Embed Size (px)
Citation preview
Laboratory Planning Guide
• CASEWORK/FURNITURE • COUNTERTOPS/ WORKSURFACES
• FUME HOODS/VENTILATION SYSTEMS
• SAFETY EQUIPMENT S C I E N T I F I C
E Q U I P M E N T & F U R N I T U R E
A S S O C I A T I O N
M E M B E R
For more information on HEMCO Laboratory Equipment visit our website: www.HEMCOcorp.com
HEMCO offers a complete line of furniture, countertops and fume hoods to equip your laboratory. Our professional staff will work with you to design a layout that is functional, ergonomic, flexible and most of all, meets your process and safety requirements.
We specialize in individual small lab projects. Your laboratory is personally engineered and expedited to meet your time and budget schedules.
Our services can include a complete turnkey installation to ensure the one source quality standards that you expect and deserve. HEMCO would welcome the opportunity to work with you from your concept planning to a completed operational laboratory.
1
ORDERING AND GENERAL INFORMATION ORDERING: Fax orders……………………………… (816) 796-3333 Anytime E-Mail orders…………………………. [email protected] Anytime Phone………………………………………. (816) 796-2900 Business Hours…………………….. 8:00 A.M. to 5:00 P.M. Central Standard Time
PRICES: F.O.B. Factory - Independence, MO and subject to change without notice.
TERMS: Payment to HEMCO Corporation for purchase and shipping charges can be made by Master Card, VISA, American Express, company check, certified check, Money order, letter of credit or wire transfer. For companies with credit established, our terms are 30 days. All purchases are subject to our standard terms and conditions.
NORMAL DELIVERY: Every effort will be made to process your order expediently and meet your desired schedule. We strive to ship our most popular equipment from stock. Please call for specific delivery schedule.
SPECIALIST IN COMPLETE LAB PROJECTS
29"
Length
Unitized design incorporates our most popular casework groupings to meet your laboratory needs. Standard construction is welded steel with baked-on chemical resistant finish. Quick shipping on Silver Beige only or other colors available.
UNILINE CASEWORK GROUPING
UNILINE Atlantis Grouping features (1) sink base cabinet, (1) 5 drawer cabinet and (1) combination two drawer, two door cabinet. Work surface is black phenolic, 1" thick x 30" deep with applied 4" backsplash. Assembly includes: (1) Hot/Cold gooseneck; (1) drop-in polypro sink, 16" x 16" x 8" with overflow and outlet; (2) keycocks (specify service); (1) duplex electrical pedestal outlet.
2 3
1 2
3 4 5
1 2
3
1 2
3 4
5
29" Length
Length
29"
1
2
Length
UNILINE Endeavour Island Grouping includes (1) end sink base cabinet and two groupings back to back. Each side features (2) combination four drawer, one door cabinet and (1) four drawer cabinet. Work surface is black phenolic 1" thick. Assembly includes (1) epoxy resin drop-in polypro sink 16" x 16" x 8" d (1) hot/cold gooseneck faucet, (4) double keycocks (specify service) and (2) double face duplex electrical pedestal outlets.
LENGTH 1 2 3 4 5 Cat. No. 9'10" 3'0" 2'0" 3'0" 1'10" 4'6" 70301
CABINETS
UNILINE Enterprise Grouping provides a versatile balance of storage and work space with (2) wall cabinets with sliding glass doors; (1) sink cabinets; (2) combination cabinets with 1 door and 4 drawers. Worksurface is black phenolic. 1" thick x 30" deep with applied 4" backsplash. Assembly includes: (1) Hot/Cold gooseneck, (1) drop-in polypro sink, 16" x 16" x 8" d; (1) resin pegboard, 24" x 30" ; (2) keycocks (specify service); (2) duplex electrical pedestal outlets
LENGTH 1 2 3 Cat. No. 9'10" 3'0" 3'0" 3'0" 70201
CABINETS
10'0" 3'0" 4'0" 3'0" 70202 12'0" 4'0" 4'0" 4'0" 70203
LENGTH 1 2 3 Cat. No. 9'0" 3'0" 3'0" 3'0" 70001
CABINETS
10' 0" 3'0" 4'0" 3'0" 70002 12' 0" 4'0" 4'0" 4'0" 70003
UNILINE Discovery Grouping features a stand up work area and sit down deck on end. Includes (1) sink cabinet; (1) combination two drawer, two door cabinet, (1) six drawer cabinet and the convenience of an end desk with organizational and file space. Worksurface is black phenolic, 1" thick x 30" deep with applied 4" backsplash. Assembly includes: (1) Hot/Cold gooseneck; (1) drop-in polypro sink 16" x 16" x 8" d with overflow and outlet; (1) resin pegboard, 24" 30" ; (2) keycocks (specify service) and; (1) duplex electrical pedestal outlet.
LENGTH 1 2 3 4 5 Cat. No. 13' 6" 3'0" 3'0" 3'0" 3'0" 1'6" 70101
CABINETS
14' 6" 3'0" 4'0" 3'0" 3'0" 1'6" 70102 16' 6" 4'0" 4'0" 4'0" 3'0" 1'6" 70103
ATLANTIS Grouping
DISCOVERY Grouping
ENTERPRISE Grouping
ENDEAVOUR Island Grouping
UNILINE BASE CABINETS Unitized modular design allows you to create a custom laboratory to meet your specific needs. All welded steel construction with chemical resistant coating. Quick shipping on Silver Beige only or other colors available.
W Cat. No. 18 71221 24 71222
W Cat. No. 18 71951 24 71952
Specify right or left hinged
W Cat. No. 30 71381 36 71382 42 71383 48 71384
SINK UNIT W Cat. No. 30 71811 36 71812 48 71814
SINK END UNIT W Cat. No. 52 71861
DEAD CORNER W Cat. No. 48 71983
Specify L.H. or R.H.
W Cat. No. 30 71211 36 71212 42 71213 48 71214
W Cat. No. 30 71231 36 71232 42 71233 48 71234
W Cat. No. 18 71321 24 71322
Specify right or left hinged
ACID CABINET W Cat. No. 30 75300 36 75030 48 75040
W Cat. No. 30 71061 36 71062 42 71063 48 71064
W Cat. No 30 71131 36 71132 42 71133
W Cat. No. 30 71141 36 71142 42 71143 48 71144
W Cat. No. 30 71081 36 71082 42 71083 48 71084
W Cat. No. 30 71031 36 71032 48 71034
3
W Cat. No. 18 71181 24 71182
FLAMMABLE W Cat. No. 30 78300 36 78030 48 78040
W Cat. No. 30 71241 36 71242 42 71243 48 71244
W Cat. No. 30 71391 36 71392 42 71393 48 71394
W Cat. No. 30 71051 36 71052 42 71053 48 71054
BASE CABINETS (STANDING HEIGHT IS 35 INCHES, DEPTH IS 22 INCHES)
W Cat. No. 18 72171 24 72172
*Specify L.H. or R.H.
W H Cat. No. 36 30 72032 48 30 72034
W H Cat. No. 36 30 72062 48 30 72064
W H Cat. No. 36 30 72192 48 30 72194
W Cat. No. 30 73513 36 73514 42 73515 48 73516
W Cat. No. 30 73531 36 73532 42 73533 48 73534
FLAMMABLE CABINET Meets NFPA code 30 and OSHA standards. Welded double-wall construction with 3-point lock system and leveler feet. Standard 2" leak proof sill. Units come with manual (M) doors. Color: Yellow
• OPEN FRONT STORAGE UNIT
• FIVE ADJUSTABLE SHELVES
• SWING DOOR STORAGE UNIT
• FIVE ADJUSTABLE SHELVES
• GLASS DOOR STORAGE UNIT
• GLAZED GLASS DOOR
• FIVE ADJUSTABLE SHELVES
REAR END FILLER PANEL
H W Cat. No. 35 7 74112
CENTER FILLER PANEL FRONT FILLER PANEL
H W Cat. No. 35 7 74122
FRONT RAIL 4" High
Width Cat. No 36" 74014 48" 74017
ONE DRAWER APRON 28" Deep
Width Cat No. 30 74032 36 74033
LEG ASSEMBLY 28" Deep
H Cat. No. 29" 73351 35" 73352
CORNER SCRIBE FILLER PANEL
FLUSH END SUPPORT 28" Deep
H Cat. No. 29" 73251 35" 73252
W H Cat. No. 6" 35 74001
W Cat. No. 30 73541 36 73542 42 73543 48 73544
H Cat. No. 35 74002
END SCRIBE
4
WALL CABINETS, SPECIAL CABINETS AND ACCESSORIES
Description Size (WxDxH) Cat. No.
18 gal., 2 dr. M 24x18x24 75802
30 gal., 4 dr. M 36x24x46 75706
45 gal., 4 dr. SC 43x18x65 75705
45 gal., 2 dr. M 34x34x67 75708
Description Size (WxDxH) Cat. No.
12 gal., 1 dr. M 24x18x35 75712
30 gal., 2 dr. M 36x24x35 75732
45 gal., 2 dr. M 43x18x65 75450
60 gal., 2 dr. M 34x34x65 75602
H W Cat. No. 35 per order 74142
ACID STORAGE CABINET Welded steel double-wall construction with polyethylene "spill catcher" trays built into the shelves and floors, chemical resistant enamel coating, leveler feet and leak proof sill. Cabinets are 43" wide and 18" deep. Units available with (M) Manual or (SC) Self Closing Doors. Color: Blue
WALL CABINETS (DEPTH 13" HEIGHT 32")
TALL STORAGE CABINETS (DEPTH 18" HEIGHT 84")
FILLER PANELS
ACID AND FLAMMABLE CABINETS
POLYOLEFIN OVERFLOW Beehive overflows are made of polyolefin and are used to prevent water from overflowing the sink. 6” Height Available in 1 1/2' IPS tailpiece.
ROUND CUP SINK Drop-in cup sink available in Epoxy or polyolefin. 1 1/2" IPS tailpiece includes strainer
POLYOLEFIN JAR P TRAP P Trap includes adjustable tailpiece removable jar. 1 1/2" IPS tailpiece
Cat. No. 40220
Countertops are 30" deep and can be supplied with or without backsplashes. Sink and service cutouts are fabricated as required.
NEUTRALIZATION TANK Molded of one piece chemical resistant polyolefin, neutralization tanks are designed to dilute and neutralize laboratory waste and concentrated corrosives. Limestone is utilized as the medium for neutralizing the hazardous waste. Size: 11" dia. X 16 1/4" H ID with 1 1/2" IPS inlet and outlet Cat. No.40222 50 lbs bag of replacement limestone Cat. No.40223
LABORATORY COUNTERTOPS, SINKS AND PLUMBING
OVAL CUP SINK Drop-in cup sink available in Polyolefin. 1 1/2" IPS tailpiece includes strainer.
Cat. No. 40069
POLYOLEFIN OR EPOXY SINKS Chemical resistant sinks are molded with integral flange allowing drop-in mounting. Sinks include 1 1/2" IPS treaded outlet. Please specify location in countertop layout of A and B dimensions.
• EPOXY RESIN - Surfaces and curbs are molded of a modified epoxy resin, that is specifically compounded and cured to provide optimum physical and chemical resistance. Surfaces are non-porous, non-conductive, stain and heat resistant. Available in 1" thickness. Color-Black
Cat. No. 70015B with 4" backsplash Cat. No. 70015 without backsplash
• PLASTIC LAMINATE - Surfaces are constructed of .050 high pressure chemical resistant plastic laminate that is chemically bonded to layers of premium grade particle board. Edges are finished. Laminate is in matte non-glare finish. Available in 1" thickness. Color-Black, White, Gray
Cat. No. 70017B with 4" backsplash Cat. No. 70017 without backsplash
• PHENOLIC RESIN - Surfaces are constructed of solid composite panels that have excellent chemical resistance and durability. Surfaces are UV, heat and bacteria resistant, non-porous and scratch resistant. Available in 1" thickness. Color-Charcoal
Cat. No. 70018B with 4" backsplash Cat. No. 70018 without backsplash
EPOXY RESIN PEGBOARDS for drying and storage of lab ware. Pegboard is 3/4" thick and includes a stainless steel drip trough to collect run-off.
A B
D
5
POLYOLEFIN SINKS A B Depth Cat. No.
12" 8" 8" 72041 18" 15" 12" 72045 14" 10" 6" 72043 28" 20" 9" 72048
EPOXY RESIN SINKS A B Depth Cat. No. 9" 6" 6" 42021
16" 12" 8" 42022 18" 15" 11" 42026 24" 16" 8" 42027
TYPE Size Cat. No. Epoxy Resin 6" 40218 Polyolefin 6" 40118
TYPE Size Cat. No. Polyolefin 3"x 6" 40119 Polyolefin 3"x 9" 40121
W H Cat. No. 24" 30" 72430 30" 30" 73030 36" 30" 73636
No. of Pegs 39 46 60
COUNTERTOPS
SINKS AND PLUMBING
Single outlet including turret and shank connection. 3/8" NPT
Cat. No. 50014
Single gang Single face Duplex\125v\15a Cat. No. 50131S
Single gang Single face Single\250v\20a Cat. No. 50132S
Double gang Double face Duplex\125v\15a Cat. No. 50033D
FAUCET
SERVICE FIXTURES AND SERVICES
Cat. No. 50026
ELECTRICAL SERVICE OUTLETS
HOT AND COLD WATER FAUCET 6" swivel gooseneck with wrist handle controls 1/4" NPT. ADA Compliant. Cat. No. 50040
SINGLE FLANGE MOUNTED KEYCOCK Integral flange and shank connection. 3/8" NPT. Epoxy coated brass.
Cat. No. 50025
Bench top service fixtures are chrome plated brass. All fixtures have serrated hose connections except where noted. Color coated service handles and hole cutouts in bench top are provided. Fixtures are not factory installed. Please specify service required and fixture location.
Single water 6" swivel gooseneck 1/4" NPT.
Cat. No. 50015
PVC faucet for distilled water 6" rigid gooseneck 1/2" NPT
Cat. No. 50043
FOOT PEDAL REMOTE CONTROL valves with heavy chrome plating. ADA compliant Single Pedal Cat. No. 50021 Double Pedal Cat. No. 50020
Brushed cast aluminum box with duplex and stainless steel covers. Please specify desired location of pedestal box when ordering.
ELECTRICAL STRIP Each length complete with plank end fittings and one coupling. Unit is wired with No. 12 TW wire and features 6" centers. Available in 6' lengths 125v 3-wire, single circuit grounding. Please specify desired location. Cat. No. 50085
SINGLE SERVICE REMOTE CONTROL Epoxy coated brass. 3/8" NPT. Color Coded index buttons with matching color coded serrated tip outlets Cat. No. 50013
COLD WATER REMOTE CONTROL Epoxy coated brass turret. 3/8" NPT. Cat. No. 50012
COLD WATER REMOTE CONTROLLED 6" SWIVEL GOOSENECK Turret and gooseneck are PVC or epoxy coated brass. 3/8" NPT.
Cat. No. 50112
TOGGLE SWITCH WITH NEON PILOT
Cat. No. 50052
KEYCOCK
DISTILLED WATER GOOSENECK
GOOSENECK FAUCET
GROUND FAULT INTERUPTER 115v , 15 amps Cat No. 50048
MIX FAUCET Hot and cold water 6" swivel gooseneck. 1/4" NPT SINGLE FAUCET
6" swivel goose neck for use with foot pedal remote control 1/4" NPT
Hot and cold water 8" swivel gooseneck with aerator outlet. 1/4" NPT
Cat. No. 50027
Cat No. 50110
With integral vacuum breaker. 1/4" NPT
Cat. No. 50018
SINGLE RECEPTACLE 230v 15 amps Cat. No. 50030-1 20 amps Cat. No. 50030-2
6
DUPLEX RECEPTACLE 115v 15 amps Cat. No. 50029-1 20 amps Cat. No. 50029-2
SURFACE MOUNTED FIXTURES
COLUMN MOUNTED SERVICE FIXTURES FOR FUME HOOD
48" 60" 72" 96" Cat. No. Cat. No. Cat. No. Cat. No. 31411 31511 31611 31811
Cat. No. Cat. No. Cat. No. Cat. No.
31413 31513 31613 31813
FUME HOOD BASE CABINETS Constructed of top grade welded furniture steel. All cabinets are 35" high and 22" deep. Cabinets are White with White, Beige, Gray or Blue doors/drawers.
FUME HOOD BASE TABLES are all welded construction of 2" square steel tube. Depth is 29", height is 36". Each leg has levelers. Baked on chemical resistant finish. Color-White
Width Cat. No. 48" 54812 60" 56012 72" 57212 96" 59612
Width Cat. No. 30" 53011 36" 50311 48" 50411
9
UNIFLOW LE FUME HOOD WITH VAPOR PROOF FLOURESCENT LIGHT Vertical-raising viewing sash is constructed of 1/4" clear tempered safety glass with frame and track fabricated of chemical resistant PVC.. Vapor proof, two tube, fluorescent light fixture mounted behind glass panel with column mounted light switch. Hood is shipped completely assembled All electrical services are U.L. approved and installed. Must be wired to comply to local codes. Requires a remotely located exhaust blower.
UNIFLOW LE HOOD WITH EXPLOSION-PROOF LIGHT Same as above, except equipped with explosion-proof, explosion-proof light fixture, U.L. approved Class 1, Group C & D, Class II, Group E, F & G. Electrical fixture is installed; must be wired to comply with local codes. Switch not included. Requires a remotely located exhaust blower
UNIFLOW LE LABORATORY FUME HOOD
AIR BYPASS CONSTANT VOLUME FUME HOOD AIR FLOW By-pass openings above and below the sash reduce fluctuations in face velocity as the sash is adjusted through a full range of motion.
EPOXY RESIN WORKSURFACE 1 1/4" thick top which is extremely hard, abrasion and heat resistant with 3/8" recessed work surface. 30" deep. Color: black
COMPOSITE RESIN WORKSURFACE 1 1/4" thick, work area is recessed 3/8" to contain spillage. 30" Deep. Color: gray
UniFlow Fume Hoods are constructed of advance composite materials that provide excellent chemical resistance and superior strength and durability. The molded, seamless interior fume chamber has a non-porous surface with easy to clean coved corners and edges. The soft white surface of the fume chamber has high light reflectivity that is glare free and user friendly.
Width Cat. No. 48" 20413 60" 20513 72" 20613 96" 20813
Width Cat. No. 48" 20415 60" 20515 72" 20615 96" 20815
Shown with optional worksurface, service fixtures and base cabinet.
WORKSURFACES BASE UNITS
Cat. No. Cat. No.
1. Rigid Ducting (10 ft.) 82011 82013 2. Coupling 82157 82159 3. 90° Elbow 82066 82068 4. 45° Elbow 82087 82089 5. Balancing Damper 82456 82458 6. Rain Skirt 82334 82336 7. Weather Cap 82356 82358 8. Blower Outlet Transition 82994 82996 9. Flex Ducting (12 ft. lengths) 80054 80055
10
Roof
Blower Mounting Platform by Others
SASH STOPS restrict how far the sash may be raised. Factory installed a t p re de te rm in ed positions, alternate positions can be field located.
AIR FLOW MONITOR continuously monitors fume hood face velocity and warns of dangerous conditions at low or high velocity airflow rates with audible alarm and warning light.
Cat. No. 51406
FACE VELOCITY/SMOKE VISUALIZATION TEST KITS
Perform flow visualization and face velocity measurement test of ASHRAE 110-95. Kit comes with one calibrator, smoke test bottle, 6 sets of face velocity markers, service record manual and detailed instructions.
Cat No. 51201
SAFETY SHIELD Clear acrylic shield slides horizontally to desired position or is easily removed. 16" W x 14 1/2" H
Cat. No. 52333
7. Weather cap
TYPICAL EXHAUST DUCT INSTALLATION
FUME HOOD VENTILATION & ACCESSORIES
Cat No. 51651
48"
26" "B"
SASH RAISES ABOVE TOP OF HOOD 8.5"
"A"
"C" DIA
8.5"
30"
8. Blower Outlet Transition
2. Coupling
3. 90° Elbow
6. Rain Skirt
1. Ducting 5. Balancing Damper
Ceiling
Exhaust Blower
SAFETY PANEL WITH ACCESS PORTS Clear acrylic panel connects to hood front with easy turn fasteners. 15" Height
60" 72"
55150 56150
Width with Catalog Number
Width
Cat. No.
48"
54150
96"
58150
EXHAUST AIR VOLUME REQUIRED 100 FPM with sash fully open
48" 60" 72" 96" 773 CFM 938 CFM 1162 CFM 1613 CFM
51714 51720 51726 51736
385 CFM 474 CFM 592 CFM 800 CFM 100 FPM with sash 50% open
51702 51706 51710 51718
Cat No.
Cat No.
DIM FUME HOOD SIZES "A" 48" 60" 72" 96" "B" 38" 50" 61" 85" "C" 10" 10" 12" (2)10"
EXHAUST BLOWER Belt dive, epoxy coated steel. Based on 25' maximum or less of ducting
PVC DUCTING 10" Diameter 12" Diameter
FUME HOOD SAFETY ACCESSORIES (see page 6 for fume hood service fixtures)
Prefilter - 15" x 15" Cat. No. 50121
HEPA Filter - 99.99% , 15" x 15" Cat. No. 50122
Activated Carbon Filter - 15" x 15" Cat. No. 50123
11
VSE BALANCE ENCLOSURE Versatile vented balance enclosure is ideal for critical weighing procedures involving
hazardous powders and liquids.
ACRYLIC VENTED ENCLOSURE Cat. No. 92200 Ideal size for micro balances. 22" width x 18" depth x 16" height . Enclosure has a 25° ergonomic viewing sash that swings up to a full 15" high access opening. A 6" high reach in height opening is below the sash. Constructed of 3/8 thick clear acrylic with slotted rear baffle and 4" dia. vent outlet. CLEAN-AIRE FILTRATION MODULE I Cat. No. 50110 Convenient solution to point of use exhaust and filtration. Module effectively collects particulates and/or fumes. Can locate on benchtop, floor, or shelf and connects to enclosure with flex ducting. Unit operates on 115v and is equipped with variable speed control from 0-250 CFM and 8' power cord. Note: Filters are not included with module. Please select filters required below. We recommend ordering replacement backup filters.
Prefilter - 9¼" x 8¼" Cat. No. 50111
HEPA Filter - 95% , - 9¼" x 8¼" Cat. No. 50112
Tri-Media Carbon Filter - 9¼" x 8¼" Cat. No. 50113
ACRYLIC VENTED ENCLOSURE
VSE - Cat. No. 83600 shown above with optional C - Frame table & Phenolic worksurface.
VSE - Cat. No. 84800 shown to left with op-tional PolyPro Mobile cabinet, Phenolic work-surface and Clean-Aire Filtration Module II.
The VSE comes in 24", 36" and 48" widths to accommodate all analytical balances. Efficient air flow design with air foils and by pass directs airborne particulate to baffled exhaust thereby providing superior air flow and containment performance for user protection. The ergonomic design provides added user comfort. Constructed of chemical resistant liquid metal framing with 1/4" thick clear tempered safety glass side panels and viewing sash. The viewing sash is angled 15° for ease viewing comfort with 8" reach in opening height. Sash swings up to provide 20" of access opening. 2 service ports are located in lower right & left rear wall.
CLEAN-AIRE FILTRATION MODULE II Cat. No. 50120 Convenient solution to point of use exhaust and filtration. Module effec-tively collects particulates and/or fumes. Can locate on benchtop, floor, or shelf and connects to enclosure with flex ducting. Unit operates on 115v and is equipped with variable speed control from 0-600 CFM and 8' power cord. Note: Filters are not included with module. Please select filters required below. We recommend ordering replacement backup filters.
DESCRIPTION
24" wide 36" wide 48" wide
VSE BALANCE ENCLOSURE 24" depth x 22" height
82400 83600 84800
PHENOLIC WORKSURFACE 12418 13618 14818
C-FRAME TABLE 24" d x 30" h Add suffix “c” for casters
50203 50303 50403
FLEX DUCT 6" dia. x 12' long 80052 80052 80052
EXHAUST FAN 115 Volts, 60 Hz for remote mount
51051 51052 51053
POLYPRO MOBILE CABINET 24" depth x 36" height
70241 70361 70481
CATALOG NUMBER
SUSPENDED CANOPY HOOD MOUNTING KIT comes with four 10' vinyl coated aircraft suspension cables with eyebolts and hardware. Cat. No. 23001
WALL CANOPY HOOD MOUNTING KIT comes with all components to secure the canopy hood to a wall. Cat No. 23002
24/30"
Top View
Outlet Diameter
A
Side View
18"
Top View
44.5"
25.5"
25.5"
44.5"
10" Outlet Diameter
18"
Side View
12
CORNER COMPOSITE RESIN WORKSURFACE dished to contain spillage. Cat. No. 13503 CORNER TABLE welded steel construction Cat No. 13502 CORNER CANOPY WALL MOUNTING KIT comes with all components to secure the canopy hood to the walls Cat. No. 23003
CANOPY HOODS
Cat No. 13000
Canopy Hoods are designed to collect and exhaust corrosive vapors, heat, steam and odors when mounted over areas with water baths, hot plates or portable equipment.
PORTABLE TABLE TOP HOOD Integral side and rear panels reduce cross drafts to provide a turbulent free env i ro nm en t . A l l f i b erg las s construction provides superior chemical resistance. Worksurface is recessed to contain spills. A 3" vent collar is included for duct connection. Dimensions are 24" w x 24" h x 15" d.
Cat. No. 24000
ADJUSTABLE HEIGHT TABLE TOP HOOD Features a canopy that can be adjusted from 1" to 20" high and a recessed work surface to control spills. All fiberglass construction gives superior chemical resistance. Vent collar connects to a 3" duct. Dimensions 18" w x 15" d.
Cat No. 14000
18"
Side View
30"
Top View
Outlet Diameter A
TABLE TOP HOOD ACCESSORIES (for 24000 and 14000 above)
3" EXHAUST BLOWER Cat. No. 51050 3" QUICK CONNECT Cat. No. 50130 3" VENT OUTLET Cat. No. 80073 3" FLEX DUCTING (12' lengths) Cat. No. 80047 CARBON FLITER BACKPACK Cat. No. 51010 REPLACEMENT CARBON Cat. No. 52004
VAPOR PROOF LIGHT & SWITCH with 6' 3-wire cord Cat. No. 80035
"A" Dimension 36" 48" 72" 96"
Outlet Diameter 6" 8" 10" 12"
Cat. No. 13030 13040 13060 13080
"A" Dimension 36" 48" 72" 96"
Outlet Diameter 6" 8" 10" 12"
Cat. No. 23030 23040 23060 23080
CORNER CANOPY HOOD
ISLAND CANOPY HOODS
WALL CANOPY HOODS
TABLE TOP CANOPY HOODS
CLEAN-AIRE FILTRATION MODULE II Convenient solution to point of use exhaust and filtration. Module does not include a prefil-ter, HEPA or carbon filter to effectively collect particulate and/or fumes. Easy filter access. Can locate on benchtop, floor, on shelf and connects to hood with flex ducting. Unit oper-ates on 115v with 6’ power cord. Cat. No. 50120
13
MOBILE TABLES AND WORKSTATIONS
MOBILE TABLE Features adjustable height from 28 1/2" to 38 1/2" and comes in two sizes; 36"L x 24' W and 48"L x 30" W. The top is chemical resistant, plastic laminate, with matte finish and black perimeter edge bumper. Heavy-duty all welded steel construction and four 250 lbs. capacity swivel casters. Two castors are lockable.
Vented work enclosure is designed to isolate classroom demonstrations, lab automation equipment & processes, and safely exhaust fumes & odors. Enclosure features 360° viewing allowing students to safely observe science demonstrations. Convenient horizontal slide door access is on the instructor side. A ceiling baffle maintains uniform exhaust and exhaust collar allows for duct connection. Enclosure dimensions are 60" w x 36" d x 42" h. DEMONSTRATION II HOOD Cat No. 76036 OPTIONAL ACCESSORIES WORK SURFACE chemical resistant Phenolic resin 1" thick, color - black. Cat. No. 76017 MOBILE TABLE welded steel construction with chemical resistant finish, lower shelf and swivel casters - two lockable. 60"w x 36"d x 36"h Cat. No. 75012
36" 48" 70315 70415
FIXED HEIGHT TABLE Width Cat. No
36" 48" 70318 70418
ADJUSTABLE HEIGHT TABLE Width Cat. No
MOBILE CABINET Cabinet is constructed of welded chemical resistant recycled polypropylene. Available in two sizes 36" and 48" widths. Included work surface is polypropylene. Hinged front doors with non-metallic hinges and handles. Heavy-duty swivel casters with two lockable. 36” height.
36" 48" 51311 51411
MOBILE CABINET Width Cat. No
C-FRAME TABLE Table is constructed of welded steel with a chemical resistant finish. Available in 30", 36", and 48" widths in either 30" sitting height or 36" bench height. Chemical resistant 1" thick phenolic resin work surface and adjustable levelers. For mobile requirements, table is available with casters.
36" 48" 50303 50403
C-FRAME TABLE - 36" HEIGHT Width Cat. No
30" 50203
36" 48" 50313 50413
C-FRAME TABLE - 30" HEIGHT Width Cat. No
30" 50213
DEMONSTRATION II HOOD
14
SAFETY STATION
HAND HELD EYE/FACE WASH Chrome-plated brass unit features remote push-plate operated "stay-open" ball valve, counter mounting flange, soft stream head, 6 ft of high pressure hose and 1/2" I.P.S. male inlet.
Cat No. 16007
EMERGENCY SHOWER BOOTH
EMERGENCY SHOWERS AND SAFETY EQUIPMENT
Unit is equipped with a pull rod activation overhead drench shower and rear wall mounted eye/face wash. Molded of seamless chemical resistant white fiberglass. 1 1/4 IPS inlet and 3" PVC drain outlet. 90" h, 40" w and 36" d Cat. No. 16601 DRENCH SHOWER BOOTH WITH WASTE STORAGE Drench shower with waste rinse compartment drum and pump. System includes shower booth, 55 gallon capacity drum and chemical resistant 30 GPM pump. Cat. No. 16603
A multi purpose drench shower, Eye/Face Wash and Safety Supply Storage Cabinet all in one. Sanitary white polypropylene construction means there is no wood or metal to rot or rust. Equipped with a pull rod activated shower and push handle eye/face wash for quick rinsing in emergencies. Towels and first aid supplies can be stored in the cabinet below. Fully assembled and ready for installation to water supply. Supply 1" IPS, Drain 11/4" NPT. Stations are 24" D and 84" h
Width 30" 36” Cat. No. 78001 78001
EYE/FACE WASH Wall-mounting unit features a stainless steel, or optional Cycolac, bowl with 2 large plastic heads, push plate operated "stay-open" ball valve, 1/2" I.P.S. inlet and 11/4 " I.P.S. drain Cat. No. 16006
OVERHEAD DRENCH SHOWER Unit features 10" diameter Cycolac plastic head and 1" I.P.S. brass "stay open" valve with rigid pull rod and handle.
Cat. No. 16088
visit www.HEMCOcorp.com HEMCO Corporation 111 Powell Road Independence, MO 64056
Phone: 816-796-2900 Fax : 816-796-3333 E-Mail : [email protected]
CONSIDER A MODULAR ROOM TO COMPLETE YOUR LAB LAYOUT
Dedicated work environment featuring an all-glass modular construction with a distinctive high tech an-gled upper panel. • Allows for visual observation of personnel or
process in the enclosure • Serves as secondary containment between the
fume hood and the lab • Transparent walls provide an open un-confining
full vision work space • Capable of incorporating existing walls as part of
the enclosed area • Utilizes a greater amount of surrounding light. • Isolates and contains hazardous operations
Modulab Designated Lab Work Area
Unilab Regulated Lab Work Area
Modular workspaces are constructed to meet your specific laboratory specifications. • Pre-engineered modular construction for
fast delivery. On time, On budget • Adaptable to existing lab space or expan-
sion into warehouse space • Can be easily assembled, moved, modified
and re-erected as needs change • Insulated wall system features chemical
resistant and easily cleanable surface skin panels
• Optional furniture layouts, fume hoods,
controlled supply and exhaust air systems
Modular Clean Room Clean rooms are pre-engineered and built to your exact size, design, and cleanliness specification
• Class 100 to 100,000 HEPA filtered systems • Single pass or recirculating air systems • Optional dedicated temperature / humidity con-
trol systems • Wide selection of door entry, airlock, and pass
thru sizes. • Lighting and control packages • Modular hard wall construction
