Upload
vantruc
View
223
Download
1
Embed Size (px)
Citation preview
Specifications—a90° angular flow.—aActivated by direct action helicoid spring.—aSimplicity of construction ensuring minimum maintenance.—aMaterials carefully selected for their resistance to corrosion. With the exception of washers and couplings, the valves are free ofnon-ferric materials.—aInternal body designed to offer favourable flow profile.—aSealing surfaces treated and balanced, making them extremely tightness, even exceeding API-527 requeriments.—aGreat discharge capacity. For liquids typically used with openings similar to proportional safety valves.—aEquipped with draining screws for removing condensation.—aAuto-centering plug.—aThreaded shaft with lever positioner facilitating immediate manual action.—aElevator, independent of the seal, designed facilitate sudden opening when the steam expands and, with any fluid, guaranteesabsolute opening and closing precision.—aAll the valves are supplied sealed at the set pressure requested, simulating operational conditions, and are vigorously tested.—aAll components are numbered, registered and checked. If requested in advance, material, casting, test and efficiency certificateswill be enclosed with the valve, and the instruction manual, in accordance with P.E.D.97/23 EC.
Full lift safety valvewith spring loading.(AIT)
Model 485
The valve works as an automatic pressurereleasing regulator activated by the staticpressure existing at the entrance to the valveand is characterized by its ability to openinstantly and totally.Design in accordance with “ASME code sectionVIII”. Materials according ASME code section IIand ASTM.Connections according ASME B1.20.1standard.In accordance with the requirements of directive97/23/EC.EC valve verification certif ied by: TÜVInternacional Grupo TÜV Rheinland, S.L. EC0035.Type (Module D) EC examination report nº33530455 certified by: TÜV Internacional GrupoTÜV Rheinland, S.L.In compliance with the ATEX 94/9/CE directive“Protective equipment and systems for use inpotentially explosive atmospheres”.Other authorisations: ISCIR, ITI, NASTHOL, ...etc.
1 2
3 4
5 6
RANGE OF APPLICATION FOR THE SEALS
FLUID
Saturated steamLiquids and gases
SEALS
Silicone's rubberFluorelastomer (Viton)
PTFE (Teflon)
SET PRESSURE IN psi580,22,90 26,11 58 69,62 101,5 435,1
TVS
S V TTEMPERATURE IN °F
ACCORDING TO MANUFACTURERS RECOMMENDED BY VYCMINIMUM MAXIMUM
SVT
MINIMUM MAXIMUM
IMPORTANTDepending on demand:1.- Blocking screw which facilitates hydrostatic testing of the container which to be protected.2.- Rapid limiter to reduce the coefficient of discharge.3.- Fluorelastomer (Viton) seals, Silicone's rubber, PTFE (Teflon)... etc., achieving leakage levels3.- less than
The ranges of application allow certain flexibility although we recommend limiting them to:
(1) For temperatures exceeding 446°F apply metallic seal only.
4.- Flourelastomer (Viton) membrane and O-ring isolating the rotating or sliding parts from the4.- working fluid.5.- Electrical contact indicating open/closed.6.- Balance bellows to:mmmProtect the spring from atmospheric influences.mmmEnsure outside of valve body is totally tightness.mmmLevel out external or self-generated back pressure.7.- Possibility of manufacture in other types of material, for special operating conditions (high7.- temperatures, fluids, etc.).8.- Totally free of oil and grease, to work with oxygen, avoiding possible fire risks (UV- Oxy-8.- gen-VBG 62).9.- Special springs for critical temperatures.
-76-40
-445
+392+482+500
-58-22
-112
+239+302+446 (1)
psi in3
seg.0,2 x 10-8
EP AP ES CP
Informative brochure, without obligation and subject to our General Sales Conditions.
89365/14
Founded in 1914
www.vycindustrial.comAvenc del Daví, 22 Pol. Ind. Can Petit 08227 TERRASSA (Barcelona) SPAIN +34 93 735 76 90 +34 93 735 81 35 119 [email protected]
(1) 3/4" FNPT x 1 1/4" FNPT in stainless steel (ASTM A351 CF8M)(2) Maximum temperature EP, ES and CP 482ºF / AP 752ºF
Recommended ranges of application.Open and closed pressures in % of set pres-sure.Set pressures and regulating ranges.Coefficient of discharge.Discharge capacity.
See brochure Model 486.
Model 485 FNPTModel 485 FNPT
3/4"x1 1/4" = Model 486 NPS-1”x2”do = 0,63 1" x 1 1/2"= Model 486 NPS-1 1/2”x2”do = 0,79
ASTM A216 - WCBASTM A536 65 - 45 -12
ASTM A 216 - WCBASTM A 536 65 - 45 -12
ASTM A 536 65 - 45 -12 (1)ASTM A 570 - 36 (3)
ASTM A 570 - 36AISI 420AISI 420AISI 420
AISI 1045AISI 420AISI 420
AISI 1045AISI 1070AISI 420AISI 301
AISI 6150 (2)AISI 1045AISI 303AISI 303AISI 303
AISI 1015AISI 1015AISI 1015AISI 1035AISI 1045AISI 1035Graphite
PTFE (Teflon)GraphitePlastic
Sealing wireAISI 304AISI 316
PTFE (Teflon)Siliconeʼs rubber
Fluorelastomer (Viton)AISI 316CopperAISI 420
FluorelastomerFluorelastomer
ASTM A 351 - CF8MASTM A 351 - CF8MASTM A 351 - CF8MASTM A 351 - CF8MASTM A 351 - CF8M
AISI 304ASTM A 570 - 36
AISI 630AISI 630AISI 316AISI 303AISI 316AISI 316AISI 303AISI 301AISI 316AISI 301AISI 301AISI 303AISI 303AISI 303AISI 303AISI 316AISI 316AISI 316AISI 316AISI 316AISI 316
PTFE (Teflon)PTFE (Teflon)PTFE (Teflon)
PlasticSealing wire
AISI 304AISI 316
PTFE (Teflon)Siliconeʼs rubber
Fluorelastomer (Viton)AISI 316Copper
AISI 316Fluorelastomer (Viton)Fluorelastomer (Viton)
STAINLESS STEEL
BodyClosed bellOpen bellHoodElevatorCamLeverSeatingPlugLeadSpring pressSeparatorRodLever shaftGudgeonRingSafety ringSpringGlandHollow screwHollow screw nutBuffer nutRod check nutNutWasherStudScrewCapCouplingCouplingSealSealSealing wireCharacteristic platePlugSealing disk
WasherCouplingLimiterMembraneO-ring
PRESSURE IN psi
MAX. TEMP. IN °F
MIN. TEMP. IN °F
OPERATINGCONDITIONS
N°.PIECE PIECE
MATERIAL
01020304, 5, 6070809, 1011121314151617181920, 2122232425262728, 29, 4830, 313233, 34, 35363839404142434546
4749505152
3/4" x 1 1/4" a 1" x 1 1/2"FNPT1 x FNPT2Class
CAST STEEL
EP ESAP CP
300 Ibs
-20,2
300 Ibs
-20,2
667,17
248635,27
392
607,71
482
577,25
572
545,34
662
503,28
752
410
800590,59
248
517,79
392
458,32
572
417,70
842
CP NPT1ES NPT1AP NPT1EP NPT1
(3) 3/4" FNPT x 1 1/4" FNPT in Stainless steel (AISI 304)
FNPT1 X FNPT2
CONNECTIONS
API Orifice Letter
do
Ao
H
h1
L1
L2
R
WEIGHT
IN lb.
MODEL
D-E
0,63
7,91
12,60
4,41
3,15
2,56
1/4”
F
0,79
12,36
14,57
5,08
3,35
3,15
1/4"
Female thread NPT ASME B1.20.1
EP
12,46
AP
11,05
ES
11,51
EP
16,53
AP
14,77
ES
15,37
CP
11,95
CP
15,81
3/4" x 1 1/4" 1" x 1 1/2"
CAST STEELSTAINLESS STEEL
Whitworth cylindrical female threadISO 228/1 de 1978 (DIN-259)
300 Ibs
300 Ibs