Upload
vuongtu
View
232
Download
6
Embed Size (px)
Citation preview
FREQUENTLY USED PAINTS
HEMPEL’S MULTI-TINT® SySTEM
HEMPEL’S MULTI-TINT® System is a volumetric tinting system developed by Hempel in 1993 as a tool for meeting customers’ demands for special colours from international colour standards, such as RAL, British Standard 381C and BS-4800, NCS, Munsell plus other international and customer colours.
HEMPEL’S MULTI-TINT® Solvent-borne System includes a set of 14 tinting pastes, enabling Hempel to make lead and lead-free colours and comprises of some 3,500 different colour recipes from international colour standards.
HEMPEL’S MULTI-TINT® Waterborne System includes a set of 12 tinting pastes, all of them lead-free and comprises of some 950 different colour recipes from international colour standards.
For further information please contact your local Hempel office.
ProTEcTINg yoUr INvESTMENTS
Hempel was founded in Denmark in 1915 by J. C. Hempel, who introduced the concept of ready-made marine paints. Over the years we have expanded our original product portfolio and services into many other coatings and markets. The company has grown to become the largest independent supplier of coatings for the protective, marine, container, yacht and decorative market segments.
Drawing on decades of experience from the marine market segment, Hempel’s range of protective coatings has been developed to provide our customers with a total system for the protection of steel and concrete structures such as bridges, civil constructions, airports, cranes, downstream and upstream facilities, pipelines, chemical and power plants, onshore and offshore wind farms, railway carriages, mining plants and many other facilities.
Hempel produces a wide range of solvent-borne, solvent-free and waterborne coatings, intumescent coatings for passive fire protection as well as specialised paints for specific conditions. Our coatings deliver proven, long-term effectiveness, protecting components in even the most challenging environments. To find out more visit us at www.hempel.co.uk.
Numerous testing and research institutions have given their approval to Hempel’s paints. The products are certified for various operating conditions and meet today’s regulatory requirements.
A GUIDE TO HEMPEL’S FrEQUENTLy USED PAINTSThis overview presents paints designated for anticorrosion protection, produced at Hempel’s state of the art manufacturing sites, these products are widely available. Other paints for a wide variety of purposes, unique to local assortments and custom coatings are not included here. To obtain detailed information, specifications and pricing for a particular project, please contact your local sales representative or local Hempel office.
Legend:
Micaceous iron oxide air spray Brushairless sprayWaterBorne Multi-tint spatula
• Fast-drying • Contains zinc phosphate
Rust-preventing primer for steel and machinery parts. Workshop primer for temporary protection.
12170 / grey matt 47 471 g/lapprox. 1 hour
5.9 m2/l 80 µm
40 - 80 µmHeMPAQUICK PRIMeR13624
• Contains zinc phosphate • Complies with EU Directive
2004/42/EC
High performance one component primer for HEMPALIN systems.
40760 / green matt 49 407 g/l 2 - 4 hours12.3 m2/l
40 µm30 - 50 µm
HeMPALIn PRIMeR12050
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAngePROdUCT FeATUReSALKYdS
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAngePROdUCT FeATUReSACRYLICS
• Weather resistant• Flexible• Resistant to salt water, mineral oil spillage
and aliphatic hydrocarbons• Complies with EU Directive 2004/42/EC
One component, high performancetopcoat for engine rooms, tank tops,main engines and auxiliary machinery. 10000 / white
glossy 46 430 g/l 6 - 8 hours15.3 m2/l
30 µm30 - 40 µm
HeMPALIn enAMeL52140
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
3
• Fast-drying• Good anticorrosive properties• Complies with EU Directive
2004/42/EC
Primer in waterborne systems, for interior and exterior steelwork, hot dip galvanised steel, aluminium, and stainless steel.
12170 / grey matt 43 41 g/l 1.5 hours5.7 m2/l 75 µm
50 - 100 µmHeMUCRYL PRIMeRHI-BUILd 18032
• Physically drying• Good colour retention• Resistant to splashes of salt water, water, ali-
phatic hydrocarbons, animal and vegetable oils• Contains zinc phosphate
Primer, intermediate coat or topcoat for HEMPATEX systems.Selfprimed repair and touch-up coating or topcoat for containers.
11480 / grey matt 42 511 g/lapprox. 4 hours
4.2 m2/l 100 µm
75 - 125 µm
HeMPATeX HI-BUILd46410
* the values variance is ± 1%
• Fast-drying• Good gloss and colour retention
Glossy topcoat over suitably primed steel substrates.
10000 / whiteglossy 40 498 g/l 1 hour
10 m2/l 40 µm
indicated dft: 40 µm
HeMPAQUICK enAMeL53840
• Contains aluminium • Good light reflection
Topcoat for exterior and interior steel, woodwork and moderately hot surfaces.
19000aluminium
glossy 38 506 g/lapprox.5 hours
15.2 m2/l25 µm
indicated dft:25 µm
HeMPeL’S SILVIUM51570
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAngePROdUCT FeATUReSePOXIeS
• Contains non-chlorinated plasticiser• Good gloss and colour retention• Physically drying• Resistant to salt water, splashes of aliphatic
hydrocarbons and animal and vegetable oils
Topcoat for interiors and exteriors on HEMPATEX systems.
19990 / blacksemi-gloss 31 606 g/l 3 - 4 hours
8.9 m2/l 35 µm
indicated dft:35 µm
HeMPATeX enAMeL56360
• Excellent adhesion properties• Abrasion and impact resistant• Contains zinc phosphate• Application temperature from -10°C• Complies with EU Directive 2004/42/EC
Primer for HEMPATEX, HEMPADUR and HEMPATHANE systems, on hot dipped galvanised surfaces, aluminium and stainless steel. Applicable when roughening of the surface is not possible.
11630 / off-white matt 55 389 g/lapprox.3 hours
11 m2/l 50 µm
50 - 80 µm
HeMPAdUR 15553
• Contains zinc phosphate• Quick drying, fast handling
Shopprimer for the protection of blast-cleaned steel plate and other structural steel during the storage and building period.
50890 / red matt 22 659 g/l5 - 10
minutes10.5 m2/l
20 µm20 - 25 µm
HeMPeL‘SSHOPPRIMeR e 15280
4
• Fast-drying• Contains zinc phosphate• Complies with EU Directive
2004/42/EC
Primer or intermediate coat for HEMPADUR systems and on-site work.
12170 / grey
12430 / MIOreddish grey
matt 62 351 g/l 1 - 1.5 hours6.2 m2/l100 µm
75 - 150 µmHeMPAdUR FAST dRY15560
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAngeACRYLICS
PROdUCT FeATUReS
* the values variance is ± 1%
• Weather resistant• High gloss retention• Fast-drying• Complies with IMO resolution
MSC 61 (67) standard• Complies with EU Directive 2004/42/EC
Topcoat for interiors and exteriors in waterborne systems in up to C4 corrosive environments.
10000 / whiteglossy 44 5 g/l 1.5 hours
5.9 m2/l 75 µm
50 - 100 µm
HeMUCRYL enAMeLHI-BUILd 58030
• Polyamide-adduct cured• Good adherence• Abrasion and impact resistant• Contains zinc phosphate• Application temperature from -10°C
Primer for HEMPATEX, HEMPADUR and HEMPATHANE systems on steel and for hot dipped galvanised surfaces, aluminium and stainless steel.
22430 / cream matt 40 531 g/lapprox.3 hours
10 m2/l 40 µm
30 - 50 µm
HeMPAdUR 1555e
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
• Isocyanate-free• Good gloss and colour retention• Resistant to water and aliphatic
hydrocarbons spillage
Topcoat for the protection of structural steel.
10000 / whiteglossy 60 394 g/l
approx.8 hours
12 m2/l 50 µm
indicated dft:50 µm
HeMPeL‘S PROACRYLIC 55880
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAnge
• Zinc rich content• Corrosion resistance• Application temperature from -10°C• Complies with SSPC-Paint 20, type 2,
level 3 and EU Directive 2004/42/EC
• Zinc rich content• Fast-drying• Cathodic protection of local mechanical
damage• Hardwearing and highly weather resistant • Application temperature from -10°C• Complies with SSPC-Paint 20, type 2, level 2,
ISO 12944-5 and EU Directive 2004/42/EC
Primer for steel. Zinc-shopprimed steel, where damaged spots, welds etc. have been power tool cleaned. On-line application for containers.
VOC-compliant versatile, long-term primer on steel for epoxy, vinyl and acrylic systems.
19830reddish grey
19830reddish grey
semi-matt
matt
66
65
324 g/l
332 g/l
3 hours
1 hour
13.2 m2/l50 µm
13 m2/l 50 µm
50 - 75 µm
50 - 75 µm
ePOXIeS
HeMPAdUR ZInC17340
HeMPAdUR ZInC17360
• Zinc rich content• Cathodic protection of local
mechanical damage• Fast-drying• Application temperature from -10°C• Complies with NORSOK M-501,
rev. 5, system no. 1
• Fast-drying• Contains zinc phosphate• Application temperature from -10°C
• Rust-inhibiting• Contains zinc phosphate• Complies with EU Directive
2004/42/EC
High solids, versatile, long-term primer on steel for epoxy systems, in up to C5 corrosive environments.Suitable for use as part of a NORSOK M-501 system 1 approved paint system.
Primer, intermediate coat or topcoat in epoxy systems in up to C5 corrosive environments.Topcoat: only where yellowing and chalking are acceptable.
A two component, waterborne primer.
10830 / grey
11480 / grey
12170 / grey
matt
semi-gloss
semi-gloss
60
74
51
340 g/l
238 g/l
22 g/l
1 hour
approx.1.5 hours
approx.4 hours
12 m2/l 50 µm
7.4 m2/l 100 µm
6.8 m2/l 75 µm
50 - 75 µm
80 - 125 µm
50 - 100 µm
HeMPAdUR PRO ZInC17380
HeMPAdUR FAST dRY17410
HeMUdUR 18500
5
PROdUCT FeATUReS
* the values variance is ± 1%
• Polyamide-adduct cured• Highly corrosion resistant• Application temperature from -10°C• Complies with EU Directive 2004/42/EC• Shade 21780 contains zinc phosphate
Maintenance and repair primer, intermediate coat and topcoat in HEMPADUR systems.Suitable as a (blast) primer in epoxy systems and mist coating on GALVOSIL.
12430 / MIO reddish grey
matt 54 414 g/lapprox.
3 - 4 hours5.4 m2/l100 µm
50 - 125 µm
HeMPAdUR 15570
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
• Low water permeability• Abrasion and impact resistant• Resistant to seawater, mineral oils, aliphatic
hydrocarbons, petrol splashes and related products
• Complies with EU Directive 2004/42/EC and BS 476: Part 7: 1997 standard
Self-priming system, intermediate coat, topcoat, ballast tank or repair and maintenance work coating.
50630 / red semi-gloss 60 371 g/lapprox.7 hours
4 m2/l150 µm
125 - 175 µm
HeMPAdUR 45141
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAngeePOXIeS
• Good wetting properties• Low water permeability• Abrasion and impact resistant• Resistant to seawater, mineral oils, aliphatic
hydrocarbons, petrol splashes and related products
• Harmless to grain cargoes• Application temperature from -10°C• Complies with EU Directive 2004/42/EC
and BS 476: Part 7: 1997 standard
• Fast-drying• Contains zinc phosphate• Complies with EU Directive
2004/42/EC
• Abrasion and corrosion resistant• Low VOC• Corrosive category C5• Complies with NORSOK M-501,
system no. 7. and EU Directive 2004/42/EC
Self-priming system, intermediate coat, topcoat, ballast tank or repair and maintenance work coating.
Topcoat in up to C4 corrosive environments, or a one coat direct-to-metal system.
Self-priming topcoat and heavy duty system for ramps, decks and ship hulls.
50630 / red
12170 / grey
12340 / grey
semi-matt
semi-matt
semi-gloss
60
65
79
371 g/l
331 g/l
254 g/l
approx.11 hours
5°C
2 hours
7 - 8 hours
4 m2/l150 µm
8.1 m2/l 80 µm
4 m2/l200 µm
125 - 175 µm
80 - 125 µm
150 - 250 µm
HeMPAdUR 45143
HeMPAdUR FAST dRY45410
HeMPAdURMULTI-STRengTH45751
6
PROdUCT FeATUReS
* the values variance is ± 1% ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. *** Aluminium pigmented shade 19870 / dark alu and 19000 / light alu
• Good wetting properties• Prolonged recoating intervals• Low VOC• Application temperature from -5°C
Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, immersion service, maintenance and minor repairs. **
12170 / grey
12430 / MIOreddish grey
***
semi-gloss 80 217 g/lapprox.4 hours
6.4 m2/l125 µm
125 - 200 µm
HeMPAdUR MASTIC45880
• Reinforced with glass flakes• Impact and abrasion resistant• Resistant to seawater, mineral oils, aliphatic
hydrocarbons and petrol splashes• Resistance to early immersion in water• Low VOC
Self-priming system, interior lining for crude oil and fuel oil storage tanks.
19990 / black glossy 87 188 g/lapprox.6 hours
2.5 m2/l 350 µm
350 - 500 µm
HeMPAdURMULTI-STRengTH gF35870
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAnge
• Good wetting properties• Prolonged recoating intervals• Low VOC
• Good wetting properties• Short recoating interval• Low VOC• Application temperature from -10°C
• Polyamide-amine cured• Abrasion and corrosion resistant• Over-coatable with a wide range of epoxy
and polyurethane coatings• Application and curing temperatures
from -10°C• Low VOC
Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, immersion service, maintenance and minor repairs. Warm climate version of 45880. **
Self-priming intermediate coat in heavy duty systems in atmospheric exposure.
Universal self-priming and high performance primer for general use.
12170 / grey
12430 / MIOreddish grey
***
12170 / grey
12430 / MIOreddish grey
***
20450 / cream
semi-gloss
semi-gloss
semi-gloss
80
80
76
220 g/l
198 g/l
246 g/l
3 hours30°C
12 hours5°C
4 hours
6.4 m2/l 125 µm
4 m2/l 200 µm
5.1 m2/l150 µm
125 - 200 µm
125 - 200 µm
100 - 200 µm
ePOXIeS
HeMPAdUR MASTIC45881
HeMPAdUR MASTIC4588W
HeMPAdUR UnIQ4774A
7
* the values variance is ± 1% ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping. *** Aluminium pigmented shade 19870 / dark alu and 19000 / light alu
• Polyamide-adduct cured• Contains zinc phosphate• Low VOC• Fast-drying
Primer in epoxy systems in atmospheric exposure.
12170 / grey semi-gloss 76 250 g/lapprox.2 hours
6.1 m2/l 125 µm
100 - 150 µmHeMPAdUR ZP 47940
PROdUCT FeATUReS
• Polyamide-adduct cured• Low VOC• Fast-drying• High load of MIO pigment
Intermediate coat or topcoat in epoxy systems in atmospheric exposure.
12130 / MIOgrey
semi-gloss 76 251 g/lapprox.2 hours
6.1 m2/l125 µm
100 - 150 µmHeMPAdUR MIO47950
• Polyamide-adduct cured• Fast-drying• Complies with EU Directive 2004/42/EC
Primer, intermediate coat or topcoat in epoxy systems in up to C5 corrosive environments. **
20450 /creamRAL 9001
semi-gloss 70 298 g/lapprox.2 hours
5.6 m2/l125 µm
80 - 150 µmHeMPAdUR 47140
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
8
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
% *
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAnge
• Polyamide-adduct cured• Low VOC• Contains zinc phosphate • Fast-drying• Prolonged recoating intervals
• High chemical resistance• Amine-adduct cured• Phenolic content• Very good adhesion• High temperature and water resistant• Complies with ARAMCO’s specification APCS
2A, 2B and 2C
• Polyamide-adduct cured• Good wetting properties• Prolonged recoating intervals• Application temperature from -5°C• Low VOC
Primer, intermediate coat or topcoat in epoxy systems or a one coat self-priming system in up to C4 corrosive environments. **
A lining for potable water tanks, chemical tanks, pipe lines and under insulation.
Self-priming, multipurpose, surface tolerant, intermediate coat or topcoat in heavy duty systems, and for ballast tanks, underwater hulls and new steel. **
11480 / grey
11150light grey
17050 / grey
semi-gloss
matt
semi-gloss
75
68
77
245 g/l
316 g/l
220 g/l
approx.2 hours
4 - 6 hours
approx.4 hours
6 m2/l125 µm
6.8 m2/l100 µm
3.9 m2/l200 µm
80 - 125 µm
indicated dft:75 - 125 µm
125 - 200 µm
ePOXIeS
HeMPAdUR 47960
HeMPAdUR 85671
HeMPAdUR MASTIC8588e
ReCOMMended USe SHAde FInISH VOLUMeSOLIdS
%
VOC dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
dFT RAnge
• Solvent-borne• Passive fire protection• Complies with EN13381-8, BS476-21,
ETA 12/0581 according to ETAG018 Part 2 and Certifire certificate n° CF 5146
• Fast-drying• Solvent-borne• Passive fire protection• Complies with EN13381-8, BS476-21,
ETA 12/0581 according to ETAG018 Part 2 and Certifire certificate n° CF 5146
Intumescent fire protection for internal and external structural steel.Suitable for open beams, columns and hollow sections.Repair and touch-up system.
Intumescent fire protection for internal and external structural steel.Suitable for open beams, columns and hollow sections.Repair and touch-up system.
10000 / white
10000 / white
flat
flat
75 ±3
75 ±3
346 g/l
344 g/l
35 minutes
20 minutes
1 m2/l 750 µm
1 m2/l750 µm
depends on the
required fire resistance
depends on the
required fire resistance
InTUMeSCenTS
HeMPACORe One 43600
HeMPACORe One Fd 43601
PROdUCT FeATUReS
PROdUCT FeATUReS
* the values variance is ± 1% ** Directly applicable on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping.
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
ReCOMMended USe
ReCOMMended USe
SHAde
SHAde
FInISH
FInISH
VOLUMeSOLIdS
% *
VOLUMeSOLIdS
% *
VOC
VOC
dRY TO TOUCH
20°C
dRY TO TOUCH
20°C
THeOReTICAL SPReAdIng
RATe
THeOReTICAL SPReAdIng
RATe
dFT RAnge
dFT RAnge
• Contains zinc• Excellent chemical resistance
within the pH range 6-9• Highly weather and abrasion resistant• Cathodic protection of local mechanical damage• Complies with ASTM A-490 Class “B” standard,
SSPC-Paint 20, type 1, level 1 and ISO 12944-5
• Included in the CARGO PROTECTION GUIDE **
• Quick drying - fast handling time• Contains zinc• Complies with IMO MSC.215(82) standard
Self-curing, heavy-duty, rust-preventing primer, tank lining or complete single system for long-term protection of steel in up to C5 corrosive environments.
Shopprimer for short to medium-term protection of abrasive blast-cleaned steel plates and other structural steel during storage, fabrication, and construction periods. Welding (MIG/MAG) and gas-cutting suitable.
19840metal grey
19890reddish grey
matt
matt
64
28
434 g/l
652 g/l
approx.30 minutes
60-75% RH
4 - 5 minutes
12.8 m2/l50 µm
18.7 m2/l 15 µm
50 - 80 µm
10 - 25 µm
ZInC SILICATeS
POLYUReTHAneS
HeMPeL’S gALVOSIL15700
HeMPeL’SSHOPPRIMeRZS 15890
9
• Aliphatic-isocyanate cured• Very good gloss and colour retention• Low VOC• Application temperature from -10°C• Complies with Network Rail Specification
NR/L3/CN7item number 7.3.1.
Topcoat for the protection of structural steel in up to C4 corrosive environments.
45180 / bluehigh-gloss 64 359 g/l
approx.5 hours
16.3 m2/l40 µm
40 - 50 µm
HeMPATHAne HS 55810
PROdUCT FeATUReS
PROdUCT FeATUReS
* the values variance is ± 1% ** Resistant to permanent (non-cyclic) dry temperatures or occasionally dry peak temperatures of up to 500°C. Resistant to cyclic dry temperatures up to 400°C.
• Contains zinc phosphate• Aliphatic-isocyanate cured• Good gloss and colour retention• Application temperature from -10°C• VOC-compliant
Topcoat for the protection of structural steel or a one coat direct-to-metal system in corrosive environments.
11150 / grey semi-gloss 57 380 g/lapprox.5 hours
5.7 m2/l 100 µm
75 - 125 µm
HeMPATHAne HS 55613
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
Note: The data, specifications and recommendations provided in this overview of Hempel’s frequently used protective paints are obtained from individual product data sheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively the responsibility of the user to obtain accurate, complete and appropriate information in relation to any particular intended use of these and other Hempel products. Unless expressly agreed otherwise in writing, the products are supplied and all technical assistance is provided subject to Hempel’s general terms and conditions of sale, delivery and service. Except as expressed in said general terms and conditions, the manufacturer and seller waive all claims involving any liability, including but not limited to negligence, for all results, injury, or direct or indirect losses or damages arising from the use of the products as recommended above or otherwise.Product data are subject to change without notice and in any case should no longer be regarded as authoritative three years from the date of this information’s issue. For up-to-date Product Data Sheets please visit our website: www.hempel.co.uk.
HEMPAQUICK, HEMPATEX qualitiesHEMPATHANE topcoats and enamelsHEMPEL’S ANTIFOULINGS - GLOBIC, DYNAMIC, OCEANIC and OLYMPIC systems
HEMPALIN qualities and other alkyd-based products(except HEMPAQUICK qualities)
HEMPADUR qualities
HEMPEL’S SHOPPRIMER E 15280HEMPEL’S SHOPPRIMER ZS 15890 HEMPEL’S SHOPPRIMER ZS 15820
HEMPEL’S GALVOSIL qualitiesHEMPADUR qualities as “non-popping” sealers
870 g/l
801 g/l
857 g/l
833 g/l
894 g/l
THInneRS
HeMPeL’S THInneR 08080
HeMPeL’S THInneR 08230
HeMPeL’S THInneR 08450
HeMPeL’S THInneR08570
HeMPeL’S THInneR 08700
HEMPATHANE topcoats and enamels 881 g/lHeMPeL’S THInneR 08880
VOCReCOMMended USeYOUR nOTeS
10
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
Note: Colours shown in the list are approximate only due to, among other things, printing technology. We do not accept any responsibility for variation.
rAL 1000 22500rAL 1001 24900rAL 1002 20470rAL 1003 27030rAL 1004 27040rAL 1005 27050rAL 1006 20820rAL 1007 27070rAL 1011 27110rAL 1012 23120rAL 1013 17130rAL 1014 20420rAL 1015 27150rAL 1016 27160rAL 1017 27170rAL 1018 27180rAL 1019 27190rAL 1020 27200rAL 1021 20250rAL 1023 27230rAL 1024 27240rAL 1026 27260rAL 1027 27270rAL 1028 27280rAL 1032 27320rAL 1033 27330rAL 1034 27340rAL 1035 19350rAL 1037 27370rAL 2000 22120rAL 2001 50060rAL 2002 57020rAL 2003 57030rAL 2004 50190
rAL 2005 50180rAL 2007 57070rAL 2008 57080rAL 2009 57090rAL 2010 57100rAL 2011 57110rAL 2012 57120rAL 2013 59130rAL 3000 50170rAL 3001 57150rAL 3002 50740rAL 3003 51710rAL 3004 50100rAL 3005 51800rAL 3007 57370rAL 3009 53090rAL 3011 57310rAL 3012 57320rAL 3013 57330rAL 3014 57340rAL 3015 57350rAL 3016 57460rAL 3017 57470rAL 3018 57480rAL 3020 57200rAL 3022 57520rAL 3024 57540rAL 3026 50090rAL 3027 57570rAL 3031 57410rAL 4001 37010rAL 4002 57620rAL 4003 57630rAL 4004 57640
rAL 4005 37050rAL 4006 57660rAL 4007 57670rAL 4008 57680rAL 4009 57690rAL 4010 57700rAL 4012 38120rAL 5000 37000rAL 5001 37020rAL 5002 30170rAL 5003 37030rAL 5004 37040rAL 5005 37150rAL 5007 30570rAL 5008 32080rAL 5009 32090rAL 5010 30180rAL 5011 37110rAL 5012 35120rAL 5013 33930rAL 5014 37140rAL 5015 37240rAL 5017 37170rAL 5018 45180rAL 5019 30350rAL 5020 45200rAL 5021 40210rAL 5022 37220rAL 5023 37230rAL 5024 37440rAL 6000 46000rAL 6001 40050rAL 6002 47020rAL 6003 47030
rAL 6004 41490rAL 6005 47050rAL 6006 47060rAL 6007 47070rAL 6008 47080rAL 6009 47090rAL 6010 40220rAL 6011 40840rAL 6012 47120rAL 6013 41130rAL 6014 47140rAL 6015 47150rAL 6016 47160rAL 6017 42600rAL 6018 42170rAL 6019 49500rAL 6020 47200rAL 6021 47210rAL 6022 47220rAL 6024 47240rAL 6025 47250rAL 6026 47260rAL 6027 47270rAL 6028 47280rAL 6029 47290rAL 6032 47320rAL 6033 47330rAL 6034 47340rAL 7000 10390rAL 7001 10400rAL 7002 17020rAL 7003 17030rAL 7004 17160rAL 7005 17040
rAL 7006 17060rAL 7008 17080rAL 7009 17100rAL 7010 17110rAL 7011 17120rAL 7012 10270rAL 7013 17530rAL 7015 10380rAL 7016 10520rAL 7021 17210rAL 7022 17220rAL 7023 13230rAL 7024 17240rAL 7026 17260rAL 7030 17300rAL 7031 17310rAL 7032 11320rAL 7033 17330rAL 7034 17340
rAL 7036 11730rAL 7037 11370 rAL 7038 17380rAL 7039 17390rAL 7040 17700rAL 7042 17720rAL 7043 17730rAL 7044 17740rAL 7045 17750rAL 7046 17860
rAL 7048 17480rAL 8000 67000rAL 8001 67010
rAL 8002 67020rAL 8003 67030rAL 8004 61810rAL 8007 67070rAL 8008 67080rAL 8011 67110rAL 8012 67120rAL 8014 67140rAL 8015 67150rAL 8016 60160rAL 8017 67170rAL 8019 60180rAL 8022 67220rAL 8023 67230rAL 8024 67240rAL 8025 67250rAL 8028 67280
rAL 9004 17940rAL 9005 19990rAL 9006 19000rAL 9007 19870
rAL 9011 17910
rAL 9017 17970rAL 9018 17980rAL 9022 19360rAL 9023 19230
RAL / hempel colours
11
ALKYDS/ACRYLICS THINNERS RAL / HEMpEL COLOURSACRYLICS/EpOXIES EpOXIES EpOXIES/INTUMESCENTS ZINC-SI/pOLYURETHANES
HEMPEL (UK) LTD.Berwyn HouseThe PavilionsLlantarnam ParkCwmbranSouth WalesNP44 3FDUnited Kingdom
Tel.: +44 (01633) 874024Fax: +44 (01633) 489089E-mail: [email protected]
K 1
/201
4 U
K