Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
OMC INDUSTRY CO.LIMTED
2018|En version1.0
DATASHEET
FTTH Drop Cable Idea for FTTH Project
www.omcftth.com [email protected] 0086-755-29163551
OMC INDUSTRY CO.LIMTED
2018|En version1.0
DATASHEET
Butterfly flat FTTH drop cable-1-4 cores FTTH cables are ideal for indoor cabling, end users directly cabling, and access network.
www.omcftth.com [email protected] 0086-755-29163551
Butterfly flat FTTH drop cable-1-6 cores
Cable structure
www.omcftth.com [email protected] 0086-755-29163551
Product introduction
Technical Data:
FTTH Indoor Drop Cable uses butterfly flat structure, whose optical fiber unit is positioned in the center. Two parallel
Fiber Reinforced Plastic (FRP) or Steel wire strength members are placed at the two sides. Then, the cable is completed
with LSZH sheath. FTTH indoor cable has a much greater bandwidth to carry data and less susceptible to interference
than common indoor fiber cables. With small diameter, water-resistant, soft and bendable characteristics, it's easy to
deploy and maintenance. In addition, the non-metallic strength member can provide lightning protection and anti-
electromagnetic interference. FTTH cables are ideal for indoor cabling, end users directly cabling, and access network.
Main Mechanical and Environmental Performances
Fiber Count 1F 2F 4F/6F
Strength member FRP/KFRP/ Solid Steel wire
0.45-0.52mm 0.45-0.52mm 0.45-0.52mm Cable diameter(mm) Approx. 2.0*3.0(±0.1) 2.0*3.0(±0.1) 2.0*3.0(±0.1) Cable weight(kg/km) Approx 7/10 7.5/10.5 8.5/11.5
Tensile Strength Short/ Long Term (N) 200/100 for steel wire strength member 80/40 for KFRP wire strength member
Crush resistance short/long term (N/100mm) 1000/500 Operating temperature range(°C) -40°C ~+70°C
Items Test Standard Specified Value Requirements
Tension IEC 60794-1-2-E1 See Technical data Additional attenuation:
≤0.4dB after test
Crush IEC 60794-1-2-E3 See Technical data Additional attenuation:
≤0.4dB after test
Impact IEC 60794-1-2-E4 R=300mm, 10Nm,
one in 3 different places Additional attenuation:
≤0.4dB after test
Repeated Bending IEC 60794-1-2-E6 R=30H Additional attenuation:
≤0.4dB after test
Temperature Cycling IEC 60794-1-2-F1 -40°C ~+70°C Attenuation change: ≤0.4dB/km after test
Steel wire
FRP wire
Black Color
White Color
White Color
FRP wire
Application
Butterfly flat FTTH drop cable-1-4cores
www.omcftth.com [email protected] 0086-755-29163551
Ideal Using of Butterfly Flat Indoor FTTH Drop Cable
Package
• Used end users directly cabling • Indoor cabling and distribution • Access network, fiber to the home
• Simple structure and light weight • Good strippability for easy splice, installation and maintenance • LSZH sheath ensures the flame retardant performance
Features
Butterfly Flat Indoor Drop Cable is widely used in fiber to the home (FTTH) network system, which can directly connect
the communication line from the LAN to the end users. Butterfly flat drop cable uses special low-bend-sensitivity fiber
to provide high bandwidth and excellent communication transmission, it's very suitable for indoor cabling, end users
directly cabling, and access network.
OMC INDUSTRY CO.LIMTED
2018|En version1.0
DATASHEET
Aerial Self-support FTTH Drop cable FTTH cables are ideal for indoor cabling, end users directly cabling, and access network.
www.omcftth.com [email protected] 0086-755-29163551
Aerial Self-support FTTH Drop cable-1-12 cores
Cable structure
www.omcftth.com [email protected] 0086-755-29163551
Product introduction
Technical Data:
Aerial Self-supporting FTTH drop cable is constructed with one or two single-mode fiber (G.657A ). The cable is protect-
ed by a dielectric strength member made of fiberglass reinforced plastic (FRP), steel wire and a LSZH outer jacket. De-
signed for outdoor installation, the cable is well suited for connections between the dome closure and small dwelling
unit/warehouse and independent villas.
Main Mechanical and Environmental Performances
Items Test Standard Specified Value Requirements
Tension IEC 60794-1-2-E1 See Technical data Additional attenuation:
≤0.4dB after test
Crush IEC 60794-1-2-E3 See Technical data Additional attenuation:
≤0.4dB after test
Impact IEC 60794-1-2-E4 R=300mm, 10Nm,
one in 3 different places Additional attenuation:
≤0.4dB after test
Repeated Bending IEC 60794-1-2-E6 R=30H Additional attenuation:
≤0.4dB after test
Temperature Cycling IEC 60794-1-2-F1 -40°C ~+70°C Attenuation change: ≤0.4dB/km after test
Fiber Count 1F 2F 4F/6F 8F/12F Self-supporting Strength member
Solid Steel wire/ Straned Steel wire 1.0mm 1.2mm
Strength member FRP/KFRP/Solid Steel wire
0.45-0.52mm 0.45-0.52mm 0.45-0.52mm 0.45-0.52mm Cable diameter(mm) Approx. 2.0*5.0(±0.1) 2.0*5.0(±0.1) 2.0*5.0(±0.1) 2.8*6.3(±0.1) Cable weight(kg/km) Approx 18.5/20 19/20.5 20/21.5 34/35
Tensile Strength Short/ Long Term(N) 200/100 for steel wire strength member 80/40 for KFRP wire strength member
Crush resistance short/long term (N/100mm) 1000/500 Operating temperature range(°C) -40°C ~+70°C
Solid
Solid Message Wire Stranded Message Wire
FRP Strength member Solid steel Strength member KFRP Strength member
Solid Message Wire
Application
www.omcftth.com [email protected] 0086-755-29163551
Ideal Solution by Using Self-supporting FTTH Drop Cable
Package
• Outdoor aerial application • Used in the FTTH projects • High performance optical network op-eration • High speed optical routes in building
• Self-supporting structure, light weight, easy to install • Durable and flame retardant LSZH sheath, low smoke zero halogen • Excellent mechanical and environmental performance • Steel wire as additional strength member has high tensile strength • Two parallel FRP strength members ensure good performance of anti- electromagnetic and crush resistance
Features
A high-capacity FTTH network gives you opportunities to build a competitive advantage and maintain an eco-
sustainable network that consumes less power. With simple structure and light weight, self-supporting FTTH drop cable
is highly recommended for the connection of outdoor and indoor cabling.
Aerial Self-support FTTH Drop cable-1-12 cores
OMC INDUSTRY CO.LIMTED
2018|En version1.0
DATASHEET
Single-Armored outdoor FTTH drop cable FTTH cables are ideal for indoor cabling, end users directly cabling, and access network.
www.omcftth.com [email protected] 0086-755-29163551
Single-Armored outdoor FTTH Drop cable-1-4 cores
Cable structure
www.omcftth.com [email protected] 0086-755-29163551
Product introduction
Technical Data:
Single-Armored outdoor FTTH drop cable are made for connecting user's
devices with outdoor feeder cable, especially suitable for duct installation.
The optical fiber unit is located in the center. The two parallel FRP
strength members improve the tensile strength. With the LSZH (LSZH,
Low smoke, Zero halogen) material jacket, this cable has good flame re-
tardant performance. Water blocking tape & AL-plastic tape provide
good water proof ability. Flame-retardant, FRP Strength Member, Double
-Jacket Armored Cable can be used in aerial and duct access cabling in
FTTH.
Main Mechanical and Environmental Performances
Items Test Standard Specified Value Requirements
Tension IEC 60794-1-2-E1 See Technical data Additional attenuation:
≤0.4dB after test
Crush IEC 60794-1-2-E3 See Technical data Additional attenuation:
≤0.4dB after test
Impact IEC 60794-1-2-E4 R=300mm, 10Nm,
one in 3 different places Additional attenuation:
≤0.4dB after test
Repeated Bending IEC 60794-1-2-E6 R=30H Additional attenuation:
≤0.4dB after test
Temperature Cycling IEC 60794-1-2-F1 -40°C ~+70°C Attenuation change: ≤0.4dB/km after test
Fiber Count 1F 2F 4F
Strength member 1 FRP/KFRP
0.5mm
Strength member 2 FRP/KFRP/Solid Steel wire
0.5mm 0.5mm 0.5mm Cable diameter(mm) Approx. 7.0±0.4mm 7.0±0.4mm 7.0±0.4mm Cable weight(kg/km) Approx 40 40 40 Tensile Strength Short/ Long Term(N) 1000/500 Crush resistance short/long term (N/100mm) 1000/500 Operating temperature range(°C) -40°C ~+70°C
Application
www.omcftth.com [email protected] 0086-755-29163551
Ideal Solution by Using Single-Armored Outdoor FTTH Drop Cable
Package
• Used in aerial and duct access cabling • Suitable for the connection between indoor and outdoor • Can be Installed in small bending envi-ronment
• FRP/Metal/KFRP strength member improves the tensile strength • LSZH flame-retardant inner and outer jacket has good flame retardant performance • Soft and flexible, good bending performance • water-proof tape prevent the ingression of water into the cable • All- plastic tape makes the cable crush resistant and moisture proof
Features
With low smoke, zero halogen and flame retardant inner and outer jacket, this cable can be especially used in aerial
and duct access cabling, suitable for the connection between indoor and outdoor. It can also be directly terminated
connecting to communication equipment.
Single-Armored outdoor FTTH Drop cable-1-4 cores
Item Unit Specification
Attenuation dB/km 1310nm≤0.4 ; 1550nm≤0.3
Dispersion Ps/nm. km 1285~1330nm≤3.5, 1550nm≤18.0
Zero dispersion wavelength Nm 1300~1324
Zero dispersion slope Ps/nm. km ≤0.095
Fiber cutoff wavelength Nm ≤1260
Mode field diameter Um 9.2±0.5
Mode field concentricity Um ≤0.8
Cladding diameter um 125±1.0
Cladding non-circularity % ≤1.0
Coating/cladding concentricity error Um ≤12.5
Coating diameter um 245±10
Bending, dependence induced attenuation
1550nm,
1turns,32mm diameter
100rums,60mm diameter
≤0.5 dB
Proof test kpsi ≥100
Optical fiber technical parameters-SMF
Optical fiber technical parameters-MMF
Item Unit Specification
Attenuation dB/km 850nm≤3.5
Bandwidth MHz*km
50/125µm 62.5/125µm
850nm≥200 850nm≥160
1300nm≥200 1300nm≥200
Step dB ≤0.1
Irregularities over fiber length and
point discontinuity
dB ≤0.1
Difference backscatter coefficient dB/km 50/125µm 62.5/125µm
≤0.08 ≤0.1
Cladding diameter um 125±1.0
Cladding non-circularity % ≤1.0
Coating/cladding concentricity error Um ≤12.5
Coating diameter um 245±10
Bending, dependence induced attenuation 850nm, 1300nm
100 turns,75mm diameter
≤0.5 dB
Proof test kpsi ≥100
ITU recommendation G.657 specifies two classes of single-mode bend insensi-tive fiber patch cables: G.657 A and G.657 B. Each category (A and B) is then divided into two sub-categories: G.657.A1, G.657.A2 and G.657.B1, G.657.B2. The minimum bend radius of G.657.A1 fibers is 10 mm, of the G.657.A2 and G.657.B1 fibers is 7.5 mm and of the G.657.B2 fibers is 5 mm. Among, ITU-T G.657.A1 and ITU-T G.657.A2 fibers are fully compliant with ITU-T G.652.D fibers.
www.omcftth.com [email protected] 0086-755-29163551
FTTH Drop Cable
www.omcftth.com [email protected] 0086-755-29163551
Technical Data-Transmission
Fiber type
Attenuation
OFL
bandwidth
Effective modal
bandwidth
10 Gigabit
Ethernet SX
Min bend
radius
Conditions
1310/1550nm 850/1300nm 850/1300n
850nm
850nm
Typical Maximum Typical Maximum
Unit dB/km dB/km dB/km dB/km MHZ.km MHZ.km mm
G652D 0.36/0.22 0.5/0.4 --- --- --- --- --- 16
G657A1 0.36/0.22 0.5/0.4 --- --- --- --- --- 10
G657A2 0.36/0.22 0.5/0.4 --- --- --- --- --- 7.5
50/125 --- --- 3.0/1.0 3.5/1.5 ≥500/500 --- --- 30
62.5/125 --- --- 3.0/1.0 3.5/1.5 ≥200/500 --- --- 30
OM3 --- --- 3.0/1.0 3.5/1.5 ≥1500/500 ≥2000 ≤300 30
OM4 --- --- 3.0/1.0 3.5/1.5 ≥3500/500 ≥4700 ≤550 30
BIF-OM3 --- --- 3.0/1.0 3.5/1.5 ≥1500/500 ≥2000 ≤300 7.5
BIF-OM4 --- --- 3.0/1.0 3.5/1.5 ≥3500/500 ≥4700 ≤550 7.5
Order Index
Cable - Fiber Count - Fiber Mode - Strength Member - Cable Color
W1- Butterfly Drop cable
1- 1 core 1 - G657A1 1– 2 x FRP Wire A- Blue
W2- Aerial Self-support Drop cable
2 -2 cores 2- G657A2/B2 2– 2 x KFRP Wire B- Orange
W3- Single-Armored outdoor drop cable
4-4 cores 3 - G657B3 3 – 2 x Solid Steel Wire C- Green
6-cores 4-OM1 A – 1 x Solid Steel Wire+2 x FRP D- Brown
8-cores 5-OM2 B – 1 x stranded Steel Wire+2 x FRP E- Grey
8-OM5 E– 1 x Solid Steel Wire+2 x Solid Steel Wire
H- Black
F-1 x stranded Steel Wire+2 x Solid Steel Wire
I- Yellow
T-12cores 6-OM3 C– 1 x Solid Steel Wire+2 x KFRP Wire
F- White
7-OM4 D– 1 x stranded Steel Wire+2 x KFRP Wire
G- Red
J- Purple
K- Pink
L– Aqua
M-Magenta
FTTH Drop Cable