8/12/2019 Fto1143 - Cpx Counter Module - Final

1/4

New multi-featured Counter Module adds flexible counting capability to CPX systems

Festo, the leaders in automation technology, introduces the latest addition to its well-

established CPX Modular Automation Platform, the CPX-2ZE2DA-PI Counter Module.

System builders can now incorporate counting capability simply by plugging a CPX Counter

Module directly into their CPX system; this eliminates the need for an external counter and

the associated costs it would present in terms of hardware and software integration effort,

space requirement, cabling and installation time.

Once installed, the Counter Modules high I/O, operational mode and parameterization

flexibility allows engineers and machine builders to set up sophisticated counting

applications with minimal effort. These can be implemented directly on the CPX system with

a wide range of plant sensors and actuators far more rapidly than was previously possible.

Festos CPX platform is a complete automation solution that integrates a wide choice of

pneumatic and electrical, analogue and digital I/O. CPX systems configured for specific

requirements are delivered pre-built, tested and ready for installation, enabling system

integrators to meet tight timeframes and budgets. For additional flexibility, the CPX platform

can operate as either a self-contained industrial PLC, or as a local unit on a Fieldbus or

Industrial Ethernet-based distributed system. In addition, a wide choice of I/O and connector

modules makes interfacing to process sensors and actuators easy.

The CPX Counter Module has two channels, allowing compact and cost-effective solutions

for applications with multiple sensors. Each channel accepts most 24 V and 5 V pulse and

single-ended or differential incremental encoders, as well as SSI absolute types; this

facilitates a wide range of length, position, speed and angular position measurement

applications. A direction signal, or 90phase shift inputs, on each channel allow extraction of

direction information for incremental encoders. Count continuously, count once and periodic

count modes at 24 V and 5 V levels are supported with pulse count frequencies to 1 MHz.

Output functions are also well supported; these include configurable 24 V digital, pulse,

pulse train, pulse-width modulation (PWM), On/Off control with delay and frequency output

to 20 kHz. In addition, by pairing the Counter channels 24 V DC motors can be controlled.

Date

04.02.2014

Our reference

FTO1143

Press Information

Festo Ltd.

Technology House

1 Fleetwood Park

Barley Way

Fleet

Hants. GU51 2QJ

Tel: 01252 775000

8/12/2019 Fto1143 - Cpx Counter Module - Final

2/4

The Counter Module has features to improve the quality of its results. These include

hysteresis to overcome encoder fluctuations, and limit monitoring and diagnostics. For ease

of use and added flexibility, parameterisation of each channel for its input and output

connections and functionality can be managed via a laptop using Festos free to download

FMT software, as are commissioning and diagnostics.

IP-rated CPX systems using the Counter Module can be mounted directly onto the machine

being controlled rather than relegated to a cabinet, as the module can achieve IP65-rated

ingress protection with an optional cover. This allows engineers to design more compact,

reliable and cost-effective systems with reduced cabling requirements. The module features

Festos new push-in connection technology, which makes connection to the counters inputs

and outputs quick and easy.

The Counter Module is designed for applications within the packaging, drive engineering,

process, food & drink, mechanical engineering and other industries. One example concerns

rotary or in-line filling machines of up to 18 nozzles each with flowmeters for accurate

volume dispensing. The Counter Module counts the flowmeter pulses and controls outputs to

the nozzle shut-off valves. Other examples include fast, bus- and control-independent

reactions for controlling fast-switching valves, valve opening times and direction changing

for fast drives, and pulse-width modulation control for thermostat temperature settings, drive

speed and lamp brightness.

These Counter Modules add an easily-installed, compact and highly functional counting

capability to CPX systems, comments Jacqui Hanbury, Product Manager at Festo GB. Inline with the CPXs Functional Integration philosophy, the modules connect directly to

encoders without need for A/D converters and associated wiring. Parameterisation is also

performed simply and quickly. Overall, this means that CPX users in a wide variety of

applications can start benefiting from the Counter Modules considerable flexibility with

minimal disruption or delay.

For further information on the CPX Counter Module please visit

www.festo.co.uk/press/countermodule, or for more information about Festos pneumatic and

electric automation solutions visit www.festo.co.ukor call 0800 626 422.

Ends

8/12/2019 Fto1143 - Cpx Counter Module - Final

3/4

Image number 1, caption: Festo introduces the latest addition to its well-established CPX

Modular Automation Platform, the CPX-2ZE2DA-PI Counter Module

Image number 2, caption: The multi-featured Counter Module adds flexible counting

capability to Festos CPX systems

News about Festos CPX Counter Module can be downloaded from

www.festo.co.uk/press/countermodule

Or, for Festos latest news go to www.festo.co.uk/gbpress.

Ref: FTO1143

About Festo

Festo is a leading international supplier of automation technology with a turnover in2012 of over 2.24 billion. Festo employs more than 16,000 people worldwide and is a

proven innovator and problem solver in the field of pneumatic and electrical automation

where it has established itself as the performance leader.

Festo Industrial Automationsinnovative strength is demonstrated through theintroduction of around 100 new products being launched every year. The company

invests 9% of its turnover in R&D resulting in over 2,900 patents held worldwide. For

more information about the companys products and services, please visit:www.festo.co.uk.

Festo Training & Consultingspecialises in the development of people, organisationsand technology skills. Offering a range of open courses, structured development

programmes and tailor-made, customer-specific projects, Festo trains over 42,000delegates worldwide every year. More information on the training and consulting

services can be found at www.festo-didactic.co.uk.

Festos Bionic Learning Network encapsulates the innovative nature of Festo, raising

awareness and attracting talent to the company. Exploring the links between nature andtechnology opens up new areas of innovation and demonstrates complex ideas in a

stimulating and enjoyable way. Festo works with an alliance of internal R&D, external

educational establishments and specialist companies, to advance the development ofbionic solutions for automation applications of the future. For more information about

Festos Bionic Learning Network, please visit: www.festo.com/gb/bionics

For more information please visit www.festo.com

8/12/2019 Fto1143 - Cpx Counter Module - Final

4/4

Telephone number for publication: - 01252 775000

Journalist contact:Dulcie Elliot, Technical Publicity

Tel: 01582 390984Email: delliot@technical-group.com