Full Specifiers guide (Issue 06/09)

SPECIFIER’S GUIDEJUNE 2009

By appointment to Her Majesty The Queen

Manufacturers and Installers ofKitchen and Bathroom Furniture

Manhattan Furniture West Sussex

CI/SfB 73.1 X

MANHATTAN SPECIFIER’S GUIDE2

Carcase Key Features

Independent Certification

FIRA Standards

General dimensions (Noggins)

Cubic capacities

Coding guidelines

Base, Highboard, Tall and Wall Units

Base units

Base units - reduced depth

Base bottle storage units

Base corner units

Magic corner & Le-Mans

Base corner ‘L’ shaped units

Base unit corner fillets

Base corner post

Base drawer units (metal-sided

drawer system)

Base drawer units (full-extension soft

closing drawer system)

Base ‘angled’ end display units

Base ‘angled’ peninsular display unit

Base ‘square’ end display units

Base ‘square’ peninsular display unit

Feature: base ‘square’ end display

units

Feature: base ‘square’ peninsular

display unit

Base display back panels

Base display back panel fixing kit

Base fly end panels

Base gull-wing

Base oven housing units

Base microwave housing unit

Base integrated appliance space

conversion kit

Base unit infill panels

Base tray space

Base wine rack unit

Feature: base wine rack unit with

bottle supports

Base sink units

Base corner sink units

Sink Liners

Highboard housing units

Highboard Unit Infill Panels

Tall broom units

Tall unit corner fillets (for tall

housings set at 45 degrees)

650mm Extra deep ends

Tall housing units

Tall housing with Upgraded stays

Tall pull-out larder units

Tall unit infill panels

Tall unit shelves

Tall Wine Rack Units

Wall units (360mm high)

Wall units (575, 720 & 900mm high)

Wall units (dual handed doors)

Wall boiler housing units

3

4

4

5

5

5

6-32

6

6

6

7

7

10

9

9

11

11

12

12

12

12

12

12

10

10

10

13

13

13

14

14

14

13

13

8

9

8

15

15

15

19

14

16

18

17

19

19

19

20

20

20

21

Wall boiler dresser housing units

Wall corner units

Wall corner units 575 high

Wall corner ‘angled’ units

Wall corner ‘angled’ unit fillets

Wall display ‘angled’ unit fillets

Wall corner ‘L’ shaped units

Wall display units (360 & 492mm high)

Wall display units (720 & 900mm high)

Wall display ‘angled’ corner units

Wall display glazed dresser units

Wall display ‘angled’ end units

Wall display ‘square’ end units

Feature: wall ‘square’ end display

units

Wall display glazed units

Wall Display glazed units with

aluminium framed doors

Feature: wall display plate rack unit

Wall display dresser unit and worktop

infills

Wall display dresser tambour units

Wall display bi-folding units

Wall glass shelves

Wall unit infill panels

Wall dresser unit infill panels

Wall microwave housing units

Wall microwave with Upgraded stays

Window soffits

Feature: window soffits

Chimney hood soffits

Wall soil & vent pipe infill spice rack

Wall wine racks

Integrated extractor hood

Integrated extractor hood infill panel

Telescopic cooker hoods

Pilasters

Pilaster decor panels (16mm thick)

Decor and Framing panel

Decor panel self-adhesive cover caps

Upstands

Enable Units and Accessories

enable: Base units - reduced height

enable: Base drawer units

enable: Base drawer unit with pull-

out table surface

enable: Base corner units

enable: Mobile trolley unit

enable: Worktop blanking pelmet

enable: Base corner unit blanking

panel

enable: Half-circle, full-extension

carousels

enable: Highboard housing units

enable: Tall housing units

enable: Wall units

enable: Worktop support bracket

enable: Base unit support bracket

21

22

22

22

22

23

23

23

23

23

25

24

24

24

25

25

24

25

26

26

26

28

28

21

21

28

28

28

27

24

27

27

27

29

29

30-32

32

42

33-40

34

34

34

35

36

35

35

35

36

37

39

40

40

40

42-43

42

42

42

42

42

42

42

42

42

43

43

43

43

43

43

43

46-54

46

47

47

47

48

48

48

49

49

49

50

50

50

51

51

52

53

53

53

52

45

54

enable: Electronic worktop power lift

Kitchen Accessories

Cornice & Light fascia

Plinths & Plinth returns

Plinth Sealer

Plinth ventilation grills

Upstands

Half swing baskets

Breakfast bar legs

Pilasters

Self adhesive cover caps

Timber battens

Worktops

Worktop bolts

Cable Managment

Hinge Options

Upgraide for

Soft Close doors & Drawer

Bathrooms:

General dimensions (Noggins)

Base units

Corner base units

Drawer unit

Sink base units

WC units

Bidet units

Bath Bulkheads

Base infills

Corner post

Plinth

Plinth returns

Pedistal infills

Wall units

Wall unit infills

Tall units

Bath panels

Worktops

Cornice & Light fascia

Bathroom Detailing:

Tall units

Bulkheads

Worktops with WC base units

INTRODUCTION

Welcome to Manhattan’s Specifier’s Guide, our most comprehensive to date.

Carefully compiled to offer greater flexibility and versatility in order to meet your creative aspirations. For practical ergonomics of a totally functional kitchen to an

environment that is the heart of the home with added value features our range of units offers plenty of exciting solutions for both contemporary and traditional kitchens.

CONTENTS

INDEX

MANHATTAN SPECIFIER’S GUIDE 3

CARCASE MATERIAL KEY FEATURES

l All carcase units are produced from 16mm high density (660-670Kg/cubic

metre) melamine faced particle board. This is manufactured to BS EN 312-1, Class

1, low formaldehyde content and BS EN 312 Part 2 and meets the requirements of

both BS EN 7331, 1990 and BS 5669.

l All exposed ends are lipped using high quality 0.4mm matching PVC edging,

applied using a combination of hot melt glue, heat and pressure, which meets the

requirements of BS6250 and BS6222 Part 3, 1993 for moisture and heat resistance.

l All interiors are colour matched to the exterior of the carcase.

l End panels and display units are supplied in either white or a variety of

wood-grain MFC effects to co-ordinate with individual ranges.

HINGE KEY FEATURES

All carcase units are supplied with top quality, fully concealed hinges.

l Tested to BS6222 Part 2, Level H.

l Tested to 200,000 opening/closing cycles. Interestingly, a 15 year research study

showed that the most commonly used doors in the kitchen are opened and closed

up to 170,000 times in a 15 year period. Our hinges are therefore fit for at least 20

years of service.

l Hinge mounting plates are attached to the carcase by Euroscrews to provide

greater strength and durability.

l All hinges are supplied with stainless steel decorative cover caps.

l 107o opening hinges are supplied as standard.

l 172o

opening hinges are available on request.

l Option to have soft closing hinges, available as a upgrade for 107o & 172o opening

hinges available on request.

DRAWER SYSTEM KEY FEATURES

All Manhattan ranges come fitted with a metal-sided drawer system.

l Tested to BS6222 Part 2 1992, Level H, to ensure strength and durability.

l Pressed steel mounting brackets enable perfect alignment of drawer fronts.

l Long self closing action enables drawers to close at the slightest touch with Silent

running roller system.

l Manufactured from pressed formed high quality steel, with drawer sides and

runners finished in long lasting epoxy coating, with easily replaceable components in

the event of accidental damage

l Solid drawer bottom and back, manufactured from 16mm MFC to match the

carcase colour.

l Option to have soft closing drawers available as a upgrade, the drawer are twin-

walled with full extension runners, this option will be available for all base and tall

units.D

ADJUSTABLE LEGS KEY FEATURES

Manhattan’s Base, Highboard and Tall units are fitted with adjustable legs to

provide the following benefits;

l More accurate levelling of units to compensate for uneven floors, thus reducing

installation time and eliminating the need for packing wedges.

l Protection from moisture and flooding by keeping the units 150mm clear of the

floor.

l Provision of a natural service zone for plumbing, electric’s and ducting, enabling

services to run at skirting board level and facilitating installation. This also

ensures flush fitting of appliances.

l Better load distribution, thus reducing stress on fittings and joints.

l Easier fixing of plinth's.

l Allows flooring to be fixed after the installation of the units.

BASE UNIT KEY FEATURES

l 107o 3-way adjustable, fully concealed ‘Clip’ hinges

(172o hinges are available as an option).

l Metal-sided drawer system.

l Adjustable legs.

l 16mm MFC

l Removable solid back panel - 16mm MFC.

l Foil wrapped MDF mullions to 800, 1000 & 1200mm

units.

l Horizontal front rail.

l Adjustable shelves.

l High impact shelf retaining clips.

l Galvanised zinc metal wall fixing brackets.

l Easily removable continuous plinth.

l 70mm additional service zone.

l Shelves to 800, 1000 & 1200mm units are supported

with additional clips to front and back to prevent

bowing under load.

SINK UNIT KEY FEATURES

l Absence of back panel allows direct access to

plumbing and removes the need for an unsightly

notched panel.

l Shortened bottom panel with upturn provides a

70mm void for pipework and services to enter the

carcase.

l UPVC door closing strip to 800, 1000 & 1200mm

units.

l A back panel can be supplied as an optional extra.

WALL UNIT KEY FEATURES

l 316mm deep carcase to provide the additional

storage space so often needed.

l Concealed wall hanging brackets are 3-way

adjustable to ensure perfect alignment and maximum

loading capacity.

l Mini-fix cam dowel construction with additional

wooden dowels for extra strength and rigidity.

l Foil wrapped MDF mullions to 800, 1000 & 1200mm

units.

l Rear MFC blocks glued to the 800, 1000 & 1200mm

units for extra strength and rigidity.

l 8mm solid back panels to wood-grain effect display

units.

l Shelves to 800, 1000 & 1200mm units are supported

with additional clips at the front and back to prevent

bowing under load.

l 107o 3-way adjustable, fully concealed ‘Clip’ hinges

(172o

opening hinges are available on request).


‘HAPM’ LIFE ASSESSMENT

A benefit of achieving such high standards is that Manhattan achieves an HAPM life

assessment of 20 years for carcase components and 25 years for doors and drawer

fronts. Housing Association Property Mutual is a club consisting of more than 130

housing associations that provides insurance against premature failure of

components, materials and assemblies in new and refurbishment schemes. The

scheme is underpinned by a manual of lifespans that provide a series of generic

specifications for each component

BRITISH SAFETY COUNCIL AWARD

Manhattan is a member of the British Safety Council and has regularly received the

British Safety Council award.

INDEPENDENT CERTIFICATION

The first kitchen manufacturer to be awarded the Furniture Industry Research

Association ‘FIRA’ - Gold Award for Product to test level H, for heavy domestic use.

This provides:

l Confidence that the purchased product has been evaluated by the UK’s leading

furniture technology centre.

l Assurance that testing has been undertaken to the latest applicable British and

European Standards.

l Impartial verification of quality and performance.

The first contract kitchen manufacturer to also hold the Furniture Industry Research

Association ‘FIRA’ - Gold Award for Installation.

This provides:

l Confidence that our installation service has been evaluated and approved by the

UK’s leading furniture technology centre.

l Peace of mind that the product has been installed to the latest regulations and

highest quality.

l Impartial expert verification of quality.

STANDARDS REQUIRED TO MEET THE FIRA GOLD AWARD TO TEST LEVEL H

STRENGTH AND SAFETY REQUIREMENTS

BS 6222, Part 2, 1997 Level H - specification for strength requirements and

methods of test for fitted kitchen units*.

*FIRA test methods based on BS 4875 where other suitable methods are not

available.

BS 6222, Part 5 - Specification for strength requirements and methods for

test of peninsular units and breakfast bars.

BS EN 14749 - Domestic & Kitchen storage units and worktops safety

requirements

SURFACE FINISHES & ADHESION

BS 6222, Part 3 1999 - Domestic Kitchen Equipment. 'Performance

requirements for durability of surface finishes and adhesion of surfacing and

edging material'.

PARTICLEBOARD AND MDF

BS EN 312 2003 Particleboard Specification Type P2 and Type P3 (WPIF

Industry Standard)

BS EN 622 2006 Fibreboards Specifications Part 5 MDF Type MDF (WPIF

Industry Standard)

WORKTOPS

In addition to BS6222 Part 3 1999 (see above)

BSEN 438 2005 High pressure decorative laminates (HPL) - Sheets based on

Thermosetting Resins" Type HGP

Part 3 Classification and specifications for laminates less than 2 mm thick.

Part 2 Determination of properties.

(High and low relative tests are applied mainly to solid wood door types).

(Medium and low relative humidity tests apply to worktops).

In addition, FIRA carries out its own tests for Workmanship, Environmental

Response, and Ergonomic Assessment.

ENVIRONMENTAL PERFORMANCE

FIRA Standard 48 & FIRA Standard 6250 Specification Furniture materials

(Interior)

WORKMANSHIP

FIRA Standard 41 & FIRA Standard 6250 Specification Furniture materials

(Interior)

Subjective assessment of furniture for quality in terms of sharp edges and

visual defects

ERGONOMICS

Dimensions to comply with BS EN 1116, 1996 FTM's and planning

accordance with BS 3705 provision of space for domestic kitchen furniture.

AUDITING

FIRA audits on an annual basis to ensure that the quality and workmanship,

features of the Gold Award, are being maintained.

FOR PRODUCT FOR INSTALLATION

Winner 2006

StainlessSteel Hood

900WallUnit

BaseUnit

22

44

.00

20

00

.00

14

74

.00

13

92

.00

91

8.0

0

86

2.0

0

1250HighboardUnit

360WallUnit

21

72

.00

16

22

.00

2150HousingUnit &BroomUnits

BaseUnit


150mm

300mm

400mm

450mm

500mm

600mm

800mm

1000mm

1200mm

-

0.01

0.02

-

0.03

0.04

-

-

-

-

0.07

0.09

0.11

0.12

0.14

0.20

0.25

-

0.05

0.11

0.15

0.17

0.19

0.23

0.31

0.39

0.47

-

-

-

-

0.33

0.44

-

-

-

-

0.30

0.41

-

0.52

0.63

-

-

-

-

.033

0.45

-

0.57

0.69

-

-

-

-

-

-

-

0.05

0.06

0.08

0.10

-

0.03

0.06

0.08

0.09

0.10

0.12

0.16

0.20

0.24

0.04

0.07

0.10

0.11

0.12

0.15

0.20

0.25

0.30

Unit Width 568mm deep,140mm highdrawer units

568mm deep,575mm highbase units

568mm deep,720mm highbase units

568mm deep,1400mm highh/board units

568mm deep,2120mm high

tall units


tall units


wall units


wall units


wall units

CODING GUIDELINES

Most single door cabinets have left or right hand opening doors and it is therefore essential to quote the correct type when ordering. A door with hinges to the left

hand side as you are facing the cabinet is a left hand unit, a door with the hinges to the right hand side is a right hand unit.

If an open end display unit is specified on the right hand end of a run of base or wall units, please specify a right hand unit. Likewise, if it is specified on the left at the

end of a run of base or wall units, please specify a left hand unit.

Similarly, all base and base sink corner cabinets can be left or right handed. If the blanking panel is to the left when facing the cabinet, please specify a left hand

model; if the blanking panel is to the right, please specify a right hand unit.

Base sink cabinets can also be left or right handed. If the draining board is to be fitted to the left of the unit, please specify a left hand model; if the draining board is

to be fitted to the right, please specify a right hand model.

Height = from top to bottom Width = from left to right Depth = from back to front

BaseUnit

720WallUnit 360

WallUnit

StainlessSteel Hood

1250HighboardUnit

1970HousingUnit &BroomUnits

86

2.0

0

91

8.0

013

92

.00

16

22

.0021

72

.00

14

74

.00

16

40

.00

18

20

.00

18

84

.00

20

64

.00

360WallUnit

BaseUnit

BaseUnit

CUBIC CAPACITIES

These are calculated on the internal dimensions of the unit, disregarding all drawers, removable shelves and back panels

l Note: cubic capacities are calculated in cubic metres. All dimensions are in millimetres.

SIDE ELEVATION

SIDE ELEVATION FRONT ELEVATION

FRONT ELEVATION

GENERAL DIMENSIONS (F0R 720mm HIGH WALL UNITS WITH 2120mm TALL UNITS)

GENERAL DIMENSIONS (F0R 900mm HIGH WALL UNITS WITH 2300mm TALL UNIT


BASE UNITS - REDUCED DEPTH

With full-height door Door height 715mm

With full-height doors Door height 715mm

BASE UNITS



With drawer Drawer front, height 140mm

Door height 570mm

NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.

With drawers Drawer front, height 140mm

Door height 570mm


BASE BOTTLE STORAGE UNIT

With full-height, pull-out door Door height 715mm

NOTE: IDEALLY TO BE FITTED EITHER SIDE OF A HOB OR BASE OVEN HOUSING UNIT.NOTE: 2700 UNIT - ONLY AVAILABLE WITH A STAINLESS STEEL DOOR.NOTE: 2719 UNIT - THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE.

WIDTH 568 DEEP

STAINLESS 150 2700

STEEL

DOOR TO 150 2719

MATCH RANGE

WIDTH 316 DEEP

300 Lt Hd 2301

Rt Hd 2302

400 Lt Hd 2303

Rt Hd 2304

450 Lt Hd 2305

Rt Hd 2306

500 Lt Hd 2307

Rt Hd 2308

600 Lt Hd 2309

Rt Hd 2310

800 2311

900 2314

1000 2312

1200 2313

WIDTH 568 DEEP

300 Lt Hd 2601

Rt Hd 2602

400 Lt Hd 2611

Rt Hd 2612

450 Lt Hd 2775

Rt Hd 2776

500 Lt Hd 2621

Rt Hd 2622

600 Lt Hd 2641

Rt Hd 2642

800 2605

900 2688

1000 2615

1200 2637

300 Lt Hd 2603

Rt Hd 2604

400 Lt Hd 2613

Rt Hd 2614

450 Lt Hd 2451

Rt Hd 2452

500 Lt Hd 2623

Rt Hd 2624

600 Lt Hd 2643

Rt Hd 2644

800 2606

900 2453

1000 2616

1200 2636


WIDTH 568 DEEP

600 Lt Hd 2071

(min 336–378) Rt Hd 2072

800 Lt Hd 2661

(min 236–278) Rt Hd 2662

1000 Lt Hd 2663

(min 136–178) Rt Hd 2664

1200 Lt Hd 2059

(min 36–78) Rt Hd 2060

**800 Lt Hd 2789

(min 286–328) Rt Hd 2790

*800 Lt Hd 2028

(min 336–378) Rt Hd 2029

*1000 Lt Hd 2031

(min 236–278) Rt Hd 2032

*1200 Lt Hd 2065

(min 236–278) Rt Hd 2066

600 Lt Hd 2075

(min 336–378) Rt Hd 2076

800 Lt Hd 2657

(min 236–278) Rt Hd 2658

1000 Lt Hd 2627

(min 136–178) Rt Hd 2628

1200 Lt Hd 2063

(min 36–78) Rt Hd 2064

*800 Lt Hd 2019

(min 336–378) Rt Hd 2020

*800 Lt Hd 2023

(min 286–328) Rt Hd 2024

*1000 Lt Hd 2008

(min 236–278) Rt Hd 2009

*1200 Lt Hd2069

(min 236–278) Rt Hd 2070

BASE CORNER UNIT

With full-height door

600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT

(300mm Wide door) (400mm Wide door) (500mm Wide door) (600mm Wide door)

**800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT

(450mm Wide door) (500mm Wide door) (600mm Wide door) (2 X 400mm Wide doors)

NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.

With drawer

600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT


*800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT

(500mm Wide door) (450mm Wide door) 600mm Wide door) (2 X 400mm Wide doors)

NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.

BASE CORNER UNITS - WITH PULL-OUT ‘MAGIC CORNER’ MECHANISM

With full-height door Carcase height 720mm

Door height 715mm


WIDTH 568 DEEP

1000 Lt Hd 2195

(min 136-178) Rt Hd 2196

*1000 Lt Hd 2197

(min 236-278) Rt Hd 2198

1000mm WIDE UNIT

(500mm Wide door)

*1000mm WIDE UNIT

(600mm Wide door)

KITCHEN ACCESSORY - HALF CIRCLE, FULL EXTENSION CAROUSELS

Carousels for use in corner units

NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT.NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM.

SIZE CODE

000 X 000 MECH100A

CORNER BASE UNIT WITH LE MANS STORAGE MECHANISM

The Le Mans storage shelves move completely out of the unit for easy access to both shelves

WIDTH CODE

1000 Lt Hd 2055

(min 136-178) Rt Hd 2056


WIDTH 316 DEEP

WIDTH 568 DEE

500 Lt Hd 2669

Rt Hd 2670

600 Lt Hd 2671

Rt Hd 2672

800 2655

900 2676

1000 2665

1200 2666

500 Lt Hd 2691

Rt Hd 2692

600 Lt Hd 2696

Rt Hd 2690

1000 Lt Hd 2633

Rt Hd 2634

1200 Lt Hd 2653

Rt Hd 2654

800 2001

900 2013

1000 2699

1200 2014

WIDTH CODE

500 FACM355A

600 FACM349A

800 FACM350A

900 FACM356A

1000 FACM351A

1200 FACM357A

SINK BOTTOM LINERS

Optional extra

BASE SINK UNITS



With non-working drawer Non-working drawer front, height 140mm

Door height 570mm

With non-working drawer and drawer Drawer front, height 140mm

Door height 570mm


With non-working drawers Non-working drawer front, height 140mm

Door height 570mm

WIDTH CODE

600 Lt Hd 2749

Rt Hd 2750

BELFAST SINK UNIT

NOTE: TO SUIT EXTERNAL SIZE OF 200MM DEEP SINK, USING A SIDE HUNG DOOR 450MM HIGH WITH PANEL ABOVE, THIS SIZE DOOR IS NOT PREFERRED DUE TO SAGGING ONTHE HINGES.


WIDTH 568 DEEP

500 6705

600 6706

800 6708

900 6709

1000 6710

1200 6712

WIDTH 568 DEEP

WIDTH 568 DEEP

800 Lt Hd 2625

(min 236–278) Rt Hd 2626

**800 Lt Hd 2791

(min 286–328) Rt Hd 2792

1000 Lt Hd 2631

(min 136–178) Rt Hd 2632

1200 Lt Hd 2015

(min 36–78) Rt Hd 2016

*800 Lt Hd 2645

(min 336–378) Rt Hd 2646

*1000 Lt Hd 2649

(min 236–278) Rt Hd 2650

*1200 Lt Hd 2651

(min 236–278) Rt Hd 2652

800 Lt Hd 2677

(min 236–278) Rt Hd 2678

1000 Lt Hd 2679

(min 136–178) Rt Hd 2680

1200 Lt Hd 2017

(min 36–78) Rt Hd 2018

*800 Lt Hd 2681

(min 336–378) Rt Hd 2682

*1000 Lt Hd 2685

(min 236–278) Rt Hd 2686

*1200 Lt Hd 2693

(min 236–278) Rt Hd 2694

BASE SINK BACK PANELS

Optional extra Height 430mm

BASE SINK CORNER UNITS


800mm WIDE UNIT **800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT


*800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT

(500mm Wide door) (600mm Wide door) (2 X 400mm Wide door)


With non-working drawer

800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT

(400mm Wide door) (500mm Wide door) (600mm Wide door)

*800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT

(500mm Wide door) (600mm Wide door) (2 X 400mm Wide door)


WIDTH HIGH CODE

636 X 636 720 6018

HEIGHT CODE

720 6022

720 6020

720 6211

BASE CORNER POST

NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER.

BASE UNIT CORNER FILLETS

NOTE: FOR USE WITH FLY ENDS WHEN A FREESTANDING APPLIANCE SPACE IS SPECIFIED AGAINST A 45 DEGREE FALSE WALL

NOTE: FOR USE WITH A 600MM BASE UNIT SET AGAINST A 45 DEGREE FALS WALL WITH A 600MM WALL UNIT AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913

NOTE: FOR USE WITH A 600MM OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913


BASE CORNER ‘L’ SHAPED UNITS


With full-height doors +carousels Door height 715mm

With doors and drawers Drawer height 140mm

Door height 570mm


WIDTH 568 DEEP

936 2040

936 2041

936 2042

BASE DISPLAY PENINSULAR BACK PANEL FIXING KIT

NOTE: TO BE SPECIFIED IN CONJUNCTION WITH A BASE PENINSULAR BACK PANEL (SEE ABOVE).

CODE

6012

BASE FLY END PANELS

Without notch Panel height 900mm

WIDTH DEPTH CODE

16 591 6326

668 6327

HEIGHT WIDTH CODE

VARIABLE VARIABLE 9036

720 1200 8270

720 1600 8271

720 2000 8272

720 2300 8273

900 1200 8275

900 1600 8276

900 2000 8277

900 2300 8278

9

BASE DISPLAY PENINSULAR BACK PANELS

[[[

NOTE: PENINSULAR BACK PANELS SHOULD BE SPECIFIED EITHER 720MM OR 870MM HIGH TO SUIT ADJACENT UNITS. REMEMBER TO SPECIFY HEIGHT, LENGTH AND GRAINDIRECTION WHEN ORDERING.NOTE: WHEN USED IN CONJUNCTION WITH BASE DISPLAY PENINSULAR UNITS, A BACK PANEL FIXING KIT 6012 MUST BE SPECIFIED (SEE BELOW).



WIDTH 568 DEEP

500 2607

600 2619

600 2687

500 2647

600 2675

300 2783

400 2784

450 2767

500 2785

600 2786

BASE DRAWER UNITS WITH ‘METAL-SIDED’ THREE-QUARTER OPENING DRAWERS

Three drawer unit - comprising top drawer and two high-sided drawers

450mm deep drawer box, finished in white

1 X Drawer front, height 140mm

2 X Deep drawer fronts, height 283mm

Three drawer unit - comprising top drawer and two pan drawers with railing system



2 X Pan drawer fronts, height 283mm

Four drawer unit - comprising three drawers and one high-sided drawer


3 X Drawer fronts, height 140mm


Five drawer unit - comprising five standard height drawers



SOFT CLOSING DOORS - UPGRAGE OPTION

Available with to suit all base, wall, highboard and tall units as an optional upgrade

NOTE: THE CODE HING064A = ALL THE DOORS IN ONE KITCHEN, MARK THE QUANTITY OF DOORS IN THE KITCHEN NEXT TO THE CODE HING064ANOTE: NOT SUITABLE FOR BI-FOLD WALL UNITS

DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION, SOFT CLOSING DRAWERS - UPGRAGE OPTION

Available as un upgrade option to all base and tall units

NOTE: THE CODE MECH126A = ALL THE DRAWERS IN ONE KITCHEN, MARK THE QUANTITY OF DRAWERS IN THE KITCHEN NEXT TO THE CODE MECH126ANOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE

CODE

CODE

HINGE064A

CODE

MECH126A

WIDTH 568 DEEP

500 2435

600 2436

800 2438

1000 2440

500 2445

600 2446

800 2448

1000 2450

BASE DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION, SOFT CLOSING DRAWERS

Two drawer unit

450mm deep drawer box, finished in grey


NOTE: PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50NOTE: ON ALL 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE.

Three drawer unit

450mm deep drawer box, finished in grey

1 X Cutlery drawer, height 140mm


NOTE: INTERNAL CUTLERY DRAWERS AND PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50NOTE: ON 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE.


FEATURE UNIT: BASE ‘SQUARE’ DISPLAY END UNITS

MADE FROM 28MM MFC

FEATURE UNIT: BASE ‘SQUARE’ DISPLAY PENINSULAR UNITS

NOTE: MADE FROM 28MM MFC640MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036

WIDTH 568 DEEP

320 Lt Hd 2797

Rt Hd 2798

WIDTH 300 DEEP

640 2796

BASE ‘ANGLED’ END DISPLAY UNITS

With angled shelves

BASE ‘ANGLED’ DISPLAY PENINSULAR UNITS

With angled shelves

NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8)

BASE ‘SQUARE’ END DISPLAY UNITS

With square shelves

BASE ‘SQUARE’ DISPLAY PENINSULAR UNITS

With square shelves

NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8)

WIDTH 568 DEEP

280 Lt Hd 2600

Rt Hd 2608

WIDTH 280 DEEP

600 2740

WIDTH 568 DEEP

280 Lt Hd 2759

Rt Hd 2760

WIDTH 280 DEEP

600 2758

MATERIAL CODE


BASE MICROWAVE HOUSING UNIT

To suit an integrated microwave

NOTE: THE MICROWAVE MAKE AND MODEL MUST BE SPECIFIED SO THAT EITHER A PAN DRAWER OR INFILL CAN BE MANUFACTURED TO SUIT.

BASE OVEN HOUSING UNITS

To suit an integrated oven

Aperture height 600mm

Infill height 116mm

NOTE: TOP RAIL TO BE REMOVED ON SITE.

To suit an integrated oven unit, with plinth drawer under

Aperture height 600mm


NOTE: TOP RAIL TO BE REMOVED ON SITE.

WIDTH 568 DEEP

600 4614

WIDTH 568 DEEP

600 4615

600 4620

WIDTH 316 DEEP

150 8041

WIDTH 316 DEEP

300 8084

With chrome bottle supports

BASE WINE RACK UNIT

NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFI

FEATURE BASE WINE RACK UNIT

NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED.

BASE GULL-WING UNITS

With full-height doors 715mm high

WIDTH 568 DEEP

330 Lt Hd 2639

Rt Lh 2638


EXTRA DEEP BASE UNIT END PANELS - TO SUIT UNITS USING 650mm DEEP WORKTOPS HAND CODE

LH 6331

RH 6332

Left Hand Right Hand

2120mm 2300mm

EXTRA DEEP PLINTH RETURNS TO SUIT UNITS USING 650mm DEEP WORKTOPS

EXTRA DEEP TALL UNIT END PANELS - TO SUIT UNITS USING 650mm DEEP WORKTOPS

UNITS USING

HEIGHT CODE

179 6079

HEIGHT CODE

1970 6333

2300 6334

How to order the extra deep end panels:

1: Order the base or tall unit that needs an extra deep end as a

standard unit code. Then add SJC A5666 so the extra deep end can

be added to the correct unit on the order

2: Order the extra deep end panel to suit that unit, using the new

codes. Then add SJC A5666 so the extra deep end can be added to

the order.

3: The extra deep end panel will then be fitted to the required unit

on site by one of our fitters

BASE TRAY SPACE

NOTE: SUPPLIED 300MM WIDE, TO BE CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 100MM.

BASE UNIT INFILL PANELS

Panel height 720mm

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.

BASE UNIT INTEGRATED APPLIANCE CONVERSION KIT

NOTE: USED TO CONVERT A FREE-STANDING APPLIANCE SPACE OF 620MM TO AN INTEGRATED SPACE OF 600MM.NOTE: STANDARD ‘S’ FRAME FRONT STRIP OF 50MM IS REPLACED WITH THIS SPECIAL FRONT STRIP OF 70MM ON SITE.

WIDTH 568 DEEP

300 6001

WIDTH 720 HIGH

150 8030

300 8013

400 8088

HEIGHT WIDTH CODE

720 70 6019


HIGHBOARD HOUSING UNITS - 1400MM HIGH

To suit an integrated single oven

Unit height 1400mm

Carcase height 1250mm

Aperture 590mm

Infill panel to suit

Door height 570mm

To suit an integrated double oven

Unit height 1400mm


Aperture 876mm


Drawer height 283mm

To suit a refrigerator and/or freezer

Unit height 1400mm


Aperture 1217mm

Door height 1245mm

HIGHBOARD UNIT INFILL PANELS

Panel height 1250mm

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.

WIDTH 568 DEEP

600 Lt Hd 4801

Rt Hd 4802

600 4805

WIDTH 1250 HIGH

150 8085

300 8086

400 8089

WIDTH 2120 HIGH 2300 HIGH

300 Lt Hd 3643 Lt Hd 3683

Rt Hd 3644 Rt Hd 3684

400 Lt Hd 3645 Lt Hd 3685

Rt Hd 3646 Rt Hd 3686

500 Lt Hd 3647 Lt Hd 3687

Rt Hd 3648 Rt Hd 3688

600 Lt Hd 3649 Lt Hd 3689

Rt Hd 3650 Rt Hd 3690

2120 high 2300 high

TALL BROOM UNITS

Unit height 2120mm


Top door height 1245mm

Bottom door height 715mm

or

Unit height 2300mm




HIGHBOARD LARDER / BROOM UNITS - 1400MM HIGH

Unit height 1400mm


Door height 1245

WIDTH 568 DEEP

300 Lt Hd 2809

Rt Hd 2810

400 Lt Hd 2811

Rt Hd 2812

500 Lt Hd 2813

Rt Hd 2814

600 Lt Hd 2815

Rt Hd 2816

600 Lt Hd 4815

Rt Hd 4816


DEPTH WIDTH 2120 HIGH 2300 HIGH

568 600 Lt Hd 4621 Lt Hd 4651

Rt Hd 4622 Rt Hd 4652

568 600 Lt Hd 4647 Lt Hd 4649

Rt Hd 4648 Rt Hd 4650

568 600 4667 4669

568 600 Lt Hd 4671 Lt Hd 4673

Rt Hd 4672 Rt Hd 4674

2120 high 2300 high

2120 high 2300 high

2120 high 2300 high

2120 high 2300 high

TALL HOUSING UNITS

To suit a single oven

Unit height 2120mm




Aperture 664mm


or

Unit height 2300mm




Aperture 699mm


To suit a single oven and microwave with short base door

Unit height 2120mm




Aperture 1030mm


or

Unit height 2300mm




Aperture 1115mm


To suit a single oven and microwave with pan drawers

Unit height 2120mm




Aperture 1030mm

Bottom pan drawers 2 X height 283mm

or

Unit height 2300mm




Aperture 1115mm


To suit a double oven with short base door

Unit height 2120mm




Aperture 932mm


or

Unit height 2300mm




Aperture 989mm


SPECIFICATION OF APPLIANCES TO SUIT A HOUSING UNIT

Manhattan can supply both highboard and tall housing units to accommodate a wide selection of built in ovens, refrigerators, freezers, microwaves and combinations.

The appliance manufacturer and model must be specified when ordering to enable us to prepare exact sizes and if necessary, detail special units to suit individual

requirements.

Where the appliance height is less than the aperture size, an infill panel is fitted.

All appliances must be fitted strictly in accordance with the manufacturer’s instructions.

Please check the manufacturer’s appliance instructions with regard to specific ventilation requirements: it may be necessary to notch the plinth locally.


TALL HOUSING UNITS - CONTINUED

To suit a double oven with pan drawers

Unit height 2120mm




Aperture 932mm


or

Unit height 2300mm




Aperture 989mm


To suit a double oven and microwave with pan drawer

Unit height 2120mm




Aperture 1311mm


or

Unit height 2300mm




Aperture 1396mm


To suit a refrigerator and/or freezer

Unit height 2120mm




Aperture 1937mm

or

Unit height 2300mm




Aperture 2117mm

NOTE: DOOR ORIENTATION WILL VARY DEPENDING ON THE APPLIANCE THAT HAS BEEN SPECIFIED.

TALL PULL-OUT LARDER UNITS

Unit height 2120mm




or

Unit height 2300mm





568 300 3625 3627


568 600 Lt Hd 4659 Lt Hd 4661

Rt Hd 4660 Rt Hd 4662

568 600 4663 4665

568 600 Lt Hd 4645 Lt Hd 4655

Rt Hd 4646 Rt Hd 4656

2120 high 2300 high

2120 high 2300 high

2120 high 2300 high

2120 high 2300 high

TALL HOUSING UNITS with UPGRADED TOP DOOR STAY

To suit a single oven and microwave with short base door

Unit height 2120mm




Aperture 1030mm


or

Unit height 2300mm




Aperture 1115mm


To suit a single oven and microwave with pan drawers

Unit height 2120mm




Aperture 1030mm


or

Unit height 2300mm




Aperture 1115mm


To suit a double oven and microwave with pan drawer

Unit height 2120mm




Aperture 1311mm


or

Unit height 2300mm




Aperture 1396mm


To suit a double oven with pan drawers

Unit height 2120mm




Aperture 932mm


2120 high



568 600 Lt Hd 4683 Lt Hd 4685

Rt Hd 4684 Rt Hd 4686

568 600 4679 4680

568 600 4681 4682

568 600 Lt Hd 4687

Rt Hd 4688

2120 high 2300 high

2120 high 2300 high

2120 high 2300 high


TALL HOUSING UNITS with UPGRADED TOP DOOR STAY - CONTINUED

To suit a double oven with short base door

Unit height 2120mm




Aperture 932mm


DEPTH WIDTH 2120 HIGH

568 600 Lt Hd 4677

Rt Hd 4678

2120 high

DISPLAY WINE RACKS

NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED.


150 3700 3701

2120 high 2300 high

TALL UNIT INFILL PANELS

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.NOTE: 1970MM HIGH INFILL PANEL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM HIGH INFILL PANEL TO BE USED WITH 2300MM HIGH TALL UNITS.

TALL UNIT SHELVES

NOTE: SHELVES MANUFACTURED FROM 16MM MELAMINE FACED CHIPBOARD, LIPPED WITH 0.6MM PVC EDGING. COLOUR DECIDED BY RANGE CHOICES.NOTE: SUPPLIED AS A PAIR WITH SHELF CLIPS.NOTE: SHELF WIDTH ANNOTATED IS NOMINAL TO SUIT UNITS.


150 8032 8031

300 8016 8014

400 8092 8093

WIDTH CODE

300 6027

400 6024

500 6028

600 6029

TALL UNIT CORNER FILLETS - FOR OVENS SET AT 45 DEGREES

To suit a tall unit set at 45 degrees

To suit a tall oven housing set at 45 degrees

1970 HIGH 2150 HIGH

6207 6209

6210 6213

NOTE: FOR USE WITH A 600MM TALL UNIT SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALL UNITS.NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS.

NOTE: FOR USE WITH A 600MM TALL OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALLUNITS. THIS PREVENTS THE OVEN HANDLE CLASHING WITH ADJACENT DOORS.NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS.


WALL UNITS

With full-height, lift-up door

NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE.NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS

WIDTH 360 HIGH

500 8360

600 8361

800 8371

1000 8363

WALL UNITS - DUAL HANDED

With full-height, dual-handed doors

NOTE: IDEALLY USED ADJACENT TO A COOKER HOOD TO PREVENT DOOR CLASHES, OR INTO A CORNER ALSO TO PREVENT DOOR CLASHES.


800 Lt Hd 8803 Lt Hd 8813

Rt Hd 8804 Rt Hd 8814

900 Lt Hd 8811 N/A

Rt Hd 8812 N/A

1000 Lt Hd 8805 Lt Hd 8815

Rt Hd 8806 Rt Hd 8816

720 high 900 high

WALL UNITS with UPGRADE TOP DOOR STAY

With full-height, lift-up door

NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE.NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS

WIDTH 360 HIGH

500 8375

600 8376

800 8378

1000 8380

WALL UNITS 575mm HIGHWith full-height door WIDTH 575 DEEP

300 Lt Hd 8539

Rt Hd 8540

400 Lt Hd 8541

Rt Hd 8542

450 Lt Hd 8551

Rt Hd 8552

500 Lt Hd 8543

Rt Hd 8544

600 Lt Hd 8545

Rt Hd 8546

800 8547

900 8553

1000 8548

WALL UNITS


WIDTH 720 HIGH 900 HI

300 Lt Hd 8791 Lt Hd 8901

Rt Hd 8792 Rt Hd 8902

400 Lt Hd 8711 Lt Hd 8911

Rt Hd 8712 Rt Hd 8912

450 Lt Hd 8837 N/A

Rt Hd 8838 N/A

500 Lt Hd 8721 Lt Hd 8921

Rt Hd 8722 Rt Hd 8922

600 Lt Hd 8741 Lt Hd 8941

Rt Hd 8742 Rt Hd 8942

800 8706 8906

900 8733 N/A

1000 8716 8916

1200 8758 8958

720 high 900 high

720 high 900 high

575 high 575 high


WALL BOILER HOUSING UNITS



WALL BOILER HOUSING DRESSER UNITS


NOTE: VENTILATION GRILLS ARE FITTED ON OPPOSITE SIDE TO THE HINGES. IT IS IMPORTANT THEREFORE THAT THESE ARE NOT COVERED BY ANYOTHER UNITS.NOTE: THE DRAWER IS ATTACHED TO THE CARCASE AND IS A NON-WORKING DRAWER.


316 500 Lt Hd 8795 Lt Hd 8895

Rt Hd 8796 Rt Hd 8896

600 Lt Hd 8797 Lt Hd 8897

Rt Hd 8798 Rt Hd 8898

380 500 Lt Hd 8765 Lt Hd 8965

Rt Hd 8766 Rt Hd 8966

600 Lt Hd 8761 Lt Hd 8961

Rt Hd 8762 Rt Hd 8962


380 600 Lt Hd 8883 Lt Hd 8887

Rt Hd 8884 Rt Hd 8888

720 high 900 high

720 high 900 high

1212 high 1392 high

WALL MICROWAVE HOUSING UNIT with UPGRADED TOP DOOR STAY

To suit 316mm deep wall units

NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT.


500 4675 4697

600 4676 4698

720 high 900 high

WALL MICROWAVE HOUSING UNIT


NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT.


500 4635 4695

600 4636 4696

720 high 900 high


WALL CORNER UNITS

With full-height door - 600mm carcase width




WALL CORNER ‘ANGLED’ UNIT FILLETS

NOTE: FILLETS SUPPLIED AS A PAIR.NOTE: FILLETS MUST BE SPECIFIED WHEN USING WALL ANGLED CORNER UNITS (8775, 8776, 8795 AND 8796) IN THE MIDDLE OF A RUN; THIS IS TO ENSURE BASE AND WALLUNIT ALIGNMENT FOR PLANNING REQUIREMENTS (SEE ABOVE).

WALL CORNER ‘ANGLED’ UNITS


NOTE: FILLETS MUST BE SPECIFIED SEPARATELY TO SUIT MODULAR REQUIREMENTS WHEN USED IN THE MIDDLE OF A RUN (SEE BELOW) NOTE: WHEN USED AT THE END OF A RUN A DECOR PANEL MUST BE SPECIFIED (CODES 8018/8068 FOR 16MM MFC, OR 8257/8258 FOR 28MM MFC).

DOOR WIDTH 720 HIGH 900 HIGH

300 Lt Hd 8793 Lt Hd 8801

(min 36-78) Rt Hd 8794 Rt Hd 8802

400 Lt Hd 8821 Lt Hd 8861

(min 136-178) Rt Hd 8822 Rt Hd 8862

450 Lt Hd 8823 N/A

(min 186-228) Rt Hd 8824 N/A

500 Lt Hd 8825 Lt Hd 8865

(min 236-278) Rt Hd 8826 Rt Hd 8866

500 Lt Hd 8827 Lt Hd 8867

(min 36-78) Rt Hd 8828 Rt Hd 8868

600 Lt Hd 8829 Lt Hd 8869

(min 136-178) Rt Hd 8830 Rt Hd 8870

600 Lt Hd 8831 Lt Hd 8871

(min 36-78) Rt Hd 8832 Rt Hd 8872


618 Lt Hd 8775 Lt Hd 8975

Rt Hd 8776 Rt Hd 8976


18 6037 6039

720 high 900 high

720 high 900 high

720 high 900 high

720 high 900 high

720 high 900 high

WALL CORNER UNIT 575mm HIGH


UNITS

DOOR WIDTH WIDTH 575 HIGH

300 600 Lt Hd 8549

(min 36-78) Rt Hd 8550

575 high



250 8713 8913


400 8740 8940

450 8745 8945

500 8725 8925

600 8728 8928


400 8364 N/A

500 8365 N/A

600 8366 8466


636 8755 N/A

WALL DISPLAY ‘ANGLED’ UNIT FILLETS

NOTE: FILLETS SUPPLIED AS A PAIR.NOTE: FOR USE WITH A 600MM OVEN HOUSING AND 6211 FILLETS (SEE PAGE 9) SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER HOOD AND WALL DISPLAYANGLED CORNER UNITS 8713/8913 (SEE PAGE 22).

WALL DISPLAY UNITS

WALL DISPLAY UNITS


WALL CORNER ‘L’ SHAPED UNITS


WALL DISPLAY ‘ANGLED’ CORNER UNITS

720 high

720 high 900 high

720 high 900 high

360 high 492 high


34 6038 6041

W


FEATURE UNIT: WALL DISPLAY PLATE RACK UNIT

Chrome plate supports



500 8757 N/A

600 8759 N/A

WALL DISPLAY END UNITS

With angled shelves

With square shelves

FEATURE UNIT: WALL DISPLAY END UNITS

FEATURE UNIT: WALL DISPLAY END UNITS

NOTE: NOT AVAILABLE TO SUIT 900MM HIGH WALL UNITS.THIS UNIT IS MADE FROM 28MM MFC


320 Lt Hd 8799 N/A

Rt Hd 8800 N/A


280 Lt Hd 8705 Lt Hd 8905

Rt Hd 8700 Rt Hd 8900

280 Lt Hd 8779 Lt Hd 8979

Rt Hd 8780 Rt Hd 8980

720 high 900 high

720 high 900 high

WALL WINE RACK



150 8707 8907

720 high 900 high


WALL DISPLAY GLAZED UNITS


NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.

With full-height doors

NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.

WALL DISPLAY ‘ALUMINIUM FRAMED GLAZED’ UNITS


NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.

WALL DISPLAY ‘ALUMINIUM FRAMED GLAZED’ UNITS

NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: 800 AND 1000MM UNITS ARE SUPPLIED WITH DOUBLE DOORS.


400 Lt Hd 8719 N/A

Rt Hd 8720 N/A

500 Lt Hd 8723 Lt Hd 8923

Rt Hd 8724 Rt Hd 8924

600 Lt Hd 8743 N/A

Rt Hd 8744 N/A

800 8714 N/A

1000 8717 8917

WIDTH 360 HIGH

500 8369

600 8370

800 8367

1000 8368


400 Lt Hd 8853 N/A

Rt Hd 8854 N/A

500 Lt Hd 8847 N/A

Rt Hd 8848 N/A

600 Lt Hd 8855 N/A

Rt Hd 8856 N/A

800 8857 N/A

1000 8849 N/A

1000 wide

720 high 900 high

720 high 900 high

720 high 900 high

WALL DISPLAY GLAZED DRESSER UNITS

With integral drawer

NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: 1212MM DRESSER UNITS TO SUIT 720MM HIGH WALL UNITS, 1392MM DRESSER UNITS TO SUIT 900MM HIGH WALL UNITS,


500 Lt Hd 8993 Lt Hd 8989

Rt Hd 8992 Rt Hd 8988

1212 high 1392 high

WALL DRESSER UNIT WORKTOP FILLET

NOTE: TO SUIT WALL DISPLAY DRESSER UNIT WHEN USING 28-30MM THICK SOLID SURFACE WORKTOPS.NOTE: 6091 - TO SUIT BOTH 500 AND 600MM WIDE UNITS.NOTE: 6093 - TO SUIT 1000MM WIDE UNITS.

SIZE CODE

TO SUIT 500 & 600MM 6091

TO SUIT 1000MM 6093


WALL UNIT GLASS SHELVES

To suit 316mm deep wall units - Optional extra

NOTE: SUPPLIED WITH GLASS SHELF CLIPS.NOTE: SHELF WIDTH ANNOTATED IS NOMINAL TO SUIT UNITS.NOTE: 800 AND 1000MM WALL DISPLAY BI-FOLDING UNITS CANNOT BE UPGRADED TO HAVE INTERNAL GLASS SHELVING.

WALL DISPLAY BI-FOLDING UNITS

With solid doors 2 X Doors, height 355mm

NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.

With ‘aluminium frame glazed’ doors 2 X Aluminium framed doors, height 355mm

NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.

With solid and ‘aluminium frame glazed’ doors 1 X Top door, height 355mm

1 X Aluminium framed bottom door, height 355mm

NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.NOTE: THE ALUMINIUM FRAME GLAZED DOOR IS ALWAYS SUPPLIED AT THE BOTTOM OF THE UNIT, BELOW THE SOLID DOOR.

WALL DISPLAY DRESSER TAMBOUR UNITS

NOTE: WHEN USING WITH 28/30MM SOLID SURFACES, YOU WILL NEED TO SPECIFY AN INFILL PANEL THE WIDTH OF THE UNIT X 339MM DEEP X 10MM THICK. THIS IS TO ALLOWALIGNMENT OF THE WALL, WALL DRESSER AND TALL UNITS.


500 8514 N/A

600 8515 N/A

WIDTH CODE

400 GLAS070B

500 GLAS071A

600 GLAS072A

800 GLAS073A

900 GLAS069A

1000 GLAS074A

WIDTH 720 HIGH

500 8555

600 8556

800 8558

1000 8560

500 8565

600 8566

800 8568

1000 8570

500 8575

600 8576

800 8578

1000 8580

720 high

720 high

720 high

1212 high


INTEGRATED EXTRACTOR HOOD

NOTE: 450MM HIGH TO SUIT 720MM WALL UNITS.NOTE: WHEN USING 900MM WALL UNITS, AN INTEGRATED EXTRACTOR HOOD INFILL PANEL MUST BE SPECIFIED (SEE BELOW).

INTEGRATED EXTRACTOR HOOD INFILL PANEL

NOTE: 175MM INFILL TO BE USED IN CONJUNCTION WITH INTEGRATED EXTRACTOR HOOD TO SUIT 900MM WALL UNITS.

TELESCOPIC COOKER HOOD

NOTE: THESE COOKER HOODS CAN NOT BE USED WITH GAS HOBS AS IT WILL BREACH CORGI REGULATIONS AND BS6172. ELECTRIC, CERAMIC AND INDUCTION HOBS ARE FINE.

NOTE: DESIGNED TO SUIT NEFF TELESCOPIC SENSOR HOODS MODELS D4692, 4672 & D4972 ONLY, NOTE: WHEN SPECIFYING MODEL D4972 FOR INSTALLATION INTO THE 900WIDE HOOD UNIT, YOU WILL NEED TO SPECIFY THE INSTALLATION KIT Z5420X0, AS THIS HOOD IS DESIGNED TO BE FITTED INTO A 600WIDE UNIT WITHOUT THE KIT OR 900 WIDEUNITS WITH THE KIT.

NOTE: INTERNAL WALL UNIT SHELVING IS REDUCED DEPTH TO ALLOW FOR EXTRACTOR MECHANISM; BEST SUITED FOR USE WITH SMALL SPICE JARS, ETC.

WIDTH 450 HIGH

600 CH700

WIDTH 175 HIGH

600 8168


600 Lt Hd 8164 N/A

Rt Hd 8165 N/A

900 8166 N/A

600 wide 900 wide

WALL SOIL & VENT PIPE INFILL SPICE RACK

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.


300 1522 N/A

720 high


636 X 636 6018 6023

WALL CORNER POST

NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER.


WALL UNIT INFILL PANELS

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.

WALL DRESSER UNIT INFILL PANELS

NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.

FEATURE UNIT: 28mm WINDOW SOFFIT PANELS

NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE.

WINDOW SOFFITS

Without pelmet

NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE.


150 8754 8930

300 8753 8931

400 8096 8097


150 8058 8059

300 8057 8060

400 8098 8099

DEPTH WIDTH CODE

339 1200 6533

1600 6537

2000 6541

2400 6545


DEPTH WIDTH CODE

316 1200 6312

1600 6316

2000 6320

2400 6324

720 high 900 high

1212 high 1392 high

16mm soffit panel

CHIMNEY HOOD SOFFITS FOR USE WITHOUT CORNICE

NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACESNOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES.

CHIMNEY HOOD SOFFITS FOR USE WITH CORNICE

NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACESNOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES.

DEPTH WIDTH CODE

316 to 416 850 6319

316 to 416 1250 6323

DEPTH WIDTH CODE

DEPTH WIDTH CODE

316 to 416 850 6318

316 to 416 1250 6322

16mm soffit panel with Angled front edges

16mm soffit panel with a curved front edge


STAINLESS STEEL PILASTERS

Manufactured from 50 x 100mm tubing.

VERTICAL BASE PENINSULAR PILASTER DECOR PANEL (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL SIZE: D 600 X W 16

VERTICAL BASE FORWARD PILASTER DECOR PANEL (Available in all Price Groups)


VERTICAL BASE PILASTER UNIT DECOR PANEL (Available in all Price Groups)


HEIGHT 16mm PANEL 28mm PANEL

900 8023 N/A


900 8028 N/A


900 8027 N/A

Decor panel style. Decor Panels are Range

Dependent;

They are manufactured from

either MFC panels, Foil Wrapped

panels all with a PVC edge.


Dependent;





Dependent;




HEIGHT SIZE CODE

870 50X100 FACM232A

720 50X100 FACM233A

900 50X100 FACM234A


VERTICAL BASE UNIT DECOR PANEL (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 591NOTE: PANEL DEPTH: D 641 TO SUIT 650 DEEP WORKTOPS

VERTICAL BASE INFILL DECOR PANEL (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 150

VERTICAL BASE PENINSULAR UNIT DECOR PANEL (Available in all Price Groups)


VERTICAL HIGHBOARD UNIT DECOR PANEL (Available in all Price Groups)


VERTICAL TALL UNIT DECOR PANEL (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR ‘16MM THICK SELECT’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2150MM HIGH, AND FOR 2300MM ARE PROVIDED 2330MM HIGH.NOTE: FOR ‘28MM THICK METRO’ RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM.NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM AREPROVIDED 2300MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM AREPROVIDED 2300MM HIGH.NOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM.NOTE: PANEL DEPTHS 641MM ARE PROVIDED FOR 650 SINK RUNS.

HEIGHT DEPTH 16mm PANEL 28mm PANEL

FOR 2120mm 591 8017 8254

TALL UNITS 641 8265 8266

FOR 2300mm 591 8067 8255

TALL UNITS 641 8267 8268

HEIGHT DEPTH 16mm PANEL 28mm PANEL

900 591 8022 8250

641 8263 8264


900 8037 8251


900 8024 8252


1430 8020 8253


Dependent;





Dependent;





Dependent;





Dependent;


either MFC panels, Foil

Wrapped panels all with a

PVC edge.


Dependent;




PVC edge.


VERTICAL WALL UNIT DECOR PANEL - 360mm WALL UNITS (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 360MM WALL UNITS ARE PROVIDED 400MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 360MMWALL UNITS ARE PROVIDED 360MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 360MM WALL UNITS ARE PROVIDED 418MM HIGH.NOTE: PANEL DEPTH: D 339

VERTICAL WALL UNIT DECOR PANEL - 720/900mm WALL UNITS (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALLOTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH.NOTE: PANEL DEPTH: D 339

VERTICAL WALL PENINSULAR UNIT DECOR PANEL - 720/900mm WALL UNITS (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALLOTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH.NOTE: PANEL DEPTH: D 362

VERTICAL WALL DRESSER UNIT DECOR PANEL (Available in all Price Groups)

NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGH.FOR ALL OTHER SELECT RANGES, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1241MM HIGH, AND FOR 1392MM ARE PROVIDED 1421MM HIGH.NOTE: PANEL DEPTH: D 339


FOR 360mm 8083 8256

WALL UNITS


FOR 720mm 8018 8257

WALL UNITS

FOR 900mm 8068 8258

WALL UNITS


FOR 720mm 8036 8261

WALL UNITS

FOR 900mm 8076 8262

WALL UNITS


FOR 1212mm 8019 8259

DRESSER UNITS

FOR 1392mm 8069 8260

DRESSER UNITS


Dependent;





Dependent;





Dependent;





Dependent;





DECOR PANEL SELF-ADHESIVE COVER CAPS

Self-Adhesive PVC cover caps:

For use when fitting Decor Panels to units, or to cover

the cam in the Wall Unit bottom panel.

VERTICAL VARIABLE SIZE DECOR PANEL (Available in all Price Groups)

NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH.NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING.

HORIZONTAL VARIABLE SIZE FRAMING PANEL (Available in all Price Groups)

NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH.NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING.


VARIABLE 9021 8298

COLOUR CODE

COLOUR CODE

WHITE PLAS267A

VANILLA PLAS265A

ALUMINIUM PLAS270A

GREY

OAK PLAS269A

BEECH PLAS266A

MAPLE PLAS262A

NATURAL AIDIA PLAS268A

WALNUT

FERRARA OAK PLAS261A


Dependent;




PVC edge.


Dependent;




DEPTH LENGTH 16mm PANEL 28mm PANEL

VARIABLE VARIABLE 8066 8299

339 600 8281 8231

800 8282 8232

1000 8283 8233

1200 8284 8234

1610 8285 8235

1810 8286 8236

2310 8287 8237

641 600 8291 8241

800 8292 8242

1000 8293 8243

1200 8294 8244

1610 8295 8245

1810 8296 8246

2310 8297 8247

PROTECTION PACKS

NOTE: IDEALLY TO BE FITTED EITHER SIDE F

CODES

6900 PROTECTION PACK

12 METRES OF BUBBLE WRAP 750 WIDE

12 METRES OF CORRUGATED CARDBOARD

2 POLY BAGS



12 METRES OF CORRUGATED CARDBOARD

20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm

10 LENGTHS OF NOMAFOAM U-CHANNEL

2 POLY BAGS



20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm

10 LENGTHS OF NOMAFOAM U-CHANNEL

2 POLY BAGS


enable

enable:

inclusively designed accessible kitchens: we believe it is the first range of its kind to equally meet the needs of house builders, housingassociations and end users.

Why enable?......because it means: ‘to make something possible’ or ‘ to provide somebody with the resources, authority or the opportunity to dosomething’.

enable offers you flexible height cupboards; internal storage systems for added functionality; multi hole brackets allowing simpleworktop level adjustment; internal cupboard/drawer lighting for the visually impaired. enable offers you accessible kitchens to meet allyour needs. The Manhattan enable range is the result of a consolidated research and development programme carried out by our productdevelopment team in West Sussex. Our research showed that kitchens designed for optimum accessibility should:

l offer a wide rang of choice, accommodating the design philosophy adopted in standard kitchen ranges;

l give a high degree of flexibility, ensuring the physical needs of different users are catered for equally;

l have excellent functionality, without sacrificing style;

l meet the specified standards for special needs users.


ENABLE: INTRODUCTION

Welcome to Manhattan’s enable range of units, our most comprehensive to date.This new range of units will be able to offer you plenty of exciting solutions when planning your kitchens. And remember, this is just theselection of ‘specialist’ units, everything you have seen so far in this comprehensive Specifier’s Guide can be used in your kitchens.

enable:

inclusively designed accessible kitchens

ENABLE: BASE DRAWER UNIT WITH ‘METAL-SIDED’ THREE-QUARTER OPENING DRAWER

Single drawer unit


450mm deep drawer, finished in white


ENABLE: BASE UNITS - REDUCED HEIGHT


Door height 570mm


Door height 570mm

WIDTH 568 DEEP

300 Lt Hd 2151

Rt Hd 2152

400 Lt Hd 2153

Rt Hd 2154

500 Lt Hd 4911

Rt Hd 4912

600 Lt Hd 4913

Rt Hd 4914

800 4918

1000 4920

WIDTH 568 DEEP

WIDTH CODE

400 2170

500 2171

600 2172

ENABLE: BASE DRAWER UNITS WITH ‘METAL-SIDED’ DRAWERS (CONTINUED)

Three drawer unit - comprising two drawers and one high-sided drawer





Four drawer unit - comprising four drawers




WIDTH CODE

500 2175

600 2176

300 2177

400 2178

500 2179

600 2180

ENABLE: BASE DRAWER UNIT WITH PULL-OUT TABLE SURFACE AND ‘METAL-SIDED’ DRAWERS

Three drawer unit - top drawer as pull-out tambour table/surface



1 X Pull-out drawer front with table, height 140mm


1 X Deep drawer front, height 283mm

WIDTH CODE

600 2181


ENABLE: KITCHEN ACCESSORY - CORNER UNIT BLANKING PANEL

Base corner unit blanking panel

NOTE: WHEN USING THE BLANKING PANEL, REMEMBER TO REMOVE THE S-FRAME AND FILLET TO ENSURE THAT THE KITCHEN IS PLANNED ON A 600MM CORNER MODULE.NOTE: PANEL TO BE CUT-ON-SITE TO SUIT BASE CORNER UNIT ADJUSTMENT.NOTE: REGARDLESS OF DOOR COLOUR, THIS PANEL WILL BE MANUFACTURED TO SUIT THE CARCASE COLOUR OF THE UNITS ORDERED.

ENABLE: KITCHEN ACCESSORY - PELMET

Worktop blanking pelmet

NOTE: TO BE SPECIFIED WHERE A RUN OF WORKTOP IS BEING USED TO ALLOW DISABLED ACCESS TO SINK OR HOB AREA. THE PELMET WILL ALLOW THE WORKTOP SUPPORTBRACKETS TO BE HIDDEN FROM THE VIEW OF THE USER.

WIDTH 568 DEEP

SIZE CODE

678 X 570 6196

678 X 715 6197

WIDTH LENGTH CODE

140 MAX 2300 6195

ENABLE: BASE CORNER UNITS - REDUCED HEIGHT


Door height 570mm

*

NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. BASEDRAWER UNIT - RED

WIDTH CODE

600 Lt Hd 2185

(min 336-378) Rt Hd 2186

800 Lt Hd 2187

(min 236-278) Rt Hd 2188

1000 Lt Hd 2189

(min 136-178) Rt Hd 2190

*800 Lt Hd 2191

(min 336-378) Rt Hd 2192

*1000 Lt Hd 2193

(min 236-278) Rt Hd 2194

600mm WIDE UNIT

(300mm Wide door)

800mm WIDE UNIT

(400mm Wide door)

1000mm WIDE UNIT

(500mm Wide door)

*800mm WIDE UNIT

(500mm Wide door)

*1000mm WIDE UNIT

(600mm Wide door)

ENABLE: KITCHEN ACCESSORY - HALF CIRCLE, FULL EXTENSION CAROUSELS

Carousels for use in corner units

NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT.NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM.

SIZE CODE

000 X 000 MECH100A


ENABLE: HIGHBOARD HOUSING UNITS - 1400MM HIGH

To suit an integrated single oven

Unit height 1400mm


Open shelf, variable depending on oven size

Aperture 650mm

Bottom pan drawer height 355mm

To suit an integrated double oven

Unit height 1400mm


Infill panel to suit (fitted at top of unit)

Aperture 889mm


To suit an integrated refrigerator or freezer

Unit height 1400mm


Aperture 889mm

Door height 895mm

Infill panel 57mm


(Any infill to be fitted internally behind door)

WIDTH 568 DEEP

600 2950

600 4805

600 Lt Hd 4813

Rt Hd 4814

ENABLE: MOBILE TROLLEY UNIT

Mobile trolley unit with cutlery drawer and locking castor’s

CODE

CODEH HEIGHT CODE

2150


ENABLE: TALL HOUSING UNITS


Unit height 2120mm


Top, lift-up door 355mm


Aperture 650mm


To suit a single oven and microwave

Unit height 2120mm




Top aperture 450mm

Bottom aperture 650mm


To suit a double oven

Unit height 2120mm




Aperture 884mm



Unit height 2120mm



Open shelf 335mm

Door height 895mm



WIDTH 568 DEEP

600 3750

600 3751

600 3752

600 Lt Hd 3753

Rt Hd 3754


ENABLE: TALL HOUSING UNITS with UPGRADED TOP DOOR STAY


Unit height 2120mm




Aperture 650mm


To suit a single oven and microwave

Unit height 2120mm




Top aperture 450mm

Bottom aperture 650mm


To suit a double oven

Unit height 2120mm




Aperture 884mm



Unit height 2120mm



Open shelf 335mm

Door height 895mm



WIDTH 568 DEEP

600 3760

600 3761

600 3762

600 Lt Hd 3763

Rt Hd 3764


ENABLE: WALL UNIT


With full-height doors

WIDTH 720 HIGH

300 Lt Hd 8523

Rt Hd 8524

400 Lt Hd 8525

Rt Hd 8526

450 Lt Hd 8527

Rt Hd 8528

500 Lt Hd 8529

Rt Hd 8530

600 Lt Hd 8531

Rt Hd 8532

800 8533

900 8534

1000 8535

720 high

720 high


ENABLE: KITCHEN ACCESSORY - WORKTOP SUPPORT ARM

Support arm for use under a span of worktop, with no units under

NOTE: SUPPLY TWO BRACKETS FOR WORKTOP SPANS UP TO 600MM WIDE, AND THREE BRACKETS FOR WORKTOP SPANS OVER 1200MM WIDE.NOTE: MINIMUM WORKTOP HEIGHT OF 695MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 870MM (TO UNDERSIDE).

ENABLE: KITCHEN ACCESSORY - BASE UNIT SUPPORT ARM

Support arm for use under enable base units, with worktop over

NOTE: SUPPLY TWO BRACKETS FOR UNITS UP TO 600MM WIDE, AND THREE BRACKETS FOR UNITS 800MM AND OVER.NOTE: MINIMUM WORKTOP HEIGHT OF 745MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 1070MM (TO UNDERSIDE).

ENABLE: KITCHEN ACCESSORY - ‘POWER LIFT’ WORKTOP MECHANISM

Electronic worktop movement mechanism, used for manoeuvring sink/hob surfaces

NOTE: WHEN BASE UNITS ARE FITTED AT A LOWER HEIGHT NEXT TO A POWERED LIFT, AN ‘ANTI-ENTRAPMENT’ SENSOR SWITCH MUST BE FITTED TO THE UNDERSIDE OF THEWORKTOP’S METAL SUPPORT FRAME.NOTE: WORKTOPS FITTED NEXT TO THE POWER LIFT MUST FINISH FLUSH WITH THE UNIT END PANEL OR FLY END PANEL.NOTE: TO REACH ANY ADJACENT BASE UNITS, THE LENGTH OF CABLES/WIRES WILL NEED TO HAVE THE LENGTH SPECIFIED.NOTE: REMEMBER TO SPECIFY THE ‘ANTI-ENTRAPMENT STRIP MECH071A - (SEE RIGHT)

SIZE CODE

500 X 410 MECH101A

SIZE CODE

500 X 410 MECH102A

SIZE CODE

1000 X 600 MECH069A

ANTI-ENTRAPMENT STRIP CODE

MECH071A

WORKTOP

PELMET

GUIDE RAILPOWER LIFT

ELECTRONIC CONTROL

POWER

SWITCH

TRANSFORMER

MOTOR

WALL FIXINGBRACKET

WALL FIXING BRACKET& SUPPORT ARM

WALL

FLOOR LEVEL

WORKTOP WALL FIXING BRACKET& SUPPORT ARM

WALL

FLOOR LEVEL

WORKTOP


WALL

UNIT

UNIT

FLOOR LEVEL

WORKTOP


WALL

FLOOR LEVEL

WORKTOP


ACCESSORIES


CODE

*White

FACM060A

**Silver

FACM082B

**Gold

FACM083A

**White

FACM084A

CORNICEStyle, material and finish specific to individual range.

Style, material and finish specific to

individual range.

Range M11 & R07 only

CODE

2.3 meters

6061

LIGHT FASCIA

Style, material and finish specific to

individual range.

Range M11 & R07 only

CODE

2.3 meters

6065

BREAKFAST BAR LEGS - 895MM HIGH

895mm x 25mm diameter chrome

plated steel tube with sockets.

CODE

Chrome

LEGS036A


870mm x 60mm diameter, adjustable

height leg.

CODE

White

LEGS032A

S/Steel

LEGS035A

Oak

LEGS031A

CONTINUOUS PLINTH - 150MM HIGH

Colour specific to individual

range, supplied in 2.5m lengths

Optional extra,

manufactured from MFC, supplied in

2.5m lengths

Optional extra,

manufactured from MFC,supplied in

2.5m lengths

CODE

Range

specific

6094

Aluminium

effect

6083

White High

Gloss

6087

RETURN PLINTH - 175MM HIGH

Colour specific to individual

range.

Optional extra,

manufactured from MFC.

Optional extra,

manufactured from MFC.

CODE

Range

specific

6095

Aluminium

effect

6085

White High

Gloss

6088


710mm x 60mm diameter, adjustable

height leg.

CODE

White

LEGS030A

S/Steel

LEGS034A

Oak

LEGS033A

STAINLESS STEEL PILASTERS

Manufactured from 50 x 100mm

tubing.

CODE

870mm

FACM232A

720mm

FACM233A

900mm

FACM234A

PLINTH SEALER

Transparent plastic extrusion which

clips to the bottom edge of the plinth.

The flexible lip then seals the gap

between the floor and the plinth.

NOTE: SUPPLIED IN 3M LENGTHS, CUT ON SITE TO SUITREQUIREMENTS.

CODE

PLAS250A

HALF SWING-OUT WIRE BASKETS

For use in a base corner units 2663/64

2627/28 & 2189/90 only.

NOTE: SUPPLIED AS A PAIR.

CODE

MECH001A

8 mm THICK WORKTOP UPSTANDS

For positioning directly above the worktop

The size 100mm high x 3000mm MAX long

CODE

9199

DECOR PANEL SELF-ADHESIVE COVER CAPS

WHITE

VANILLA

ALUMINIUM GREY

OAK

BEECH

MAPLE

NATURAL AIDIA WALNUT

FERRARA OAK

CODE

PLAS267A

PLAS265A

PLAS270A

PLAS269A

PLAS266A

PLAS262A

PLAS268A

PLAS261A

PLINTH AND WORKTOP VENTILATION GRILLS

To be fitted into a housing unit plinth or

fitted into a worktop over a highboard

housing unit.

NOTE: * MANUFACTURED FROM PLASTIC.

NOTE: ** MANUFACTURED FROM ALUMINIUM, AND THENSPRAYED THE APPROPRIATE COLOUR.


CODE

175 deg

HINGE OPTION TWO

DOUBLE POSTFORMED WORKTOPS

NOTE: 3.6M MAXIMUM LENGTH

38MM

Depth

670mm.

9088

Depth

900mm.

9089

2MM ACRYLIC EDGED WORKTOPS

2mm Acrylic edged laminate worktop,

acrylic edging available in:

- Aluminium Wave

- Beech multiplex

- Beech/Steel multiplex

- Walnut/Steel multiplex

- Planked Cherry


CODE

Depth up

to 850mm.

9120

SQUARE EDGED WORKTOPS

38mm Square edged laminate worktop


CODE

Depth up

to 850mm.

9061

HINGE OPTION THREE CODE

107 deg

WORKTOP CONNECTOR BOLTS

Each joint consists of a three butterfly

bolts to be recessed into the worktop

CODE

FACM009A

CABLE MANAGMENT FOR LIGHTING - SELF ADHESIVE BASE

To be used in conjunction with cable ties

.

CODE

FITT091A

HINGE OPTION FOUR CODE

107 deg

Soft Close

HINGE OPTION FIVE CODE

175 deg

Soft Close

CABLE MANAGMENT FOR LIGHTING - CABLE TIE

To be used in conjunction with Self-

Adhesive bases

.

CODE

FITT090A

SOFT CLOSING DOORS - UPGRAGE OPTIONAvailable with to suit

Available with to suit all base, wall, highboard and tall units as

an optional upgrade

NOTE: NOT SUITABLE FOR BI-FOLD WALL UNITS OR WITH 170 DEGREE HINGES

CODE

HING064A

TIMBER BATTENS

50 x 50 x 2400mm timber batten for

supporting 650mm deep of Granite

worktops.

20 x 50 x 2400mm timber batten for

supporting worktops over appliance

spaces, soffit panels or infill panels.

CODE

50x50x2400

TIMB020A

20x50x2400

TIMB021A

SINGLE POSTFORMED WORKTOPS

38mm & 60mm Single postformed laminate worktop


38MM

Depth up

to 600mm.

9086

Depth 601-

850mm.

9087

SOFT CLOSING DRAWERS - UPGRAGE OPTION

DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION

Available as un upgrade option to all base and tall units

NOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE

CODE

MECH126A

BATHROOMSPECIFIER’S GUIDEJUNE 2009

By appointment to Her Majesty The Queen

Manufacturers and Installers ofKitchen and Bathroom Furniture

Manhattan Furniture West Sussex


87

6m

m

57

6m

m

19

74

mm

20

28

mm

84

5m

m

30

0m

m

53

8m

m

38

mm

57

6m

m

87

6m

m

57

6m

m

84

5m

m

19

74

mm

20

28

mm

30

0m

m

11

52

mm

GENERAL DIMENSIONS (F0R 575mm HIGH WALL UNITS WITH 876mm BASE UNITS & 1974mm TALL UNITS

CODING GUIDELINES

Most single door cabinets have left or right hand opening doors and it is therefore essential to quote the correct type when ordering. A door with hinges to the left

hand side as you are facing the cabinet is a left hand unit, a door with the hinges to the right hand side is a right hand unit.

If an open end display unit is specified on the right hand end of a run of base or wall units, please specify a right hand unit. Likewise, if it is specified on the left at the

end of a run of base or wall units, please specify a left hand unit.

Similarly, all base and base sink corner cabinets can be left or right handed. If the blanking panel is to the left when facing the cabinet, please specify a left hand

model; if the blanking panel is to the right, please specify a right hand unit.

Base sink cabinets can also be left or right handed. If the draining board is to be fitted to the left of the unit, please specify a left hand model; if the draining board is

to be fitted to the right, please specify a right hand model.

Height = from top to bottom Width = from left to right Depth = from back to front

SIDE ELEVATION of WALL AND BASE UNITS SIDE ELEVATION OF BASE WITH TALL UNIT ADDED

TO THE TOP OF THE BASE UNIT

LH WALL UNIT DOOR RH WALL UNIT DOOR

LH BASE UNIT DOOR RH BASE UNIT DOOR

LH BASE UNIT DOOR RH BASE UNIT DOOR

LH WALL UNIT DOOR RH WALL UNIT DOOR


SINGLE DOOR CORNER BASE UNIT

THREE DRAWER BASE UNIT

DEPTH WIDTH CODE

280 600 LH 3351

280 600 RH 3352

DEPTH WIDTH CODE

280 300 3361

280 400 3362

WIDTH 300 DEEP

Door height 572mm

Minimum start point from the corner 25mm

Maximum start point from the corner 225mm

The width of unit with S’Frame =

With front strip set in the vertical position 345mm

With the front strip set in the horizontal position 314mm

Height of drawer fronts 188mm

OPEN SHELF BASE UNITS

SINGLE DOOR BASE UNIT

DOUBLE DOOR BASE UNIT

OPEN SHELF BASE CORNER UNIT

DEPTH WIDTH CODE

280 150 3339

280 300 3340

WIDTH CODE

DEPTH WIDTH 568 DEEP

280 300 LH 3341

280 300 RH 3342

280 400 LH 3343

280 400 RH 3344

DEPTH WIDTH CODE

280 600 3345

280 800 3346

WIDTH 568 DEEP

DEPTH WIDTH CODE

280 600 LH 3347

280 600 RH 3348

WIDTH 280 DEEP

MATERIAL CODE

Minimum start point from the corner 25mm

Maximum start point from the corner 225mm

The width of unit with S’Frame =

With front strip set in the vertical position 345mm

With the front strip set in the horizontal position 314mm

Door height 572mm

Door height 572mm


COMBINED BIDET AND WC BASE UNIT

VANITY SINK BASE UNIT

DEPTH WIDTH CODE

280 1200 LH 3375

280 1200 RH 3376

280 1600 LH 3377

280 1600 RH 3378

DEPTH WIDTH CODE

529 600 3379

529 800 3380

WIDTH 300 D

Bidet bottom panel height 188mm

WC panel: The removable top panel height 380mm

Bottom fixed panel height 188mm

Note: The 1200mm wide wc unit has been designed to be

fitted with a bottom supply and overflow type Cistern, this

will need to be specified.

Door height 572mm

BASE SINK UNITS

BASE WC UNITS

BASE BIDET UNIT WITH OPEN SHELF

COMBINED WC AND SINK BASE UNIT

DEPTH WIDTH CODE

280 600 3363

280 800 3364

DEPTH WIDTH CODE

DEPTH WIDTH 568 DEEP

280 600 3365

280 800 3366

DEPTH WIDTH CODE

280 600 3367

280 800 3368

DEPTH WIDTH CODE

280 1200 LH 3371

280 1200 RH 3372

280 1600 LH 3373

280 1600 RH 3374

MATERIAL CODE

Sink panel height 188mm

Door height 380mm

Removable top panel height 380mm


Note: The 600mm wide wc unit has been designed to be fitted

with a bottom supply and overflow type Cistern, this will need to

be specified.


Note: Access to the plumbing is by removing the shelf.

Sink panel height 188mm

Door height 380mm

WC panel: The removable top panel height 380mm


Note: The 1200mm wide wc unit has been designed to be

fitted with a bottom supply and overflow type Cistern, this will

need to be specified.


BASE CORNER POST

BASE CORNER FILLET

DEPTH WIDTH CODE

65 65 6250

HEIGHT CODE

576 6268

32mm BATH BULKHEAD

BATH BULKHEAD INFILL & DECOR PANEL KIT

BASE INFILL PANEL

BASE DECOR PANEL

DEPTH WIDTH CODE

301 to 303 32 8204

WIDTH 280 DEEP

DEPTH WIDTH CODE

301 to 303 66 min 150 max 8205

DEPTH WIDTH CODE

16 to 18 150 8206

16 to 18 300 8207

DEPTH WIDTH CODE

301 to 303 16 8208

This bulkhead fits between the side of the bath and the adjacent

base unit.

The bulkhead is 876mm high and fits between the floor and the

under side of the worktop.

Note: check that the bath panel will not protrude further than

the bulkhead, if so then an 8205 should be specified

This bulkhead fits between the side of the bath and the

adjacent base unit.

The bulkhead is 876mm high and fits between the floor and the

under side of the worktop.

Note: this bulkhead is adjustable by reducing the width of the

front infill panel, this can be cut down on site by a fitter

Height 576mm

Note: to be fixed in-line with the front edge of the

carcase

Height 576mm

Height 576mm

Height 576mm

Note: for use when a base unit is set

against a 45 degree false wall


BASE UNIT PEDESTAL INFILL

BASE UNIT ADJUSTABLE LEG

DEPTH WIDTH CODE

32 to 38 400 8209

HEIGHT CODE

300 6800

BASE UNIT PLINTH

BASE UNIT PLINTH RETURN

VANITY PLINTH RETURN

PLINTH SEAL

DEPTH WIDTH CODE

16 1200 long 6251

16 2400 long 6252

DEPTH WIDTH CODE

16 275 6269

DEPTH WIDTH CODE

16 524 6270

DEPTH WIDTH CODE

16 3000 long 8145

Note: depending on the range this infill can be 32 to 38mm deep x 400mm wide x 300mm high.

Note: Order two legs per unit for unit width 150mm300mm400mm600mm800mmOrder three legs per unit for unit width 1200mm1600mm

Note: Plinth seal made from transparent uPVC


DEPTH WIDTH CODE

16 to 18 201-203 8203

OPEN SHELF WALL UNIT

SINGLE DOOR WALL UNIT

DOUBLEDOOR WALL UNIT

WALL UNIT INFILL PANEL

DEPTH WIDTH CODE

180 150 3221

180 300 3222

DEPTH WIDTH CODE

180 300 3223

180 300 3224

180 400 3225

180 400 3226

DEPTH WIDTH CODE

180 600 3227

180 800 3228

DEPTH WIDTH CODE

16 to 18 150 8201

16 to 18 300 8202


DEPTH WIDTH CODE

280 300 3415

280 300 3416

280 400 3417

280 400 3418

MATERIAL CODE

DEPTH WIDTH CODE

280 300 3411

280 300 3412

280 400 3413

280 400 3414

DEPTH WIDTH CODE

16 to 18 150 8212

16 to 18 300 8213

WIDTH CODE

16 301 to 303 8214

Door height 1148mm

Door height 572mm

Height 1728mmNote: to be fixed adjacent to the baseand tall unit and inline with the frontedge of the carcase

Height 2028mmNote: This has been designed to fit onthe end of a run of tall units betweenthe floor and the top of the tall unit

TALL UNIT WITH FULL LENGTH DOOR

TALL UNIT WITH SHORT DOOR AND OPEN SHELF

TALL UNIT INFILL

TALL UNIT DECOR PANEL

DETAIL SHOWING HOW THE TALL UNIT WORKS WITH BASE UNITS , INFILLS & DECOR PANELS

Tall unit

Base unit

Plinth

Combined units making

the Tall unit

Decor

panel

Plinth

Infill

panel

Combined tall

units


LENGTH CODE

Cornice 1500 6253

Cornice 3000 6254

Light Fascia 1500 6255

Light Fascia 3000 6256

FRONT BATH PANEL

SIDE BATH PANEL

WALL UNIT SOFFIT PANEL

38mm POSTFORMED LAMINATE WORKTOP

Note: Front bath panel kit includes:

Front bath panel

Plinth

Side infill supports, Two per kit

Screw pack.

Note: Side bath panel kit includes:

Side bath panel

Plinth

Side infill supports, One per kit

Corner post, One per kit

Panel location battens, Three per kit

Screw pack.

CORNICE AND LIGHT FASCIA

SIZE CODE

Size to be specified 8210

SIZE CODE

Size to be specified 8211

DEPTH WIDTH CODE

180 800 6257

180 1200 6258

180 1600 6259

180 2000 6260

DEPTH LENGTH CODE

305 3600 9027

Note: The standard depth of

bathroom

worktop is 305mm with the depth of

the Vanity sink worktop set at

554mm deep.

MANHATTAN SPECIFIER’S GUIDE54 MANHATTAN SPECIFIER’S GUIDE54

DETAIL SHOWING A 32mm BATH BULKHEAD FITTED ADJACENT TO A BATH

DETAIL SHOWING A BATH BULKHEAD INFILL & DECOR PANEL KIT FITTED ADJACENT TO A BATH

CALCULATING THE WORKTOP ADJACENT TO A WC INSPECTION FLAP

To calculate the worktop adjacent to the 600mm wide WC

unit inspection flap.

Take the unit length of 300mm.

Add 6mm for the over hang.

Add 52mm overhang to continue the worktop over the WC

unit so that it meets with the inspection flap.

Length of worktop 358mm

To calculate the worktop adjacent to the 800mm wide WC

unit inspection flap.

Take the unit length of 300mm.

Add 6mm for the over hang.

Add 132mm overhang to continue the worktop over the

WC unit so that it meets with the inspection flap.

Length of worktop 438mm

Note: To support the flap and prevent misalignment the WC unit will be supplied 25mm

dia support discs to be attached to the underside worktops adjacent to the flap.

32mm bath bulkhead 8214

fitted adjacent to a sink unit and

bath

32mm bath bulkhead 8214

fitted adjacent to a WC unit and

bath

Bath bulkhead & infill 8205

fitted adjacent to a sink unit

and bath

Detail showing the parts that make up the

bath bulkhead & infill kit 8205

SPECIFIER’S GUIDEJUNE 2009

MANHATTAN FURNITUREBLENHEIM ROADLANCING BUSINESS PARKLANCINGWEST SUSSEXBN15 8UH

TEL:FAX:EMAIL:WEB:

01903 52430001903 [email protected]

Documents

Full Specifiers guide (Issue 06/09)