Furnware Lighting Product Selection 2014

Furnware Lighting Product Selection 2014

Our comprehensive range of products is continually being evaluated and improved

Furnware Lighting Product Selection

CONTACT US | FURNWARE TRADING Co.

Website

Website www.furnware.net.au

Telephone

Phone 02 9548 4888

International +61 2 9548 4888

Free Call 1800 101 009

Facsimile

Fax 02 9548 6191

Email

Email [email protected]

Address

Postal PO Box 250 Engadine, NSW 2233

HeadOffice18 Burns Road Heathcote, NSW 2233

Distribution Centre 1-5 Jessica Place Prestons, NSW 2170

Trading Hours

OfficeOpeningHours 8am to 5pm Monday - Friday

ABN 78 588 941 715

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.

Furnware L ight ing Product Select ion 2014

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.

Free Cal l 1800 101 009 Fax 02 9548 6191 Emai l [email protected] Website www.furnware.net.au 1

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.

Furnware L ight ing Product Select ion 2014 2


The team at Furnware are proud to release the latest range of

Domus Line cabinet lighting, designed and manufactured in Italy,

of which we are the sole Australian distributor. Domus Line’s range

of cabinet lighting brings together quality products, cutting-edge

technology, responsible environmental values and the very latest

in stylish and fashionable lighting solutions. Together we have

developed and extended the LED lighting range and continue to

develop an already wide range of accessories.

This brochure showcases our full collection of Domus Line lighting,

and the detailed product descriptions and images make this

extensive range the 1st choice for decision-makers, cabinet makers,

designers and architects.

The Furnware Lighting Product Selection Guide 2014 is our view of

the future of cabinet lighting, and we welcome you to leaf through

these pages and be inspired by this innovative and beautiful range

of lighting solutions.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Introduction 4

12V dc

Metris V12 10

Kite 18

Skate 24

Smarty 30

Kayak 36

Dream 42

Leaf DR 48

Flexyled 54

Profile 74

Skyline 78

Goccia 84

IR Sensor 90

IR MK2 Sensor 92

Capsens V13 Sensor 94

IFR Sensor 96

TLD Sensor 98

350mA

Pixel 100

Led Drivers 106

Technical Information 108

Contents

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



IntroductionSymbols

Requires 12V dc constant voltage supply

MiniPlug Connectors

CR Connectors for continuous row installation

Multicolour RGB Technology

Micro RGB Connectors

CH Chained

Requires 350mA constant current power supply

Polarised BUS Connector system

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Introduction

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


What Is A Light Emitting Diode?

A Light Emitting Diode (LED) is a ‘solid state’ electronic component with the

characteristicsofadiodei.e.itonlyallowselectricalcurrenttoflowinone

directionthroughit.WhenthecurrentflowsthroughanLEDinthecorrect

direction,theLEDproduceslightofaspecificcolour.

LED’sonlyproducelightofcertainspecificcolour.Duetoavariationinthe

method used to manufacture LEDs that emit white light, different colour

temperatures are available - e.g. 6500 K, 5500 K, 4700 K, 3200 K and 2700 K.

How Do LEDs Work?

At the heart of every LED there is a very small piece of semi-conducting

material called the LED ‘die’. The die can be considered in the same way as

thefilamentinalamp,becauseitisthediethatproducesthelight.Thesizeof

a high power LED die is approximately a 1mm cube and for other LED types

much smaller.

Thebaseofthedieisgluedorsolderedintoafinemetalframework(thelead

frame).AveryfinewirecalledabondwireisattachedtothetopoftheLEDdie,

whichhasaveryfineconductivemetalpatternonit.Thewireisattachedtothe

other side of the lead frame.

When electricity of the correct voltage and polarity is applied to the LED via the

leadframecontacts,currentflowsthroughthedie.

The different properties of the layers in the die cause between 50 and 90%

of this electrical energy to be converted into light at the junction by a process

called‘injectionelectroluminescence’.Thisprocessissignificantlymore

efficientthanvirtuallyanyotherlightsource!

Injectionelectroluminescencedoesnotrequireheatlikeafilamentlamp

(incandescence)orchemicalsthatglowlikethoseusedforafluorescenttube

(fluorescence).Itisaphenomenonthatiscausedentirelybyatomicdifferences

in the material caused by doping.

Efficiency

Unfortunately, a large proportion of the light produced at the junction does

not escape from the die and is reabsorbed, the remainder being converted

toheat.Asthisisanongoingdevelopmentprocess,efficiencyisincreasing

continuously.Evenso,theLEDisveryefficientcomparedtoconventionallight

sources. For example, an LED spotlight will consume only 5 to 10% of the

energy of a halogen spotlight to achieve the same performance.


The component parts of a discrete LED

Electroluminescence from an LED die. The bond wire can be seen at the top.

Lighting Innovation

Introduction

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


LED History & Evolution

LightEmittingDiodesorLEDsoperateverydifferentlytofilamentlamps,

dischargelampsandfluorescenttubes.

Theyoperateby‘Injectionelectroluminescence’,aphenomenonfirstobserved

in 1907 by H. J. Round experimenting with Silicon Carbide. However, as he

was really looking for new ways of radiolocation in seafaring, his discovery was

completely forgotten about.

• Itwasn’tuntil1962thatthefirstredLEDswereinvented.

• Thefirstdigitalwatch,the1972Pulsar‘TimeComputer’,usedLEDsforitsdisplay.

• Bythemid70’sothercolourshadjoinedredincludingyellow,orangeand

green,althoughtheefficiencyandlightoutputwasstillverypoor.

• Between1970and1995thelightoutputofredLEDsincreasedbyafactor

ofapprox45andbetween1995and2003theefficiencyofLEDsincreased

by an light output per LED package by a factor of 430.

ThenetresultisthattodayLEDshavetheefficiencyandlightoutputtobe

consideredformanyvariedapplicationsincludingtrafficsignalsandsigns,

large area video displays, car instrument and switch illumination.

Since 2005 further developments have seen a rapid growth in the use of LEDs

for higher levels of illumination. For example LEDs replaced incandescent

lamps (including headlamps) in cars in 2010.

In December 2007 Italy decided to join Australia and Ireland to ban incandescent

light bulbs. The ban took place in 2011. More European countries are planning

on following Irelands and Australia’s “bright” decision in the near future.

LEDs are already used for general lighting applications and decorative lighting

and will replace many conventional light sources in the near future.

Timeline of LED Development

1907:Thephenomenonofelectroluminescencewasfirstobservedinapiece

of Silicon Carbide (SiC) by Henry Joseph Round. The light emitted was too dim

to be of practical use.

1950s: British experiments using the semiconductor Gallium Arsenide (GaAs)

lettothefirstLEDintheearly1960s.Itproducedinfra-redlightandwasused

in sensing and photo-electric circuits.

1962:ThefirstvisiblelightLEDswereproduced.Theywereredandnotveryefficient.

1970s: Green LEDs were produced, and then yellow ones followed. Yellow was

initially achieved by combining red and green LEDs in one package.

1980s:Thefirst‘super-bright’LEDswereproducedbyusingGalliumAluminium

ArsenidePhosphide(GaAlAsP).Theyappearedfirstinred,thenyellowandgreen.

Early 1990s: Ultra-bright LEDs were produced using Indium Gallium Aluminium

Phosphide(InGaAlP).ThefirstblueLEDsstartedtoappear.TheyusedSilicon

Carbide, but their output was very dim.

Mid-late 1990s: Ultra-bright blue Gallium Nitride (GaN) LEDs arrived in the mid

1990s. These gave rise to white LEDs, in which the blue light from the chip is

absorbedbyfluorescentphosphorsandre-emittedaswhitelight.

Early 2000s: Recently developed LEDs are now producing ultra-violet light.

EfficiencyofallLEDsisgreaterthanever.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


White LEDs

An LED die emits coloured light that is virtually monochromatic, so to produce

whitelightatechniqueisusedthatissimilartothatusedinfluorescenttubes.

Inafluorescenttube,agasdischargeproducesultravioletlightwhichcauses

aphosphorcoatingmixontheinsideoftheglasstubetofluoresceandemit

usable white light.

Structure of a single chip white LED:

• AphosphorisaddedtothenormallyclearepoxycoveringtheLEDdie.

Alternatively the latest technology provides a more homogeneous white

light using chip level conversion (CLC), applying a thin phosphor layer on

top of the die.

• AblueLEDdiestimulatesthephosphor.

• Thephosphoremitsayellowishlight.

• ThelightfromthephosphorandtheblueLEDcombinetoproducewhite

light of different colour temperatures.

Colour Temperature

Because the white light is produced by mixing the light from two sources (die

and phosphor) and the proportions of light from the two sources can vary,

the colour temperature of a white LED can lie between 2700 K and 11000

K. Grouping of these LEDs is therefore essential to ensure that there is little

perceived difference in colour between individual discrete LEDs or LED modules.

TheluminousefficacyofwhiteLEDsisbetterthanatungstenhalogenlamp.

Multi-colour LEDs

The light from individual LEDs, particularly the primary colours red, green and

blue, can be mixed together to produce a wider range of colours.

By incorporating a red, green and blue (RGB LED) die into the same package

the LED can be used for applications ranging from large area video screens

using up to 50,000 LEDs per square metre, to colour changing luminaries for

lighting whole buildings.


Individual die red, green and blue.

Typical warm white LED Typical natural white LED

LED RGB into the same package

Introduction

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Why Use LEDs For Lighting

Key features:

• Longlife(upto50.000operativehourswith70%oftheluminousflux

guaranteed) clean light without components IR and UV high safety factor

due to the low voltage feed

• Verylowheatdispersion(noburnrisk)

• Nomaintenancecosts

• VerylowEnergyconsumption

• Instantlighting(lessthen100ns)

• Highperformances

Reliability

Unlike the majority of lamps, LEDs do not suffer ‘catastrophic failures’

(i.e. stop producing light in normal operation). With an LED, the light output

gradually reduces over time, the rate of light output reduction being

dependent primarily on the average operating temperature of the LED die

(the junction temperature).

As the time for the light output of an LED to decline to a level where it is no

longer usable could be tens of years, then the agreed method for specifying

LED lifetime is the time after which the light output falls to 50% of its original

value. Even with this method, the lifetime for LEDs under the right conditions

can be as much as 150,000 hours (17 years) continuous operation and the

LEDisstillemittingusablelight!

As LEDs are solid in their construction and are not made from fragile materials

they have a high immunity to shock and vibration.

Efficiency

As mentioned above, it currently needs only 1 white LEDs to duplicate the light

output of a 20 Watt halogen bulb, but the power consumption of the LEDs

wouldonlybe1.2Watts!However,afluorescentlampwouldconsumeinthe

region of 8 Watts to produce the same amount of light. At present white LEDs

canofferenergyefficientalternativesinsome,butnotallapplications.

Inapplicationswherecolourisutilised,LEDsoftenofferahigherefficiencythan

filteredwhitelightsources,includingfluorescenttubeswhichreducesheat

dissipation,energycostsandthesizeandcostofpowersupplies.Thisinturn

reduces the design and construction cost of luminaries as there is no need to

accommodate LED replacement or to deal with very high temperatures.

nature’s friend

taking care cold attitude nature’s friend go ahead

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Furnware Lighting Product Selection12

V

Metris V12Professionalfixturesforaccentlighting

Materials:

Thermoplastic Polymer

Finishes:

White, polished chrome, satin nickel

Light Sources:

LED module with pix-screen light

Installation:

Recessed and surface mounted

The METRIS collection has been developed around the METRIS

spotlight which integrates a ‘light sandwich’ composed of a 24 LED

module and a high-performance pix-screen light. The METRIS range

allowsforsevendifferentconfigurationsincludingfullyrecessed,

surface mounted and angled surface mounted. The extra thin 8mm

installationdepthand57-60mmdiameterholeofthebasicfitting

makes METRIS a perfect replacement for halogen spotlights.

The low heat output of LEDs means that this spotlight can be safely

recessed into an 8mm hole in 16mm board without having to allow

for ventilation and heat gaps. The high performance of the LEDs

(120 lumen per watt), the carefully selected colour temperatures

(warm white and the new natural white), the high yield pix-screen

light, and the wide range of mounting accessories available (surface

mounting spacers, inclined spacers, stainless steel mountings for

easyretrofitting,sensorsandcabling)maketheMETRIScollection

a truly versatile light source that is quick and easy to install and

suitableforaninfinitevarietyofapplications.

Metris V12

Metris SP

Metris OB

Giza

Akira V12

Maya

Evometris

Ø 70,5

1,2

8

Ø 70,5

Ø 57/60

8

32

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Metris V12

12V


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

12

Housing Technopolymer

Diffusers Methacrylate with multi-optics

Power supply

Finishes White (WH)

Polished Chrome (CP)

Satin Nickel (SN)

Colour Appearance Natural white

Colour Temperature 4000 ÷ 4500 Kelvin

Luminous Efficacy 120 lm/W

Colour Rendering Index Ra 70

Colour Appearance Warm white




Metris V12

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Universal Recessed Installation

The 8mm installation depth makes METRIS a

trulyuniversalfitting.Itcanbeflushmounted

using a blind or through hole in timber panels.

The fastening system is quick and does not

require tools and is achieved through lateral

pressure provided by harmonic steel springs.

Thepowercableis2000mmlongandisfitted

with MiniPlug connectors that can be passed

throughaholewithaminimumsizeof

8mm diameter.

Surface Installation

Two types of spacers allow for surface mounting

of METRIS lights. The SP version is a straight

mounting block 12mm high. The OB version has

a20°angletoallowthefittingtobeinstalled

against a vertical surface where the power cable

can be easily hidden at the back of the cabinet,

whilst ensuring uniform lighting of the

worktop surface.

Stainless Steel Spacer Installation

There are three types of stainless steel spacers

in the METRIS range all being surface mounted

andbeingidealforretrofittingsituations.

EVOMETRIS and MAYA both have extended

housings which run back to the vertical surface

allowing the power cables to be easily hidden,

while moving the light position further forward.

GIZA is a more traditional triangular housing

having a 20° angle of inclination which allows

the light to spread further away from the

vertical surface.

Recessed Installation with Switch

AKIRA V12 unites the versatility of a recessed

spotlight with the practicality of an integrated

switch. The mounting is stainless steel with a

black rocker switch. Minimum hole depth

is 12mm.

Metris V12

Metris SP

Giza

Akira V12

Maya

Metris OB

Evometris

For recessed installation on wood shelf

Ø 8mm

Ø 8mm

Ø 8

mm

Ø 8mm

Ø 8mm


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

14

Metris V12

Made in Italy to comply with Australian Standards

24 LEDs - Total 1.6W

12 Volt

2m cable with MiniPlug Connectors

Available in Chrome Plated, Satin Nickel or White

8mm installation depth

RecessedLEDlightfittingonly.Forspacersandmountingseebelow.

Part No.

Light Colour

Finish

DM12.WW Warm White CP, SN, WH

DM12.NW Natural White CP, SN, WH

Metris SP Spacer


Spacer for surface mounting Metris lights

Available in Chrome Plated, Satin Nickel and White

Spacer only. Light must be ordered separately (Metris V12 above).

Part No.

Finish

METSP CP, SN, WH

Metris OB Spacer


20° angled spacer for surface mounting Metris lights

Available in Chrome Plated, Satin Nickel and White

Spacer only. Light must be ordered separately (Metris V12 above).

Part No.

Finish

METOB CP, SN, WH

Metris V12

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

GizaV12



12 Volt


18/10 Brushed stainless steel

Matches Satin Nickel (SN) lights

Part No.

Light Colour

Finish

DGZV12.WW Warm White SS

DGZV12.NW Natural White SS

Akira V12


Recessed Metris V12 light with intergrated rocker switch


12 Volt



Fitting complete with light

Part No.

Light Colour

Finish

DMAK.WW Warm White SS

DMAK.NW Natural White SS

For compatible drivers see page 17


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

16

Maya V12



12 Volt




Part No.

Light Colour

Finish

DMAV12.WW Warm White SS

DMAV12.NW Natural White SS

Evometris V12



12 Volt




Part No.

Light Colour

Finish

DEVM12.WW Warm White SS

DEVM12.NW Natural White SS

Metris V12

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Extension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, andthelightfitting

This cable should be kept to the minimum length possible and must not exceed 6m total length

Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre

Distributor Block Extension - MiniPlug

Distributor block extension with 12 MiniPlug Sockets

Suitable for all 12V dc Domus lights

Part No.

DMP12.DIS

12V dc LED Drivers

Fully approved to Australian Standards

Supplied with 2m lead and plug

Supplied with 12 MiniPlug Socket distributor block connected

Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W LED Driver Capacity

15W - Suitable for up to 8 x Metris V12 lights30W - Suitable for up to 16 x Metris V12 lights

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

Kite CollectionArchitecturalfixturesforaccentlighting

Materials:


Finishes:

White, Satin Nickel

Light sources:

LED modules for pix-screen light

Installation:

Surface

Design patent pending

DOMUS Line continues its quest for new frontiers in cabinet lighting

with the all new KITE collection. Born out of the encounter with

renowned Italian designer Giuseppe Bavuso’s creativity, the KITE

range renews the aesthetics of under cabinet lighting conventions

with a formal, technological approach and meticulous attention

to detail. The result is an essentially minimalist object where the

smoothlinesincorporateatechnicaladvantage.TheKITEfixture,

developed with a ‘lighting sandwich’ made up of 24 LED modules

and a high performance pix-screen light has the option of an

integrated multi-function TouchLED dimmer switch for under cabinet

applications. The TouchLED switch incorporates a master dimmer

which simultaneously controls all the LED ‘slave’ lights connected

to it. The clever concealed slide mounting system hides the power

supplycorddirectlybehindtherearoftheLEDfittingandtheslight

inclination of the light module ensures a uniform illumination of the

worksurface.AvailableintwomodernfinishesSatinNickeland

White, the KITE collection features the new Natural White

LED colour. Design patents pending.

Kite TLDM

Kite Slave

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Kite Collection

12V


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

20



Power supply

Finishes White (WH)

Satin Nickel (SN)





Kite Collection

TouchLED TLD Sensor Operation

Domus Line have perfected the TLD Sensor

‘TouchLED’ dimmer switch and incorporated

this innovative device into many of their latest

lighting designs. This multi-function switch

also has been added to the ‘master and slave’

lighting system in some devices.

The switching on/off of the devices connected

to the TLD Sensor is carried out with the single

touch of the LED on the TLD Sensor.

It is possible to adjust the intensity of the light

byholdingafingerontheLED.Abriefflashof

the LED indicates that maximum brightness

has been reached. The brightness level will be

memorizeduntilthenextadjustment.

The TLD Sensor also integrates a ‘night-light’

function which activates only when the devices

are switched off. In a daylight or bright

environment, the LED on the TLD Sensor glows

with a soft dim light. With low or no light, the

brightness of the LED increases providing a

handy ‘night-light’ function. The ‘night-light’

function can be activated or deactivated by

holdingafingerontheTLDSensorfor15

seconds after which, the deactivation of the

functionwillbenotifiedby2slowflashesof

theLED,oritsactivationby3fastflashes.

TheTLDSensorisfittedwithasafetyprogram

that turns off all connected devices after

18 hours of continuous operation.

A further feature of the TLD Sensor is ‘auto-on’

that automatically turns on the connected LED

fittingsatthepreviouslysetluminosity.This

function is especially useful for the automatic

turning on of a collection of Lights for example

in a show room. When the main light switches

are turned on, the detail lighting will activate at

their various pre-set brightness without having

to adjust all the levels individually.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Surface Installation with Sliding Bracket

KITE is surface-mounted, using an innovative

slidingbracketsystem.Thefixturehasa

rear compartment which hides the MiniPlug

Connectors and the power supply cord. This

means that the KITE can be easily installed

after the cabinet has been installed. The

power supply cable is 2 metres long and

come complete with MiniPlug Connectors.

The projection angle ensures a uniform

illumination of the work surface.

KITE TLDM incorporates a multi-function

TouchLED dimmer switch that can be used as

asingleLEDfitting,orcanbeusedasamaster

controlforotherLEDfittings.Thisfeature

simultaneouslycontrolsall‘salve’fittings

connected to it.

The output cable of the KITE TLDM

can supply up to a maximum of

30W @ 12V dc including the load of

themasterfitting.OneKITETLDMcancontrol

upto16KITEslavefittings.Pleaseensure

powersupplyhassufficientcapacitytosupply

allthelightfittings.

Master and Slave System – Set-up example


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

22

Kite TLDM - Master


Integrated master touch dimmer switch with night light feature

Use with Kite Slave (below) to create a master & slave system

24 high performance LEDs

Can be used as a stand alone unit with dimmer switch

1.6W (TLD master dimmer maximum load 30W)


Fitting only. (LED driver must be ordered separately).

Part No.

Light Colour

Finish

DKTEMST.NW Natural White WH, SN

Kite Slave


Use with Kite TLDM (above) to create a master & slave system


Can be used as a stand alone unswitched unit

1.6W



Part No.

Light Colour

Finish

DKTESLA.NW Natural White WH, SN

Kite Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 8 x Kite lights30W - Suitable for up to 16 x Kite lights

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

Skate CollectionArchitecturalfixturesforaccentlighting

Materials:


Finishes:

White, Satin Nickel

Light sources:

LED modules for pix-screen light

Installation:

Surface


The SKATE collection, designed by renowned Italian designer

Giuseppe Bavuso, is a masterpiece combination of research,

technology and style. The result is a minimalist aesthetic object whose

main appeal is in its simplicity, yet hidden within is a highly advanced

technologicalcore.TheSKATEfixture,developedwitha‘lighting

sandwich’ made up of 24 LED modules and a high performance pix-

screen light has the option of an integrated multi-function TouchLED

dimmer switch for under cabinet applications. The TouchLED switch

incorporates a master dimmer which simultaneously controls all

the LED ‘slave’ lights connected to it. The clever concealed slide

mounting system hides the power supply cord directly behind the rear

oftheLEDfittingandtheslightinclinationofthelightmoduleensures

a uniform illumination of the work surface. Available in two modern

finishesSatinNickelandWhite,theSKATEcollectionfeaturesthenew

Natural White LED colour. Design patents pending.

Skate TLDM

Skate Slave

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Skate Collection


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

26



























function can be activated or deactivated

byholdingafingerontheTLDSensorfor

15 seconds after which, the deactivation of the















Skate CollectionHousing Technopolymer


Power supply

Finishes White (WH)

Satin Nickel (SN)

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V


SKATE is surface-mounted, using an

innovativeslidingbracketsystem.Thefixture

has a rear compartment which hides the

MiniPlug Connectors and the power supply

cord. This means that the SKATE can be

easily installed after the cabinet has been

installed. The power supply cable is 2 metres

long and come complete with MiniPlug

Connectors. The projection angle ensures a

uniform illumination of the work surface.

SKATE TLDM incorporates a multi-function




simultaneouslycontrolsall‘slave’fittings

connected to it.

The output cable of the SKATE

TLDM can supply up to a maximum

of 30W @ 12V dc including the load

ofthemasterfitting.OneSKATETLDMcan

controlupto16SKATEslavefittings.

Pleaseensurepowersupplyhassufficient

capacitytosupplyallthelightfittings.



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

28

Skate TLDM - Master



Use with Skate Slave (below) to create a master & slave system






Part No.

Light Colour

Finish

DSKMST.NW Natural White WH, SN

Skate - Slave


Use with Skate TLDM (above) to create a master & slave system



1.6W



Part No.

Light Colour

Finish

DSKSLA.NW Natural White WH, SN

Skate Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 8 x Skate lights30W - Suitable for up to 16 x Skate lights

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

Smarty CollectionArchitecturalfixturesforaccentlighting

Materials:


Finishes:

Satin Nickel

Light sources:


Installation:

Surface


The SMARTY collection, designed by renowned Italian designer

Giuseppe Bavuso, is a unique combination of research, technology and

style. The result is a minimalist aesthetic object whose main appeal is

in its simplicity, yet hidden within is a highly advanced technological

core.TheSMARTYfixture,developedwitha‘lightingsandwich’made

up of 24 LED modules and a high performance pix-screen light has

the option of an integrated multi-function TouchLED dimmer switch

for under cabinet applications. The TouchLED switch incorporates a

master dimmer which simultaneously controls all the LED ‘slave’ lights

connected to it. The clever concealed slide mounting system hides the

powersupplycorddirectlybehindtherearoftheLEDfittingandthe

slight inclination of the light module ensures a uniform illumination of

theworksurface.Availableinanattractivemodernfinish,SatinNickel,

the SMARTY collection features the new Natural White LED colour.

Design patents pending.

Smarty TLDM

Smarty Slave

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Smarty Collection


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

32



Power supply

Finishes Satin Nickel (SN)












































Smarty Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V


SMARTY is surface-mounted, using an

innovativeslidingbracketsystem.Thefixture

has a rear compartment which hides the

MiniPlug Connectors and the power supply

cord. This means that the SMARTY can be

easily installed after the cabinet has been

installed. The power supply cable is 2 metres

long and come complete with MiniPlug

Connectors. The projection angle ensures a

uniform illumination of the work surface.

SMARTY TLDM incorporates a multi-function





connected to it.

The output cable of the SMARTY



ofthemasterfitting.OneSMARTYTLDMcan

controlupto16SMARTYslavefittings.

Pleaseensurepowersupplyhassufficient

capacitytosupplyallthelightfittings.



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

34

Smarty TLDM - Master



Use with Smarty Slave (below) to create a master & slave system






Part No.

Light Colour

Finish

DSMMST.NW Natural White SN

Smarty - Slave


Use with Smarty TLDM (above) to create a master & slave system



1.6W



Part No.

Light Colour

Finish

DSMSLA.NW Natural White SN

Smarty Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 8 x Smarty lights30W - Suitable for up to 16 x Smarty lights

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Kayak CollectionArchitecturalfixturesforaccentlighting

Materials:


Finishes:

Satin Nickel

Light sources:


Installation:

Surface


DOMUS Line continues its quest for new frontiers in cabinet lighting

with the all new KAYAK collection. Born out of the encounter with

renowned Italian designer Giuseppe Bavuso’s creativity, the KAYAK

range renews the aesthetics of under cabinet lighting conventions

with a formal, technological approach and meticulous attention

to detail. The result is an essentially minimalist object where the

smoothlinesincorporateatechnicaladvantage.TheKAYAKfixture,

developed with a ‘lighting sandwich’ made up of 24 LED modules

and a high performance pix-screen light has the option of an

integrated multi-function TouchLED dimmer switch for under cabinet


which simultaneously controls all the LED ‘slave’ lights connected to

it. The clever concealed clip-on mounting system allows for recessed

orsurfacemountingandtherecessededgeofthelightfittinghides

the cut-out edge when used in a recessed situation. Available in the

latestmodernfinish,SatinNickel,theKAYAKcollectionfeaturesthe

new Natural White LED colour. Design patents pending.

Kayak TLDM

Kayak Slave


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Kayak Collection

12V


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

38



Power supply

Finishes Satin Nickel (SN)












































Kayak Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V


KAYAK can be installed surface mounted or

recessed into a pre-cut hole with the aid of

an innovative concealed bracket. The unique

designofthefitting,withaprotrudinglip,

covers the edge of the hole in a recessed

installation, yet still retains its great looks

when surface mounted. KAYAK is equipped

with a power supply cable 2000mm long with

MiniPlug connectors which can be run through

a hole of 8mm diameter. The power supply

cableisdetachableandallowsthefittingtobe

installedeasilyafterhavingfixedthecabinetto

the wall.

KAYAK TLDM incorporates a multi-function





connected to it.

The output cable of the KAYAK



ofthemasterfitting.OneKAYAKTLDMcan

controlupto16KAYAKslavefittings.Please

ensurepowersupplyhassufficientcapacityto

supplyallthelightfittings.



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

40

Kayak TLDM - Master



Use with Kayak Slave (below) to create a master & slave system






Part No.

Light Colour

Finish

DKYKMST.NW Natural White SN

Kayak Slave


Use with Kayak TLDM (above) to create a master & slave system



1.6W



Part No.

Light Colour

Finish

DKYKSLA.NW Natural White SN

Kayak Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 8 x Kayak lights30W - Suitable for up to 16 x Kayak lights

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

DreamArchitectural devices for effective lighting

Materials:

Techno polymer

Finishes:

Grey dyed on the body

Light sources:

LED, RGB LED

Installation:

On the surface, semi-recessed or completely recessed

Registered design

As a result of research carried out by DOMUS Line’s technical staff,

DREAM brings together unique lighting effects and professional

lighting solutions. DREAM is a courtesy light designed to be

installed wherever decorative lighting is required. The DREAM unit

is characterised by a stainless steel insert that acts as an anti-glare

screen and a Soft Touch electronic switch. DREAM has a thickness

of only 10mm and can be installed on the surface, either as semi-

recessed (keeping only the diffuser out of the recess) or completely

recessedsothattheunitisflushwiththesurroundingsurface.

Made from injection techno polymer, it has a polycarbonate diffuser

withasatinfinish.DREAMintegratesahighpowerLED,whoselight

projection is conveyed inside the thin diffusing screen, exploiting

thephysicalprincipleoftotalinternalreflection.Thefulllighteffects,

with lighting of the perimeter, and the ‘star’ effect which produces

a blade of light that accentuates on the four corners, are unique to

DREAM and have a strong effect.

DREAM is also available with RGB technology and a built in colour

changing sequencer. With a simple touch of the Soft Touch switch,

it is possible to either choose your desired colour, or to start a wide

ranging mix of colours from purple to pink, from orange to cyan,

fromdeepbluetolightblueandbeyond!Thecolourchanging

sequence can be stopped at any desired colour making it possible

to customise the light colour to suit your emotions. The design of

the DREAM, with no sharp edges, very low heat output, and extra

low voltage makes it an ideal lighting solution in hotels, and even

for use in children’s bedheads.

Dream V10

Dream RGB

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Dream


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

44

Housing Polycarbonate

Diffusers Polycarbonate

Power supply

Finishes Light Grey (LTG)

Dream

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Universal Installation

DREAMisauniversalLEDfitting.Itcanbe

installedonaflatsurfacewithconcealed

screws, it can be semi-recessed (we

recommend that a 7mm deep groove is

created so that only the diffuser is left out to

enhancetheunit’sfulllighteffect)orflush

mounted within a recess that is 10mm deep.

Thesemi-recessedandtheflushrecess

installations are made easier by the shape of

the unit with 12.5mm radius corners.

The power cord is 2 metres long and equipped

with MiniPlug Connectors. The unit also has a

Soft Touch electronic switch to turn it on, turn

it off and to adjust the intensity of the light.

RGB Technology

DREAM RGB is also available with RGB

technology with LED lights that change colour.

It has the same physical characteristics as

the standard model. The operation and the

adjustment of the colour is very simple and

designed so that even children can use it.

With a touch of the switch, the unit is turned

on to the last colour saved. With a subsequent

longer touch (3 seconds), the sequence of

colours is activated (red, green, blue and

all the intermediate shades). To stop the

sequence on a favourite colour, quickly touch

the switch when the desired colour has been

found. To turn off DREAM RGB, stop the

sequence of colours and then proceed with

another short and fast touch.

Surface installation

Semi Built-in installation

Built-in installation


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

46

Dream V10


12 Volt, 1.5W

Cool white only

Light grey body

Integrated touch dimmer

Part No.

Finish

DDV10.CW LTG

Dream RGB


12 Volt, 4.0W

Colour changing sequence, or can be stopped at any colour

Light grey body

Integrated touch switch

Part No.

Finish

DDRGB.RGB LTG

Dream

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 9 x Dream V10 or 3 x Dream RGB

30W - Suitable for up to 18 x Dream V10 or 7 x Dream RGB

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

Leaf DRLinearsurfaceprofileswithasymmetricalprojection

Materials:

Aluminium

Finishes:

Naturallyanodized

Light sources:

Standard LED module

Installation:

Surface

LEAFDRisapracticalandcuttingedgeLEDfixturewithalotof

benefits.HighqualityLEDstriplightformaximumillumination,a

specialdiffusertoreduceglare,andamultipurposeconcealedfixing

system which accommodates cabinet side thicknesses of 16mm,

18mm or 19mm. Designed essentially for kitchen cabinet drawers, the

LEAF DR projects the light forward into the open drawer. An infrared

sensorisintegratedintotheprofileandautomaticallyturnstheLEDs

on when the drawer is opened. Four popular widths ensure that most

drawer cabinets are catered for. LEAF DR is available in the new

Natural White LED light.

Leaf DR

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Leaf DR


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

50

Housing AW6060 Aluminium


Power supply

Finishes Anodised aluminium (ALU)





Leaf DR

* Illuminance’s levels of model LEAF 1160mm

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Concealed Fixing System

LEAF DR is installed using an innovative system

of brackets which attach to the side panels

of the cabinet. Cabinet side panels of 16mm,

18mm or 19mm can be used without changing

the external dimensions of the carcase, making

the installation fast and simple in a variety of

cabinetstylesandconstructions.Theprofileof

the LEAF DR has an electronic proximity switch

that automatically turns the light on when the

drawer is opened and turns the light off again

when the drawer is shut. The detection range of

the switch is up to 10mm.

Lighting projection outside cabinet


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

52

Leaf DR


Designed to illuminate the interior of drawers when opened

Innovative bracket system allows for 16, 18 or 19mm carcase sides

Automatically turns on when the drawer is open and turns off when the drawer is closed

12V dc


Leaf DR

Part No.

Light Colour

Cabinet Width (L) mm

LED’s/Power Finish

DLDR.450.NW Natural White 450 21 (1.68W) ALU




© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W


15W - Suitable for up to 3 lineal metres of Leaf DR

30W - Suitable for up to 6 lineal metres of Leaf DR

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

FlexyledFlexible linear strip lighting

Materials:

Flexible strip with adhesive backing

Finishes:

Reflectingwhite

Light Sources:

Standard module LED

Installation:

Surface and embedded

FLEXYLEDisahighlyinnovativeproductintheLEDflexiblestrip

market. Two models have been designed with different connection

systems to suit a wide variety of situations and installation types.

Conceived to allow a universal system of strip lighting without the

need of soldering equipment and allowing an IP44 protected strip to

be used, FLEXYLED CR incorporates a range of straight line modules

with an innovative quick plug system. This allows modules of different

lengths and 90° corners to be joined together in various ways to suit

virtually any situation. This connection system ensures a consistency

in the spacing between the individual LED chips, even at the joins and

thus keeps the light projection consistent and without shadow areas.

The LED modules are available in four different lengths and can be cut

every 50mm allowing each individual installation to be custom built.

FLEXYLED CH is designed to connect various lengths of LED strip

light together with an innovative solderless clip system. 25 and

5 metre rolls of IP20 LED strip light are simply cut to length and

clipped together to complete the installation.

The FLEXYLED LED chip is extremely high performance, with

87 lumens per watt and is available in two colour temperatures,

Warm White, and the new Natural White. All FLEXYLED strip lighting

hasahighlyreflectivewhitebackingand3Mself-adhesivebacking

tape for fast installation on virtually any smooth surface.

FLEXYLED is the ideal companion for use with Domus aluminium

profilesandisfullycompatiblewithallDomus12vDCsensorswitches

and power supplies.

Flexyled CR Modules

Flexyled CR Corner Modules

Flexyled CR Cables

Flexyled CH Rolls

Flexyled CH Cables

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Flexyled

12V


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

56



Power supply

Finishes White (WH)





Flexyled CR





* Illuminance’s levels of model FLEXYLED CR 1000mm


DefinitionofInternationalProtection(IP)Code

The IP coding system is an international coding system used to indicate the

degreeofprotectionaffordedbyanitemagainstaccesstohazardousparts,

penetration of solid foreign objects and ingress of water.

IP44 = Protected against solid foreign objects greater than 1mm.

Protected against splashes of water from any direction.

IP20=Protectedagainstsolidforeignobjectsgreaterthan12.5mm(e.g.fingers).

Not protected against ingress of water.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12VFourdifferentsizedmodulesareavailablefor

connection in a continuous line that can be a

maximum of 6 metres long. All modules can

be cut to lengths of 50mm increments without

affecting the performance of the LEDs.

All modules are equipped with micro

CR connectors.

The 2 metre power supply cord is sold separately

and is required to connect power from the

transformer to the FLEXYLED CR modules.

One power supply cord is necessary for each

individual run of FLEXYLED CR. The power supply

cableisfittedwithCRandMiniPlugConnectors.

FLEXYLED CR can be easily cut to lengths

of 50mm increments. This allows individual

installations to be customised.

90° corners are made simple with

FLEXYLED CR corner modules. Available

in both left and right hand versions, these

cornermodulesarefittedwithmicroCR

connectors which ensure a consistent gap

between LEDs and therefore an even light

flow.Thiseliminatestheshadowareas

produced by other methods of running

LED strip lighting around corners.

Highly resistant double sided adhesive

backing strip provides fast and simple

installation without the need for tools.

The highly transparent resin coating on all

FLEXYLED CR modules protects the LEDs

against moderate mechanical shock and

provides a protection rating of IP44. This

allows the FLEXYLED CR to withstand

splashes of water from any direction.

3 lengths of interconnecting cables are available

to allow for breaks in the lighting stream, without

having to run an additional power supply cable,

for example installing FLEXYLED CR either side

of a range hood. Interconnecting cables are

fittedwithCRconnectors.

Interconnecting Cable

Flexyled CR Continuous Line Modules Installation

Power Supply Cord


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

58

Flexyled CR Modules


Can be cut to lengths of 50mm increments

Maximum 6 lineal metres in one run

60 LED’s per metre

12 Volt

4.8W per metre

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See page 61).

LED strip only. Power supply cable must be ordered separately. (See page 61).

Flexyled CR - Interconnecting Cable

Connects between 2 lengths of Flexyled CR Strip

CR Connectors

Part No.

Length (L) mm

DFLEXCR.IC.250 250

DFLEXCR.IC.500 500

DFLEXCR.IC.1000 1000

Flexyled CR

Part No.

Light Colour

Length mm

LED’s (Watt)

DFLEXCR.250.WW Warm White 250 15 (1.20W)




DFLEXCR.250.NW Natural White 250 15 (1.20W)




© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Flexyled CR Corner Modules - Right


6 LED’s. Ensures consistant LED spacing at corners

Suitablefor90°cornersinthehorizontalplane.

12 Volt 0.48W

Compatible with the Flexyled CR Modules (above)


LED strip only. Power supply cable must be ordered separately. (See pg 61).

Part No.

Light Colour

DFLEXCR.CNR.R.WW Warm White

DFLEXCR.CNR.R.NW Natural White

Flexyled CR Corner Modules - Left


6 LED’s. Ensures consistant LED spacing at corners


12 Volt 0.48W

Compatible with the Flexyled CR Modules (above)


LED strip only. Power supply cable must be ordered separately. (See pg 61).

Part No.

Light Colour

DFLEXCR.CNR.L.WW Warm White

DFLEXCR.CNR.L.NW Natural White

Direction of power

Power supply end

Direction of power

Power supply end


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

60

Flexyled CRExtension Cable - MiniPlug

Use for extending cable between LED Driver distribution block, and the Flexyled CR - Power Supply Cable


Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Flexyled CR - Power Supply Cable

Connects power from LED driver to Flexyled Strip

1 Power supply cable required for each run of Flexyled Strip

2m long with MiniPlug and CR Connectors

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules

Part No.

DFLEXCR.PS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W

DSNP75.12 75W

2000

LED Driver Capacity

15W - Suitable for up to 3 lineal metres of Flexyled CR




© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

62

Housing Flexible Strip

Power supply

Finishes White (WH)





Flexyled CH





* Illuminance’s levels of model FLEXYLED CH 1000mm

* Illuminance’s levels of model FLEXYLED CH 1000mm

DefinitionofInternationalProtection(IP) Code

The IP coding system is an international coding

system used to indicate the degree of protection

affordedbyanitemagainstaccesstohazardous

parts, penetration of solid foreign objects and

ingress of water.

IP44 = Protected against solid foreign objects

greater than 1mm.

Protected against splashes of water

from any direction.

IP20 = Protected against solid foreign objects

greaterthan12.5mm(e.g.fingers).

Not protected against ingress of water.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

A new release from Domus Line is the

FLEXYLED CH. An innovative clip system

for joining Flexyled strips together to suit

any application. Using the FLEXYLED Rolls

20m IP20 Strip and these cutting-edge clips,

allows a strip to be constructed in virtually any

configurationupto6mlong.Stripslongerthan

6m will require an additional power supply

cable. To use the FLEXYLED CH clips, simply

slide the LED strip under the contacts on the

clip (making sure to align the + & - markings)

and snap the clip closed.

The 2 metre power supply cord is sold

separately and is required to connect power

from the transformer to the FLEXYLED CH.

One power supply cord is necessary for

each individual run of FLEXYLED CH. The

powersupplycableisfittedwithCHand

MiniPlug Connectors.

FLEXYLED CH can be easily cut to lengths

of 50mm increments. This allows individual

installations to be customised.

Thanks to an innovative clip system, FLEXYLED

CH can be joined quickly and easily without the

use of tools.

Highly resistant double sided adhesive backing

strip provides fast and simple installation without

the need for tools.

FLEXYLED CH has a protection rating of IP20.

3 lengths of interconnecting cables are available

to allow for breaks and corners in the lighting

stream, without having to run an additional

power supply cable, for example installing

FLEXYLED CH either side of a range hood.


Flexyled CH Continuous Line Installation

Power Supply Cord


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

64

Flexyled CH - Rolls

Can be cut every 50mm (3 LEDs)

12 Volt 4.8W/metre, 60 LEDs per metre

Maximum 6 metres in one strip length

LED strip only. Use FLEXYLED CH clips for connections

Part No.

Light Colour

Roll Length m

DFLEX.20B.WW Warm White 20

DFLEX.20B.NW Natural White 20

DFLEX.05B.WW Warm White 5

DFLEX.05B.NW Natural White 5

Flexyled CH - Power Supply Cable

Connects power from LED driver to FLEXYLED CH Strip

1 Power supply cable required for each run of FLEXYLED CH Strip (maximum length of FLEXYLED CH Strip is 6m)

2m long cable with Miniplug and CH clips connectors

Part No.

DFLEXCH.PS

Flexyled CH - Connecting Clip

Connects 2 lengths of FLEXYLED CH Strip

Ensure correct polarity is observed

Part No.

DFLEXCH.CC

Flexyled CH - Interconnecting Cable

Connects 2 lengths of FLEXYLED CH Strip via a wire

Allow for corners, gaps etc.

Ensure correct polarity is observed

Part No.

Length mm

DFLEXCH.IC.50 50

DFLEXCH.IC.100 100

Flexyled CH - Rolls

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Flexyled CHExtension Cable - MiniPlug



Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W

DSNP75.12 75W

LED Driver Capacity

15W - Suitable for up to 3 lineal metres of Flexyled CH



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

Flexyled RGB (Colour Changing)

Flexible linear modules

Materials:

Flexible strip with adhesive backing

Finishes:

Reflectingwhite

Light Sources:

RGB LED

Installation:

Surface and embedded

FLEXYLED RGB has been developed using Domus Line’s superior

RGB LED technology. Colour changing sequences have never been

easier with the availability of remote control units which allows for

various pre-set colour mixing patterns or solid colours covering a wide

spectrum. This makes it possible to personalise a lighting installation

to suit various moods and to individually match or compliment any

décor. FLEXYLED RGB has been designed to incorporate a special

quick connect Micro RGB connector system which eliminates the

need for time consuming and messy soldered connections. This

connection system ensures a uniform and consistent spacing between

the individual LED chips, thus eliminating shadow areas and bright

spots caused by uneven joints in the LED strip. The FLEXYLED RGB

modules are available in four lengths, which can all be cut to length in

75mm increments, and 90° corners are also available to continue the

smoothlightflowevenatthecorners.Highquality3Mself-adhesive

backing tape and interconnecting cables make the FLEXYLED RGB

both easy and quick to install.

Flexyled RGB Modules

Flexyled RGB Corner Modules

Flexyled RGB Sequencer & Controller

Flexyled RGB Cables

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Flexyled RGB


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

68

Flexyled RGB (Colour Changing) - Layout Map

LED Driver

Power Supply Cable

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Fourdifferentsizedmodulesareavailablefor connection in a continuous line that can be a maximum of 5 metres long. All modules can be cut to lengths of 75mm increments without affecting the performance of the LEDs. All modules are equipped with Micro RGB connectors.

The 2 metre power supply cord is sold separately and is required to connect power from the transformer to the FLEXYLED RGB modules. One power supply cord is necessary for each individual run of FLEXYLED RGB. ThepowersupplycableisfittedwithMicroRGB and MultiPlug connectors.

FLEXYLED RGB can be easily cut to lengths of 75mm increments. This allows individual installations to be customised.

90° corners are made simple with FLEXYLED RGB corner modules. Available in both left and right hand versions, these cornermodulesarefittedwithMicroRGBconnectors which ensure a consistent gap between LEDs and therefore an even light flow.Thiseliminatestheshadowareasproduced by other methods of running LED strip lighting around corners.

Highly resistant double sided adhesive backing strip provides fast and simple installation without the need for tools.

The highly transparent resin coating on all FLEXYLED RGB modules protects the LEDs against moderate mechanical shock and provides a protection rating of IP44. This allows the FLEXYLED RGB to withstand splashes of water from any direction.


3 lengths of interconnecting cables are available to allow for breaks in the lighting stream, without having to run an additional power supply cable, for example installing FLEXYLED RGB either side of a range hood. InterconnectingcablesarefittedwithMicroRGB connectors.

Flexyled RGB Continuous Line Modules

Power Supply Cord



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

70

Flexyled RGB Modules




40 RGB LED’s per metre

12 Volt

9.6W per metre

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules. (See page 73).

LED module strip only. Power supply cable must be ordered separately (See page 69).

Part No.

Length (L) mm

LED’s (Watt)

DFLEXCR.150.RGB 150 6 (1.44W)

DFLEXCR.300.RGB 300 12 (2.88W)

DFLEXCR.600.RGB 600 24 (5.76W)

DFLEXCR.1800.RGB 1800 72 (17.28W)

Flexyled RGB Cables - Interconnecting Cable Made in Italy to comply with Australian Standards

Connects between 2 lengths of Flexyled RGB Module

MultiPlug Connectors

Part No.

Length (L) mm

DFLEXCR.IC.100.RGB 100

DFLEXCR.IC.500.RGB 500


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Flexyled RGB Corner - Right


3 LED’s. Keeps LED spacing consistent at corners


12 Volt 0.72W

Compatible with the Flexyled RGB Modules (above)



Part No.

DFLEXCR.CNR.R.RGB

Flexyled RGB Corner - Left


3 LED’s. Keeps LED spacing consistent at corners


12 Volt 0.72W

Compatible with the Flexyled RGB Modules (above)



Part No.

DFLEXCR.CNR.L.RGB

Direction of power

Power supply end

Direction of power

Power supply end



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

72

Flexyled RGB Sequencer & Remote Controller

Sequencer/Driver to operate Flexyled RGB

12 Volt maximum 144W

Remote can control multiple sequencers

Not synchronisable in multi sequencer installations

Requires 12V dc LED driver as power supply. (See page 73).

Part No.

DFLEXCR.SEQ.RGB


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

2000


Flexyled RGB Cables - Power Supply

Connects power from Flexyled RGB Sequencer to Flexyled RGB Modules

1 Power supply cable required for each run of Flexyled RGB Strip

2m long with MultiPlug and Micro RGB connectors

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB modules

Part No.

DFLEXCR.PS.RGB

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W

DSNP75.12 75W

LED Driver Capacity

15W - Suitable for up to 1.2 lineal metres of Flexyled RGB

30W - Suitable for up to 3 lineal metres of Flexyled RGB

75W - Suitable for up to 7.5 lineal metres of Flexyled RGB

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

ProfileCollectionLinearrecessedandsurfacemountedprofileswithsymmetricalprojection

Materials:

Aluminium with polycarbonate diffuser

Finishes:

Naturallyanodized

Light Sources:

FLEXYLED CR

Installation:

Milled groove or surface with concealed clips

DOMUS Line’s PROFILE collection comprises a range of 4 different

profileswhichcaneasilybecuttolengthtosuitanyapplication.

The FLEXYLED range used as a light source, along with end-caps

andconcealedfixingclipscombinetocreatearageofstylishlinear

lighting which is truly versatile. Sensor switches and dimmers are also

availableinversionstomatchboththeDIVAandTWIGprofiles.

(See SENSOR collection pages 96-99).

Diva

Twig

String

Toucan

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

ProfileCollection

Diva

Toucan

String

Twig


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

76

Diva


Recessedtypeprofileonly(lightsourcemustbeorderedseparately. See page 58).

Supplied in 3 metre lengths only

Can be easily cut to length

FLEXYLED CR can be used as a light source. Strip modules, corners and connectorsallfitwithintheprofile

Part No.

Description Finish

A DDP.3M Profile3metre ALU

B DSL.DP Diffuser 3 metre TR

C DDP.EC End cap GY

Twig


SurfaceMounttypeprofileonly(lightsourcemustbeorderedseparately. See page 58).




Part No.

Description Finish

A DTP.3M Profile3metre ALU

B DSL.DP Diffuser 3 metre TR

C DTP.EC End cap GY

D DTP.MC Fixing Clip -

ProfileCollection

Stopped groove installation

Surface mounted installation

Through groove installation

DIVA is installed via recessed mounting, into

a slot with a depth of 12mm and a width of

14.5mm. The front edges protrude slightly

to cleverly conceal the edges of the recess,

givingacleanfinish.

TWIG is installed on the supporting surface

with the help of concealed clips.

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

String


RecessedtypeDiffuserprofileonly(lightsourcemustbeorderedseparately. See page 58).



Aluminiumstripclipsintothebackofthediffuserprofile.Suitablelightsourcecan then be fed into the gap between the Aluminium strip and the diffuser. Diffuserprofilecanthenbepushedintothepre-cutgroove.


Part No.

Description Finish

A DST.DP Diffuserprofile3metre TR

B DST.BP Aluminium strip 3 metre ALU

Toucan


ABSPlasticprofileonly(lightsourcemustbeorderedseparately. See page 58).

Suits 6 - 8mm glass shelves


Aluminiumcolouredfinish



Part No.

Description Finish

A DTN.2000 Profile2metre ALU

B DTN.LS LED Support 1 metre ALU

STRINGisflushinstalledinthroughmilled

grooves that is only 9mm deep and

12mmwide.Themilledprojectionprofileof

only 0.8mm, allows it to be installed without

further machining, even on the sides of

cabinets and hanging kitchen cupboards

fittedwithshelves.

TOUCAN is installed using pressure to attach

it to 6mm and 8mm shelves. Applied to

frosted glass shelves, it creates a lighting

effect diffused across the entire surface.

Applied to transparent glass shelves, it lights

the front edge. LED strip with IP44 protection

is highly recommended.

A

B

A

B

9

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.



V

SkylineArchitecturalfixturesforaccentlighting

Materials:

Aluminium

Finishes:

Naturallyanodized

Light sources:

Standard LED module

Installation:

To be integrated in milled groove


SKYLINEisbothaprofileforthebottomofhandlelesswallcabinets

andaLEDlightprofile.Integratingseamlesslyintocabinetswitha

bottom panel thickness of 18mm and side panel thickness of 16mm,

thisinnovativeprofileisavailableinfourpopularlengthstosuitmost

top cupboard applications. An innovative clip fastening system allows

foreasyinstallationandmaintenanceoftheSKYLINEprofileeven

after the cabinets have been installed. Fitted with the high quality

LEDstripFLEXYLEDCR,theSKYLINEprofileisaperfectcompanion

to kickboard and under bench strip lighting.

TheSKYLINETLDMprofileincludestheoptionofanintegrated

multi-function TouchLED dimmer switch for under cabinet


whichsimultaneouslycontrolsallotherSKYLINEprofilesorLED

‘slave’lightsconnectedtoit.TheSKYLINEprofileispatented.

SKYLINEprofileissuppliedin2mlengthsreadyforyourcustom

length requirements.

Skyline TLDM

SkylineProfile

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Skyline


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

80



Power supply

Finishes Anodised aluminium (ALU)





Skyline

* Illuminance’s levels of model SKYLINE 1163mm








































© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

SKYLINE Installation Details

SKYLINE is installed on the bottom panel of

wall cabinets. The bottom panel is cut back

by at least 24mm and slotted 3.8mm wide and

10-15mmdeeptoacceptthefixingprofile.

The power cord which is 4 metres long

(for TLDM) and equipped with MiniPlug

Connectors can be run either through a

central hole of at least 10mm diameter or

a groove only 2mm x 4mm in the end of

the bottom panel. SKYLINE is designed for

cabinets with a bottom panel thickness of

18mm and carcase side thickness of 16mm.

Innovative Fixing System

SKYLINEhasaconcealedfixingsystem

wherethebaseprofileisinsertedintothe

pre-preparedgrooveandthelightingprofile

simply clips onto the base. This allows for fast

installation and easy removal in the rare event

that this becomes necessary.

SKYLINEprofileisavailablein2versions;

SKYLINETLDM–MasterorSKYLINEprofile.

SKYLINE TLDM incorporates a multi-function





connected to it.

The output cable of the SKYLINE


of 30W @ 12V dc including the

loadofthemasterfitting.OneSKYLINETLDM

can control up to a total of 6 lineal metres of

SKYLINEprofile.Pleaseensurepowersupply

hassufficientcapacitytosupplyallthe

lightfittings.

Groove for lateral side cable exit



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

82

Skyline TLDM - Master


Integrated master touch dimmer switch with night light feature (maximum load 30W)

Can be used as a stand alone unit

CombinedHandle/Striplightprofilefortopcupboards

12 Volt, 4.75W per metre


Fitting only (LED driver must be ordered separately)

Skyline-Profile


AluminiumProfileonly.(No light source included. Suitable light source such as FLEXYLED CR must be purchase separately. See page 58).

Backprofilenotnecessaryforentirelengthoffrontprofile

Fixingclipsarerecommendedatleast4pcspermetreofSKYLINEprofile

DiffuserprofileiscompatiblewithDIVAandTWIGprofiles

Skyline

Part No.

Light Colour

Cabinet Width mm

Power Finish

DSKYMST.417.NW Natural White 450 1.92W ALU




Part No.

Description Length m

Finish

DSKYF.2000 FrontProfile 2 ALU

DSKYB.2000 BackProfile 2 ALU

DSL.DP DiffuserProfile 3 TR

DSKY.MC Fixing Clip (pack of 4 pieces) -

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers




Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W

DSNP75.12 75W

LED Driver Capacity

15W - Suitable for up to 3 lineal metres of Skyline



Note: Skyline TLDM maximum load is 30W


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

84


GocciaProfileDesign Giuseppe Bavuso 2011

Architecturalfixtureswithsymmetricalprojection

Materials: Aluminium

Finishes: Naturallyanodized

Light sources: Flexyled CR (must be ordered separately)

Installation: Lyingflat


GOCCIAisbothawardrobehangingrodandanilluminationprofile.

The collection, designed by renowned Italian designer Giuseppe

Bavuso, is a balance of performance and aesthetic features. The

minimal design concentrates on the contemporary and on purity of

shapes that are inspired from water as a primary element of nature.

The end pillars and the housing for the LED strip have had particular

attentionpaidtotheirdesigndetails.TheGOCCIAfixtureisalso

equippedwithatransparentPVCprofileonwhichtheclotheshanger

restseliminatingdirectmechanicalshockonthealuminiumprofile.

GOCCIA is designed to be installed in wardrobes but it can also be

installed under shelves in walk-in closets. GOCCIA is supplied as an

extrusionwhichcanbecuttolengthandfittedwithyourfavourite

LED strip lighting such as the FLEXYLED CR range. End pillars are

supplied separately and are uniquely designed to allow fast and fool

proof installation of the wiring. Design patents pending.

GocciaProfile

C

E

OA

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


GocciaProfile

12V


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

86



Power supply (when using Flexyled CR)

Finishes AnodizedAluminium(ALU)

GocciaProfile






Details shown for Flexyled CR

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Installation

GOCCIA is installed hanging vertically and

anchored to the shelf with metric machine

screws through the shelf. When using

FLEXYLED CR as a light source, the power

supply cord can be run through the shelf

through a hole with a diameter of at least 8mm.

The cap of the lateral heads can be removed to

allow easy positioning of the cable. The overall

idea of the collection has been aimed towards

the most common wardrobes with hinged,

sliding or coplanar doors.

Profile2m(DGC.2M.ALU)

End Pillars (pair) (DGC.EP.ALU)

Diffuser 2m (DGC.DP.TR)

Hanger Protection Strip (DGC.HP.CL)

Weight Carrying Capacity

GOCCIA has a load rating of approximately

15kg per lineal metre, dependant on the

security and stability of the surface that it is

fixedto.

Extrusion Cutting Information

Extrusion length (E) = Overall length (OA) – 44mm

Extrusion length (E) = Centres (C) – 8mmE

C

OA


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

88

GocciaProfile


Illuminatedhangingrailprofile.(Profileonly,lightsourcemustbeorderedseparately. Use Flexyled CR.)

EndpillarsfixthroughtheshelfwithM6bolts

Can be cut to the length required

Plasticstripontopofprofiletoreducescratchingfromcoathangers

Ends caps easily removeable to allow for insertion of LED strip and cables

Maximum load 15kg per metre

Part No.

Description Finish

DGC.2M Profile2metre ALU

DGC.DP Diffuser 2 metre TR

DGC.HP Hanger Protection Strip 2 metre CL

DGC.EP End pillars (pair) ALU

Flexyled CR Modules Made in Italy to comply with Australian Standards



60 LED’s per metre

12 Volt

4.8W per metre

A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules. (See below).

LED strip only. Power supply cable must be ordered separately. (See below).

For a full range of FLEXYLED CR please see pg 56

Flexyled CR - Power Supply Cable

Connects power from LED driver to Flexyled Strip

1 Power supply cable required for each run of Flexyled Strip

2m long with MiniPlug and CR Connectors

Part No.

DFLEXCR.PS

GocciaProfile

C

E

OAE = OA - 44mmE = C - 8mm

Part No.

Light Colour

Length mm

LED’s (Watt)









2000

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V




Part No.

Length (L) m

DEXTMP.1M 1 metre

DEXTMP.2M 2 metre




Part No.

DMP12.DIS

12V dc LED Drivers (when using FLEXYLED CR)




Part No.

Maximum Wattage

DSNP15.12 15W

DSNP30.12 30W

DSNP75.12 75W

LED Driver Capacity

15W - Suitable for up to 3 lineal metres of FLEXYLED CR




© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

90

IR SensorIR Sensor is a dual function electronic proximity

switch for the control of all DOMUS Line

12V dc LED lighting. This multi-purpose switch

operates at 12V dc so is therefore safe and

easy to install, and can be used as either a

non-contact on/off switch or as a door switch.

IR Sensor can be either surface mounted or

recessed into a 14mm diameter hole. A 2 metre

long power cable with MiniPlug Connectors and

a distributor block with provision for connection

of 11 devices (maximum load is 15W @ 12V dc)

are provided as standard. IR Sensor must be

connected in line between the power supply

andtheLEDfittings.

On-off switch set up (delivered as standard)

Proximity/Door switch set up

Built-in installationSurface installation

IR set-up example

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

IR Sensor

Operates at 12 Volt

Maximum load 15W @12V dc

Dual mode, on/off or proximity/door switch

MiniPlug Connectors

Supplied with 1 distributor block for connection of up to 11 lights

Part No.

DIR1224

The IR MK2 sensor is supplied from the

factory in the non-contact on/off switch mode.

To turn on/off the switch simply move your hand

to within 50mm of the sensor head and the

connected load will turn on or off.

If the IR MK2 sensor is required to be used as

a door switch, hold down the ‘set up switch’

(ontheflatsideofthesensorbody)witha

small blunt object. Hold for a minimum of

3 seconds and release. The sensor will now be

in proximity/door mode and can be used as a

door switch. The sensor will now turn off the

connected load whenever an object (e.g. a door

orflap)moveswithin50mmofthefrontofthe

sensor head, and turn the connected load back

on when the object moves away.

To change the IR MK2 sensor back to on/off

mode hold down the ‘set up switch’ for a

minimum of 3 seconds. As IR MK2 is an optical

type sensor, for optimum performance avoid

theuseofbrightwhite,reflectiveormirror

type objects.

Dual Mode Operation


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

92

IR MK2 Sensor The all new IR MK2 sensor is a dual mode

electronic proximity switch for the control of

all DOMUS Line 12V dc LED lighting with a

removable sensor head that can be located up

to 2m away from the sensor body. This multi-

purpose switch operates at 12V dc so is therefore

safe and easy to install, and can be used as either

a non-contact on/off switch or as a door switch.

The IR MK2 sensor head is easily recessed into a

13mm diameter hole and has an outside diameter

of only 14mm. A 2 metre long power cable with

MiniPlug connectors and a distributor block with

provision for connection of 11 devices (maximum

load is 15W @ 12V dc) are provided as standard.

IR MK2 must be connected in line between the

powersupplyandtheLEDfittings.

On-off switch set up (delivered as standard)

Move your hand not less than 50mm from the sensor

Proximity/Door switch set up

IR set-up example

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

IR MK2 Sensor

Operates at 12 Volt


Dual mode, on/off or proximity/door switch

Removable sensor head with 2m cable

MiniPlug Connectors

Supplied with 1 distributor block for connection of up to 11 lights

Part No.

DIRMK2.12

The IR MK2 sensor is supplied from the

factory in the non-contact on/off switch mode.

To turn on/off the switch simply move your hand

to within 50mm of the sensor head and the

connected load will turn on or off.

If the IR MK2 sensor is required to be used as

a door switch, hold down the ‘set up switch’

(ontheflatsideofthesensorbody)witha

small blunt object. Hold for a minimum of

3 seconds and release. The sensor will now be

in proximity/door mode and can be used as a

door switch. The sensor will now turn off the

connected load whenever an object (e.g. a door

orflap)moveswithin50mmofthefrontofthe

sensor head, and turn the connected load back

on when the object moves away.

To change the IR MK2 sensor back to on/off

mode hold down the ‘set up switch’ for a

minimum of 3 seconds. As IR MK2 is an optical

type sensor, for optimum performance avoid

theuseofbrightwhite,reflectiveormirror

type objects.

Dual Mode Operation


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

94

Capsens V13 SensorCAPSENS V13 is a new cutting edge electronic

capacitive sensor designed to be totally

concealed behind most non-metallic materials

including wood, plastic, glass and many other

opaque or transparent materials. It operates at

12V dc so is therefore safe and easy to install

and can switch up to 11 connected 12V dc LED

fittingupto30Wmaximum.

The CAPSENS V13 switch is operated by

lightly touching the surface of the material over

the position where the sensor is concealed.

Supplied with 2 metre power and switch cables

with MiniPlug connectors and a distribution

block, CAPSENS is truly the way forward in

12V dc LED control. CAPSENS V13 must be


andtheLEDfittings.

To operate the CAPSENS V13 switch, touch

the area of the surface directly over where the

sensor is concealed. It is possible to adjust the

intensity of the connected LED lights by holding

afingeronthe‘activationarea’.Abriefflashof

theLEDfittingconnectedtotheCAPSENSV13

indicates that maximum brightness has been

reached.Thebrightnesslevelwillbememorized

until the next adjustment.

The ‘activation’ area is about 50mm diameter

and the maximum thickness of the material

on which CAPSENS is installed must not be

more than 30mm for wood, 12mm for glass or

20mm for plastic. CAPSENS also integrates the

functions ‘soft-start’ and ‘soft-stop’ and will

automatically turn off after about 18 hours.

A further feature of the CAPSENS V13 is

‘auto-on’ that automatically turns on the

connectedLEDfittingsatthepreviouslyset

luminosity. This function is especially useful for

the automatic turning on of a collection of

Lights for example in a show room.

When the main switches are turned on, the

LED lighting will activate at their various pre-set

brightness’s without having to adjust all the

levels individually.

*This data is indicative of the sensitivity of CAPSENS V13 and

can increase or decrease dependant on the composition of

the material to which the sensor is applied. CASPSENS V13

cannot be installed on or behind metalic surfaces and for

other materials such as granite, marble and composites it is

recommended that a preliminary test is carried out before

finalinstallation.

30mm

12mm

20mm

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

Capsens V13 Sensor

Total concealed touch switch

Operates at 12 Volt


Supplied with distributor block allowing 11 lights to be connected

2m input and 2m output cables with MiniPlug Connectors

Part No.

DCAPSENS

Capsens set-up example


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

96

IFR SensorThe IFR Sensor is an electronic infrared sensor

switch for use with the DOMUS Line range of

12V dc LED lighting. The switch itself operates

on 12V dc which makes it quick and safe to

install.IFRSensorisavailableintwoversions;

it can be surface mounted with concealed clips

(IFR V12), or recessed into an 11mm deep

recess (IFR V13). A 2 metre long power cable

with MiniPlug connectors and a distributor block

with provision for connection of 11 devices

(maximum load is 30W @ 12V dc) are provided

as standard. IFR Sensor must be connected in

line between the power supply and the

LEDfittings.

IFR Sensor is an infrared sensor. The sensor

detects changes in temperature associated

with the movement of people and animals

(approximately 36°C as shown in the diagram).

Whenthesensorisactivated,thefixtureis

turned on. The system remains on for 30

seconds. After this, if it does not detect other

movements, it turns off automatically. For ideal

operating conditions, the IFR Sensor must be

installed out of direct sunlight and away from

sources of heat and electromagnetic radiation.

IFR set-up example

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

IFR V13 Sensor

MatchesDivaprofile

Infra-red sensor switch

Operates at 12V dc


Supplied with distributor block with provision for connection of 11 lights with MiniPlug Connectors


Part No.

Finish

DIFR.V13 ALU

IFR V12 Sensor

MatchesTwigprofile


Operates at 12V dc




Part No.

Finish

DIFR.V12 ALU


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

98

TLD SensorTLD Sensor is the latest in multi-function

switches for LED lighting. Operating at 12V dc

with a maximum load of 30w, it is available in

twoversions;itcanbesurfacemountedwith

concealed clips (TLD V12), or recessed into an

11mm deep recess (TLD V13). A 2 metre long

power cable with MiniPlug connectors and a

distributor block with provision for connection

of 11 devices (maximum load is 30W @ 12V dc)

are provided as standard. TLD Sensor must be


andtheLEDfittings.


to the TLD Sensor is carried out with the

single touch of the LED on the TLD Sensor.







function which activates only when the

devices are switched off. In a daylight or bright

environment, the LED on the TLD Sensor

glows with a soft dim light. With low or no light,

the brightness of the LED increases providing

a handy ‘night-light’ function. The ‘night-light’


holdingafingerontheTLDSensorfor

15 seconds after which, the deactivation of

thefunctionwillbenotifiedby2slowflashesof






that automatically turns on the connected

LEDfittingsatthepreviouslysetluminosity.

This function is especially useful for the

automatic turning on of a collection of

Lights for example in a show room. When the

main light switches are turned on, the detail

lighting will activate at their various pre-set

brightness without having to adjust all the

levels individually.

TLD set-up example

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


12V

TLD V13 Sensor

MatchesDivaprofile

Touch dimmer switch with unique night-light feature

Operates at 12V dc




Part No.

Finish

DTLD.V13 ALU

TLD V12 Sensor

MatchesTwigprofile

Touch dimmer switch with unique night-light feature


Operates at 12V dc




Part No.

Finish

DTLD.V12 ALU


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


0mA

100


Pixel CollectionProfessionalfixturesforaccentlighting

Materials:

Brass

Finishes:

polished chrome, satin nickel

Light sources:

HP module LED

Installation:

Flush and surface

ThePIXELcollectionofferstheadvantagesofhighlightingefficiency

thanks to the High Power LED light, combined with a professional

polymer lens prism that pilots and diffuses the light uniformly without

shadows and smudges. The spotlight has a minimal visual impact

and a small installation depth of only 13mm. It is made of brass with

protectiveandhighqualityfinishesthataresuretoendurethetest

of time. Also available are spacers for surface installation and for

installation on walls with an inclination of the light module that ensures

uniform projection on the work surface and to assist in hiding the

power cable. Now available in the new Natural White light.

All PIXEL LEDs must be powered by a 350mA power supply of

sufficientcapacity.

Pixel V13

Pixel SP

Pixel OB

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Pixel Collection

350mA


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


0mA

102

Housing Brass

Optic 40°

Power supply

Finishes Polished Chrome (CP)

Satin Nickel (SN)

Pixel Collection


Colour Temperature 3000 Kelvin




Colour Temperature 4000 Kelvin



© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


350mA

PIXELV13isauniversalfixture.Itcanbeinstalledeitherflushinathroughhole(A),flushinablindholeofatleast13mmdepth(B)orin

metal sheet with a minimum thickness of 0.8mm (C). The fastening system is quick, does not require tools, and uses a lateral pressure

harmonicsteelspring.The2metrelongpowercableisfittedwithBUSconnectors.AllPIXELLEDfittingsmustbewiredinseriesand

powered by a 350mA power supply.

Surface Installation

TwotypesofspacersallowforsurfaceinstallationofPIXEL.TheSPversionensuressymmetricprojection;whereastheOBversion

withasymmetricprojectionletsyouinstallthefixtureonaverticalwall,allowingyoutoeasilyhidethecablebehindthecabinet.

The 20° angle ensures uniform lighting from the top.

Pixel SP V13

Pixel OB V13

A Recessed installation with side pressure springs on wood panels

B Recessed installation with side pressure springs on wood panels

C Recessed installation with side pressure springs on metal panels

Flush Mounted Installation


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


0mA

104

Pixel V13


High power 1.2W LED

350mA

2m cable with BUS connector

Solid brass housing

Highefficiencyopticsgivinga40°beamangle

Available in Chrome Plated or Satin Nickel

Flush mounted or use spacers below

Fitting only. (For LED drivers see page 105).

Part No.

Light Colour

Finish

DPX.WW Warm White CP, SN

DPX.NW Natural White CP, SN

Pixel SP Spacer


Spacer for surface mounting of Pixel V13 lights only. (Light must be ordered separately above).

Part No.

Finish

DPXSP CP, SN

Pixel OB Spacer


Spacer for angled surface mounting of Pixel V13 lights only. (Light must be ordered separately above).

Part No.

Finish

DPXOB CP, SN

Pixel Collection

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


350mA

Extension Cable - BUS Connector

Use for extending cables with BUS Connectors

This cable should be kept to the minimum practical length possible and must not exceed 6m total length to avoid voltage drop

Part No.

Length (L) m

DEXTHP.1M 1 metre

DEXTHP.2M 2 metre

BUS Connector - Jumper Wires

Replacement jumper wires for 350mA system

Part No.

D350JW

350mA LED Drivers



Supplied with BUS jumper wires and terminal block

Part No.

Maximum Wattage

DSNP6.350 6W

DSNP15.350 15W

350mA LED Driver Capacity

6W - Suitable for 1 - 6 Pixel V09 lights 15W - Suitable for 6 - 12 Pixel V09 lights


© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


V

106

LED Drivers

350m

A

12V LED Drivers


2m Power lead

Distribution block with 12 MiniPlug Socket distributor block connected

Part No.

Maximum Wattage

Driver Body Size L x W x H mm

DSNP15.12 15W 120 x 45 x 20

DSNP30.12 30W 160 x 55 x 20

DSNP75.12 75W 200 x 60 x 30

12V dc - 350mA MiniConverter

Converts350mALEDfittingstooperateon12Vdc

Maximum load 7.2W

Can be used in a circuit with Domus Line switches which do not have a dimming function

Part No.

DMC12.350

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


350mA

350mA

350mA LED Drivers


2m Power lead

Distribution block with 6 BUS connectors and 5 BUS Jumper wires

Part No.

Maximum Wattage

Driver Body Size L x W x H mm

DSNP6.350 6W 100 x 45 x 10

DSNP15.350 15W 120 x 45 x 20

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


1. Dimensions

The dimensions of the drawings published in this catalogue are given in

millimeters for standard models.

2. Photometry

Thevaluesofcolourtemperature,luminousefficiencyandcolourrendering

index correspond to the nominal values provided by the manufacturers of light

sources (LED chips).

Furnware assumes no responsibility for any errors or inaccuracies in those.

Data related to luminance diagrams is indicative and the values corresponding

to the linear devices are referred to the model of greatest length published.

3. Colours and Finishes

Thefinishesandcolourspublishedinthiscatalogueareapproximateand

subjecttotechnicalchangesrelatedtothespecificproductionprocessesof

surface treatment (such as paint, anodising, galvanising, metallisation, etc..).

Furnwarerecommendsthatyoufirstchecktheproductsamplebeforemaking

your purchase.

4. Photos and Images

The images of the locations of the products are simulations and do not provide

exclusive instructions for use and/or installation of same. In addition to that,

because of the variables between the photographic development and printing

processes, colours and shapes may differ from that of the original products.

1

2

3

4


Technical Information

© C

opyr

ight

201

4 A

ll R

ight

s R

eser

ved.

Pric

es &

spe

cific

atio

ns s

ubje

ct to

cha

nge

with

out n

otic

e.


Warranty

Each unit is fully guaranteed for a period of 12 months from the date of delivery.

From the warranty are excluded all defects caused by force majeure (lightning,

fire,etc..),aswellasanydamagecausedbyimproperuseofequipment.

The products must be installed and/or used in accordance with the

specificationsandinstructionsgivenbyFurnware.Theymustalsobeinstalled

and/or used in compliance with the provisions governing the installation

and/or use of electric material force in the country where the products are

installed and/or used. To this end, the buyer expressly releases Furnware from

any responsibility for improper use, failure to comply with safety standards,

technicalspecificationsandinstructionsforuse.Thewarrantyisvoidwithout

fail in the event of tampering with the equipment by persons or technicians not

specificallyauthorizedbyFurnware.Thewarrantydoesnotcovernormalwear

and tear or the consequences of improper installation, nor the failure

and/or breaks caused by inexperience and/or neglect.

RCM supplier code: 5661

UNIENISO9001:2008companycertified

Member of the Italian Electrotechnical Committee

Member of the ECOLIGHT

Member of the Confederation of Italian Industry

Phone 02 9548 4888

Free Call 1800 101 009

Fax 02 9548 6191

Email [email protected]

Website www.furnware.net.au

Postal PO Box 250 Engadine, NSW 2233

Head Office 18 Burns Road Heathcote, NSW 2233

Distribution Centre 1-5 Jessica Place Prestons, NSW 2170

ABN 78 588 941 715FW16

4.08

.201

3

Documents

Furnware Lighting Product Selection 2014