CLEAVER-BROOKS is a complete boiler room solutions provider that helps businesses run better every day. It develops hot water and steam generation products aimed at integrating and optimizing the total boiler/ burner/ controls system to maximize energy effi ciency and reliability while minimizing emissions.

// CLEAVER-BROOKS PROFIRE Cleaver-Brooks has a full line of high-quality, high-effi ciency, low and ultra-low-emission burners to ensure that we have a burner for any application, industry, or need. We offer Commercial Burners with Maximum effi ciency in our ProFire®products in low or ultra-low-emissions, for all types of commercial applications. On the Industrial side we offer custom designed and built oil or gas burners or Duel Fuel for industrial watertube, fi retube or packaged boiler applications.

// CLEAVER-BROOKS HAWK CONTROL PACKAGES. The HAWK Line of Controls is a key tool to Increase effi ciency and decrease fuel costs and emissions with control systems designed to get the most out of your boiler room. All of the control lines have been designed and optimized to make your boiler room more effi cient and save you money.You can easily transfer data from boiler controls to external building automation, SCADA, or remote monitoring systems. We provide custom-designed control units to meet the needs of your specifi c boiler system. Monitor and manage all water-related touch points, including pumps and DA Tanks, and Feed Water Systems.

PRODUCTS:

THE FULTON COMPANIES researches, engineers, manufactures and sells complex heat transfer equipment for a wide range of commercial and industrial applications. To fulfi ll the growing need for systems integration and controls, Fulton established Synex Controls. The integration of cutting edge controls technology with consumer needs has allowed Synex to establish itself as an innovator in the emerging facility HVAC management controls market.

• Vertical Steam and Hot Water Boilers

• Vantage Duel-Fuel High Effi ciency Condensing Boiler that runs on Light oil as back-up fuel

• High Effi ciency Condensing Boilers from light commercial low mass units to high mass industrial Condensing units; full line of complete steam accessories that can be all put together on a skid to fi t any design need; sizes range from 300,000 BTU up to 6 million BTU’s

• Thermal Fluid Heaters completely packaged with all accessories on a skid from 300,000 BTU’s up to 6 Million BTU’s

• Copper Fin boilers up to 3.0 million BTU input

• Synex Controls to run your boiler plant to optimize effi ciency and reduce costs; the controls package is easily merged into your BMS System via the standard Modbus or whatever protocol is required by your facility

� e Frank I. Rounds Company has been e� ectively serving the needs of New England businesses for over 75 years. Our reputation for never leaving a job until the client is 100% satis� ed has won us the trust of professionals throughout our industry. We have the products and services to assist in all facets of your new or existing commercial / industrial mechanical room.

� e Frank I. Rounds Company o� ers creative solutions for high performance steam and hydronic systems, water treatment, exhaust venting and mechanical room ventilation, as well as boiler repowering needs such as burners and controls.

Please review the following line-up of our equipment manufacturer partners to help decide the best solution for your current project. You can rely on us for peak performance, reduced operating costs and green technology as well as professional consultants to help guide you through every step of the process.

Frank I. Rounds Company65 York Avenue

Randolph, MA 02368800-696-6440

frankirounds.com

• Industrial Watertube Boilers, Firetube Boilers, Flextube Boilers and High Effi ciency Condensing Boilers

• Boiler Feedwater Systems including Deaerators, Surge Tanks and standard Feedwater Tanks

• Energy Recovery Equipment including Economizers and Blow Down Heat Recovery Systems

• Hawk Control Upgrades including Parallel Positioning, O2 Trim and VFD’s on Blower Motors

• ProFire Burners for all types of boilers from light duty commercial up to IWT Applications

• Engineered stack systems to consolidate your PO and save time

• Sizes from 500,000 BTU Hydronic Units up to 500,000 PPH IWT Packaged Boiler Systems

PRODUCTS:

frankirounds.com

SELKIRK CORPORATION has been a leading manufacturer of chimney, venting and air distribution products for the commercial and industrial HVAC and hearth industries for more than 80 years.

PRODUCTS:Venting materials for a variety of applications: Industrial, Commercial Boilers, Emergency Generators, Resturaunts, specialized applications for Grease Duct, Zero Clearance Flues Positive Pressure, Atmospheric, Generator Exhaust Systems from 4 inches and up, in multiple materials of stainless steel, galvanized and insulated flues

FLO FAB was established in 1981. It has grown from a pump distributor into its own line of quality pumps and hydronic accessories. The service, repairs, sales, engineering, design, production, quality control, accounting and administration departments share the same location. This has allowed Flo Fab to retain competent and experienced staff of professionals with varied and specialized abilities that constantly work on improving our existing products and add new ones per our customer’s needs. Flo Fab has grown over the years and now includes pumps & pump packages, tanks, heat exchangers & hydronic accessories.

PRODUCTS:• Hydronic Pumps, from inline circulators to

base mounted end suction units• Hydronic Pump Systems, for boiler and

HVAC Systems and specialty applications• Hydronic Accessories that include ASME

Expansion Tanks, Triple Duty Valves, Air Separators, and Heat Exchangers

• Skid and containerized mechanical rooms

CHEMTEX Since 1978, International Chemtex has been helping customers treat their process, heating, cooling and wastewater systems. With an emphasis on safety, we focus on controlling utility costs and extending equipment life. We accomplish this with industry leading technology and continual improvement in manufacturing and service. Our people are highly trained to help find the most cost-effective solution for your facility.

PRIMARY APPLICATIONS:• Cooling Water Treatment• Boiler Water Treatment• Closed Loop Treatment• Reverse Osmosis Treatment• Wastewater Treatment• Ancillary Products• Expert Analysis & Consulting Abilities

US DRAFT CO. delivers pioneering technology for the chimney and venting industry by bringing the solutions necessary for safe, code-compliant design while simultaneously supplying low maintenance, dependable products. At US Draft Co., we understand the complex issues presented in modern day appliance venting and we are ready to assist you in your venting needs.

PRODUCTS:• Mechanical draft inducers – inline (90 &

180 degree arrangements) and termination designs

• Supply air fan systems• Clothes dryer systems• Variable volume automatic flue dampers• Advanced controllers for modulating or on/

off operation

ENERVEX INC. is a global leader in the design and supply of demand-controlled mechanical draft and exhaust systems with a focus on innovation, design and environmental sustainability. ENERVEX markets an extensive portfolio of residential and commercial demand-controlled exhaust systems. The company’s global business is 70% commercial – offices, healthcare, education, sports facilities, multi-family and mixed-use buildings, hotels and resorts - and 30% residential.

PRODUCTS:• Mechanical draft fans/power venters,

building exhaust fans and ventilators• Air supply fans and ventilators

CAMUS HYDRONICS LTD. is a manufacturer of an extensive line of gas fired high efficiency copper tube and stainless steel boilers for residential, light commercial, commercial and industrial applications.

PRODUCTS:• Fully Condensing Hot Water Boilers:

80,000 — 6 Million BTU’s in both stainless steel and copper fin; high and low mass units with built in Honeywell Sola Control for lead lag functionality and cascading up to 8 units; 250,000 — 6 Million BTU Non-Condensing Copper Fin Units

• Various configurations of atmospheric, horizontal and modular boilers to fit your unique space requirements

• Fully Condensing Hot Water Heaters 50,000 up to 6 Million BTU’s

• Non-Condensing Hot Water Heaters 50,000 up to 6 Million BTU’s

THE ALSTROM CORPORATION has provided leadership and innovation in Heat Transfer Equipment Design and Manufacturing since 1939. Our comprehensive product line includes Patented Technologies designed for maximum performance efficiency. Based in the Bronx NYC and shipping all over the world.

PRODUCTS:• Water to Water or Steam to Water

Heat Exchanger• Heat Exchangers for Special Applications• Fuel Oil Preheaters• Heat Recovery Heat Exchangers• Packaged Heat Transfer Systems• Liquid-Vapor Separators• Boiler Room Accessories• Clean Steam Generators

SHIPCO® PUMPS is a privately held company engaged in the design, development, production, and distribution of a wide range of engineered products. Products are targeted for applications in the steam recovery operations of a boiler steam system. These steam-related products are primarily used, but not limited to public institutions such as hospitals, schools, colleges, universities, prisons, state buildings or military bases; as well as commercial and industrial industries such as automobile, airline, brewery, pharmaceutical, baking or shipping.

PRODUCTS:• Boiler Feed Systems, Simplex, Duplex,

Triplex or whatever is required• Boiler Feed Pumps and Surge Tanks• Vacuum Pump Systems• Deaerators• Pump and Motor Assemblies• Custom Specialty Systems to meet your

job specific requirements

FOR MORE INFO: FRANKIROUNDS.COM I FOLLOW US ON TWITTER: @FRANKIROUNDS