5971

295-5954

BUCKETS – MUD GRADING

Model 39" (991mm) 47" (1,194mm) 59" (1,499mm)

301.4C301.7D301.7D CR

388-9661 – –

302.2D302.4D302.7D CR

388-9662 – –

303E CR303.5E2 CR304E2 CR

– – –

305E2 CR305.5E2 CR

– 388-9664 388-9665

307E2308E2 CR SB

388-9666 388-9667

BUCKETS – HEAVY DUTY CAPACITY

Model12"

(305mm)16"

(406mm)18"

(457mm)20"

(508mm)24"

(610mm)30"

(762mm)36"

(914mm)

303E CR303.5E2 CR 303-1330 464-9914 464-9915 464-9916 464-9917 464-9918 464-9919 303-1336 464-9920

BUCKETS – PIN LOCK GRABBER

Model

12" (305mm) 16" (406mm) 18" (457mm)

HEAVY DUTY

HIGH CAPACITY

HEAVY DUTY

HIGH CAPACITY

HEAVY DUTY

HIGH CAPACITY

307E2308E2 CR SB 247-1947 247-1953 247-1948 247-1954 247-1949 247-1955

Model

24" (610mm) 30" (762mm) 36" (914mm)

HEAVY DUTY

HIGH CAPACITY

HEAVY DUTY

HIGH CAPACITY

HEAVY DUTY

HIGH CAPACITY

307E2308E2 CR SB 247-1950 247-1956 247-1951 247-1957 247-1952 247-1958

BUCKETS – PIN-ON DIGGING

Model 10" (254mm) 14.6" (371mm)Set of 10” (254mm), 14.6” (371mm)

and 27.6” (701mm)

300.9D 373-4456 373-4457 373-4460

QUICK COUPLERS

Model

Dual Lock Coupler

Dual Loack Tilt Coupler Pin Lock

Coupler

Pin Grabber Coupler

Hydraulic Lines Pins

Manual Hydraulic Hydraulic

301.4C301.7D301.7D CR

361-1092 – – – – – –

302.2D302.4D302.7D CR

361-1093 – – – – – –

303E CR303.5E2 CR304E2 CR

444-7494 361-1095 – – - 373-2370,384-5013 154-2638

305E2 CR305.5E2 CR

444-7496 361-1097 455-6000 – – 373-2375,384-5015 282-2785

307E2308E2 CR SB

444-7498 361-1099 455-6100 485-0314 311-0509 373-4405 308-0324

2726

PARTS LIST (C0NT)

HAMMER UNIT

Model H25D H35E H35Es H45E H45Es H55E Pin On H55E H55Es H65E

Pin On H65E H65Es H80E H80Es H95Es

300.9D 372-1528 – – – – – – – – – – – – –

301.4C – 437-5743 417-9011 – – – – – – – – – – –

301.7D – 437-5743 417-9011 – – – – – – – – – – –

301.7D CR – – – 437-5729 417-8977 – – – – – – – – –

302.2D – 437-5743 417-9011 437-5729 417-8977 – – – – – – – – –

302.4D – 437-5743 417-9011 437-5729 417-8977 – – – – – – – – –

302.7D CR – – – 437-5729 417-8977 437-5717 437-5185 417-8948 – – – – – –

303E CR – – – – – – – – – – – – – –

303.5E2 CR – – – – – 437-5717 437-5185 417-8948 438-3419 – – – – –

304E2 CR – – – – - 437-5717 437-5185 417-8948 438-3419 – – – – –

305E2 CR – – – – – 437-5717 437-5185 417-8948 438-3419 435-5318 415-1112 – – –

305.5E2 CR – – – – – 437-5717 437-5185 417-8948 438-3419 435-5318 415-1112 – – –

307E2 – – – – – – – – – 435-5318 415-1112 465-5624 457-0158 369-0786

308E2 CR SB – – – – – – – – – 435-5318 415-1112 465-5624 457-0158 369-0786

* You will need to purchas addition parts for each model (mounting bracket, tool, connecting lines)

PARTS LIST (C0NT)

2928

3130

PARTS LIST (C0NT)

VIBRATORY PLATE COMPACTOR

ModelCompactor Plate

Backfill Blade

Swivel Mount-ing

BracketConnecting Len

CVP16 CVP40 CVP16 CVP40

303E CR303.5E2 CR304E2 CR

222-3780 – 222-6443 265-7461 – 438-7184 203-0998

303E CR303.5E2 CR304E2 CR

222-3780 – 222-6443 265-7461 – 437-3584 203-0977 203-0981 203-0983

305E2 CR305.5E2 CR 222-3780 – 222-6443 265-7461 – 437-8462 203-0983

307E2308E2 CR SB – 205-5900 211-8200 – 264-5907 394-2330 325-3832

RIPPERS

Model Ripper

303E CR303.5E2 CR304E2 CR

453-8570

305E2 CR305.5E2 CR 453-8571

307E2308E2 CR SB 453-8572

SHEARS

Model Scrap Shear

Mounting Brackets

Connector Lines

303E CR303.5E2 CR304E2 CR

171-5495 370-2182 231-7108

305E2 CR305.5E2 CR 171-5495 283-4187,

449-9083 231-7108

307E2308E2 CR SB 171-5495 318-4863 359-9831

THUMBS

Model Hydraulic Stiff Link

303E CR303.5E2 CR304E2 CR

451-6380 –

303E CR303.5E2 CR304E2 CR

452-2740 –

305E2 CR305.5E2 CR 452-9816 –

307E2308E2 CR SB 305-6740, 305-6741, 305-6744, 305-6745 305-6742, 305-6743