38
WKWSCI Guide for Thesis/Dissertation Format This guide sets forth the thesis requirements established by the Wee Kim Wee School of Communication and Information, Nanyang Technological University. The thesis should be prepared in accordance with the instructions of the guide. I. Layout Requirements 1. Paper High-quality, long-lived, acid-free (neutral pH) bond paper must be used for the thesis. To confirm that the paper is acid-free, please check the packaging. All copies must be on white, 8.5 x 11 inch A4 paper. 2. Printing and Copying Single-sided copies are submitted for ring-bound copy. For hardbound copy, the two sample pages in the attached format should be printed on single pages. From the content page onwards preferably the pages could be printed double-sided, if possible, to reduce the thickness. Printing defects (e.g., skewing, blotches, roller tracks, etc.) must be avoided. Laser printers are strongly recommended. 3. Typeface Times New Roman is the preferred font. Do not use script, or ornamental fonts. For general text, the font size should be 12-point for text and 10-point for footnotes and subscripts. Size, font of the title and heading 1

FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Embed Size (px)

Citation preview

Page 1: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

WKWSCI Guide for Thesis/Dissertation Format

This guide sets forth the thesis requirements established by the Wee Kim Wee School of Communication and Information, Nanyang Technological University. The thesis should be prepared in accordance with the instructions of the guide.

I. Layout Requirements

1. Paper

High-quality, long-lived, acid-free (neutral pH) bond paper must be used for the thesis. To confirm that the paper is acid-free, please check the packaging.

All copies must be on white, 8.5 x 11 inch A4 paper.

2. Printing and Copying

Single-sided copies are submitted for ring-bound copy. For hardbound copy, the two sample pages in the attached format should be

printed on single pages.  From the content page onwards preferably the pages could be printed double-sided, if possible, to reduce the thickness.   

Printing defects (e.g., skewing, blotches, roller tracks, etc.) must be avoided. Laser printers are strongly recommended.

3. Typeface

Times New Roman is the preferred font. Do not use script, or ornamental fonts. For general text, the font size should be 12-point for text and 10-point for

footnotes and subscripts. Size, font of the title and heading

o The thesis title should be centered uppercase bolded 16-point as follows:

COMPUTER-MEDIATED SOCIAL SUPPORT: 

INTERNET USE AND INTERNATIONAL MIGRANTS

o Chapter title should be centered uppercase bolded 14-point as follows:

CHAPTER FOUR        METHODOLOGY  

o Level 1 heading should be centered uppercase and lowercase as follows:

Research Design

1

Page 2: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

o Level 2 heading should be centered, italicized, uppercase and lowercase as follows:

Survey

o Level 3 heading should be flush left, italicized, uppercase and lowercase

side as follows:

Telephone Survey

o Level 4 heading should be indented, italicized, lowercase paragraph ending with a period as follows:

Sampling.

Refer to APA Manual (5th edition) Page 111-115 for detail. See Appendix A for a sample title page, Appendix B for a Chapter page, Appendix C for a sample heading and subheading page.

Use italics for titles of books, periodicals, and microfilm publications.Refer to APA Manual (5th edition) Page 100-102 for detail.

Print must be letter quality or near letter quality with dark black characters that are consistently clear, crisp, and easily read.

Accent marks and hand annotations must be done neatly in black ink.

4. Margins

Margins on the binding edge (left edge if single-sided; right edge for even numbered pages, and left edge for odd numbered pages if double-sided) must be 3.7cm; all other margins must be one inch. (Pagination, headers, and/or footers may be placed within the margin, but no closer than one-half inch from the edge of the page.)

The text should be justified left in order to avoid large gaps in text which sometimes occur with full justification.

5. Spacing and Indents

One and a half space is required in the main body of the manuscript except where conventional usage calls for single spacing; e.g., footnotes, indented quotations, tables, etc.

Single-space each bibliographical entry and one and half space between entries. The first line of paragraphs or footnotes should be indented uniformly throughout

the thesis. A standard indent is eight spaces (1/2 inches). Single-spaced quotations are indented in their entirety four spaces from the left

margin (1/4 inches).

2

Page 3: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

6. Word and Text Divisions

Words must be divided correctly at the end of a line and may not be divided from one page to the next. Use a standard dictionary to determine word division.

Avoid short lines that end a paragraph at the top of a page, and any heading or subheading at the bottom of a page that is not followed by text.

7. Pagination

Each page of the thesis, including all blank pages, and pages with photographs, tables, figures, maps, and computer program printouts should be assigned a number.

Page numbers should be centered at bottom of the page. Consistent placement of pagination, at least one-half inch from the paper’s edge, should be used throughout the thesis.

Important: The following pagination plan should be used:o For the preliminary pages (abstract, table of contents, list of tables, graphs,

illustrations, and preface), use small Roman numerals (i, ii, iii, iv, etc.). The title page does not have a number but counts as page i; the following page is ii.

o For the remainder of the manuscript, use continuous pagination for text, illustrations, images, appendices, and bibliography, using Arabic numbers (1, 2, 3, etc.). Remember to start with page 1, as this is not a continuation of the Roman numeral numbering.

II. Order and ContentThe content of the thesis should be ordered as follows.1. Preliminary Pages

a. Title Page Use upper case letters for title and author’s name. The title of the thesis should

be a meaningful description of the content of the manuscript. Use word substitutes for formulas, symbols, superscripts, subscripts, Greek letters, etc.

As mentioned above, the title page is counted but not numbered. The name of the degree that appears on the title page must be the official

names of the degrees awarded by this University. No variations are allowed. The year of the submission of the thesis is used as the date. The final dissertation should be hard-cover bounded using a Dark Blue cover

with Gold letterings (not exceeding 16 pts). The author's name is abbreviated on the spine in the order of: full surname and initials of middle and first names. The title may need to be abbreviated if it is too long to fit the spine. Get the approval from your supervisor on the abbreviated title.

See Appendix A2 AND A3 for sample title pages of a thesis.

3

Page 4: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

b. Acknowledgments. Softcopy does not require Acknowledgment but hardcopy does require

Acknowledgement. Centre the heading ACKNOWLEDGMENTS at the top of the page, one and

half space, and begin the remarks.See Appendix D for a sample Acknowledgement.

c. Table of Contents, with page references. The Table of Contents lists all sections that follow it. Chapter or section titles

and primary and secondary subdivisions should be listed exactly as they appear in the text, along with page numbers.

Type TABLE OF CONTENTS centered at the top of the page, one and half space and begin the entries. Single space within entries and one and half space in between entries. Figures and Tables are listed separately.

See Appendix E for a sample Table of Contents.

d. List of Tables, with titles and page references. List the number, caption, and page number of each table, including any found

in the appendices. Tables should be numbered consecutively throughout.See Appendix F for a sample List of Tables.

e. List of Figures. Include charts, graphs, illustrations, diagrams, maps, pictures, photographs

and other similar non-text items. List the number, caption, and page number of each figure, including any

found in the appendices. Figures should be numbered consecutively throughout. See Appendix G for a sample List of Figure.

f. List of Abbreviations (or List of Symbols, or Nomenclature)Optional, include if necessary.

g. Abstract The abstract is a succinct summary of the dissertation. It should state the

problem, describe the methods and procedures used, and give the main results or conclusions of the research.

Although it may extend beyond one page, the abstract should not exceed 500 words.

The abstract should be printed out on one side of the paper only, one and half -spaced, and typed or printed on the same high-quality paper used for the body of the thesis.

See Appendix H for a sample Abstract.

2. Text

4

Page 5: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

a. Introduction.b. Main body, with the larger divisions and more important sub-divisions indicated by suitable, consistent headings.

3. References

a. Appendices. Material that supports the research, but is not essential to an understanding of

the text, is placed in the appendices. Examples include raw data, extensive quotations, and survey or test instruments.

Appendices should be designated A, B, C, etc. If there is only one appendix, it is simply called Appendix, not Appendix A. Each appendix and its title (for example, Appendix A, Raw Data for Time-to-Degree) are listed in the Table of Contents.

All material included in the appendices must meet minimum font and margin requirements.

See Appendix I for a sample Appendix.

b. Bibliography or List of References.See Appendix J for a reference list of a thesis.

III. Tables, Figures, Photographs, Maps, and Charts

1. Tables and Figures

Tables and figures are placed immediately after their first mention in the text, either on a text page or on a separate sheet. They may be numbered consecutively within each chapter or throughout the thesis.

Number all tables or figures with Chapter numerals and Arabic numerals (e.g., within Chap 4, figure should be labeled Figure 4.1), or number with Arabic numerals throughout the thesis in the order in which the tables or figures are first mentioned in text. (e.g., Table 1, Table 2… )

Identify the tables or figures of the appendix with capital letters and Arabic numerals (e.g., Table A1 is the first table of Appendix A or of a sole appendix, which is not labeled with a letter; Table C2 is the second table of Appendix C).

Tables that will not fit within the required margins may be typed in a smaller font or may be reduced; they also may be printed broadside with the top of the table toward the left margin. If figures or tables are too large to be reduced satisfactorily, they should either be split into several pages or be redone. Long tables may be single-spaced, and text may be slightly reduced.

Headings of tables should be placed at the top of the table. Captions of figures should be placed at the bottom of the figure.

Horizontal figures and tables (i.e., those landscaped on the page) must be positioned correctly and bound at the top, so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same

5

Page 6: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

orientation as the figure or table. Page numbers are always placed as if the figure were vertical on the page.

Table titles and footnotes may appear above or below the table, but should be consistent throughout the document. Table footnotes have no relation to text footnotes.See Appendix K for a sample Table. See Appendix L for a sample Figure.

2. Photographs, Maps, and Charts

All photographs should be of professional quality. Mount non-digital photographs with spray adhesive, or double-sided contact paper used for photo mounting.

Large maps and charts should be avoided. Where necessary, they must be folded to 10.5 x 7.5 inches or smaller; they will be in pockets in the bound thesis.

Use of colors in graphs, charts, or maps is to be avoided since they are not distinguishable in microfilm copies. Other techniques for indicating differences within graphs, charts, and maps such as cross-hatching should be used.

IV. Footnotes

Textual notes that provide bibliographic reference, supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as a footnote. Lengthy footnotes may be continued on the next page.

Footnote numbering can be continuous throughout the thesis, or may start again for each chapter or page, but the method must be consistent.

Footnotes may be single-spaced within each entry, but must be one-and-half-spaced between each entry.See Appendix M for a sample Footnotes.

V. Scholarly Reference

Select APA style (5th edition) and use it consistently.

VI. Length

Students should keep in mind that the School deplores overlong and wordy theses. Unless otherwise determined by the Board of Graduate Studies,

A Master’s thesis should not exceed 40,000 words (including footnotes, but excluding appendices, bibliography, maps, charts, statistical tables, graphs, illustrations)

A doctoral thesis should not exceed 80,000 words (including footnotes, but excluding appendices, bibliography, maps, charts, statistical tables, graphs, illustrations, etc.)

6

Page 7: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

VII. Related Statue of Nanyang Technological University

Master’s candidates please refer to Statute 18; PhD candidates please refer to Statute 19.

EXTRACT OF ST ATUTE 18 DEGREES OF MASTER

(1) The thesis must contain a summary not exceeding 500 words written in the English language and in a form suitable for publication.

(2) All theses must normally be written in English, unless the prior approval of the Board of Graduate Studies has been obtained at the time of admission for a thesis to be written in a language other than English.

(3) Where a thesis is written in a language other than English, it must contain a summary not exceeding 500 words written in that language and in a form suitable for publication in addition to a summary not exceeding 500 words written in the English language and in a form suitable for publication.

(4) One copy of the thesis will be deposited in the University Library. Copies of theses, whether approved or not, become the property of the University.

(5) Copies of theses must be submitted in the form given below:

(a) Each copy must be cyclostyled or printed, bound with hard covers in international size A4 (210mm x 297mm).

(b) Each page must have a margin of 3.7cm to allow for binding.

(c) The thesis must be preceded by the following in the order given: title page, acknowledgements, table of contents, summary, all of which must be bound with the thesis.

(d) The title and author’s name must be given in block letters on the cover of the thesis.

(e) The title or an abbreviation thereof and the author’s name must be given on the spine of the thesis.

(f) The thesis must be bound in dark blue with gold lettering not exceeding 16 pts.

(g) Pages must be numbered in one continuous sequence in arabic numerals. Where a thesis consists of more than one volume, one sequence must be used.

7

Page 8: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

(6) The thesis should not exceed the following number of words:

(a) In the Nanyang Business School, School of Communication and Information and the National Institute of Education, a Master’s thesis should not exceed 40,000 words (including footnotes, but excluding appendices, bibliography, maps, charts, statistical tables, graphs, illustrations), except that a Master’s thesis written in the Chinese language should not exceed 150,000 Chinese characters.

(b) In the School of Computer Engineering, the School of Materials Engineering, the School of Civil and Environmental Engineering, the School of Electrical and Electronic Engineering, and the School of Mechanical and Production Engineering, a Master’s thesis should not exceed 30,000 words (subject to the same exclusions as given in paragraph (a) of this sub-clause).

EXTRACT OF ST ATUTE 19 DEGREES OF DOCTOR OF PHILOSOPHY

(1) The thesis must contain a summary not exceeding 500 words written in the English language and in a form suitable for publication.

(2) All theses must normally be written in English, unless the prior approval of the Board of Graduate Studies has been obtained at the time of admission for a thesis to be written in a language other than English.

(3) Where a thesis is written in a language other than English, it must contain a summary not exceeding 500 words written in that language and in a form suitable for publication in addition to a summary not exceeding 500 words written in the English language and in a form suitable for publication.

(4) One copy of the thesis will be deposited in the University Library. Copies of theses, whether approved or not, become the property of the University.

(5) Copies of theses must be submitted in the form given below:

(a) Each copy must be cyclostyled or printed, bound with hard covers in international size A4 (210mm x 297mm).

(b) Each page must have a margin of 3.7cm to allow for binding.

(c) The thesis must be preceded by the following in the order given: title page, acknowledgements, table of contents, summary, all of which must be bound with the thesis.

8

Page 9: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

(d) The title and author’s name must be given in block letters on the cover of the thesis.

(e) The title or an abbreviation thereof and the author’s name must be given on the spine of the thesis.

(f) The thesis must be bound in dark blue with gold lettering not exceeding 16 pts.

(g) Pages must be numbered in one continuous sequence in arabic numerals. Where a thesis consists of more than one volume, one sequence must be used.

(3) Unless otherwise determined by the Board of Graduate Studies, the thesis should not exceed the following number of words:

(a) In the Nanyang Business School, School of Communication and Information and the National Institute of Education, the thesis should not exceed 80,000 words (including footnotes, but excluding appendices, bibliography, maps, charts, statistical tables, graphs, illustrations, etc.), except that thesis written in the Chinese language should not exceed 300,000 Chinese characters.

(b) In the School of Computer Engineering, the School of Materials Engineering, the School of Civil and Environmental Engineering, the School of Electrical and Electronic Engineering, and the School of Mechanical and Production Engineering, the thesis should not exceed 40,000 words (subject to the same exclusions as given in paragraph (a) of this sub-clause).

The Library would like a soft-copy of the thesis to build up an electronic collection of NTU theses and dissertations for easy reference by staff and students.  The procedure on how to submit can be found at http://www.ntu.edu.sg/library/collections/Pages/DRNTU.aspx .  

9

Page 10: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix A2. Sample of Front Cover (dark blue) of in Hard Bound Dissertation

COMPUTER-MEDIATED SOCIAL SUPPORT:INTERNET USE AND INTERNATIONAL IMMIGRANTS

CHEN WENLI

WEE KIM WEE SCHOOL OF COMMUNICATION AND INFORMATION

2005

TITLE OF R

ESEAR

CH

(On the Spine)

NA

ME

(if insufficient space, use abbreviationseg. K

AN

G K

.)Y

EAR

10

Page 11: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix A3. Sample of first page in hard-bound copy

Computer-Mediated Social Support:

Internet Use and International Immigrants

Chen Wenli

Wee Kim Wee School of Communication & Information

A thesis submitted to the Nanyang Technological University in fulfillment of the requirement for the degree of

Doctor of Philosophy

2005

11

Page 12: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix B. Chapter Page Sample

CHAPTER THREE METHODOLOGY

As discussed in the first chapter, the objective of this study is twofold. First, it aims to

investigate the nature of CMSS and the migrants’ behavior of participation in CMSS.

Second, it aims to examine the function of CMSS in the adaptation process of migrants.

The study applies a comprehensive research methodology that incorporates more than

one research method to achieve the objective. This chapter details the methodology

employed in this study, including its design, sampling approach and procedures, and the

data analysis method.

This study employs three data collection methods, namely, online field

observation, survey and in-depth interviews. These three methods complement each other

in terms of satisfying the study’s objective. Online field observation helps to gain insights

into the content of CMSS exchanged online and the participation behavior of migrants. It

is also valuable for refining the research model and developing the questionnaire for the

survey. The survey is the main research method employed in the study and is used to

answer the research questions and test the hypotheses. In-depth interviews enrich the

study by providing qualitative information that cannot be directly observed by other

means (Patton, 1990).

Online Field Observation

Field observation is a research method used to observe the object of a study in its natural

setting. Following well-specified procedures, researchers record events in their

observations and is uninfluenced by the description or interpretation of others. In this

study, the particular events are identified as the messages posted on two forums that are

popular among Chinese migrants in Singapore. Careful attention is paid to the messages.

This increases the likelihood of uncovering how social support is achieved through

interaction (Burleson et al., 1994). Findings from the online field observation serve as the

basis for the questionnaire items in the survey.

12

Page 13: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix C. Sample of page with Heading and subheadings

Survey

Survey is the main method employed in this study. Based upon insights gained from the

field observation, a questionnaire was developed with the primary objectives of

answering the research questions and testing the hypotheses of this study. The

questionnaire was used in two surveys, namely, telephone survey and web survey. This

is primarily aimed at reaching different target groups – migrants and international

students.

The web survey served as a supplement to the telephone survey. The potential

respondents of the web survey are Chinese students in Nanyang Technological University

(NTU). These names were obtained from NTU’s mailing list. However, most of these

students do not have a fixed telephone line and they would be underrepresented in the

telephone survey. Hence, the web survey was conducted to reach the student sample.

Survey Design

Telephone Survey

A nationwide telephone survey can reach out to a reliable and representative sample

group easily and quickly, especially for migrant studies where the respondents are located

across the country. It also has the advantage of being able to generalize findings from a

representative sample to a population with high accuracy (Frey, Botan, Friedman, &

Kreps, 1992).

However, no complete list of Chinese migrants in Singapore is available to derive

the needed sample. Fortunately, the names of Mainland Chinese (in “Han Yu Pin Yin”)

could be easily identified as Singaporeans tend to spell their names in Chinese dialects.

Therefore, the local phone directory, published in year 2004, was used to establish a list

of candidates for the survey. Firstly, all the Mainland Chinese were identified from the

phone directory as potential respondents, and their telephone numbers were saved in the

computer to set up a database. A total of 7810 potential respondents were found in this

manner. Next, a random number was generated as the starting position of a cyclic search,

13

Page 14: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

D. Acknowledgement Sample

ACKNOWLEDGEMENTS

First and foremost, I would like to express my sincere appreciation to my supervisor, Dr.

Alfred Choi, for his invaluable guidance, support and encouragement during every stage

of this study.

I am also thankful to my parents for their concern and endless encouragement.

Every time I feel tired, I will get energized with the thought of their love and support.

The work presented in this report has been carried out at the School of

Communication and Information, Nanyang Technological University (NTU). The

financial support from NTU is gratefully acknowledged.

Finally, I extend my gratitude to my friends who have shared the laughter and

tears with me. They have made the past year a wonderful and enriching experience.

14

Page 15: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix E. Table of Contents Sample

TABLE OF CONTENTS

ABSTRACT ……………………………………………………………………... i

ACKNOWLEDGEMENTS ii

TABLE OF CONTENTS ………………………………………………………. iii

LIST OF TABLES ……………………………………………………………… iv

LIST OF FIGURES …………………………………………………………….. v

CHAPTER ONE INTRODUCTION ………………………………………… 1

CHAPTER TWO LITERATURE REVIEW

…………………………………

6

Social Support ………………………………………………………………..

International Migration ……………………………………………………….

Computer-Mediated Communication and Social Support ……………………

Research Questions and Hypotheses ………………………………………….

6

12

26

38

CHAPTER THREE METHODOLOGY …………………………………….. 44

Online Field Observation …………………………………………………….. 44

Survey ………………………………………………………………………… 51

In-Depth Interviews ………………………………………………………….. 67

CHAPTER FOUR NATURE OF CMSS AND INFLUENCING FACTORS 70

Nature of CMSS ……………………………………………………………… 70

Influential Factors of CMSS Seeking ………………………………………… 83

CHAPTER FIVE CMSS AND ADAPTATION …………………………….. 103

Adaptation of the Respondents ………………………………………………. 103

CMSS and Socio-Cultural Adaptation ……………………………………….. 104

CMSS and Psychological Adaptation ………………………………………... 116

CHAPTER SIX CONCLUSIONS AND DISCUSSIONS ….

………………...

121

Findings and Discussions …………………………………………………….. 121

Significance and Contributions…………………………...…………………... 135

Limitations and Suggestions for Future Studies ……………………………... 140

15

Page 16: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

APPENDICES …………………………………………………………………... 143

REFERENCES ………………………………………………………………….. 169

16

Page 17: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix F. List of Tables Sample

LIST OF TABLES

Table 3.1 Results of Kappa Coefficient………………………………………... 51

Table 3.2 Demographics of the Respondents………………………………….. 57

Table 3.3 Length of residence of the Respondents…………………………….. 59

Table 3.4 The Selected 20-item Socio-cultural Adaptation Scale………........... 61

Table 3.5 Psychological Adaptation Scale…………………………………….. 64

Table 3.6 Computer-Mediated Social Support (CMSS) Seeking Scale……….. 66

Table 4.1 Descriptions of Messages in Forum………………………………… 71

Table 4.2 Individual Types of CMSS-Related Messages……………………… 74

Table 4.3 Definition of Migration Periods…………………………………….. 84

Table 4.4 Overall CMSS Seeking Frequency, by period of migration…........... 85

Table 4.5 Individual Types of CMSS seeking and Length of Residence……… 86

Table 4.6 Individual Types of CMSS Seeking, by Period of Migration………. 87

Table 4.7 Overall CMSS Sought, by Offline Social Support Availability……. 90

Table 4.8 Satisfaction on Individual Types of CMSS, by CMSS Received…... 92

Table 4.9 CMSS Sought, by Satisfaction on CMSS……………………........... 93

Table 4.10 Regression Analysis of Overall CMSS Sought…………………….. 96

Table 4.11 Regression Analysis of Individual Types of CMSS Sought…........... 97

Table 4.12 Regression Analysis on Overall CMSS Sought…………………….. 98

Table 4.13 Interaction Effects of Influencing Factors………………………….. 99

Table 4.14 Regression Analysis on Individual Types of CMSS Sought……….. 101

Table 5.1 Socio-Cultural Adaptation, by CMSS Received among Users........... 105

Table 5.2 Regression Analysais on Socio-Cultural Adaptation……….............. 107

Table 5.3 Subscales of Socio-Cultural Adaptation, by CMSS Received……… 110

Table 5.4 Regression Analysais on Social Adaptation Subscale………........... 112

Table 5.5 Regression Analysais on Physical Adaptation Subscale……........... 114

Table 5.6 Regression Analysais on Cultural Adaptation Subscale……............. 115

Table 5.7 Psychological Adaptation, by CMSS Received…………………….. 116

Table 5.8 Regression Analysais on Psychological Adaptation…………........... 118

17

Page 18: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix G. List of Figures Sample

LIST OF FIGURES

Figure 2.1 A Conceptual Framework of CMSS among International Migrants... 40

Figure 4.1 Proportion of CMSS Seekers out of the Internet Users……………... 75

Figure 4.2 Frequency of CMSS Seeking (Migrant Sample) …………………… 75

Figure 4.3 Frequency of CMSS Seeking (Student Sample) ……………………. 76

Figure 4.4 Response Rate of the CMSS Sought (Migrant Sample) ……………. 80

Figure 4.5 Response Rate of the CMSS Sought (Student Sample) …………….. 80

Figure 4.6 Satisfaction on the CMSS Received (Migrant Sample)..……………. 81

Figure 4.7 Satisfaction on the CMSS Received (Student Sample)………........... 81

Figure 4.8 Change of Seeking Frequencies of Individual Types of CMSS…….. 88

Figure 4.9 Proportion of Individual Types of CMSS Sought by Migrants........... 88

Figure 5.1 Intercultural Adaptations of Migrants and Students………………… 104

Figure 6.1 CMSS Seeking among International Migrants and Its Effects on

Adaptation….……………………………………………………….. 130

18

Page 19: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix H. Abstract Sample

ABSTRACT

The present study examines the nature of Computer-Mediated Social Support (CMSS)

with regards to international migration and its impact on the migrants’ adaptation to the

host country. Grounded upon the theories and findings in related areas, a conceptual

framework is proposed that pulls together the main variables under investigation and

asserts that the CMSS helps improve migrants’ lives during the transition period.

To empirically test the model, two questionnaire surveys, namely, telephone

survey and web survey, were conducted among Chinese migrants and Chinese students in

Singapore, respectively. An online field observation and in-depth interviews were also

done to enrich the study by providing qualitative information not directly observed in the

surveys. The findings indicate that international migrants actively participate in CMSS,

and their CMSS seeking behavior can be predicted by the migration period, the

established face-to-face network, and the satisfaction on CMSS they have received. The

analyses also show that all types of CMSS are positively relevant to the adaptation

process.

19

Page 20: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix I. Appendix Sample (Questionnaire)

Computer-Mediated Social Support:

Internet Use and International Migrants

Good evening! I am ______ calling from the School of Communication and Information at Nanyang Technological University. We are conducting a telephone survey with people from Mainland China on how they are adjusting in Singapore as well as on Internet use.

Are you from Mainland China?[If yes, continue; if no, say: The survey only requires people from Mainland China. Sorry for taking up your time. Good Bye!]

Is your age above 18? [If yes, continue; if no, ask: Is there anyone else in the household who comes from China aged above 18, and ask him/her to respond; If no, say: The survey only requires people who is above 18 years old. Sorry for taking up your time. Good Bye!]

This survey will take about 15 minutes. We hope you can take part. [If answer is “NO”, PERSUADE; If no objection, say: “Thank you very much.”] [There are no right or wrong answers. Your honest opinion is very important to us. We assure you that the information you provide is confidential and will be used only for academic purposes. ]

Here comes the first question.

1) How long have you been staying in Singapore? ____ years ____months

2) When you first arrived in Singapore, how many relatives and close friends residing here did you have? [If no friend or relative here, put “0”.]a. Relatives including family members ________b. Close friends ________

3) Generally speaking, how often is each of the following types of support made available to you when you need them? Please use a 5-point scale to answer the questions where 1=None of the time, and 5=All of the time.

20

Page 21: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix J. References Sample

REFERENCES

Adelman, M. B., Parks, M. R., & Albrecht, T. L. (1987). Beyond close relationships: Support in weak ties. In T. L. Albrecht & M. B. Adelman (Eds.), Communicating social support (pp. 126-147). Newbury Park, CA: Sage.

Adelman, M. B. (1988). Cross cultural adjustment: A theoretical perspective on social support. Journal of Intercultural Relations, 12, 183-204.

Adler, P. S. (1975). The transitional experience: An alternative view of culture shock. Journal of Humanistic Psychology, 15, 13-23.

Ady, J. C. (1995). Toward a differential demand model of sojourner adjustment. In R. L. Wiseman (Ed.), Intercultural communication theory (pp. 92-114). Thousand Oaks, California: Sage.

Amarasingham, C. R. (1980). Making friends in a new culture: South Asian women in Boston, Massachusetts. In G. V. Coelho & P. Ahmed (Eds.), Uprooting and development (pp. 417- 444). New York: Plenum.

Anderson, L. (1994). A new look at an old construct: Cross-cultural adaptation. International Journal of Intercultural Relations, 18, 293-328.

Albrecht, T. L., & Adelman, M. B. (1984). Social support and life stress: New directions for communication research. Human Communication Research, 11(1), 3-32.

Albrecht, T. L., & Adelman, M. B. (1987). Communicating social support: A theoretical perspective. In T. L., Albrecht & M. B., Adelman (Eds.), Communicating social support. Newbury Park, CA: Sage.

Althaus, S. L., & Tewksbury, D. (2000). Patterns of Internet and traditional news media use in a networked community. Political Communication, 17 (1), 21-46.

Altman, I., & Taylor, D. A. (1973). Social penetration: The development of interpersonal relationships. New York: Holt, Rinehart, and Winston.

Aneshensel, C. S., & Stone, J. D. (1982). Stress and depression: A test of the buffering model of social support. Achieves of General Psychiatry, 39, 1392-1396.

Aroian, K. J. (1992). Sources of social support and conflict for Polish immigrants. Qualitative Health Research, 2(2), 178 - 207.

Atienza, A. A., Collins, R., & King, A. C. (2001). The mediating effects of situational control on social support and mood following a stressor: A prospective study of dementia caregivers in their natural environments. Journal of Gerontology, 56B, S129 S139.

Barnes, M. K., & Duck, S. (1994). Everyday communicative contexts for social support. In B. Burleson, T. Albrecht, & I. G. Sarason (Eds.), Communication of social support: Messages, interactions, relationships and community (pp. 175-194). Thousand Oaks, CA: Sage.

21

Page 22: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix K. Table Sample

Table 4.6

Frequency of CMSS Sought, by Period of Migration

Note. ** p < .01.

Appendix L. Figure Sample

Figure 4.8. Change of Individual Types of CMSS Seeking

31

4

20

13

28

2

149

27

0. 3

94

0

10

20

30

40

Info. Emotional Tangible Comp.

Freq

. of S

eeki

ng

Recent Settled Very Settled

Frequency of CMSS Sought

Period of Migration N Mean F

Recent 143 68.9

11.81**Settled 283 53.6

Very Settled 117 40.1

22

Page 23: FORMATTING GUIDE - Nanyang Technological Web viewThis guide sets forth the thesis ... Use word substitutes for formulas ... the School of Materials Engineering, the School of Civil

Appendix M. Footnote Sample

The 29-item SCAS was modified to cater to this study. Items not suitable for

Mainland Chinese in Singapore were removed. For example, “the difficulty in dealing

with people staring at you”. The modified question list consisted of following 20 items

(Table 3.4) and was shown effective by factor analysis. The response scale is “1 =

extreme difficulty, 2 = great difficulty, 3 = moderate difficulty, 4 = slight difficulty, and 5

= no difficulty” (see Appendix E1). The higher the score the migrants get, the less

difficulty they experience, and the more socio-culturally adaptive they are.

The measures for the socio-cultural adaptation levels were validated by

reliability test and factor analysis. The reliability of the 20-items is found to be excellent

(Cronbach α = .86 & .89 in the migrant sample and the student sample, respectively)

(Appendix E2 & E3).

Furthermore, factor analysis with principle components extraction and Varimax

rotation was conducted to provide a meaningful interpretation of the data. Essentially the

analysis identified a relatively small number of factors that were representative of the

relationships among the interrelated variables.

In this study, the general criteria used to establish the factors included: (1) the

Kaiser-Meyer-Olkin (KMO) 1 must be greater than .80; (2) the combined factors must

account for more than 45 percent of the variance; (3) the indices to be included must have

primary loadings greater than .45 and no secondary loadings can be greater than or equal

to .25. Note that, however, in order to force the numbers of items contributing to

individual factors to fall into a comparable range, the qualified items were tailored so that

the numbers were not too many or too few. Moreover, as the rotated Component Matrix

within the migrant sample and the student sample were not exactly the same, certain

compromises were made to balance the results.

1 The Kaiser-Meyer-Olkin (KMO) measure of sampling adequacy is an index for comparing the magnitudes of the observed correlation coefficients to the magnitudes of the partial correlation coefficients. Small values for the KMO measure indicate that a factor analysis of the variables may not be a good idea, since correlations between pairs of variables cannot be explained by the other variables. According to Kaiser (1974), the values of KMO measures in the 0.90s is marvelous, in the 0.80s is meritorious, in the 0.70s is middling, in the 0.60s is mediocre, in the 0.50s is miserable and below 0.50s is unacceptable.

23