Page 1 of 3

F R A M E L E S S L A R G E / S M A L L I N S E T M E D I C I N E C A B I N E T A S S E M B L Y I N S T R U C T I O N S

T O O L S A N D M A T E R I A L S R E Q U I R E D :

1. Screwdriver2. Carpenter’s level

P A R T S L I S T

A. Cabinet

B. Wood screws (x4)

BEFORE YOU BEGIN:

Do not open cabinet door more than 90 degrees when unit is laying flat on any surface. The weight of the cabinet door opened beyond

90 degrees in a flat position may cause damage around the hinge areas. Cabinet door may be fully opened only when the cabinet is in an

upright standing or installed position.

Page 2 of 3

A S S E M B L Y I N S T R U C T I O N S :

1. Measure a space for the cabinet body (A). Blocking is recommended to ensure adequate support. Inset (recessed) box measurements will vary according to cabinet model (See Below).

Install the cabinet with recessed box set back within the wall cavity. 2.

Large size dimensions

19 7/16” wide31 15/16” high3 11/16” deep

Small size dimensions 14 1/2” wide24 1/2” high3 11/16” deep

F R A M E L E S S L A R G E / S M A L L I N S E T M E D I C I N E C A B I N E T A S S E M B L Y I N S T R U C T I O N S

Mount Cabinet by fastening the enclosed wood screws (B) on the inner side panels. Enclosed screws to be used for installation into wood frames only. Appropriate screws/anchors need to be purchased for other materials.

3.

Cleaning and Maintenance Instructions:

To maintain and protect luster of all products, clean with soft, damp cloth only.

Page 3 of 3

F R A M E L E S S L A R G E / S M A L L I N S E T M E D I C I N E C A B I N E T A S S E M B L Y I N S T R U C T I O N S