View
227
Download
7
Embed Size (px)
DESCRIPTION
Vinten Radamec Robotic Camera Support Systems.
Citation preview
Robotic Camera Control Systems
The Fusion head has a 55kg payload, and can beused in either manual or robotic mode.
Continuing the manual and robotic capabilities of the Vinten Radamec range, the Fusion headutilises the award winning LF drag system used inthe Vector 70 providing familiar drag performancefor manual operators.
With the simple clutching mechanisms adoptedfrom the Radamec heads, the FH100 Fusion Headregains robotic control by remotely driving themechanical clutch.
The straightforward robust mechanical design andleading edge electronics development provide theperfect combination for a high performance head,both in flexibility and in accuracy.
www.vintenradamec.com
FUSION FH100ROBOTIC AND MANUAL HEADThe Fusion FH100 from VintenRadamec has been designed foruse as a standalone device or forseamless integration with theFusion FP145 robotic pedestal.
Key Features
� The only on shot performing manual androbotic pan and tilt head available in themarket
� Direct drive of all broadcast quality full servodigital lenses from Fujinon and Canon
� Additional mounting points for previewmonitors to further improve on shotperformance
DRIVING THE FUTURE
The integral lens drive has automatic configurationfor directly driving any full servo digital Canon orFujinon broadcast lens, increasing the operationalflexibility further.
Technical Specification
Height 520mm / 20.4”Width 225mm / 8.9”Length 404mm / 15.9”Weight 24.5kg / 49 lbsMaximum Payload 55kg / 125 lbsPan Range 359˚Manual To Robotic Changeover Mechanical clutch, driven return to roboticManual Drag System Lubricated Film as per Vector 70Maximum Speed – Pan/Tilt 60°/SecMinimum Speed – Pan/Tilt 0.1˚ /secondFixing Details 4 x M6 equally spaced on 84mm diameter
4 x M6 equally spaced on 3.3” diameterTripod Adaptor AvailableIntegral Power Supply Unit Autoranging 110-240V AC 50/60 HzMaximum Power - Peak 200 WattsPower IEC Type A connectorLens Control Outputs Direct to Canon or Fujinon Digital Full Servo lenses via 15 pin connector
to lens manufacturer standard
DRIVING THE FUTURE
Robotic Camera Control Systems
CHINAThe Vitec Group plc ChinaRoom 1806, Hua Bin Building,No. 8 Yong An Dong Li,Jian Guo Men Wai Ave,Chao Yang District,Beijing, P.R.China 100022t +86 10 8528 8748f +86 10 8528 8749
FRANCECamera Dynamics sarl171, Avenue des Grésillons92635 GENNEVILLIERS CedexFrancet +33 820 821 336f +33 825 826 181
GERMANYCamera Dynamics GmbHGebäude 16 Planiger Straße 3455543 Bad KreuznachGermanyt +49 671 / 483 43 30f +49 671 / 483 43 50
Camera Dynamics GmbHErfurter Straße 1685386 EchingGermanyt +49 89 / 321 58 200f +49 89 / 321 58 227
JAPANVinten Japan KKP.A. Bldg. 5F3-12-6 AobadaiMeguro-ku Tokyo 153-0042Japant +81 3 5456 4155f +81 3 5456 4156
SINGAPORECamera Dynamics Pte Ltd6 New Industrial Road,#02-02 Hoe Huat IndustrialBuilding, Singapore 536199t +65 6297 5776f +65 6297 5778
UKCamera Dynamics LtdWestern Way,Bury St Edmunds,Suffolk IP33 3TB, UKt +44 1284 752 121f +44 1284 750 560Sales Fax +44 1284 757 929
USACamera Dynamics Inc.709 Executive Blvd,Valley Cottage, NY 10989, USAt +1 845 268 0100f +1 845 268 0113Toll Free Sales 1 888 2 Vinten
The head contains its own power supply unit, allowing for mains tobe taken into the head, either from the pedestal, or directly fromthe studio supply.
The data cabling is standard IT category 6.
The head is compatible with the Vinten Radamec Control System.
Specifications and features subject to change without notice
© 2008 The Vitec Group plc ® Vinten Radamec Broadcast Robotics is a registered trademark of The Vitec Group plc