Upload
others
View
36
Download
1
Embed Size (px)
Citation preview
Functional Safety Engineering
Services Ltd (FSES) is a
services based company
built on extensive experience
and expertise in functional
safety, across a wide range
of industries and applications
around the world.
FSES was established in response
to the need for industries to conform
to the international standard IEC
61508 for Electrical/Electronic and
Programmable Electronic Safety
Related Systems and its derivatives
IEC 61511, IEC 61513, IEC 61505.
SERVICES
Process Hazard AssessmentThe FSES certified independent expert facilitators will perform the necessary preparation activities then chair and deliver the appropriate reporting for the qualitative PHA activities including HAZID,
HAZAN, HAZOP, CHAZOP and FMEA.
Safety Requirements Specifications
FSES compile conceptual and detailed Safety Requirements Specifications to meet
the requirements of IEC 61511.
SIL VerificationWe also verify the capability of Safety Instrumented Functions
in accordance with IEC 61508 and IEC 61511 by quantifying the effects of random hardware failures such as PFD or Frequency of Dangerous Failures (PFH), calculating the
hardware safety integrity architectural constraints including Safe Failure Fraction (SFF), Hardware Fault Tolerance (HFT) and Common Cause Failure (CCF). Once quantified FSES
will verify the target SIL by using various modelling techniques including Reliability Block Diagram (RBD), FTA and Failure Mode
and Effect Analysis (FMEA).
Operations and Maintenance
We conduct review studies and provide consultancy services to ensure the functional
safety requirements are maintained during operations and maintenance, including proof testing, management of overrides, recording
failures and demands as well as change management. In addition, our expert team of consultants provide Reliability, Availability and
Maintenance studies (RAMs).
Functional Safety Assessments
Independent functional safety assessments are conducted by FSES to advise if functional safety and
safety integrity have been achieved by the Safety Instrumented System in accordance with IEC 61508.
Safety Integrity Level (SIL) Determination
We provide SIL determination studies, where the tolerable risk criteria is set and the necessary risk reduction is assigned. Then
safety integrity requirements for the SIFs can be allocated in terms of the Probability of Failure on Demand (PFD). FSES utilise
different methods to achieve SIL targets qualitatively by Risk Graphs, semi-quantitatively by Layers of Protection Analysis
(LOPA) or fully quantitatively by Fault Tree Analysis (FTA).
Safety Instrumented System (SIS)
Conceptual DesignSelecting the correct equipment and
architecture are key to achieving functional safety and reliability targets. FSES carry
out independent SIS conceptual designs, selecting the right equipment based on
integrity and functional requirements.
Functional Safety Lifecycle/ManagementThis relates to how functional safety requirements and procedures are
implemented during a project. FSES provide assistance or create and maintain in its
entirety the Functional Safety Lifecycle and Management requirements for clients in
accordance with IEC 61511.
Quantitative Risk Assessment
FSES have delivered numerous QRA projects using the FSES QRA Life Cycle
methodology which have contained many different activities such as:
• Process Hazard Assessment
• Quantitative estimation of Hazardous Event Frequencies
• Hazard Severity Assessment and Consequence Analysis
• Location Specific Risk
• Individual Risk Per Annum (IRPA) Calculation
• Potential Loss of Life (PLL) Calculations
• Frequency and Fatality plot
(FN Plots), Cumulative FN Plots
• Risk Reduction Measure Verification
• Demonstration of Tolerable Levels of Risk
and principles of As Low As Reasonably
Practicable (ALARP)
• Sensitivity Analysis
• Financial Impact Study
ScopeClarification
Terms of Reference
Cost BenefitAnalysis
FieldOperation
Clarification
Layers of Protection Analysis
EventFrequencyCalculation
Safety System
Narrative
QuantitativeRisk
Assessment
ProcessHazardAnalysis
ConsequenceAnalysisTerms
ConsequenceAnalysis
Our consultantsWe work across the world with engineering
organisations, equipment manufacturers
and end-users providing services across all
industry sectors in every aspect of functional
safety for systems, equipment and plant.
Our consultants are TÜV Functional Safety
Engineers, Quality focused through ISO 9001
Management Systems and Functional Safety
Management Experts.
Our PledgeFeasibility study, conceptual or detailed
design, installation, modification, operation,
maintenance through to decommissioning,
FSES have the experience, expertise and in
depth knowledge of the international standards
for Functional Safety as well as the practical
knowledge as to how they should be applied
so you can be assured that your installation
or project is compliant and remains compliant
with all aspects of the Functional Safety Life
Cycle requirements.
For further information visit our website, www.FSES.Global
Call on +44 (0) 1428 333 333 or [email protected]