Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Fuji Electric motorcontrol solutions
BM3 Manual Motor Starter Series• Rated Current: 0.16 to 32A, 10 to 63A
• Short Circuit Current Rating: 100kA at240V, 50kA at 480V, 10kA at 600V
• Widths: 45mm and 55mm
Contactor Features • .75 to 75 Kw
• 45 mm, 54 mm, 67 mm, 88 mm, 100 mm and 115 mm frame widths
• 60 to 300 hp
• 154 mm (180 - 221A models), 169 mm (285 - 361A models) frame widths
• AC and DC coils with a wide range of voltages
• Finger protection terminals
• Fuji SUPERMAGNETTM technology employed on the larger contactors for greater reliability
• IEC-947, UL, CSA, CE
Overload Features • Overload, open phase protection
• Isolated NO and NC contacts
• Ambient temperature compensation
• Trip indicator
• Finger protection terminals
• IEC-947, UL, CSA, CE
AUTOMATIONDIRECT has partnered with Fuji Electric tooffer a complete line of IEC motor controls.
The DUO line (SC-E contactors and TK-E overloads) isfully integrated so multiple motor control solutions arepossible with a minimum number of components. TheSC-E contactors work with either the conventionaladjustable overloads or the BM3 series MMS to createstarters for a variety of applications. The conventionalstarters in the DUO line can accommodate motors up to75 kilowatts at 415 VAC.
The larger contactors feature the SUPERMAGNET™ coilfor greater reliability and positive pick-up and drop-out.
The Odyssey Series of contactors and overloads alsofeature the SUPERMAGNET™ coil and come in sizes upto 225 kilowatts . The Odyssey Series contactors are available in four sizeswith overloads to match any motor to 225 kilowatts.
Both the DUO and Odyssey line are available in 24 VAC, 24 VDC, and 240 VAC coil versions.
ManualMotor Starter
Contactor
+
A combination starter can be constructed and wired in less time and ata lower cost while minimizing enclosure space requirements.
=+ +
UL Type E Self-ProtectedManual Motor Controller
and Contactor
Link Module Base Plate
SC-E02-220VAC (Speed Code F502)Fuji IEC 9A contactor, non-reversing, 3-pole, 43mm frame width, 220-240 VAC coil (purchase auxiliarycontacts separately)Price $19.00
4 Kw ContactorCHECK OUT OUR PRICES
AutomationDirectPrice/Part Number
Manual motor starter BM3RH, 45 mmframe width, rotary actuator, 4 to 6.3 FLA
9A contactor, non-reversing, 3-pole, 43mm frame width
Link module for electrically connect-ing BM3RH MMS to SC-E02 (F757)
Baseplate for mounting MMS and contactor for a combination starter
Auxiliary contact block for MMS, 1 N.O.contact mounts into the front of the MMS
Shunt trip device used to remotelytrip the MMS, 24 VAC 50/60 Hz.
$63F708
$19N757
$12F799
$16N787
$7F760
$22F769
Manual Motor Starter
CHECK OUT OUR PRICES
AutomationDirectPrice/Part Number
9A contactor, non-reversing, 3-pole, 43mm frame width
32A contactor, non-reversing, 3-pole,54 mm frame width
12A contactor, non-reversing, 3-pole, 43mm frame width, 24 VDC coil
125A contactor, non-reversing, 3-pole,100 mm frame width
thermal overload relay, 53 mm framewidth, FLA range 2.2 to 3.0 amps.
thermal overload relay, 77 mm framewidth, FLA range 65 to 95 amps
$19F502
$30F518
$35F507
$298F541
$32F587
$70F623
Contactors & Overloads
Automation Direct Pty LtdAsia and Pacific RegionAustralia Wide: 1-800-6330405New Zealand: 0-800-6330405Asia Pacific: 61-7-55874222Email: [email protected]: 61-7-55252053