25ryan.chu@fwd.com.tw

朱志剛

Autotalks Craton (ATK4100) V2X communication processors(One ARM Cortex R4F and two Synopsys ARC 325D running at 240 MHz)

Autotalks Pluton (ARK3100) V2X RF transceiver

128 MB DDR3 and 32 MB NOR Flash

Infineon HSM SLE97 (Support over 2000 ECDSA256 verification per second)secure storage size (>3,000 certificates)

IEEE 802.11p 5.85-5.925 GHz, -91 dBm RX Sensitivity, channel width 10MHz/20MHz, Dual PHY and MAC for supporting concurrent dual channel operation

27 dBm max. (EIRP)

5.9GHz, 5dBi Omni x2

12/24 VDC

Telit SL869 High Performance GNSS module (refresh rate: 10Hz)

IEEE 802.11p-2010, IEEE 1609.2/D9.3, IEEE 1609.3-2010, IEEE 1609.4-2010, IEEE 1609.11; SAE J2735-2015; ETSI TS 102 637-2, ETSI TS 102 637-3, ETSI TS 102 636-5-1, ETSI TS 102 636-6-1, ETSI TS 102 636-4-1, ETSI ES 202-663, ETSI TS 103 097

Telnet

One Bluetooth w/ SPP

One 10/100 half-/full-duplex Ethernet One CAN bus 2.0 One RS232

180mm x 90mm x 90mm, 0.3kg 180mm x 90mm x 70mm, 0.2kg

IP66

Temperature: -40℃ ~ +85℃ Relative Humidity: Operation 10%~90%, Storage 5%~95%, non-condensing

FWCU 6.0C

FORWARD WAVE COMMUNICATION UNIT(FWCU) OBU 6.0A/B

Description:

Features:Support Real-Time Operating System (ThreadX) Support Autotalks SoC solutionSupport IEEE 802.11p & IEEE 1609 compliant WAVE/DSRC protocol stackSupport ETSI TC ITS CAM, DENM, BTP, GN6, GN, ITS-G5A compliant protocol stackSupport SAE J2735 Basic Safety Messages (BSM)

FWC U 6.0A

FWC U 6.0B

Support two mounting method, FWCU OBU 6.0A via Adhesive Bottom, FWCU OBU 6.0B via Bolt MountSupport V2X Safety ApplicationsProvide SDK tools and documentationAll protocol stacks complied with MISRA C 2012

Specification:FWCU Version FWCU OBU 6.0A FWCU OBU 6.0B

Processor Autotalks Craton (ATK4100) V2X communication processors

(One ARM Cortex R4F and two Synopsys ARC 625D running at 240MHz)

RF transceiver Autotalks Pluton (ARK3100) V2X RF transceiver

System Memory 128 MB DDR3 and 32 MB NOR Flash

HSM Infineon HSM SLE97 (Support over 2000 ECDSA256 verification per second) secure storage size (>3,000 certificates)

DSRC Radio IEEE 802.11p 5.85-5.925 GHz, -91 dBm RX Sensitivity, channel width 10MHz/20MHz, Dual PHY and MAC for supporting concurrent dual channel operation

DSRC Radio TX Power 27 dBm max. (EIRP)

Antenna 5.9GHz, 5dBi Omni x2

Power Type 12/24 VDC

GPS Telit SL869 High Performance GNSS module (refresh rate: 10Hz)

Environment Temperature: -40℃ ~ +85℃ Relative Humidity: Operation 10%~90%, Storage 5%~95%, non-condensing

NMEA Standard NMEA 0183

Standards Compliance

IEEE 802.11p-2010, IEEE 1609.2/D9.3, IEEE 1609.3-2010, IEEE 1609.4-2010, IEEE 1609.11; SAE J2735-2015; ETSI TS 102 637-2, ETSI TS 102 637-3, ETSI TS 102 636-5-1, ETSI TS 102 636-6-1, ETSI TS 102 636-4-1, ETSI ES 202-663, ETSI TS 103 097

Operating System ThreadX

System Services Telnet

Interfaces One Bluetooth w/ SPP

Water Proof IP66

One 10/100 half-/full-duplex Ethernet One CAN bus 2.0 One RS232

Dimensions & Weight 180mm x 90mm x 70mm, 0.2kg 180mm x 90mm x 90mm, 0.3kg

Contact: Ryan Chu

Phone: 886-2-2673-0411 Ext.325Email: ryan.chu@fwd.com.tw

FWCU 6.0C

Forward company’s WAVE/DSRC Communication Unit (FWCU) is an integrated wireless communication system designed for deploying Intelligent Transportation Systems (ITS) applications and improving traffic safety on the roadways. FWCU OBU 6.0 is a WAVE/DSRC communication equipment mounted on a vehicle as shark fin antenna.

It supports automotive grade operating temperature range from -40℃ to +85℃. The FWCUis compliant with IEEE 802.11p and IEEE 1609, known as the WAVE/DSRC standards and alsoETSI Europe ITS standards. With these capabilities, it can support many different types of communication including intra-vehicle, vehicle-to-vehicle (V2V), vehicle-to-roadside (V2R).

The FWCU also provides software development kit (SDK). Using the SDK tools, many ITS applications can be developed easily on this flexible open platform.

The FWCU satisfies all things the next-generation ITS communication needs.