g Me Supply Fall Catalog 2012

HARNESSES 4-9

RESCUE 40-41

SAFETY WEAR 22-27

TRAFFIC SAFETY 52-53

CARABINERS & HARDWARE 14-17

INDUSTRY 44-49

BAGS & BUCKETS 32-37

LANYARDS 10-13

INDUSTRIAL COATINGS 42-43

RIGGING 28-31

MISCELLANEOUS 54-59

ROPE & LIFELINES 18-21

APPAREL 50-51

TOOLS 38-39

\

(800) 940-6762 WWW. G M E S U P P LY. C O M GME SUPPLY CO // 3

TABLE OF CONTENTS

GME Supply Company is your complete source for fall protection equipment, communications infrastructures, hard-to-find industrial supplies, safety wear, professional tools, rigging, industrial coatings, and all related products for commercial and industrial needs.

We combine industry knowledge with professional experience that allows us to understand the specialized needs of your company and provide custom solutions. GME Supply Company is your trusted resource for dependable advice and superior service.

For more information about our company or products please contact one of our friendly account representatives.

NOTICE: All trademarks contained within are the property of their respective owners. We are not responsible for typographical or photographic errors. Prices are subject to change without notice.© 2012 GME Supply Co. All rights reserved.

www.gmesupply.comPhone: (800) 940-6762 | Fax: (888) 511-0457Distribution Warehouses:Alabama, California, Iowa, Minnesota, Missouri, Nevada, New York, Utah

Corporate Office:1805 Burlington St, Columbia, MO 65202

Proud supporters of

Supply Co

1110300 $39899

DBI SALAEXOFIT XP TOWER CLIMBING HARNESSFront and back D-rings, belt with back pad and side D-rings, removable seat sling with positioning D-rings, quick- connect buckles.

1110300 SM - $398.991110301 MD - $398.991110302 LG - $398.991110303 XL - $398.99

1108650 $35999

DBI SALAEXOFIT TOWER CLIMBING HARNESSFront and back D-rings, belt with back pad and side D-rings, removable seat sling with positioning D-rings, quick-connect buckles.

1108650 SM - $359.991108651 MD - $359.991108652 LG - $359.991108653 XL - $359.99

1113190 $48999

DBI SALA EXOFIT NEX TOWER CLIMBING HARNESSAluminum front, back and side D-rings, locking quick-connect buckles, sewn-in hip pad and belt, removable seat sling with positioning D-rings.

1113190 SM - $489.991113191 MD - $489.991113192 LG - $489.991113193 XL - $489.99

HARNESSES // TOWER CLIMBING

1103350$23579

DELTA II CROSSOVER TOWER CLIMBING HARNESSCross-over style, front D-ring, belt with 4” wide pad and side D-rings, two tool pouch D-rings, seat sling with positioning D-rings, tongue buckle leg straps.

1103355 SM - $235.791103351 MD - $235.791103350 LG - $235.791103352 XL - $235.79

1107775 $23889

DELTA II TOWER CLIMBING HARNESSVest-style, front and back D-rings, belt with 4” wide pad and side D-rings, two tool pouch D-rings, seat sling with positioning D-rings, tongue buckle legs straps.

1107776 SM - $238.891107777 MD - $238.891107775 LG - $238.891107778 XL - $238.89

RDTSL-QC-BPD$29489

MILLERREVOLUTIONTOWER CLIMBING HARNESSSpecially designed harness suspension loops for great-er mobility, quick-connect buckles, side D-rings, removable tool belt with padding, DualTech web-bing 40% stronger than ANSI standard, ErgoArmor back shield, self-contained label pack.

4 \\ GME SUPPLY CO WWW. G M E S U P P LY. C O M (800) 940-6762

67601 $29999

ELK RIVER PEREGRINE PLATINUM TOWER CLIMBING HARNESSOne 70° aluminum D-ring on back, two aluminum D-rings on hips and seat strap, one steel D-ring on chest, quick-connect chest and leg straps, breathable padding, lanyard parks, fall indicators, removable tool belt, removable aluminum bar in seat, carry-all bag.

67601 SM - $299.9967602 MD - $299.9967603 LG - $299.9967604 XL - $299.99

Tongue buckle legs straps.

67611 SM - $299.9967612 MD - $299.9967613 LG - $299.9967614 XL - $299.99

66611 $22999

ELK RIVER EAGLETOWER HARNESSSix steel D-rings located on back, chest, hips, and seat strap, lanyard parks, shoulder pads, quick-connect chest strap, tongue buckle leg straps, removable tool belt with padded back pad, 45” seat strap, carry-all bag.

66611 SM - $229.9966612 MD - $229.9966613 LG - $229.9966614 XL - $229.99

Removable aluminum bar in seat.

66621 SM - $247.9566622 MD - $247.9566623 LG - $247.9566624 XL - $247.95

68601 $29499

ELK RIVER PINNACLE TOWERCLIMBING HARNESSSix steel D-rings located on back, chest, hips, and seat strap, lanyard parks, shoulder pads, quick-connect chest and leg straps, fully integrated energy-absorber, adjustable seat with removable aluminum bar, removable tool belt, lanyard parks.

68601 SM - $294.9968602 MD - $294.9968603 LG - $294.9968604 XL - $294.99

Aluminum D-rings at back, hips, and seat strap.

68611 SM - $349.7568612 MD - $349.7568613 LG - $349.7568614 XL - $349.75

56422$9859

ELK RIVERTOWERMATE LE HARNESSFour steel D-rings located at back, chest, and hips, quick-connect chest strap, mating buckle leg straps, lanyard parks.

56422 SM/LG - $98.5956424 LG/XL - $98.59

Two steel D-rings located at back and chest.

56222 SM/LG - $82.4956224 LG/XL - $82.49

7084$32999

FALLTECHTOWER CLIMBERHARNESSRemovable saddle seat with padding and 4-point adjustability, ComforTech waist pad, removable shoulder and thigh pads, tongue buckle belt and leg adjustments, quick-connect chest strap,six D-rings.

SM - $329.99MD - $329.99LG - $329.99XL - $329.99

10048344$33499

MSA TECHNACURVTOWER CLIMBINGHARNESSQwik-Fit chest strap, secure-fit leg straps, saddle, shoulder pads, sub-pelvic pad, back D-ring, chest D-ring, hip D-rings.

10048344 Standard - $334.9910048345 XL - $334.99

TOWER CLIMBING \\ HARNESSES


HARNESSES // CONSTRUCTION

1101655 $15369

DELTA IICONSTRUCTION HARNESSVest-style harness, back and side D-rings, belt with sewn-in hip pad, shoulder pads, tongue-buckle leg straps, water repellent webbing, lanyard parks, vertical torso adjuster, no tangle design, built-in impact indicators.

1102201 SM - $153.691101654 MD - $153.691101655 LG - $153.691101656 XL - $153.69

1191209 $7235

PROTECTA PROCONSTRUCTION STYLE HARNESSBack and side D-rings, hip pad and belt, tongue buckle leg straps, 420 lb capacity, built-in impact indicator, light-weight hardware, label cover, durable construction.

1191208 SM - $72.351191209 MD/LG - $72.351191210 XL - $72.35

7088$23999

FALLTECHFLOTECH HARNESSThree aluminum D-rings located on hips and back, FLOWSCAPE technology allows the harness to re-main raised off the body, abrasion-resistant Lycra lining, double-sided web-bing with twist resistance, pull down torso adjusters, work belt with nine posi-tion adjustments.

SM - $239.99MD - $239.99LG - $239.99XL - $239.99

1113160 $31999

DBI SALA EXOFITNEX CONSTRUCTION HARNESSAluminum front, back and side D-rings, locking quick-connect buckles, sewn-in hip pad, removable belt.

1113150 SM - $319.991113151 MD - $319.991113154 LG - $319.991113160 XL - $319.99

Without chest D-ring.

1113121 SM - $306.991113124 MD - $306.991113127 LG - $306.991113130 XL - $306.99

1113315 $60999

DBI SALA EXOFIT NEX CONSTRUCTION ARC FLASH HARNESSNomex/Kevlar webbing, PVC coated alumi-num back and side D-rings, locking quick-connect buckles, sewn-in hip pad and belt.

1113315 SM - $609.991113316 MD - $609.991113317 LG - $609.991113318 XL - $609.99

Dorsal web loop, front rescue loops.

1113320 SM - $650.191113321 MD - $650.191113322 LG - $650.191113323 XL - $650.19


ROPE & RESCUE \\ HARNESSES

C71000 $37500

PETZL NAVAHOBOD HARNESSWaistbelt, shoulder straps, and suspension seat lined with breathable perforated foam. Ventral and lateral attachment points transfer weight evenly for maximum comfort. Waist-belt and shoulder straps equipped with self-locking DoubleBack buckles - also available with FAST automatic buckles for quick and easy opening and closing.

C7100 1B Size 1 - $375.00C7100 2B Size 2 - $375.00

FAST buckles.

C710F0 1B Size 1 - $400.00C710FO 2B Size 2 - $400.00

FAST buckles, black-out version.

C710FN 1B Size 1 - $420.00C710FN 2B Size 2 - $420.00

CROLL, integrated CROLL ventral rope clamp.

C71CF0 1B Size 1 - $450.00C71CF0 2B Size 2 - $450.00

CROLL, black-out version.

C71CFN 1B Size 1 - $470.00C71CFN 2B Size 2 - $470.00

1113345 $27499

DBI SALA EXOFIT NEX ROPE AND RESCUE HARNESSTech-Lite aluminum front, back and side D-rings, locking quick-connect buckles, hybrid comfort padding, ultra-soft edging, water-repellent webbing.

1113345 SM - $274.991113346 MD - $274.991113347 LG - $274.991113348 XL - $274.99

Black-out version.

1113370 SM - $289.991113371 MD - $289.991113372 LG - $289.991113373 XL - $289.99

SG51036$34995

PMI AVATARDIAMOND CHEST HARNESS8 attachment points: dorsal, sternal, waist, hip, shoulder, and lumbar. Fully adjustable rear leg risers and chest harness, ergonomic padding.

SG51036 Standard- $349.95SG51042 LG/XXL - $349.95

Circumferential chest holds wearer’s upper torso closer to the rope making it an ideal choice for rope ascending systems.

SG51148 Standard - $349.95SG51149 LG/XXL - $349.95

380 $35495

YATES VOYAGERHARNESSAttachment points at waist, hips, chest, back (lumbar), back (dorsal) and shoulders, 5” waist pad, quickly and easily donned and adjusted by use of camlock buckles, wide leg pads, large D-rings for multiple connections, weighs 6 lbs. Also available in all black rigging version (item 380R).

380S SM - $354.95380M MD - $354.95380L LG - $354.95380X XL - $354.95

390 $39975

YATES RTRTOWER ACCESSHARNESSAttachment points at waist, hips, chest, back (lumbar) and back (dorsal), extra-large side positioning rings, chest harness specifically designed to incorporate a chest descender (not included) for tower access work, specially tailored to reduce chafing of the neck. Available in Flash Rated (390FR) and Kevlar (390K) versions.

390S SM - $399.75390M MD - $399.75390L LG - $399.75390X XL - $399.75


HARNESSES // UNIVERSAL

AB17510 $2999

PROTECTA FIRST 3 POINT FULL BODY HARNESSOne dorsal D-ring, pass-thru buckle chest and leg straps.

AB17520 $3399

PROTECTA FIRST 3 POINT POSITIONING FULL BODY HARNESSOne dorsal D-ring, two side-hip positioning D-rings, pass-thru buckle chest and leg straps.

AB17530 $2999

PROTECTA FIRST 5 POINT FULL BODY HARNESSOne dorsal D-ring, pass-thru buckle chest and leg straps, torso adjusters.

AB17540 $3575

PROTECTA FIRST 5 POINT POSITIONING FULL BODY HARNESSOne dorsal D-ring, two side-hip positioning D-rings, pass-thru buckle chest and leg straps, torso adjusters.

48113 $6755

ELK RIVER CONSTRUCTION PLUS HARNESSBack D-ring with fully integrated in-line 6’ NoPac energy absorbing lanyard attached, fits small to XL.

55302 $6195

ELK RIVER FREEDOM HARNESSBack and side D-rings, mating buckle chest and leg straps, sub-pelvic strap, fits small to large.

62432 $10789

ELK RIVER WIND EAGLE HARNESSBack, side, and chest D-rings, quick-connect buckles, large comfort D-ring slider on back, leg pads, fits small to large.

1102000 $9465

DELTA VEST STYLEHARNESSBack D-ring, tongue buckle leg straps, water repellent webbing, lanyard parks, vertical torso adjuster.

1102008 +Side D-rings - $108.75

67498 $21099

ELK RIVER KESTRELHARNESSAluminum back and side D-rings, steel chest D-ring, quick-connect buckles, breathable padding on back/shoulders and leg straps, fits small to large.


ACCESSORIES \\ HARNESSES

1150174 $5999

DBI SALA HARNESS HYDRATION SYSTEMIncorporates a simple clip-on design that attaches to any harness, 50 oz capacity, zip-up nylon carrier, anti-microbial, taste free tubing and reservoir.

3115 $175

ERGODYNE SQUIDS WRISTTOOL LANYARDHolds up to 5 lbs, adjustable barrel lock, S/M fits 5-7” wrist, L/XL fits 7-9” wrist.

3110 $949

ERGODYNE SQUIDS DUAL CARABINER TOOL LANYARDHolds up to 10 lbs, aluminum carabiner on each end for tool attachment, 35” to 42”.

3110EXT 42” to 54” - $9.65

3100 $895

ERGODYNE SQUIDS TOOL LANYARDHolds up to 10 lbs, aluminum carabiner, adjustable barrel lock, 35” to 42”, lime or black.

3100EXT 42” to 54” - $9.15

1150911 $1199

DBI SALATOOL LANYARDTool lanyard extends from 42” to 50” and prevents tools from falling, holds up to 10 lbs. Simply choke-off to any harness/belt.

9501403$2365

DBI SALASUSPENSION TRAUMA SAFETY STRAPSDeploy when needed and hook together in seconds, allows suspended worker to stand up in harness and relieve down-ward pressure, continuous loop design allows for one-foot or two-foot suspension. Connects to most harnesses, one pair.

SG51035 $1375

PMI GEAR DAISY Single length of webbing, hand loop at one end, made from 1” tubular nylon webbing. Each loop will hold 2 kN (450 lbf) because of “double back” construction.

9505494 $1999

EXOFIT NEX WIND ENERGY RADIO HOLSTERConveniently holds and protects a radio, cell phone or other item like a Lad-Saf sleeve.

16CDL $2999

GME SUPPLYSPREADER BARRelieves pressure on the waist and hips while sitting or leaning. 9-3/4” length, 2-1/4” width, 3/4” throat. 5,000 lb MBS, 3.6M gate.


36827 $5399

ELK RIVER FLEX SHOCK ABSORBING WEB LANYARDZsnaphook on each end, stretches 4.5’-6’, ANSI compliant.

35378 $5425

ELK RIVER NOPAC SHOCK ABSORBING WEB LANYARDZsnaphook on one end, Zrebar hook on opposite end, 6’ length, ANSI compliant.

35427 $5055

ELK RIVER NOPAC SHOCK ABSORBING WEB LANYARDZsnaphook on each end, stretches 4.5’-6’, ANSI compliant.

11306 $7249

ELK RIVER GALVANIZED AIRCRAFT CABLE LANYARDZsnaphook on each end, 6’ length,ANSI compliant.

1244611 $13599

DBI SALA SHOCKWAVE2 ARC FLASH SHOCK ABSORBING LANYARDNomex/Kevlar tubular webbing jacket, choker web loop, stretches 4.5’-6’, ANSI compliant.

LANYARDS // SINGLE LEG

1241906 $10049

DBI SALA WRAPBAX TIE-BACKSHOCK ABSORBING WEB LANYARDSpecifically designed for tie-back use, WrapBax hook at one end, snap hook at other end, heavy duty webbing for abrasion resistance, 6’ length, ANSI compliant.

AE57610 $3999

PROTECTA FIRST SHOCK ABSORBING WEB LANYARDSnaphook on each end, 6’ length,OSHA/ANSI compliant.


TWIN LEG \\ LANYARDS

1244409 $20995

DBI SALA SHOCKWAVE2 LANYARDSnaphook center / aluminum rebar hook ends, stretches 4.5’-6’, ANSI compliant.

1244412 Flat steel hook ends - $179.991244406 Snaphook ends - $112.85

1244448 $23999

DBI SALA SHOCKWAVE2 SHOCK ABSORBING LANYARD WITH SAFLOK MAX HOOKSReduces trip fall hazards, dragging, and snagging for complete freedom of movement, snaphook center / 3” SafLok Max hook ends, stretches 4.5’-6’, ANSI compliant.

35478 $9969

ELK RIVER SHOCKABSORBING FLEX NOPAC LANYARDExpandable design keeps lanyard legs out of your way, Zsnaphook center / rebar hook ends, stretches 4.5’-6’, ANSI compliant.

35428 ZSnaphooks at all ends - $76.49

8240Y3 $8699

FALLTECH ELASTECH SHOCK ABSORBING LANYARDExpands and contracts to avoid tripping hazards, lightweight design reduces end-user fatigue, snaphook center / rebar hook ends, stretches 4.5’-6’, ANSI compliant.

8259Y3 Non-stretch 6’ (yellow) - $69.958256ELY3 Clear Pack 6’ (yellow) - $89.99

1240416 $20655

DBI SALA EX STOP II SHOCK ABSORBING LANYARDZsnaphook center / aluminum rebar hook ends, 6’ length, ANSI compliant.

35379 $7995

ELK RIVER NOPAC SHOCK ABSORBING LANYARDSnaphook center / Zrebar hook ends, 6’ length, ANSI compliant.

35416 $12125

ELK RIVER FLEX NOPAC SHOCK ABSORBING LANYARDZsnaphook center / aluminum carabiner ends, stretches 4.5’-6’, ANSI compliant.

35716 Carabiner center - $172.99

36936 $11299

ELK RIVER TIE-BACK SHOCK ABSORBING LANYARDZsnaphook center / tie-back captive eye carabiner ends, 6’ length, ANSI compliant.


LANYARDS // POSITIONING

L52A $17000

PETZL GRILLON ADJUSTABLEPOSITIONING LANYARDLanyard with fine adjustment system for precise work position-ing. Can be used in double mode to distribute weight on the belt or single mode to distribute weight between the waistbelt and leg loops. A removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide.

L52A 002 2m (6.56’) - $170.00L52A 003 3m (9.84’) - $173.00L52A 003 5m (16.40’) - $187.00

With hook connector.

L52H 002 2m (6.56’) - $187.00L52H 003 3m (9.84’) - $193.00L52H 004 4m (13.12’) - $198.00L52H 005 5m (16.40’) - $203.00

With MGO rebar hook connector.

L52M 003 3m (9.84’) - $240.00

Replacement straps.

L52R 002-020 Multiple lengths - Price variesL5RH 002-005 Multiple lengths - Price variesL5RM 003 - $115.00

HD26179$13845

PMI PIRANHA ADJUSTABLEPOSITIONING LANYARD2m x 12mm diameter UV stabilized high strength TECTRA rope complete with abrasion protection, sewn terminations and safety hook ter-mination. 10mm screwlink supplied for connection to harness D ring. Stainless steel body, cam and fixings for durability. The Piranha has a gradual action and can be accurately controlled with one hand - for both taking in and paying out.

34416 $12399

ELK RIVER QUICK-ADJUSTABLE ROPE POSITIONING LANYARD5/8”x6’ polyester kernmantle rope, 13190 captive eye carabiner, ErgoGrip adjuster, 17450 carabiner, ANSI compliant.

34406 5/8” 3 strand nylon rope - $74.35

8209 $4495

FALLTECH ADJUSTABLE WEB LANYARDPolyester webbing resistant to UV light and abrasion, snaphook at each end, StayPut buckle easily adjusts from 4’ to 6’, ANSI compliant.

8204 4’ Non-adjustable - $32.958203 3’ Non-adjustable - $31.95

29023 $3499

ELK RIVER POSITIONING WEB LANYARD ZSnaphook at each end, 3’ length, ANSI compliant.

29024 4’ - $35.4529026 6’ - $35.9929506 Adjustable 3-6’ - $46.95

29433 $5669

ELK RIVER POSITIONING WEB LANYARD Zsnaphook one end, Zrebar at opposite end, 3’ length, ANSI compliant.

29434 4’ - $58.9529436 6’ - $62.95


SELF-RETRACTING \\ LANYARDS

AD111A $13599

PROTECTA REBEL SRL11’ self retracting web lifeline, rugged aluminum housing, steel snaphook end, housing carabiner.

AD120A 20’ - $233.07AD111AR 11’ with swivel - $148.79AD120AR 20’ with swivel - $263.89

21211 $12825

ELK RIVER RETRACTAMANSWIVEL SRL1-7/8” x 8’ retractable lanyard, 3/4” Centurion snaphook on one end, 3/8” auto-twist lock carabiner on other end, rated for fall arrest.

3590500 $38799

PROTECTA REBEL SRL33’ of 3/16” galvanized steel cable, shock-resistant thermoplastic hous-ing, self locking swivel snap hook with impact indicator, housing carabiner.

3590550 50’ - $495.503590670 100’ - $1,092.50

7276WR $23495

FALLTECH DYNEEMA CONTRACTOR SRL20’ high strength Dyneema webbing, load-indicating swivel carabiner and connecting carabiner with 3,600 lb. gate strength, over-molded alloy steel frame.

3504430 $79299

DBI SALA ULTRA-LOK SRL30’ of 3/16” galvanized steel wire rope, self locking swivel snap hook with impact indicator, anti-ratcheting twin disc brake system.

3504450 50’ - $943.753504485 85’ - $1,156.55

3101277 $29899

DBI SALA NANO-LOK TWIN LEGSELF-RETRACTING LIFELINEQuick-connector anchorage connection and two aluminum rebar hooks. Attaches directly to back of most harnesses, installs to web, leaves dorsal D-ring open for other equipment or rescue, limits life-line twisting for smoother operation, high-strength housing provides maximum durability, replaces twin-leg lanyard and improves safety, stops falling worker within inches.

3101280 Two steel rebar hooks - $312.993101279 Two steel snaphooks - $245.693101225 $13195

DBI SALA NANO-LOK SINGLELEG SELF-RETRACTING LIFELINEQuick-connector anchorage connection and aluminum carabiner (captive eye), attaches directly to back of most harnesses, installs to web, leaves dorsal D-ring open.

3101227 Aluminum rebar hook - $162.993101235 Aluminum carabiner anchorage connection and aluminum carabiner (captive eye) end - $121.99


CARABINERS & HARDWARE // CARABINERS

M36 TL $1895

PETZL WILLIAM ALUMINUM CARABINER24mm gate, Triact-Lock.

M36 BL Ball-lock - $18.95M36 SL Screw-lock - $14.95

M34 BL $1795

PETZL AM’D ALUMINUM CARABINER1” gate, Ball-Lock.

M34 TL Triact-lock - $17.95M34 SL Screw-lock - $12.95

M33 SL $1695

PETZL OK ALUMINUM CARABINER19mm gate, Screw-Lock.

M33 TL Triact-lock - $22.95

17442 $3645

ELK RIVER ALUMINUM CARABINER7/8” gate, 1/2”x4”x2”, twist lock, ANSI compliant.

17237 $8599

ELK RIVER ALUMINUM CARABINER2” gate, 5/8”x8-21/32”x 5-1/8”, twist lock, ANSI compliant.

17460 $3679

ELK RIVER STEEL CARABINER1-1/8” gate, 7-1/8” length, 4-1/2” width, twist lock, ANSI compliant.

17440 $2565

ELK RIVER STEEL CARABINER1” gate, 1”x4-7/8”x3-1/8”, twist lock, ANSI compliant.

1146 $3199

YATES WIZARD STEEL CARABINER1” gate, super strong drop forged, 3 stage auto lock, ANSI compliant.

17426 $5475

ELK RIVER STEEL CARABINER2-1/4” gate, 1/2”x7-1/2”x4-1/2, twist lock, roll pin, ANSI compliant.

17435 $2949

ELK RIVER STEEL CARABINER2” gate, 1/2”x6-5/8”x3-7/8”, twist lock, roll pin, ANSI compliant.

04C09A $4249

GME SUPPLYSTEEL CARABINER2” gate, 9.3” length, 5.2” width, zinc plate finish, ANSI compliant.

Compare to: 17420

04C09B $3499

GME SUPPLYSTEEL CARABINER2-1/4” gate, 8.75” length, 5.2” width, zinc plate finish, ANSI compliant.

Compare to: 17426

71C09B $2999

GME SUPPLYSTEEL CARABINER1-3/4” gate, 7” length, 3.7” width, dual or triple lock, ANSI compliant.

Compare to: 17435


CARABINERS \\ CARABINERS & HARDWARE

1778 $2399

KONG TACTICAL ALLUMINUM CARABINER.9” gate, 3 stage auto lock, nylon gate barrel, ANSI compliant.

SM205607N $3399

PMI SMC CROSSOVER ALUMINUM CARABINER1” gate, 5.53”x3.35”, dual or triple lock, black or pewter, ANSI compliant.

SM102100 $2749

PMI SMC KINETICALUMINUM CARBINER1” gate, 4.6”x2.8”, auto lock, ANSI compliant.

12ATL $2499

GME SUPPLYALUMINUM CARABINER3/4” gate, 4-13/16” length, 3-1/8” width, twist lock, ANSI compliant.

17443 $2665

ELK RIVER STEELCARABINER1” gate, 1/2”x4”x2-1/24”, twist lock, roll pin, ANSI compliant.

17450 $2499

ELK RIVER STEEL CARABINER1/2” gate, 3/8”x3-1/4”x1-1/8”, twist lock, ANSI compliant.

17451$2599

ELK RIVER STEEL CARABINER3/4” gate, 1/2”x3-1/2”x1-1/2”, twist lock, ANSI compliant.

2000127 $14015

DBI SALA STAINLESS STEEL CARABINER11/16” gate, self-closing/self-locking gate, ANSI compliant.

2000112 $3775

DBI SALA SAFLOK STEEL CARABINER11/16” gate, self-closing/self-locking gate, ANSI compliant.

2000113 $7235

DBI SALA SAFLOK STEEL CARABINER1-3/16” gate, self-closing/self-locking gate, ANSI compliant.

12CTL $2495

GME SUPPLYSTEEL CARABINER1” gate, 4” length, 2” width, twist lock, key lock gate, ANSI compliant.

Compare to: 17443

12CTLD $1699

GME SUPPLYSTEEL CARABINER9/16” gate, 4.1” length, 2.2” width, twist lock, zinc plate finish, ANSI compliant.

Compare to: 17450

12CTLM $2499

GME SUPPLYSTEEL CARABINER3/4” gate, 4.3” length, 2.6” width, zinc plate finish, ANSI compliant.

Compare to: 17451 or 2000112


CARABINERS & HARDWARE // POSITIONING

13420 $4679

ELK RIVER REBARCHAIN ASSEMBLY 25-1/2” with 3/4” Centurion sna-phook ends and adjuster formhook center, ANSI compliant.

13425 $6299

ELK RIVER REBARCHAIN ASSEMBLYWITH SWIVEL25-1/2” with 3/4” Centurion snaphook ends and swivel hook center, ANSI compliant.

5920059 $16379

DBI SALA REBARCHAIN ASSEMBLYWITH SWIVEL24” with snaphook ends and swivel-ing 3” Saflok Max hook center, ANSI compliant.

AF77710 $4399

PROTECTA REBARCHAIN ASSEMBLY20” with snaphook ends and large flat steel hook center.

29741 $5695

ELK RIVER REBARWEB ASSEMBLY18” with 3/4” Centurion snaphook ends and 2-1/2” Centurion rebar hook center, ANSI compliant.

29740 14” - $56.9529743 24” - $56.95

29761 $6785

ELK RIVER REBARWEB ASSEMBLY WITH SWIVEL18” with 3/4” Centurion snaphook ends and 2-1/2” Centurion rebar swivel hook center, ANSI complaint.

1231520 $13149

DBI SALA WEB REBAR ASSEMBLYWITH SWIVEL22” with locking snaphook ends and swiveling 2-1/4” aluminum rebar hook center, ANSI complaint.

13400 $9999

ELK RIVER TOWER POSITIONING KIT2-1/4” swivel form hook, 3/4” separator snaphook, 3/4” fall rated steel carabiner, ANSI complaint.

13218 $3475

ELK RIVER CENTURION REBAR HOOK8-31/32” length, 4-41/64” width, 2-1/2” throat opening, ANSI complaint.

13101 $1399

ELK RIVER CENTURION SNAPHOOK5” length, 2-1/4” width, 3/4” throat opening, auto-lock, ANSI complaint.

13329 $5265

ELK RIVER CENTURION SWIVEL REBAR HOOK10-3/4” length, 5” width, 2-1/4” throat opening, ANSI complaint.

13321 $3795

ELK RIVER CENTURION SWIVEL SNAPHOOK7-16/64” length, 2-1/4” width, 3/4” throat opening, ANSI complaint.


ANCHORAGE \\ CARABINERS & HARDWARE

2104700 $17655

DBI SALA GLYDER2 SLIDINGBEAM ANCHORProvides complete horizontal mobility, tie-off overhead or at feet (use with Force2 shock absorbing lanyard when used at feet). Anchor effortlessly slides across the beam on its wear pads eliminating metal-to-metal contact, fits flange 3-1/2” to 14” wide and up to 1-1/4” thick.

13050 $2125

ELK RIVER REUSABLE ROOF ANCHORHinged at D-ring for variable roof pitch applications, forged alloy D-ring, zinc plated steel includes (32) 2” nails for single use, reusable after inspection with new hardware, 5,000 lb fall arrest rated.

2104560 $7595

DBI SALA CONCRETE D-RING ANCHORA simple, versatile and safe concrete anchor solution for use in tempo-rary or permanent applications, provides a safe tie-off point. For flexibility, install into 11/16”, 18mm or 3⁄4” holes – only standard drill bits needed. 5,000 lb fall arrest rated, re-usable D-ring assembly.

AJ47406 $2399

PROTECTA FIRST WIRE ROPE SLINGPass-through type anchorage connector, 6’ length, 1/4” diameter galvanized cable, zinc coated attachment rings.

AJ408AG Attachment ring one end, snap hook other end - $43.95

2100101 $13195

DBI SALA SAFLOK TOGGLE ANCHOR5,000 lb fall arrest rated, swiveling D-ring for safe and compatible con-nections. Use vertically, horizontally or overhead for added versatility.

13080 $9599

ELK RIVER PORTABLE CONCRETE ANCHOR CONNECTOR5,000 lb fall arrest rated, provides portable and safe anchorage for horizontal, vertical, and overhead surfaces, ANSI compliant.

26772 $2965

ELK RIVER EZE-MAN SLING 1-3/4” x 2’, one triangle end, one D-ring end.

26773 1-3/4” x 3’ - $29.6526774 1-3/4” x 4’ - $33.3926776 1-3/4” x 6’ - $33.39

7336 $2799

FALLTECH WEB PASS-THRU ANCHOR1-3/4” x 3’, standard D-ring at one end, large D-ring at other end.

7372 1-3/4” x 6’ - $31.99


ROPE & LIFELINES // ROPE

RR160 $138/ftPMI CLASSIC PRO16mm (5/8”), MBS 14837 lb, 16 carrier construction, third party certified, torsionally balanced, continuous filament nylon, various lengths and colors available.

RR090 9mm (MBS 4721 lb) - $0.69/ftRR100 10mm (MBS 6070 lb) - $0.78/ftRR110 11mm (MBS 6070 lb) - $0.90/ftRR125 12.5mm (MBS 9442 lb) - $1.08/ft

SR125WZ $108/ftPMI CLASSIC SPORT12.5mm, MBS 9442 lb, 16 carrier construction, nylon, classic construction.

SR090WZ 9mm (MBS 4721 lb) - $0.68/ftSR100WZ 10mm (MBS 6070 lb) - $0.77/ftSR110WZ 11mm (MBS 6744 lb) - $0.89/ft

WR100YX $078/ftPMI WATER RESCUE10mm, MBS 3597 lb, continuous polypropylene core, lightweight, nylon sheath.

WR070YX 7mm (MBS 1798 lb) - $0.57/ft

IR110 $093/ftPMI ACCESS PRO11mm, MBS 6227 lb, 32 carrier construction, polyester sheath, nylon core, low stretch, available in 2 colors.

IR130 13mm (MBS 10566 lb) - $0.??/ft

4N-120 $16999 DOUBLE BRAID COMPOSITE3/8”, ABS 6200 lb, strong polyester cover over shock absorbent nylon core, double braid construction, chemical resistant, UV and abrasion resistant.

300’ spool.

4N-160 1/2” (ABS 10500 lb) - $214.654N-200 5/8” (ABS 15320 lb)- $298.354N-240 3/4” (ABS 25730 lb) - $399.55

600’ spool.

4N-120 3/8” (ABS 6200 lb) - $306.454N-160 1/2” (ABS 10500 lb) - $386.154N-200 5/8” (ABS 15320 lb) - $549.994N-240 3/4” (ABS 25730 lb) - $724.99

2WP-140 $21465

STATIC KERNMANTLE 7/16”, ABS 7900 lb, tough chemical-resis-tant polyester cover over a nylon core, firm yet flexible enough to be tied and passed over pulleys or sheaves, steam setting helps to eliminate cover over core slippage.

300’ spool.

2WP-160 1/2” (ABS 10500 lb) - $298.35

2W9-200 5/8” (ABS 25730 lb) - $399.55

600’ spool.

2WP-120 3/8” (ABS 6400 lb) - $349.99

2WP-140 7/16” (ABS 7900 lb) - $419.49

2WP-160 1/2” (ABS 10500 lb)- $499.99

2W9-200 5/8” (ABS 13000 lb) - $595.49

7D-080 $62999

DYNEEMA TOW ANDWINCH LINE1/4”, ABS 9880 lb, strong polyester cover over a braided dyneema core, 10 x stronger than steel yet floats, double braid construction, eliminate backlash, low electrical conductivity, chemical resistant, maximum energy absorption UV and abrasion resistant.

600’ spool.

7D-100 5/16” (ABS 11500 lb) - $899.997D-120 3/8” (ABS 18000 lb) - $1,199.997D-140 7/16” (ABS 24000 lb) - $1,575.49 7D-160 1/2” (ABS 30000 lb) - $1,975.49

1A-120 $14999

POLYESTER DOUBLE BRAID3/8”, ABS 4978 lb, strong, polyester cover over a low stretch polyester core, double braid construction, chemical resistant, low stretch, UV and abrasion resistant.

300’ spool.

1A-240 3/4” (ABS 19785 lb) - $377.99

600’ spool.

1A-120 3/8” (ABS 4978 lb) - $266.801A-140 7/16” (ABS 6910 lb) - $313.591A-160 1/2” (ABS 8298 lb) - $359.751A-200 5/8” (ABS 12568 lb) - $532.151A-240 3/4” (ABS 19785 lb) - $689.49


ROPE \\ ROPE & LIFELINES

PR110 $085/ftPMI ISOSTATIC11.5mm, MBS 6969 lb, NFPA certified, 16 carrier construction, 6,6 nylon sheath, polyester core, resists flattening under load, available in 5 colors.

PR130 13mm (MBS 9442 lb) - $0.94/ft

RR100OX $151/ftPMI RETRO REFLECTIVE10mm, MBS 5845 lb, classic EZ-Bend, retro reflective filaments, increases nighttime safety.

RR125YG 12.5mm (MBS 9442 lb) - $1.51/ft

PR100NP $084/ftPMI TALON11.5mm, MBS 5000 lb, NFPA certified, 16 carrier construction, 6,6 nylon sheath, polyester core, resists flattening under load, available in 2 colors.

PR110NP 11.5mm (MBS 6070 lb) - $0.98/ft

7500 $118/ftNOVABLUE POLYESTER DOUBLE BRAID1/2”, ABS 10400 lb, specific gravity of 1.38, low elongation, high strength, abrasion resista-nce, UV stabilized cover, ureth-ane coating gives greater snag resistance and durability.

7600 5/8” (ABS 15500 lb) - $1.46/ft7700 3/4” (ABS 18000 lb) - $2.45/ft7800 1” (ABS 32000 lb) - $3.50/ft

6500 $104/ftSTARLINE STATIC DOUBLE BRAID1/2”, MBS 10400 lb, low stretch, high strength, easily spliceable, abrasion resistant, UV stabilized yarns, dirt and snag resistant, minimal water absorption, available in red and white.

6600 5/8” (MBS 15200 lb) - $1.56/ft

25500 $063/ftNYLON THREESTRAND1/2”, MBS 7886 lb, four stage premium construction rope. Ex-tremely versatile, excellent shock absorption and abrasion resistance, resists mildew, hardening and UV rays. Great for anchor lines, tow ropes, tie downs, etc.

26500 5/8” (MBS 11771 lb) - $0.88/ft

R11 $092/ftPETZL VECTOR7/16”, MBS 7000 lb, fusion process helps maintain the rope’s shape and gives it excellent handling. Various lengths and colors available.

R12 1/2” (MBS 9000 lb) - $1.15/ft

*All rope must be ordered in 50’ increments.


ROPE & LIFELINES // LIFELINES

20201 $15905 ELK RIVER NYLON LIFELINE WITH THIMBLE ENDS5/8” nylon rope reel with thimble eye ends, 100’ length.

20203 200’ - $279.1520205 300’ - $387.2520207 400’ - $509.1920211 600’ - $686.05

1202794 $7375 DBI SALA 50’ LIFELINE 5/8” polyester/polypropylene blend rope for strength and durability, self locking snap hook at one end for easy connection to the anchorage.

5901583 $2475 DBI SALA COUNTERWEIGHT FOR VERTICAL LIFELINES5.7 lb. (2.6kg) flexible counterweight keeps lifeline taught.

20225 $15485 ELK RIVER NYLON LIFELINE WITH THIMBLE AND ZSNAPHOOK5/8” nylon rope reel with thimble eye at one end and 3.6M Zsnaphook at opposite end, 100’ length.

20227 200’ - $261.4520229 300’ - $336.7520231 400’ - $479.9520235 600’ - $693.15

49811 $4699 ELK RIVER CONSTRUCTION PLUS POLYESTER ROPE LIFELINE WITH SNAPHOOKS5/8” polyester wrapped polypropylene, 3/4” double-locking auto-lock snaphook at each end, 25’ length.

49812 50’ - $63.5549813 75’ - $84.45

49822 $3849 ELK RIVER CONSTRUCTION PLUS POLYESTER ROPE LIFELINE WITH THIMBLE AND SNAPHOOK5/8” polyester wrapped polypropylene, 3/4” double-locking auto-lock snaphook at one end, thimble eye at opposite end, 25’ length.

49823 50’ - $55.5549824 75’ - $83.45

20213 $17439 ELK RIVER NYLON LIFELINE WITH ZSNAPHOOK ENDS5/8” nylon rope reel with 3.6M Zsnaphook ends, 100’ length.

20215 200’ - $289.2520217 300’ - $402.5920219 400’ - $524.5520223 600’ - $700.25


D05 $3595 PETZL PIRANA DESCENDERFor use with single ropes between 8 and 13mm in diameter, three different braking positions to select from before beginning a descent, for use with a locking carabiner having a 12mm cross-section.

SM128701N $4595 SMC RESCUE 8 DESCENDEROne of the most popular full-sized descenders used by professionals throughout the rescue, fire service, and police/tactical. Made of solid aluminum and heat treated.

D11 $9495 PETZL RACK DESCENDERVariable friction descender with braking bars, allows the friction to be adjusted during the descent, distributes friction and heat to help preserve the rope, does not twist the rope.

D200S0 $23500 PETZL I’D DESCENDERLarge handle is rotated in various orientations to control whether the unit is in descent, stopped, or complete lock-off. For ropes between 10mm and 11.5mm in diameter.

D200LO For ropes 11.5mm-13mm in diameter - $235.00

D09 $12500 PETZL STOPSelf-braking function allows you to easily stop and maintain your position on rope, device can be rapidly installed or removed from the rope without disconnecting it from the harness.

HD26182 $19900 HEIGHTEC POWERLOCKDESCENDER Evacuation descender designed for two person loads, easily adjusts the amount of slack rope prior to descent and provides excellent braking control.

2103189 $18999 DBI SALA FISK DESCENDERDescent control system designed for durability, ther-mal capacity and smooth flow, allows the operator to tie off and position themselves at a specific work level, comes with instructional DVD.

HD26175 $19900 HEIGHTEC QUADRA DESCENDERChanges instantly from one mode to another while under load, increases frictional force for lowering heavy loads, will arrest a 2 person fall factor by 1/3 when in life lining mode.

DESCENT DEVICES \\ ROPE & LIFELINES


SAFETY WEAR // HELMETS

A10V $11500

PETZL VERTEX VENTVentilation holes with adjustable sliding shutters allow air to circulate in the helmet when needed. Six-point webbing suspension system conforms to the shape of the head for improved comfort. Shock absorption is achieved through deformation of the outer shell. CenterFit adjustment system ensures centering and optimal stability.

A10VWA White - $115.00A10VRA Red - $115.00A10VOA Orange - $115.00A10VYA Yellow - $115.00A10VBA Blue- $115.00A10VNA Black - $115.00

A10B $11500

PETZL VERTEX BESTUnventilated shell ensures protection against electrical risks and molten metal splash. Six-point webbing suspension system conforms to the shape of the head for improved comfort. CenterFit adjustment system ensures centering and optimal stability. Available in white, red, orange, yellow, blue, and black.

3010944 $2799

SMITH&WESSON WESTERN OUTLAW COWBOY HARD HAT4-point ratcheting suspension, wide brim provides protection from the sun, rain and heat, comfortably fits head sizes 6.5 to 8, ANSI compliant.

6609 $499

ERGODYNE CHILL-ITS TERRY SWEATBANDAbsorbent terry headband, fits most hard hat suspension systems, machine wash-able,100% cotton, economical way for hard hat wearers to manage moisture.

88128 $545

MSA CHIN STRAPHelps keep hats and caps stable on the worker’s head. Attaches directly to shell, contains no metal. For use with MSA V-Gard and Topgard hats.

A10200 $995

PETZL ABSORBENT FOAM FOR VERTEXComfort foam for Petzl VERTEX, absorbs perspiration, machine washable.

A20200 for ALVEO - $9.95

10115730 $899

MSA V-GARD FRAME FOR SLOTTED CAPSSloped design allows liquids, chips, and other materials to slide off frame and away from sight, ANSI compliant.

11306 Polycarbonate visor - $5.99

A15 $4595

PETZL VIZIR PROTECTIVE FACE SHIELDEasy to mount on VERTEX and ALVEO helmets with purpose-built inserts. Two positions: raised on top of helmet, lowered in working position, scratch and fog resistant.

HL33012 $15095

PMI ADVANTAGE NFPA HELMETMade of Kevlar, fully adjustable ratchet headband and straps, three point chin-strap, headlamp retainer, goggle mount, clips to attach earmuffs. Available in red, white, blue, orange, black, and lime green. Head circumference 52-64 cm.

475300 $1199

MSA V-GARD HARD HAT CAP STYLEFas-Trac 4-point suspension includes ratcheting system and perforated vinyl sweatband, polyethylene shell, top impact protection, ANSI compliant. Available in red, white, blue, green, yellow, orange, hi-vis orange and grey.

475310 Full brim - $16.49



H9P3E $1999

PELTOR OPTIME 98 EARMUFFSEasily attaches to most slotted hard hats, for noise levels up to 98 dBA, NRR 23 dB, dual low pressure bands improve comfort.

6852 $655

ERGODYNE N-FERNO 2-LAYERWINTER LINER100% cotton twill shell, 100% poly fleece lining, shoulder length, elastic gather at forehead, warming pack pockets.

E36A $17500

PETZL NAO SELF-ADJUSTING HEADLAMPRechargeable headlamp adapts its two high power LEDs instantly and automatically to lighting needs, provides longer battery life, personalization software included.

E78CHB $7495

PETZL PIXA 3 MULTI-BEAM HEADLAMPAdapted for close-range work, moving around and long-range vision. May be worn on the head, mounted on the helmet, or placed on the ground.

2620 $3199

PELICAN HEADSUP LITE FLASHLIGHT Hybrid LED/Xenon hands-free flash-light, multi-angle pivoting head, rubber strap for hard hat use and adjustable cloth strap for bare head use.


A20B $10500

PETZL ALVEO BEST Unventilated shell ensures protection against electrical risks and molten metal splash. Lightweight helmet with comfort foam that is barely felt on the head. Shock is absorbed by deformation of the expanded polystyrene liner. CenterFit adjustment system ensures centering and optimal stability.

475395 $7795

MSA SKULLGARD HARD CAPHeavy-duty construction for use in steel mills and other heavy industries where elevated temperatures are common, resin shell with 4-point Fas-Trac ratcheting suspension, fits head sizes 6-8, ANSI compliant.

475407 Full brim - $84.95A20V $10500

PETZL ALVEO VENTLightweight helmet with comfort foam that is barely felt on the head. Shock is absorbed by deformation of the expanded polystyrene liner. CenterFit adjustment system ensures centering and optimal stability. Ventilation holes.

A20VWA White - $105.00A20VRA Red - $105.00A20VYA Yellow - $105.00

10103908 $2895

MSA V-GARD DIGITAL CAMOUFLAGE HARD HAT CAP STYLEFas-Trac 4-point suspension includes ratcheting system and perforated vinyl sweatband, polyethylene shell, top impact protection, ANSI compliant.

10104254 Full brim - $32.99

20392 $999

JACKSON SAFETY CHARGER HELMETLightweight for comfort, molded from high density polyethylene, 4 point ratchet suspension, trim bill, universal slots for easy accessory attachment, ANSI compliant.

HELMETS \\ SAFETY WEAR

SAFETY WEAR // GLOVES


819WP $4479

PROFLEX THERMAL WATERPROOF WITH GAUNTLET40 grams of Thinsulate insulation, Hipora breathable waterproof/windproof liner, 500D nylon back and gauntlet cuff, PVC reinforced. Also available with OutDry (OD).

16043 MD - $44.7916044 LG - $44.7916045 XL - $44.79

817 $2199

PROFLEX THERMAL UTILITY40 grams of Thinsulate insulation, low-profile closure with elastic cuff, padded spandex back and neoprene knuckle pad. Also available in waterproof (WP).

16333 MD - $21.9916334 LG - $21.9916335 XL - $21.99

812 $1389

PROFLEX UTILITYDurable synthetic leather palm, breath-able air-mesh back, low-profile closure with woven elastic cuff, reinforced fingertips, Terry thumb brow wipe.

16273 MD - $13.8916274 LG - $13.8916275 XL - $13.89

720 $2205

PROFLEX TRADES WITH TOUCH CONTROLVisco-elastic gel polymer palm pad dampens shock and impact, Abrasion resistant, textured PVC on palm and fingers, three open fingers for detail work.

16183 MD - $22.0516184 LG - $22.0516185 XL - $22.05

740 $3499

PROFLEX FIREAND RESCUE ROPEDouble-reinforced, EVA-padded rope zone with rope channel, double-needle Kevlar stitching, double layer Amara palm and fingers, adjustable wrist cinch anchor.

17803 MD - $34.9917804 LG - $34.9917805 XL - $34.99

710 $2275

PROFLEX FULL FINGER TRADE Visco-elastic gel polymer palm pad to dampen shock and impact, abra-sion resistant, textured PVC on palm and fingers, breathable, 3-layer stretch spandex with neoprene knuckle pad, flex zones for added comfort, reinforced fingertips for optimal durability. Also available in cut/puncture resistant (CR).

16153 MD - $22.7516154 LG - $22.7516155 XL - $22.75

730 $4329

PROFLEX FIRE AND RESCUE PERFORMANCE Keprotec reinforcement on palm, fingers and thumb saddle, durable synthetic leather on fingers, thumb, and palm, double-needle Kevlar stitching, PVC-reinforced fingertip gripping zones, stretch spandex shell for comfort and fit, EVA knuckle pad with reflective pattern, EVA palm padding to damp shock impact, lime.

16363 MD - $43.2916364 LG - $43.2916365 XL - $43.29

Black.

16383 MD - $43.2916384 LG - $43.2916385 XL - $43.29

816 $2099

PROFLEX THERMAL FLIP-TOP MITTENSConverts from mitten to fingerless glove for cold weather detail work. Flip-top fingers and thumb secured open with velcro tabs, durable polyester knit outside, windproof, water repellent micro fleece inside, double layer palm with synthetic suede anti-slip grip, soft, polyester fleece cuff.

16073 MD - $20.9916074 LG - $20.9916075 XL - $20.99

GLOVES \\ SAFETY WEAR


K52 $3595

PETZL CORDEXBELAY & RAPPELLightweight, made from natural, high-quality leather, double layered in high-wear areas, breathable nylon back, neoprene cuff with velcro closure.

K52ST SM - $35.95K52MT MD - $35.95K53LT LG - $35.95K52XLT XL - $35.95

K53 $4595

PETZL CORDEX PLUSBELAY & RAPPELMedium weight, made from goat skin, double layered in high-wear areas, padded palm, leather back with abra-sion resistant nylon, neoprene cuff, velcro closure.

K52ST SM - $45.95K52MT MD - $45.95K53LT LG - $45.95K52XLT XL - $45.95

925FX $3199

PROFLEX DORSAL IMPACT-REDUCINGReflective, TPR armor on knuckles, fingers and carpal bone for impact protection, pinch injury prevention, and blow deflection, non-slip finger and thumb grippers. Also avail-able in waterproof (WP), OutDry waterproof (OD), and cut/puncture resistant (CP).

16053 MD - $31.9916054 LG - $31.9916055 XL - $31.99

750 $3695

PROFLEX AT-HEIGHTSDouble layer palm and fingertips, EVA foam padded upper palm, base and middle digit sections, rugged stretch spandex shell, perforated knuckle pad and cuff.

16443 MD - $36.9516444 LG - $36.9516445 XL - $36.95

40063 $3575

KLEIN HEAVY-DUTYPROTECTIONAccordion knuckle panel reduces impact, TPR impact absorbing finger protection, non-slip finger and thumb grippers, synthetic leather with breathable mesh.

16443 MD - $35.7516444 LG - $35.7516445 XL - $35.75

550 $1019

OK-1 FULL FINGER ANTI-VIBRATIONMade from full-grain pigskin, spandex thumb and back, foam padded palm, 4-way stretch nylon back, hook & loop closure, absorbs and dissipates vibration.

550M MD - $10.19550L LG - $10.19550XL XL - $10.19

GL22304 $2685

PMI ROPE TECHNICIANSynthetic leather palm base layer, cowhide layer finger wear points and palm, ergonomically shaped, two-way stretch spandex on top and fingers.

GL22303 MD - $26.85GL22304 LG - $26.85GL22305 XL - $26.85

GL22702 $5495

PMI RESCUETECHNICIANFlame resistant, high level of breath-abilily to reduce heat stress of wearer, made of 60% Kevlar, 20% cow grain, and 20% goat grain, certified NFPA.

GL22702 MD - $54.95GL22703 LG - $54.95GL22704 XL- $54.95

SAFETY WEAR // PROTECTIVE EYEWEAR

11540 $849

3M METALIKS Polycarbonate blue mirror lens, anti-fog hardcoat resists fog, scratches and many chemicals, matte gray nickel frame, adjustable nose bridge, spatula style temples with soft tips, ANSI Z87+ compliant.

FF132 $1499

FORCEFLEXTranslucent orange, gray anti-fog dual lens design, Duramass scratch-resistant coating, bayonet temples, 99.9% UV protection, ANSI Z87+ compliant.

11328 $329

3M VIRTUAHigh wraparound coverage, polycarbonate construction, indoor/outdoor mirror hard coat lens, scratch-resistant, contoured temples, 99.9% UV protection, ANSI Z87+ compliant.

S2451 $1249

UVEX TOMCATGunmetal frame, gray hardcoat lens, impact-resistant polycarbonate lenses, flexible rubber temple grips, adjustable saddle nose pads, 99% UV protection, ANSI Z87+ compliant.

3000303 $525

JACKSON SAFETY VISIOSilver temple, clear lens, one-piece polycarbonate front with adjustable temples, wrap-around protection, 8-base curve, 99.9% UV protection, ANSI Z87+ compliant.

3016311 $899

SMITH & WESSON EQUALIZERBlue frame, blue mirror lens, sport-grip temples eliminate slippage, dual lenses with an 8-base curve, wrap-around protection, 99.9% UV protection, ANSI Z87+ compliant.

FF232 $1499

FORCEFLEX 2 Translucent yellow, black rubber, gray lens, Thermo Plastic Urethane frame allows the frame to flex and fit individual faces from large to small, superior resistance to scratches, ANSI Z87+ compliant.

HD801 $1395

HARLEY DAVIDSON 800Blue mirrored polycarbonate lens, double 9-base frameless design, bar & shield logo and trailing flame design on silver temples with Harley-Davidson name engraved on lens, ANSI Z87+ compliant.

3020121 $679

JACKSON NEMESIS INFERNOSleek, sporty, lightweight design with soft touch temples for added comfort, single lens wrap-around protection, neck cord included, 99.9 percent UV protection, ANSI Z87+ compliant.


COOLING \\ SAFETY WEAR


5155 $4099

CHILL-ITS LOW PROFILEHYDRATION PACK420D nylon shell stands up to long term wear and tear, zip-up cap cover keeps debris and contaminants at bay, closed cell insulation keeps water cool for hours, TPE polymer bladder for water that tastes like water, not plastic, big mouth opening for simple filling and cleaning, 70 oz. (2 liter) capacity.

5155HV Hi-Vis - $45.996715 $199

CHILL-ITS EVAPORATIVE COOLING HARD HAT PADLightweight, cooling acrylic polymers, velcro closures, conveniently attaches to hard hat suspension headband, solid blue

6716 Liner - $2.496717 Pad with neckshade - $3.29

6602 $999

CHILL-ITS EVAPORATIVE COOLING TOWELDampen this synthetic space age towel to create a cooling aid significantly colder than ambient air. Advanced PVA ma-terial holds water without feel-ing heavy, super-evaporative, wear for hours or wipe off for quick relief, simply re-wet the towel to reactivate, machine washable, comes with reusable container for storage.

6710 $399

CHILL-ITS EVAPORATIVE COOLING TRIANGLE HATActivated polymers bring cooling power where you need it most. Activate by soaking in water for 2-5 minutes, re-usable: just soak in water to re-activate, tie closure.

Available patterns: Stars & Stripes, Camou-flage, Red Western, Navy Western, Solid Blue

6705 $199

CHILL-ITS EVAPORATIVE COOLING BANDANAActivated polymers bring cooling power where you need it most. Activate by soaking in water for 2-5 minutes, re-usable: just soak in water to re-activate, velcro closure.

Available patterns: Stars & Stripes, Camouflage, Red Western, Navy Western, Solid Blue, Canadian Flag, Mexican Flag

6700 $199

CHILL-ITS EVAPORATIVE COOLING BANDANAActivated polymers bring cooling power where you need it most. Activate by soaking in water for 2-5 minutes, re-usable: just soak in water to re-activate, tie closure.

Available patterns: Denim, Stars & Stripes, Camouflage, Red Western, Navy Western, Solid Blue, Canadian, Flag, Mexican Flag, Barbwire, Flames, Skulls, Grab Bag

SM152500 $11770

SMC 4” STAINLESS STEEL PULLEYHigh efficiency sealed ball bearings, matched double-bend side plates help eliminate compression under load.

P50A $5995

PETZL RESCUE PULLEYFor rescue professionals, designed to maneuver heavy loads or for intensive use, large diameter sheave mounted on sealed ball bearings for excellent efficiency.

P66A $9295

PETZL GEMINI PULLEYSpecial side plates designed for use with a Prusik friction hitch in progress capture systems, Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems.

P05W $2995

PETZL FIXE PULLEYFixed side plates for quick installation and coupling with rope clamp, made for hauling systems and deviations, sheave mounted on self-lubricating bushings.

P51D $11500

ROCK EXOTICA OMNI-BLOCK PULLEYDouble, swivel pulley - replaces a pulley, carabiner and swivel and is lighter, less expensive and saves vertical space.

SM154900 $13500

SMC ADVANCE TECH HX DOUBLE PULLEYIntegrated Cam for progress capture with-out the need of Prusiks, high efficiency sealed ball bearing, one-handed operation.

P67 $17900

PETZL KOOTENAY KNOT-PASSING PULLEYVoluminous rope channel allows the passage of joining knots, large diameter sheave mounted on sealed ball bearings for excellent efficiency, locking pins on the sheave allow use of the pulley as an anchor.

P51 $13500

PETZL PRO TRAXIONIntegrated progress capture device can be used as a pulley or rope clamp, lockable mov-ing side plate for easy rope installation, for use with ropes from 8 to 13 mm in diameter.

P03A $2395

PETZL MOBILE PULLEYLightweight, compact pulley, designed for hauling systems and deviations, sheave mounted on self-lubricating bushings for efficiency.

P65A $12600

PETZL TWIN PULLEYHigh strength, high efficiency double Prusik pulley, special side plates for use with a Prusik friction hitch in progress capture systems.

RIGGING // PULLEYS


ALL WAY 1’ WIRE ROPE SLING

LIFTEX 3’ PRO-EDGE PREMIUM POLYESTER ENDLESS WEB SLING

LIFTEX 3’ ROUNDUP ENDLESS ROUND SLINGContinous loop of 100% polyester fiber, double polyester woven jacket to protect the load-bearing fibers from damage. Each sling has a tough, resilient tag for quick and easy identification.

LIFTEX 3’ PRO-EDGE PREMIUM POLYESTER EYE AND EYE WEB SLING

C40 $795

PETZL ANNEAUWebbing loop, also available in black, MBS 5,000 lbs.

C40 60 60cm - $7.95C40 80 80cm - $9.95C40 120 120cm - $10.95C40 150 150cm - $12.95

C06 $1195

PETZL FIN’ANNEAUUltralight dyneema sling, very abrasion resistant, 8mm width, MBS 5,000 lbs.

C06 60 60cm - $11.95C06 120 120cm - $15.95C06 180 180cm - $23.95

C07 $795

PETZL ST’ANNEAUDyneema sling, lighter and more flexible than nylon slings, very abrasion resistant, 12mm width, MBS 5,000 lbs.

C07 24 24cm - $7.95C07 60 60cm - $10.95C07 120 120cm - $15.95

SLINGS \\ RIGGING

PART WIDTH VERT. STRENGTH PRICE +/FT

MS14 1/4” .65 tons $10.25 $1.00

MS516 5/16” 1 tons $13.65 $1.50

MS38 3/8” 1.4 tons $15.28 $1.75

MS716 7/16” 1.9 tons $16.49 $1.75

MS12 1/2” 2.5 tons $17.99 $2.00

MS916 9/16” 3.2 tons $21.50 $2.25

MS1 1” 9.8 tons $64.40 $5.50

PART WIDTH COLOR VERT. STRENGTH PRICE +/FT

ENR1 0.6” PURPLE 2,600 lbs $8.50 $2.00

ENR2 0.8” GREEN 5,300 lbs $10.25 $2.55

ENR3 1” YELLOW 8,400 lbs $13.50 $3.45

ENR4 1.2” TAN 10,600 lbs $15.30 $4.00

ENR5 1.3” RED 13,200 lbs $19.90 $5.30

ENR6 1.4” WHITE 16,800 lbs $21.95 $6.10

ENR7 1.75” BLUE 21,200 lbs $27.39 $7.65

ENR8 (6’) 2” ORANGE 25,000 lbs $72.84 $11.55


EN2-91P 1” 6,200 lbs $7.89 $1.50

EN2-91P2 2” 12,200 lbs $12.25 $2.50

EN2-91P3 3” 16,300 lbs $18.65 $4.15

EN2-91P4 4” 20,700 lbs $22.75 $5.25


EE2-91P 1” 3,200 lbs $6.25 $0.75

EE2-92P 2” 6,400 lbs $9.99 $1.25

EE2-93P 3” 9,300 lbs $12.99 $2.00

EE2-94P 4” 12,000 lbs $24.65 $3.75


RIGGING // HARDWARE

WIRE ROPE

JET CHAIN LEVER HOISTS

SWIVEL HOOKS

EARTH ANCHORSPART SIZE TYPE PRICE/FT

WR-125 1/8” Galvanized $0.95

WR-380 3/8” Galvanized $0.75

WRS-156 5/32” Stainless Steel $0.95



PART CAPACITY (TONS) TAKE UP PRICE

187506 1/2 10’ $180.00

187607 3/4 10’ $240.00

187611 1-1/2 10’ $300.00

187716 3 10’ $490.00

PART WORK LIMIT (TONS) PRICE

EH1TASLP 1 $24.00

EH112TASLP 1.5 $26.00

EH2TASLP 2 $30.00

EH3TASLP 3 $35.00

EH5TASLP 5 $40.00

EH7TASLP 7 $84.95

EH11TASLP 11 $150.00

PART SIZE TYPE VERT STRENGTH PRICE

ES-40 30” Painted 1,400 lbs $17.85

EG-40 30” Galvanized 1,400 lbs $19.95

ES-60 48” Painted 4,000 lbs $23.95





SNATCH BLOCKS

EYE & EYE TURNBUCKLES

BOLT TYPE SAFETY SHACKLES

PART STYLE WORK LIMIT (TONS) CABLE SIZES PRICE

SB3H Hook 2 5/16” & 3/8” $45.00

SB3S Shackle 2 5/16” & 3/8” $45.00

SB3TB Tailboard 2 5/16” & 3/8” $42.50

SB412H Hook 4 3/8” & 1/2” $80.00

SB412S Shackle 4 3/8” & 1/2” $83.00

SB412TB Tailboard 4 3/8” & 1/2” $75.00

SB6H Hook 8 5/8” & 3/4” $135.00

SB6S Shackle 8 5/8” & 3/4” $141.00

SB6TB Tailboard 8 5/8” & 3/4” $110.00

SB8H Hook 8 5/8” & 3/4” $179.00

SB8S Shackle 8 5/8” & 3/4” $185.00

SB8TB Tailboard 8 5/8” & 3/4” $150.00

PART SIZE (A) WORK LIMIT (TONS) PIN DIAM. (B) WEIGHT (C) (D) (E) (F) PRICE

SHA38LRBT 3/8” 1 7/16” .33 lbs 1.44 .63 .91 1.00 $3.00

SHA12LRBT 1/1” 2 5/8” .79 lbs 1.88 .81 1.31 1.25 $5.75

SHA58LRBT 5/8” 3-1/4 3/4” 1.68 lbs 2.44 1.06 1.56 1.69 $9.50

SHA34LRBT 3/4” 4-3/4 7/8” 2.22 lbs 2.88 1.19 1.88 1.94 $15.00

SHA78LRBT 7/8” 6-1/2 1” 3.95 lbs 3.38 1.44 2.13 2.19 $18.75

SHA1LRBT 1” 8-1/2 1-1/8” 5.66 lbs 3.81 1.69 2.38 2.63 $27.75

SHA118LRBT 1-1/8” 9-1/2 1-1/4” 8.27 lbs 4.25 1.75 2.63 2.88 $32.00

SHA114LRBT 1-1/4” 13-1/2 1-3/8” 11.71 lbs 4.69 2.00 3.00 3.13 $49.50

SHA138LRBT 1-3/8” 17 1-1/2” 15.83 lbs 5.31 2.13 3.25 3.50 $58.00

PART THREAD (A) /TAKE UP (B) WORK LIMIT (LBS) WEIGHT (C) (D) (E) (F) PRICE

TB386EEG 3/8” X 6” 1,200 .76 lbs .34 1.12 .53 11.47 $8.50

TB129EEG 1/2” X 9” 2,200 1.13 lbs .44 1.44 .72 16.08 $14.50

TB589EEG 5/8” X 9” 3,500 2.83 lbs .50 1.75 .88 17.68 $27.00

TB349EEG 3/4” X 9” 5,200 4.61 lbs .62 2.09 1.00 19.38 $29.50

TB7812EEG 7/8” X 12” 7,200 7.22 lbs .75 2.38 1.25 23.32 $54.00

TB16EEG 1” X 6 “ 10,000 9.04 lbs .88 3.00 1.44 19.97 $64.50

TB11412EEG 1-1/4” X 12” 15,200 19.00 lbs 1.12 3.56 1.81 28.31 $118.50

TB11212EEG 1-1/2” X 12” 21,400 27.50 lbs 1.25 4.06 2.12 30.50 $240.00

TB224EEG 2” X 24” 37,000 85.25 lbs 1.75 5.75 2.69 51.69 $585.50


WINCH-HOISTS \\ RIGGING

C3081170 $1,99499

AB CHANCE CAPSTAN HOIST49 lbs, 115-Volt AC, rope speed 40 ft/min, 14 amperes motor current, 1000-lb. load rating. Four 3/8” mounting bolts are furnished with each unit. Mounting flange provides eight 3/8” tapped holes on 5 5/8” bolt circle.

C3081370 Rope speed 12 ft/min, 3,000 lb load rating, 1/2” bolts - $2,929.59

T3081506 $54999

AB CHANCE TRUCK MOUNTIncludes C3080903 and C3080890. Turntable design permits alignment without repositioning service vehicle.

C3080903 Swivel bracket - $434.99C3080890 C-Bracket - $164.99

C3081335 $43099

AB CHANCE BRACKETAll-purpose bracket for 1,000 lb series 90 hoists, includes two chain clamps.

C3081443 For 3,000 lb series - $694.99

C3080856 $13989

AB CHANCE ROPELOCKRope lock device for Series 90 hoists,includes mounting bolts and washers.

T3080999 $29895

AB CHANCE HITCH MOUNTFeatures a hole pattern specifically designed to fit the AB Chance Swivel Mount C3080903. For use with 12V, 115V and Hydraulic 1,000 lb rated hoists.

C3088017 Hardware for attachment - $9.99

30-12 $1,67499

MY-TE CAPSTAN HOIST800-lb single-line or 1,600-lb double-line lift, 115 Volt AC or 12 volt DC brake motor with triple brake system for instant stopping, low voltage 10’ pendant hand or foot control.

30-12 12 volt DC - $1,674.99300AB 115 volt AC - $1,847.65

148331 $21450

MY-TE SWIVEL MOUNTBolts to your truck bed with four 1/2” bolts. Capstan winch frame bolts to swivel mount using tapped mounting holes and hardware provided.

148452 $8499

MY-TE RECEIVERHITCH MOUNTBolts to the capstan winch-hoist in order to mount the unit us-ing a utility truck’s 2” receiver hitch. Shipped with hardware, but receiver hitch pin is not included.

148353 $49799

MY-TE POLE MOUNT ADAPTERSturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation.



BAGS & BUCKETS // LIFT BUCKETS

5734 $3829

ARSENAL PLASTIC BOTTOM CANVAS BUCKET10” height, 14” diameter, 2 inside pockets, load rated 75 lbs.

5734T With detachable top - $55.995744 With swivel - $45.155744T With detachable top & swivel - $62.59

5730 $7129

ARSENAL LEATHER BOTTOM CANVAS BUCKET12.5” height, 17” diameter, inside pocket,load rated 150 lbs.


5733 $4425

ARSENAL PLASTIC BOTTOM CANVAS BUCKET12.5” height, 15” diameter, inside pocket, load rated 100 lbs.


5633 $4425

ARSENAL SYNTHETIC LEATHER BOTTOM NYLON BUCKET10” height, 14” diameter, 2 inside pockets, load rated 100 lbs.


5736 $4709

ARSENAL TAPERED PLASTIC BOTTOM CANVAS BUCKET12.5” height, 13” diameter, 15 inside pockets, load rated 75 lbs.


5732 $7605

ARSENAL TALLLEATHER BOTTOM CANVAS BUCKET10” diameter, 28” height, 2 inside pockets, load rated 125 lbs.

5732T With detachable top - $94.29

5744 $5409

ARSENAL PLASTIC BOTTOM CANVAS BUCKET10” diameter, 14” height, 2 inside pockets, swivel, detachable safety top, load rated 75 lbs.

5744T With detachable top - $62.59

5630 $7129

ARSENAL SYNTHETIC LEATHER BOTTOM NYLON BUCKET12.5” diameter, 17” height, inside pocket, load rated 150 lbs.


Swive

lCa

nvas

det

acha

ble to

pNy

lon d

etac

hable

top


LIFT BUCKETS \\ BAGS & BUCKETS

5171PS $5689

KLEIN TOOLS HEAVY-DUTY TAPERED WALL CANVAS BUCKET12” height,12” top diameter, 9” bottom diameter, 4 outside pockets, swivel.

5172PS 15 inside Pockets - $64.49

5109 $3529

KLEIN TOOLS WIDE-OPENING STRAIGHT WALL CANVAS BUCKET15” height, 12” diameter.

5109P With inside pocket - $39.295109S With swivel - $41.295109PS With inside pocket & swivel - $45.29

5113 $3595

KLEIN TOOLS TAPERED WALLCANVAS BUCKET13” height,12” top diameter, 9” bottom diameter.

5113S With swivel - $41.95

5144S $6599

KLEIN TOOLS OVAL CANVAS BUCKET10” height, 14” length, 7” width, 15 inside pockets, swivel.

5144 Without swivel - $61.99

5104CLR17 $9475

KLEIN TOOLS HEAVY DUTY TOP CLOSING CANVAS BUCKET17” height, 14” diameter, load rated 150 lbs.

5104CLR22 22” height - $99.995104CLR36 36” height, 8” width - $94.75

5106 $3459

KLEIN TOOLS STRAIGHT WALL CANVAS BUCKET14” height, 9” diameter.

5106P 2 inside pockets - $42.595106S With swivel - $40.59

5104 $6515

KLEIN TOOLS LEATHER BOTTOM CANVAS BUCKET17” height, 12” diameter.

5104S With swivel - $71.05

5109SLR $4549

KLEIN TOOLS ALL PURPOSE CANVAS WORK BUCKET15” height, load rated 150 lbs.

5103S $4419

KLEIN TOOLS TAPERED WALL CANVAS BUCKET12” height,12” top diameter, 9” bottom diameter, swivel.


BAGS & BUCKETS // CANVAS BAGS

5416TCP $2995

KLEIN TOOLS CANVAS TOP-CLOSING BOLT BAG12” height, 9” length, 5” width, loop belt connection.

5416TC 10” height - $28.49

5179 $1425

KLEIN TOOLS WATER-REPELLENT CANVAS POUCH9” height, 7.5” length, 3.5” width,loop belt connection.

5179S Snap connection - $14.25

84522 $3779

ELK RIVER CANVAS DEEP BOLT BAG WITH DRAWSTRING2.5”x10”x14” deep, tunnel loop belt connection, inside pocket.

84521 $3275

ELK RIVER CANVAS BOLT BAG WITH DRAWSTRING2.5”x9”x10” deep, tunnel loop belt connection.

84520 Without drawstring - $26.29

5725 $2595

ERGODYNE ARSENAL CANVAS BOLT BAG10” length, 5” width, 9” height, cinch-up top, 2 exterior tool loops, 25 lb load rated.

5728 13” height - $27.95

5141P $3039

KLEIN TOOLS EXTRA LARGE CANVAS UTILITY BAG5” depth, 10” length, 12” width, 9”x5” top diameter, snap belt connection, inside pocket.

5416 $1325

KLEIN TOOLS CANVAS BOLT & BULL-PIN BAG10” depth, 5” length, 9” width, nylon loop connections.

5416T Tunnel loop connection - $14.355416L Leather version- $39.35

5142 $2685

KLEIN TOOLS CANVAS UTILITY BAG9” length, 10” width, 8”x3” top diameter, snap belt connection, inside pocket.

5142P With inside pocket - $29.05

9504066 $4925

DBI SALA 11 POCKET TOOL BAGIncludes 4 main pockets for fasteners and tools and 5 smaller pockets for other items including a combo square and pry-bar holder, made of 1680D ballistic nylon, nickel plated metal strainers at the bottom.

9504072 $4759

DBI SALA 15 POCKET TOOL BAGIncludes 3 main pockets for fasteners and tools and 12 other pockets for vari-ous smaller tools. It also includes an iron hammer loop and a removable top pouch that reveals a tape measure bracket.

5518 $4479

ARSENAL 16 POCKET AERIAL TOOL POUCHAttaches to any belt while keeping tools and fasteners secure, top cover flap with hook and loop closure, 3 nickel-plated D-rings for tool lanyard attachment, storm drains, made of 1680D ballistic nylon.

5516 Buckle closure - $44.79

5817 $10879

ARSENAL MEDIUM OPEN FACETOOL ORGANIZER15.25”x9”x14”, opens on sides and top with a place for everything, 1680D ballistic polyester, 44 pockets, molded rubber base, detach-able phone holder, parts organizer & junk pouch.

5860 $4199

ARSENAL 56 POCKET BUCKET ORGANIZERConverts standard 5 gallon bucket into tool organizer, 1680D ballistic polyester, 56 pockets: 38 exterior, 18 interior, padded cordless drill holster, elastic strap for long-handled tools, hammer and tape loops.

55417 $8319

KLEIN TRADESMAN PRO ORGANIZER EXTREME ELECTRICIAN’S BAG16” height, 19” length, 6.5” width, 78 pockets for extreme tool storage, orange interior for easy tool visibility, wide center with removable pockets for easy access to tools, tough, durable molded bottom protects from the elements,1680d ballistic weave for durability, shoulder strap and handles for easy carrying.

55418 14” height, 17.5” length, 10” width, 55 pockets - $72.79


TOOL BAGS \\ BAGS & BUCKETS

55415 $4585

KLEIN TOOLS TRADESMAN PRO ORGANIZER 8” TOTE17” height, 8” length, 8” width, 20 pockets, orange interior, removable zipper bag,1680d ballistic weave for durability, handle for easy carrying.


BAGS & BUCKETS // EQUIPMENT BAGS

5120 $9419

ARSENAL LARGE WHEELED GEAR BAG30”x14”x14”, 600D polyester main material,1680D polyester base, molded wheels for safe and easy transport, 3 removable internal dividers for organization, molded retractable pull handle, padded and adjustable shoulder strap, heavy-gauge nylon stitching and heavy-duty zippers, material backing provides water protection.

5143 $5235

ARSENAL GENERAL DUTY BACK PACK15”x20”x12”, 600D polyester main material, 1680D ballistic polyes-ter base, top cover flap for protection from the elements, vented foam padding on back panel and shoulder straps, waist strap and buckle for added support, padded computer sleeve in main pouch.

5215 $4439

ARSENAL LARGE TRAUMA BAG 12”x14”x9” main hold, two 12”x3”x5” side pockets, great for larger kits, 600D polyester with PVC backing, adjustable internal dividers, blue or orange, reflective stripe, 1690 ci.

5080L $2135

SCBA MASK BAG8”x8”x14”, smart storage and protection of vital respirator masks, 1000D nylon, double-coated polyurethane, spring loaded steel clasp at-taches to web gear or belt, drawstring opening and barrel lock closure, fits most masks, brushed poly fleece lining, reflective stripe.


EQUIPMENT BAGS \\ BAGS & BUCKETS

6565355 $3495

GME SUPPLYHEAVY DUTY DUFFLE BAG29.5” long, 12” diameter, rugged 600 denier coated polyester, water resistant shell, heavy gauge zipper, adjustable carrying strap.

3025 $5795

GME SUPPLY DELUXE GEAR BAG29”x17”x16”, huge 4.5 cubic ft. interior storage, four outside pockets, 600 denier - PU coated, polyester duck fabric, shoulder straps, red.

3050 Black - $57.95

RB44022 $5949

PMI X-LARGEROPE PACK23” length, 16” width, double sewn seams, drawstring closure, 1” tubular handles with rope insert, 5/8” grommet on the side of the bag, padded shoulder straps. Additional sizes available.

RB44058 Black - $59.49RB44057 Blue- $59.49RB44055 Orange- $59.49

5181ORA $9750

KLEIN TOOLS VINYL EQUIPMENT BAG20” height, 24” length, 10” width, 2 large outside pockets with Velcro fastening, adjustable padded shoulder strap, durable, double-stitched plastic bottom, 2 heavy-duty slide-action buckles close bag, orange.

5182BLA Black - $107.85

RB44031 $7899

PMI RIGGERS BAG24” length, 11” width, 12” height, jumbo main compartment, 6 zippered compartments, 1000 denier heavy coated Cordura, detachable shoulder strap, padded handles, clear ID holder.

5180 $10309

KLEIN TOOLS EXTRA-LARGE GEAR BAG18” depth, 24” length, 10” width, orange vinyl-coated nylon fabric bag, bottom reinforced with 1/4” (6 mm) plywood, nylon-web handles extend around bag for extra support, wide opening steel frame is securely riveted in top of bag, extra flap for storm protection.

5005 $5729

ARSENAL LARGEF & R GEAR BAG16”x21”x15”, 1000D nylon, double-coated polyurethane, maltese cross, heavy duty #10 zippers, 2” webbing handle and shoulder straps, Grab `n Go pull strap and removable shoulder strap.

Supply Co

PART # HOT LATCH # SPRING # MIN - MAX CABLE DIAMETER MAX SAFE LOAD JAW LENGTH WEIGHT PRICE

1613-40 1613-40H S1613-40H .12” - .37” (3.05 mm - 9.40 mm) 4,500 lbs 4-3/16” (106 mm) 3 lbs $136.45

1684-5F NA NA .16” - .550” (4.06 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.25 lbs $200.15

1684-5 1684-5H S1684-5H .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.25 lbs $200.15

1692-5 NA NA .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.40 lbs $200.15

1684-74 NA S1684-74H .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.30 lbs $198.65

1628-16 NA NA .31” - .62” (7.87 mm - 15.75 mm) 15,000 lbs 7-1/4” (184 mm) 15.30 lbs $375.85


1628-18 NA NA .75” - 1.00” (19.05 mm - 25.40 mm) 15,000 lbs 7-1/4” (184 mm) 15.70 lbs $419.49

3210 $2945

KLEIN ERECTION WRENCHForged from select alloy steel to with-stand high-leverage and heavy loads, extra-heavy-duty head area gives maximum strength and durability, continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding, extra-large hub area works on larger diameter holes than other wrenches.

3219 1/2” regular nut - $29.453221 5/8” regular nut - $31.253222 3/4” regular nut - $34.853223 7/8” regular nut - $44.693224 1” regular nut - $49.993210 1/2” heavy nut - $29.453211 5/8” heavy nut - $31.253212 3/4” heavy nut - $34.853213 7/8” heavy nut - $44.693214 1” heavy nut - $49.99

3239 $6199

KLEIN TOOLS ADJUSTABLE SPUD WRENCHVersatile wrench fits all nuts and bolts to 1-1/2” (38 mm), eliminates the need for carrying several fixed-size wrenches.

3238 $6875

KLEIN TOOLS 1/2” DRIVE RATCHETING CONSTRUCTION WRENCHAccepts 1/2” square-drive hex socket, reversible ratchet, industrial black finish for corrosion resistance.

3261 $549

KLEIN TOOLS BARREL-TYPE DRIFT PINMachined from quality alloy steel, tapers are uniform and blend into body diameter, 13/16” max diameter, 8” length.

3262 15/16” max diameter - $6.25

93116 $1475

KLEIN TOOLS MAGNETIC TAPE MEASURENylon-coated hardened steel blade resists abrasion and wear for long life, built-in shock absorber to protect blade tip, durable steel belt clip, 16’.

93125 25’ - $17.75

3255 $1775

KLEIN TOOLS BROAD-HEAD BULL PINForged, heat-treated bull pin increases efficiency by providing a larger striking surface, 1-1/4” top diameter, 13-3/4” length.

3256 10” - $18.79

TOOLS // KLEIN TOOLS

AIRCRAFT CABLE, EXTRA-HIGH-STRENGTH, MESSENGER, AND GUY STRAND CHICAGO GRIPSDouble V grooves provide four-point contact, reducing chance of slipping and providing proper alignment of wire and cable. (1684-5F is a Single V with file insert.)

1613-40


PART # HOT LATCH # SPRING # MIN - MAX CABLE DIAMETER MAX SAFE LOAD JAW LENGTH WEIGHT PRICE

1613-40 1613-40H S1613-40H .12” - .37” (3.05 mm - 9.40 mm) 4,500 lbs 4-3/16” (106 mm) 3 lbs $136.45

1684-5F NA NA .16” - .550” (4.06 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.25 lbs $200.15

1684-5 1684-5H S1684-5H .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.25 lbs $200.15

1692-5 NA NA .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.40 lbs $200.15

1684-74 NA S1684-74H .218” - .550” (5.54 mm - 13.97 mm) 8,000 lbs 5” (127 mm) 6.30 lbs $198.65



1628-18 NA NA .75” - 1.00” (19.05 mm - 25.40 mm) 15,000 lbs 7-1/4” (184 mm) 15.70 lbs $419.49

PART # MIN - MAX CABLE DIAMETER MAX SAFE LOAD JAW LENGTH WEIGHT PRICE

1685-20 .157” - .875” (4 mm - 22 mm) 4,500 lbs 2-1/2” (64 mm) 3 lbs $169.89

1685-31 .625 - 1.250” (16 mm - 32 mm) 7,500 lbs 4-1/2” (114 mm) 5 lbs $219.35

PART # MIN - MAX CABLE DIAMETER MAX SAFE LOAD WEIGHT PRICE

1625-20 .28” - .75” (7.11 mm - 19.05 mm) 8,000 lbs 4 lbs $100.35

1625-207/8 .38” - .88” (9.65 mm - 22.35 mm) 8,000 lbs 4 lbs $111.89

1625-201 .50” - 1.00” (12.70 mm - 25.40 mm) 8,000 lbs 4 lbs $130.35

J2000-9NE $4169

KLEIN TOOLS HIGH-LEVERAGE PLIERSSide-cutting, cuts ACSR, screws, nails and most hardened wire. Induction-hardened cutting knives.

J2000-9NETP Fish tape pulling - $43.77

J2000-9NECR Connector crimping - $48.99

63524 $17065

KLEIN TOOLSBOLT CUTTERHeavy-duty with steel handles, 4,000 lbs jaw pressure with 50 lbs hand pressure, 24”.

63530 30”- $193.7963536 36” - $231.15

J203-8 $3145

KLEIN TOOLS HEAVY-DUTY LONG-NOSE PLIERSSide-cutting, hot-riveted joint ensures smooth action.

J203-8N + Stripping - $32.55

63041 $12045

KLEIN TOOLS CABLE CUTTERLightweight, replaceable hook-jaw blades grab and hold cable while shear-cutting action makes clean cuts, 25.5”.

63045 32” - $142.09

J2000-28 $3335

KLEIN TOOLS HIGH-LEVERAGE PLIERSDiagonal-cutting, 36% greater cutting and gripping power than other plier designs.

J2000-48 Angled head - $34.85

818-16 $2649

KLEIN TOOLS HEAVY-DUTY HAMMERCurved claw gives maximum nail-pulling leverage, polished, forged, tempered-steel head.

818-20 20 oz head -$30.25

44052BLK $3555

KLEIN TOOLS POCKET KNIFETanto blade is AUS 8 stainless-steel hardened to 58-59 Rc, black anodized-aluminum handle for corrosion resistance, reversible thumb stud, 3/4” blade.

56002 $3089

KLEIN TOOLS FISH TAPEPermanent, laser etched 1’ increments, polypropylene case/handle, raised finger grips, 1/8” 65’.

56003 125’ - $45.7556004 240’ - $63.95

80028 $29999

KLEIN TOOLS 28-PIECE ELECTRICIAN’S TOOL SETContains (4) types of pliers, (8) types of screwdrivers, (7) nut drivers, an adjustable wrench, a power-return rule, a torpedo level, one crimper/cutting tool, one wire stripper/cutter, a utility knife and protective eyewear.

80141 41 Piece Journeyman kit - $568.99

PARALLEL JAW GRIPSDesigned with a round inside-jaw contour for maximum contact to minimize cable defor-mation, lower jaw is serrated to firmly grip insulated cables and conductors, includes a latch that prevents the grip from falling in case of jaw disengagement from the cable, large diameter eye.

WIRE ROPE HAVEN’S GRIPSDesigned for use when light, compact grip is desired and where cable deformation is not a factor, gripping pressure of the knurled jaw is applied to 1/4” (6.35 mm) cable area, all 1625 series have a swing latch to help hold cable in the jaw.

1685-31 1685-20

1625-20

KLEIN TOOLS \\ TOOLS


KT36148$77499

PMI TOWERPACK IIDesigned to meet the require-ments of mast and tower climbers who need to evacuate themselves or recover an injured worker. Includes (1) 11mm Access Pro rope, 164’ length (1) 1m steel anchor sling, (1) Hurricane Pro, (4) steel ANSI rated carabiners, (1) PowerLock rescue descender, (1) pair rescue shears, (1) casualty attachment sling, (1) carrying bag.

KT36149 217’ - $819.99KT36150 328’ - $894.99KT36154 400’ - $999.99

RESCUE // EQUIPMENT

440$3995

YATES 2 TO 1 HEAVY DUTY PICK-OFF/TRANSFER STRAPUsed for patient pick-off situations. Configuration of pick-off strap allows 2 to 1 mechanical advan-tage for easier handling of patient. Made using 1.75” heavy duty resin treated webbing for high protection from abrasion and wear. Strength 5000 lbf, maximum length 7’.

19805$1,28699

ELK RIVEREZE-MAN AUTO DESCENT / SELF-RESCUE DEVICE For emergency high-angle rescue from a wide range of elevated work areas. Made of high-quality lightweight machined aluminum, automatic controlled descent of 3’ per second, bidirectional design - one end descends as the other ascends, 2 person rated at 550 lbs, available in 50’ increments.

19805 50’ - $1,286.9919810 100’ - $1,399.9919815 150’ - $1,499.89

8516294$14789

DBI SALA ROLLGLISS RESCUE LADDERRescue ladder, 8 ft. (2.4m) section, synthetic, with 3 connecting carabiners and carrying bag. Extra sections can be added together for longer length.

8516316 Rollgliss ladder anchor - $84.65

3300050 $1,28585

DBI SALA RESCUMATICAUTOMATIC DESCENT CONTROL DEVICEProvides safe, automatic controlled descent from overhead cranes, towers, buildings, or other heights. Includes body support, anchoring carabiner, 50’ rope spool and bag. Safely lowers endangered person(s) at 3’ per second.

3300100 100’ - $1,385.953300150 150’ - $1,486.793300200 200’ - $1,586.15

KT36128 $15649

PMI / SMC JR HAUL SYSTEMPre-rigged 4:1 or 5:1 haul system, includes (2) SMC mini JR pulleys, (2) SMC aluminum carabin-ers, (1) 10m, 7mm tuff cord, (1) 2m, 5mm acces-sory cord (1) 5 mm oval screw link (1) storage bag. Weighs 1.85 lbs (840g).

KT36106 $1,09999

PMI SCAFFPACKIncludes (1) 11mm Access Pro rope with eye for scaffold hook, 82’ length, (1) casualty attachment hook, (2) ANSI rated steel carabiners, (1) ANSI rated steel captive eye carabiner, (1) Quadra rescue device, (1) haul cam pulley, (1) vector mobile rope grab, (1) RescueMate pole, (1) pair EMT shears, (1) steel anchor sling, 1m, (1) steel anchor sling, 2m, (1) casualty attachment lanyard, (1) accessory carabiner, (1) carrying bag.

36113 164’ - $1,178.7536114 200’ - $1,229.1536115 328’ - $1,336.25


1103350$23579

DELTA II CROSSOVER TOWER CLIMBING HARNESSCross-over style, front D-ring, belt with 4” wide pad and side D-rings, two tool pouch D-rings, seat sling with positioning D-rings, tongue buckle legs.

1103355 SM - $235.791103351 MD - $235.791103350 LG - $235.791103352 XL - $235.79

PATIENT CARE \\ RESCUE

PE42110 $2,26999

PMI LATERAL TUFF-KELLYWeighted realistically and designed for life-like move-ment, can be used in a wide variety of extrication training scenarios. Transport and positioning are made easy with a 5cm diameter eye-bolt on head and a positioning waist belt. Includes coveralls and work boots, weighs 100 lbs.

PE42111 155 lbs - $2,489.99PE42112 175 lbs- $2,594.99

PE42175 $1,19499

PMI WRAP EVACIncludes sliding head harness, removable backboard, heavyweight handles for carrying, 4 quick connect straps, adjustable harness straps, detachable skid plate. Allows patient to be completely secured. Harness can be used without the backboard for confined space in vertical or horizontal configurations.

PE42041$59595

PMI CASCADE PROFESSIONAL SERIESIncludes 4 articulating lift point, 3/4” frame and supporting cross members and 3/8” secondary railing, integral backboard, UV resistant polyethylene mesh liner, tapered or rectangular shape, one or two piece, two piece version available with PMI FAST installed.

Stainless steel one piece.

PE42041 Tapered - $595.95PE42116 Tapered with PMI FAST - $840.95PE42144 Rectangular - $595.95PE42151 Rectangular with PMI FAST - $840.95

Stainless steel two piece.

PE42042 Tapered - $874.99PE42097 Tapered with PMI FAST - $1,119.99PE42145 Rectangular - $874.99PE42152 Rectangular with PMI FAST - $1,119.99

PE42021$9099

PMI CLASSIC SPYDERAdjustable 4 leg litter spider made from 10mm PMI Classic static rope and 6mm prusik cord tied on a forged O-ring. Legs are independently adjustable, user can add the PMI/SMC Deluxe or JR Haul System to convert this to a litter scoop system, comes with 4m long attendant line & storage bag.

019742-0029L $1829

NORTH CONSTRUCTION BULK FIRST AID KITIncludes assorted bandages, adhesive tape, antibiotic ointment pouch, antiseptic wipes, eye pad, first aid / burn cream with aloe, pointed forceps, gauze pads, in-stant cold pak, medical gloves, non-aspirin Pain-A-Rest, angled handle scissors, sting relief wipes, 5”x9” trauma pad. OSHA compliant, 10 person kit.

019743-0030L 25 person kit - $24.50019744-0031L 50 person kit - $49.79



CC2919 $3699

TOWERPLEX AVIATION WHITE TOWER PAINT(1 gallon) 100% acrylic emulsion coating formulated for use on galvanized antenna towers, dries quickly and has excellent weathering properties, meets Federal Standard 595 color #17875 White and complies with National Bureau of Standards report NBS1R75-663 and F.A.A. A/C70/7460-1H

5 gallons - $169.99

CC2920 $4575

TOWERPLEX AVIATION ORANGE TOWER PAINT(1 gallon) 100% acrylic emulsion coating formulated for use on galvanized antenna towers, dries quickly and has excellent weathering properties, meets Federal Standard 595 color #12197 Orange and complies with National Bureau of Standards report NBS1R75-663 and F.A.A. A/C70/7460-1H.

5 gallons - $219.95

CC2925 $5899

TOWERPLEX ACRYLIC BONDING PRIMER(1 gallon) 100% pure acrylic emulsion maintenance/shop primer that devel-ops barrier corrosion resistance, normally associated only with solvent-borne primers. This primer offers excellent adhesion to various substrates such as structural steel, aluminum, galvanize, concrete, masonry, and wood.

AA-4200 $5995

FAA IN-SERVICE ORANGE COLOR RANGE CHARTBy visually comparing the chart to the tower by way of the window on each page, one can de-termine whether it is necessary to repaint the tower or obstruction to bring the markings back into compliance. The chart is comprised of 18 technically matched and certified paint chips (nine per page) which represent the minimum and maximum color saturation, as well as limits for lightness, darkness, redness and yellowness compliances.

991912000 $499

INDUSTRIAL PAINTER’S HAND MITTThis lined glove is ideal for painting cellular communication towers, cell monopoles, angle steel, pipes, ornamental iron, hand railing and more both quickly and effi-ciently. Can also be used for cleaning.

TY127S $735

DUPONT TYVECK COVERALL PAINT SUITOffers an inherent barrier to particles down to 1 micron in size. Attached hood with elas-tic around face opening, designed to cover neck and chin and fit around respirator face mask, elastic opening wrist and ankle.

INDUSTRIAL COATINGS // PAINT & PRIMER


COLD GALV \\ INDUSTRIAL COATINGS

7008G $9985

CROWN COLD GALVANIZING COMPOUND(1 gallon) light gray, matte finish with 93% pure zinc in a dry film, can be easily sprayed, brushed, or dipped onto any metal surface, meets performance requirements of MIL-P-46105(MR), MIL-P-21035B, and DOD-P-21035A, withstands 2000 hours of 5% salt spray testing, designed for permanent protection, provides protection equal to or better than hot-dipped galvanizing, outstanding weld-through primer.

7007VG Low VOC gallon - $154.997007Q Quart- $29.997007 12 pack aerosol - $89.99

7007G $9985

CROWN BRITE COLD GALVANIZING COMPOUND(1 gallon) bright, glistening finish with 65% pure zinc in a dry film, can be easily sprayed, brushed, or dipped onto any metal surface, meets performance requirements of ASTM A-780-93A, good film integrity after 336 hours salt spray, designed for permanent protection, stops rust and corrosion on any iron or steel surface for protection equal to or better than hot-dipped galvanizing with the bright look of hot-dipped surfaces.

7007VG Low VOC gallon - $144.997007Q Quart- $28.997007 12 pack aerosol - $74.99

10003 $16489

ZRC COLD GALVANIZINGCOMPOUND(1 gallon) flat finish with 95% zinc in dry film, low VOC, equivalent to hot-dip galvanizing, withstands 3,000 hours salt spray testing, meets requirements of DOD-P-21035A , MIL-P-26915A, and ASTM A-780.

387SS $275

ANCHOR STAINLESS STEEL SHOE HANDLE WIRE BRUSHHeavy-duty industrial brush, unsurpassed wire fill and length, designed to out-work and out-last so called “economy” brushes.

1500-3 $979

3 INCH ECONOMY CHIP BRUSHNatural wood handle, natural white Chinese bristle, 3 in. brush width, disposable, easy to use. Pack of 12.

20013 $16999

ZRC GALVILITE GALVANIZINGREPAIR COMPOUND(1 gallon) shiny finish with 95% pure zinc in dry film, low VOC, matches hot-dip galvanizing, withstands 3,000 hours salt spray testing, meets requirements of DOD-P-21035A , MIL-P-26915A, and ASTM A-780.

1102385 $31299

DBI SALAEXOFITWIND ENERGY HARNESSVest-style harness with quick-connect buckle leg straps, PVC coated front, back, and side D-rings, sewn-in hip pad and belt with tool loops, replace-able lumbar protector, integrated trauma straps, built-in back and leg pad-ding, lanyard keepers.

1102385 SM - $312.991102386 MD - $312.991102387 LG - $312.991102388 XL - $312.99

1102340 $25499

DBI SALAEXOFIT WIND ENERGY HARNESSVest-style harness with quick-connect buckle leg straps, PVC coated front, back, and side D-rings, integrated trauma straps, built-in back and leg pad-ding, lanyard keepers,.

1102340 SM - $254.991102341 MD - $254.991102342 LG - $254.991102343 XL - $254.99

1113215 $36299

DBI SALA EXOFIT NEX GLOBAL WIND ENERGY HARNESSVest-style harness with aluminum front, back and side D-rings, locking quick-connect buckles, sewn-in hip pad with belt, replaceable lumbar protector, radio holster conveniently holds and protects a radio, cell phone, or other item like a Lad-Saf sleeve.

1113215 SM - $362.991113216 MD - $362.991113217 LG - $362.991113218 XL - $362.99

With tongue buckle legs.

1113175 SM - $357.991113176 MD - $357.991113177 LG - $357.991113178 XL - $357.99

With quick connect buckles, without body belt and back pad.

1113210 SM - $299.991113211 MD - $299.991113212 LG - $299.991113213 XL - $299.99

3403400$1,48479

DBI SALA SEALED SRL50’ of 3/16” galvanized steel wire rope, stainless steel and cast aluminum housing, environmentally sealed design, self adj-usting disc brake, reserve lifeline retention system, self-locking swivel snap-hook with impact indicator, swiveling anchorage loop, ANSI compliant.

3403500 85’ - $1,980.75

3403600 130’ - $2,724.99

3323100$1,92899

DBI SALAROLLGLISS R500 RESCUEAND ESCAPE DEVICE100’ rescue hub, humidity resistant case, (3) anchor slings, (4) carabiners, pulley, edge protector, rope grab, carrying bag, 3/8 in. super static kernmantle rope with connecting hardware at each end of the lifeline.

3323200 200’ - $2,068.993323300 300’ - $2,211.993323400 400’ - $2,353.99

1244760$20995

DBI SALAFORCE2 SHOCKWAVE WIND ENERGY LANYARD100% tie-off lanyard with elastic webbing, 3,600 lb hooks on leg ends, Tech-Lite rescue D-rings and a nylon shock pack with a PVC resist cover to protect against abrasion while climbing and descending, ANSI compliant.

INDUSTRY // WIND ENERGY


1100300 $31895

DBI SALAEXOFITDERRICK HARNESSVest-style, 18” dorsal D-ring extension, belt with back pad and lumbar D-ring, soft seat sling with positioning D-rings, pass-thru buckle connections at shoulders. Pictured with 1000570 derrick belt (sold separately).

1100300 SM - $318.951100301 MD - $318.951100302 LG - $318.951100303 XL - $318.95

Derrick belt.

1000572 SM - $158.791000573 MD - $158.791000570 LG/XL - $158.79

1113295 $48599

DBI SALA EXOFITNEX OIL AND GASHARNESSVest-style, 18” dorsal D-ring extension, derrick attachments, hip pad and belt with lumbar D-ring, rigid seat sling with lifting D-rings, integrated trauma straps, water repellent webbing, reflective material on front and back. Pictured with 1003221 derrick belt (sold separately).

1113295 SM - $485.991113296 MD - $485.991113297 LG - $485.991113298 XL - $485.99

Without seat sling, lifting D-rings off hips.

1113285 SM - $295.651113286 MD - $295.651113287 LG - $295.651113288 XL - $295.65

Derrick belt.

1003220 SM - $227.951003221 MD - $295.651003222 LG - $295.65

1106106 $27799

DBI SALA DELTA II DERRICKHARNESSVest-style harness, 18” dorsal D-ring extension, belt with hip pad and lumbar D-ring, soft seat sling with positioning D-rings. Pictured with 1000570 derrick belt (sold separately)

1106112 SM - $277.991106108 MD - $277.991106106 LG - $277.991106107 XL - $277.99

OIL RIGGING \\ INDUSTRY

7605060$23579

DBI SALA EZ-LINE RETRACTABLE HORIZONTAL LIFELINE SYSTEMRetractable lifeline is simply pulled out for installation and retracted with the built-in winch for dismantle. Customize your system length in any increment up to 60’. Provides hands free horizontal mobility and con-tinuous protection for 2 users. Entire system stores in an easy to carry case.

1244456$18879

DBI SALA SHOCKWAVE2 TWIN LEG LANYARD WITH D-RING FOR SRLSelf locking snap hooks at center and flat steel hooks (2-1/4” opening) at leg ends, additional D-ring extension enabling proper connection to an SRL when lanyard is attached to back D-ring of harness, stretches 4.5’-6’, ANSI compliant.

9500468$16245

DBI SALAOFF-SHORE LIFEJACKET FOR USE WITH HARNESSConstructed from CERTIFIED Hi-Vis orange fabric and 62 square inches of solas grade reflective tape. Foam filled head support collar with two vertical adjustable straps and hinged back panel. Polyvinyl chloride foam buoyant material provides a minimum buoyant force of 22 lbs. Universally sized, includes safety whistle.



INDUSTRY // ROOFING

05013 $9899

CONSTRUCTIONPLUS ROOFER’S KIT WITH REUSABLE ANCHORComplete roofer safety requirements in a convenient bucket! Keeps your company in full OSHA compliance. Kit includes: 1 D-ring harness (S-XL), 5/8” rope grab and snaphook, reusable roof anchor with nails, 50’ x 5/8” ConstructionPlus lifeline with snaphook and thimble eye, 3.6M gate. All contents meet ANSI A10.32-2004 and OSHA 1926.502

1200101 $29999

PROTECTA PRO-LINE TEMPORARY HORIZONTAL LIFELINE SYSTEM60’ lifeline with tensioner, shock absorber, bag, and two 6’ tie-off adaptors. Built-in shock absorber limits arresting forces during a fall and provides the user with a visual impact indicator, installs in seconds without special tools or equipment, fall arrest rated for two users, OSHA compliant. 2190011 $22615

PROTECTA SWIVELING ROOF ANCHORRemovable/reusable anchor for residential or commercial wood and metal frame struc-tures, allows for 360 degree rotation and unrestricted access on rooftops, can be installed on a flat or sloped roof, meets the latest OSHA and ANSI standards (SRL not included).

AD115B $21899

PROTECTA REBEL CABLE SRLLightweight and compact design weighs only 6.4 lbs,15’ in length, rugged aluminum and steel construction, swiveling anchorage loop, Kevlar/Nomex covered external shock pack, swiveling snap hook, meets the latest OSHA and ANSI standards.

2199803 $12735

PROTECTA ROOFER COMPLIANCE IN A CANReusable roof anchor with 5 point harness, rope grab and 50’ lifeline. Features designs that incorporate improved fit, updated colors, and durable yet lightweight construction. Protecta PRO gear provides greater comfort and added safety – which translates to reduced worker fatigue and increased productivity. Plus, each and every Protecta PRO lanyard now features 3,600 lb. gated hooks meeting ANSI Z359.


UTILITY \\ INDUSTRY

832-32$4099

KLEIN TOOLLINEMAN’S STRAIGHT CLAW HAMMERHeavy-duty, double-duty hammer drives lags and pulls big nails, special high-carbon steel head with solid, octagon-shaped driving end and thick, strong claw.

1200110$25299

DBI SALACYNCH-LOK REPLACEMENT STRAPInterchangeable replacement strap for distribution model Cynch-Lok.

1200111 For transmission model - $276.991200136 For web model - $214.29

1204075$39999

DBI SALA CYNCH-LOK FALL RESTRICTING POLE STRAPWeb distribution model, pole size (dia/circ): 5.5”/ 17.5”- 18.5”/58”, 4.9 lbs.

1204058 Web transmissionmodel, pole size (dia/circ): 5.5”/17.5”- 30.5”/96”, 5.4 lbs - $432.99

1204057 $40895

DBI SALA CYNCH-LOK FALL RESTRICTING POLE STRAPAllows user to easily hitch-hike poles and move past obstacles, interchangeable exterior straps, pinch free, ergonomic grips, abrasion resistant rope guard, stopping cleat and carabiner restrict a fall during a cut-out, distribution model, pole size (dia/circ): 5.5”/17.5”- 18.5”/58”, 4.8 lbs.

1204058 Transmission model, pole size (dia/circ): 5.5”/17.5”- 30.5”/96”, 5.3 lbs - $429.99

2104801 $81489

DBI SALA SAFLOK POLE CLIMBING FALL ARREST SYSTEMComes with anchor tube, 80’ of 5/8” high dielectric rope, installation/removal tool, carabiner, rope grab with integrated shock absorbing lanyard, and carrying bag, provides utility pole climbers with 100% fall protection.

1234070$19999

DBI SALAADJUSTABLEROPE POSITIONING LANYARDAbrasion resistant sleeve helps prolong product life, blue wear indicating core signals when product needs to be taken out of service, 2.2 lbs, 8’ length.

1204030$14869

DBI SALAADJUSTABLEWEBPOSITIONING STRAPDouble locking snaphook ends, 8,000 lb nylon strap webbing, built-in wear indicator shows a two ply red core when frayed or worn, 6’ length.

CN1986AR$27699

KLEIN TOOLPOLE CLIMBERS WITH GAFFSComplete set, 1-9/16” gaffs, 8”x8” cushioned, high-grade leather climbing pads, neoprene-impregnated nylon climber straps, 15”-19” adjustable length.

CN1986ARL 17”-21” length - $277.89

5266N$18695

KLEIN TOOLSEMI-FLOATING BODY BELTForged circle D-rings, double-riveted leather tool loops, 4 suspender rings, tape thong, two-way knife snap, glove-bag ring, meets all applicable safety standards.


8530257 $6,03325

DBI SALA CANTILEVER RESCUE SYSTEM KITVersatile piece of equipment for high-angle rescue operations over roof edges, parapets, guard rails, cliffs, bridges or other situations. Complete with 8513159 10 ft. tripod, 8515620 rigid wheel pad and attach-ment hardware, 8515631 weight rack kit, 8514540 leg support system and 8515150 top mount pulley. Features aluminum construction, quick mount bracket, adjustable height legs, telescoping legs, wheel pad, leg support system. Winch not included.

RC48018 $2195

PMI SUPERMANTLE ROPE PROTECTORBallistic nylon exterior with a durable interior layer of heavy canvas wrap completely around your stationary ropes to provide maximum protec-tion from sharp edges and abrasive surfaces. New easy open flap, reflective strip, tie off tab, 18”

24” - $23.9536” - $31.95

8515631 8515150

85809 $15229

ELK RIVER UNIVERSAL BOSUN’S SEATConsists of a 12”x24”platform seat constructed of 1” laminat-ed plywood and equipped with a four-point nylon suspension system, (2) bucket snaps on each side for attaching equipment, includes (2) 3/16” D-rings at attachment point and waist belt for proper fitting. Bosun’s seats are designed for suspension only.

INDUSTRY // WINDOW CLEANING

SG26086 $21899

PMI EDGEROLLER SYSTEMThree linked units with hard anodized aluminum side plates and two roller bars each. This lightweight and compact roller can be used linked together with the furnished screw links at sharp edges, or separated for long gradual breakovers. Efficient rollers, two 4” wide aluminum rollers, holes for permanent mounting, 5/8” steel axle.

85820 $15835

ELK RIVER DELUXEBOSUN’S SEATConsists of a 12” x 24” platform seat constructed of 1” laminat-ed plywood and equipped with a four-point nylon suspension system, (2) bucket snaps on each side for attaching equip-ment, includes (2) 3/16” D-rings at attachment point and waist belt for proper fitting.

85820 XS - $158.3585821 SM - $158.3585822 MD - $158.3585823 LG - $158.3585824 XL - $158.35


TOWER CLIMBING \\ INDUSTRY

90002 $69999

GME SUPPLY DELUXE TOWER CLIMBING KIT6 D-ring EagleTower LE tower climbing harness, safety helmet, 3/8” wire rope grab, 1x6’ adjustable web lanyard with snaphooks, 1”x3’ web lanyard with snaphooks, 1-1/4” x 6’ Flex NoPac shock absorbing twin leg lanyard, (2) 4”x2” steel carabiners with 1” gate, (2) 7”x3-3/4” dual action steel locking carabiners with 1-3/4” gate, Klein top-closing bull-pin & bolt bag, deluxe carry-all bag.

Upgrade available: Petzl Vertex Vent Helmet (+$90.00)

90000 $34999

GME SUPPLY BASIC TOWER CLIMBING KIT6 D-ring EagleTower LE tower climbing harness, 1-1/4”x6’ NoPac shock absorbing twin leg lanyard, 1x6’ adjustable web lanyard with snaphooks.

Upgrades available: MSA V-Gard Helmet (+$11.50), Petzl Vertex Vent Helmet (+$99.00), Deluxe Gear Bag (+$52.00), Heavy Duty Duffle Bag (+$30.00)

90005 $79499

GME SUPPLY EXOFIT NEX TOWER CLIMBING KITExoFit NEX tower climbing harness, 5/8” ErgoGrip adjustable positioning lanyard, 1-1/2”x6’ Flex NoPac shock absorbing twin leg lanyard, (2) 4x2” steel carabiners with 1” gate, 9”x5-1/2” Steel Carabiner with 2-1/4” gate.

Upgrades available: Petzl Vertex Vent Helmet (+$99.00), Petzl Alveo Vent Helmet (+$85.00), Deluxe Gear Bag (+$52.00), Heavy Duty Duffle Bag (+$30.00), Petzl Grillon Hook 2m (+$65.00)

Supply Co

APPAREL // PERFORMANCE

6463 $8265

CORE PERFORMANCE WORKWEAR THERMAL VESTWarm your core and keep complete range of motion. Especially good for cool temps or moving in and out of heated areas. Rugged 300D Polyester shell with PU coating, soft, warm fleece lining, Armortex reinforcement zones in heavy wear areas, storm flap front, YKK zippers, drawstring waist. Available in sizes S-3XL.

6465 $11595

CORE PERFORMANCE WORKWEAR THERMAL JACKETKeeps your fire lit in the deep freeze and allows remarkable range of motion. Rugged 300D Polyester shell with PU coating, soft, warm fleece lining, Armortex reinforcement zones in heavy wear areas, storm flap front, YKK zippers, drawstring waist and adjustable cuffs. Available in sizes S-3XL.

6480 $3359

CORE PERFORMANCE WORKWEAR BOTTOMSLower body temperature and moisture management. Wicking fabrics and venting for multi-climate comfort, anti-stink treat-ments help workers remain unscented, tagless waistband, soil release treatments make cleaning easy, 50+ UPF for protec-tion against harmful UV. Available in sizes M-3XL.


6310 $1685

TREX ADJUSTABLE ICE TRACTION DEVICEAdjustable one-piece traction device for shoes or boots delivers tenacious grip and stability. 10 rugged, heat-treated carbon steel studs, adjust-able cord cinches tight for a secure fit, stretchable rubber for fit and easy on/off, aggressive tread connects mid-foot and heel stud zones. M (5-8), L (8-11), XL (11-13).

6823 $1139

N-FERNO WIND-PROOF HINGED BALACLAVAStretchable fleece with wind-resistant fabric cover-ing the nose and neck for the ultimate in winter pro-tection and comfort, unique hinged design, 3-panel construction with flat lock stitching for a comfort-able “just made for you” fit, reflective accents help keep workers safe and seen, long length.

6970 $3635

N-FERNO EXTREME BALACLAVA WITH HOT ROX2-piece, 320g fleece design envelopes the face, neck and head, built-in heat exchanger provides warm air for inhalation in extreme conditions, form-fitting design prevents eyewear from fogging, adjustable mask with hook and loop attachments, removable face mask.

6825 $3679

N-FERNO NOMEX BALACLAVAStretchable Nomex fleece keeps head and neck comfortable while providing FR protection with an ATPV value of 9.7 (HRC 2), long length.

PERFORMANCE \\ APPAREL

6418 $3159

CORE PERFORMANCE WORK WEAR SHORT SLEEVEMid layer, relaxed fit, loose fit and light weight for max comfort in warm temps, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, and navy, sizes M-3XL.

6410 $2889

CORE PERFORMANCE WORK WEAR SHORT SLEEVEBase layer, all season, ripped fit, comfort and performance, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, and navy, sizes M-3XL.

6420 $2855

CORE PERFORMANCE WORK WEAR SHORT SLEEVEMid layer, all season, relaxed fit, soft “cottony” feel, advanced perfor-mance, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, navy, and hi-vis lime, sizes M-3XL.


6425 $3219

CORE PERFORMANCE WORK WEAR LONG SLEEVEMid layer, all season, relaxed fit, soft “cottony” feel, advanced performance, wicking fabrics and vent-ing for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treat-ments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, lime and navy, sizes M-3XL.

6445 $4485

CORE PERFORMANCE WORK WEAR FLEECEMid layer, soft fleece zip-up for warm comfort in cool conditions, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black and gray, sizes M-3XL.

6415 $3225

CORE PERFORMANCE WORK WEAR LONG SLEEVEBase layer, all season, ripped fit, comfort and performance, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, and navy, sizes M-3XL.

6435 $4129

CORE PERFORMANCE WORK WEAR LONG SLEEVEBase layer, thermal, ripped fit, medium weight stretch fabric for warm comfort, wicking fabrics and venting for multi-climate comfort, anti-stink treatments help workers remain unscented, soil release treatments make cleaning easy, long tail design, 50+ UPF for protection against harmful UV. Available in black, gray, and navy, sizes M-3XL.

TRAFFIC SAFETY // SHELTER & APPAREL

6000 $24695

ERGODYNE SHAX 6000 HEAVY-DUTY COMMERCIAL POP-UP TENT10’x10’ foot-print, peak height of 11‘, rugged 300D polyester shell with PU coating, double vented top for maximum air flow, weighs less than 50 pounds, convenient wheel bag for easy storage and transport, ABS plastic sliders for convenient height adjustment, heavy-duty ground stakes and ropes included, optional detachable side walls, meets CPAI-84 fire code.

6098 Side panel - $32.456094 Tent weight bags - $26.99

LUX-TJBJ2 $6175

OCCUNOMIXPREMIUM TWO-TONE BOMBERClass 3, 100% ANSI polyester with PU coating, removable 100% black polyester fleece liner, removable outer jacket sleeves, roll up and removable hood, can be worn 4 ways, weather resistant construction, zipper and snap closure, 3M Scotchlite reflective stripes backed by orange fabric. Avail-able in sizes S - 6X.


TAL $1499

OK-1 CLASS III SHORT SLEEVEANSI/ISEA 107 compliant, class II, level II performance, 100% polyester, 2” beaded tape, chest pocket. Available in sizes M-5XL, orange or lime.

911D $995

MEMPHIS GLOVESLUMINATOR HI-VIZDouble leather palm pattern in black split cow, wing thumb with adjustable wrist closures, high visibility material with 3M reflective striping, 3M reflective tape on three finger tips, ter-rycloth fabric on back of thumb. Available in sizes S-L.

8935 $1199

ERGODYNE GLOWEAR HI-VIS RANGER HATANSI compliant 150D oxford polyester, mesh venting panels,1” level 2 ANSI compliant reflec-tive material with contrasting color. Available in sizes S/M and L/XL, orange or lime.

5050409 $999

OK-1 CLASS II TWO TONE VESTANSI/ISEA 107 compliant, class II, level II performance, 100% polyester, rugged zipper closure, convenient outside pocket. Available in sizes L/XL and 2X/3X.

TL3-04 $1999

OK-1 CLASS III LONG SLEEVEANSI/ISEA 107 compliant, class III, level II performance, 100% polyester, 2” beaded tape, chest pocket. Available in sizes L - 5XL, orange or lime.

SIGNS & MARKERS \\ TRAFFIC SAFETY

03-901 $6295

CORTINA WARNING DIAMOND MESH FENCING4’x100’, orange poly-ethylene, highly visible, UV stabilized, rugged and reusable, 23 lbs per role, made in the USA.

Qty 10+ - $57.60

3007772 $4749

JACKSON SAFETY STOP/SLOW PADDLEPlastic sign assembly kit (staff and couplings), stop/slow paddle and ABS plastic handles, meets MUTCD requirements, octagon shape, 2/16” - 3/16” thick, 8” letts on 24” paddle size, 21” PVC handle, non-reflective.

3007773 Reflective - $67.493007355 15” paddle with 6” handle - $19.99

03-734RBC $3399

CORTINA 42”DELINEATOR POST10 lb rubber base, (2) 3” reflective collars.

1191 $1799

AERVOE 28” COLLAPSIBLETRAFFIC SAFETY CONE2.5 lb. weighted base, 2 reflective stripes, blinking red LED beacon, includes storage case.

03-500-07 $1199

CORTINA 28” TRAFFIC SAFETY CONEAll vinyl construction, ultraviolet stabilized color, high density base, MUTCD compliant.

97-01002-01 $7995

CORTINA PLASTX TYPE II BARRICADE8T/4B H.I. sheeting, recessed light bracket (light not included).

03-10-3WAYDC Barricade Light - $24.99

03-402 $775

CORTINA VINYL PENNANTS60 pennants, 12” height, 9” width, 100’ overall length, orange.

03-401 Orange/white - $7.75


8518382 $2,12939

ADVANCED ONE-PIECE ADJUSTABLE DAVIT MASTEliminates the need for custom length masts and extensions. Can be equipped with back mounted winches or SRL’s with retrieval capabilities. Lower mast extensions allow the user to increase the overall anchorage height of the system. Several portable and fixed base options are available for complete versatility. 5000 lb anchor point for fall arrest anchor-age. One piece adjustable offset mast 12”-29”, anchor point height 66”-76”.

3400853 $2,56259

SEALED-BLOK 3-WAY SELF RETRACTING LIFELINERaise and lower personnel or materials, simple change in/out of retrieval, stow away handle, optional bracket for davit attachment, available with RSQ option, for rescue use only, 30’ length.

3400923 50’ - $3,007.553400311 85’ - $3,886.593400509 130’ - $4,864.39

8102001 $1,51879

SALALIFT II WINCHManually operated, simply rotate the handle to raise or lower personnel or materials. Gear ratio is 6:1 with an average lifting speed of 12.75 ft/min (no power source is required). 60 ft. of 1/4” galvanized steel cable complete with carrying bag (60, 90 and 120 ft. lengths available in galvanized or stainless steel). Lightweight design, quick-mount system, free-wheel mode, overload clutch, housing cover, corrosion resistant, level wind, safety hook, reserve lifeline system.


CONFINED SPACE

05611 $1,69979

ELK RIVER ECONOMY EZE-MAN CONFINED SPACE SYSTEMIncludes Deluxe EZE-Man™ winch 3:1 ratio, tripod pulley, tripod head assembly, tripod leg assembly ,one auto-lock cara-biner ,yoke ,tote bag, tripod bag, winch bag, harness bag, five d-ring universal harness, rope grab with lanyard, nylon rope lifeline. 25’ length.

05612 50’ - $1,799.7505613 75’ - $1,879.7505614 100’ - $1,899.75

8510140$1,05195

VEHICLE HITCH MOUNT SLEEVEDesigned to install into a 2” hitch receiver on an attendant vehicle to provide a portable anchor point for confined space entry/retrieval, rescue and fall-arrest systems. Vari-ous sockets, extensions and accessories available.

SG51156$24799

PMI CONFINED SPACE HARNESSDesigned to meet the needs of confined space work-ers. Dorsal, sternal, waist, and shoulder attachment points, adjustable dorsal and shoulder rings, adjusts to fit 31”- 52” waists, break-apart buckles on legs and right shoulder, ergonomic shoulder straps, quick adjusting low profile buckles on waist, stor-age bag included. Universally sized, ANSI compliant.

ERICO is the pioneer of the CADWELD Exothermic Welding Process for permanent Cathodic Protection connections. Specifying the CADWELD process in your construction plans will dramatically extend the lifespan of infrastructure systems. CADWELD connections are made with a semi-permanent graphite mold, which holds the conductors to be welded. Weld metal (a mixture of copper oxide and aluminum) is dumped into the top of the mold. The mold is covered and the weld metal ignited. The exothermic reaction produces molten copper, which results in a permanent, high conductivity connection. A CADWELD Connection has current carrying capacity equal to that of the conductor, is permanent with a low resistance connection that cannot loosen or corrode, uses lightweight, inexpensive equipment, requires no external source of power or heat, and can be easily checked for quality.

WELD METALCadweld weld metal is a mixture of copper oxide and alumi-num, packaged by size in plastic tubes. Each tube contains the starting powder at the bottom of the plastic tube, with the weld metal on top. These containers are packaged, with metal disks, in polyethylene boxes. The welding metal cannot ignite spontaneously. They can be handled and stored without dan-ger and can be shipped with no special packaging or marking.


GROUNDING

PART # WIRE SIZE ROD WELD METAL PRICE

GRC-161T 2 Solid 5/8” #65 $103.00

PART # WIRE SIZE ROD WELD METAL PRICE

GTC-161T 2 Solid 5/8” #90 $103.00

GTC-181T 2 Solid 3/4” #90 $103.00

GTC-162G 2/0 5/8” #115 $103.00

GTC162Q 4/0 5/8” #115 $103.00

PART # WIRE SIZE WELD METAL PRICE

VBC-1T 2 Solid #65 $103.00

PART # WIRE SIZE PIPE SIZE WELD METAL PRICE

VSC-1V-V3C 2 Strand 1-1/4”-4” #45 $103.00

VSC-1T-V3C 2 Solid 1-1/4”-4” #45 $103.00

VSC-1T-V5C 2 Solid 4”-6” #45 $103.00

VSC-2G-V3C 2/0 2”-4” #90 $103.00

VSC-2Q-V3C 4/0 2”-4” #115 $103.00

PART # WIRE SIZE PIPE SIZE WELD METAL PRICE

VFC-1V-V3C 2 Strand 1-1/2”-4” #65 $103.00

VFC-1T-V3C 2 Solid 1-1/2”-4” #65 $103.00

VFC-1T002-V3C 2 Solid 1-1/2”-4” #65 $103.00


PTC-1T1V 2 Solid to 2 Strand #65 $103.00

PTC-1T1T 2 Solid to 2 Strand #65 $103.00

PTC-2G1T 2/0 to 2 Solid #90 $103.00

PTC-2G2G 2/0 to 2/0 #115 $103.00

PTC-2Q1T 4/0 to 2 Solid #150 $103.00

PTC-2Q2Q 4/0 to 4/0 #200 $103.00

PART # WELD METAL CASE QTY PRICE

#32-CASE #32 20 $42.50

#45-CASE #45 20 $59.85

#65-CASE #65 20 $73.95

#90-CASE #90 10 $51.85

#115-CASE #115 10 $64.50

#150-CASE #150 10 $80.75

#200-CASE #200 10 $99.55


VSC-1T 2 Solid #65 $103.00


LJC-EG1V 2 Strand #65 $103.00

LJC-EG1T 2 Solid #65 $103.00

LJC-EG2G 2/0 #90 $103.00

LJC-EG2Q 4/0 #65 $103.00


SSC-1T 2 Solid #32 $103.00

SSC-2G 2/0 #65 $103.00


HSC-2G 2/0 #90 $103.00


VFC-1T 2 Solid #45 $103.00

PART # RUN WIRE TAP WIRE WELD METAL PRICE

TAC-1T1T 2 Solid 2 Solid #45 $103.00

TAC-2G2G 2/0 2/0 #90 $103.00

CABLE TO TOP OF GROUND ROD

HORIZONTAL END TO END

VERTICAL CABLE DROP TO VERTICAL STEEL SURFACE

BOTTOM FEED CABLE TO VERTICAL PIPE DOWN

THROUGH CABLE TO TOP OF GROUND ROD

CABLE TO CABLE PARALLEL SPLICE

ANGULAR CABLE DROP TO VERTICAL STEEL SURFACE

TOP FEED CABLE TO VERTICAL PIPE UP

HORIZONTAL CABLE TO HORIZONTAL BUS BAR WELD

CABLE TO STEEL SURFACE HORIZONTAL

OVERHEAD VERTICAL TAP TO VERTICAL STEEL SURFACE

RUN AND TAP OR 3-WAY

L160 $5195

HANDLE CLAMPUsed for most molds, includes flint igniter. Offset handle reduces labor time and can fit in a smaller hole.

38-3922-00 $779

MOLD CLEANING BRUSHUseful in removing slag from molds, especially vertically split.

B160V $10275

CHAINHANDLE CLAMPSecure molds to vertical pipe, 20” chain for pipes up to 4”, includes flint igniter, can be used with or without chain.

B-106-27 20” extension chain - $16.35

T320 $595

FLINT IGNITERAvailable separately, but included with each handle clamp.

T320A Replacement flints (10pk) - $5.95

38-0202-00 $699

ADAPTER SLEEVESChanges 2 stranded molds to 6 stranded, 25pk

03-0329-00 Wrap sleeves (50pk) - $17.95

6116540 $32999

LAD-SAF FLEXIBLE CABLE SLEEVEFor use with 8mm or 3/8” diameter 1x7 or 7x19 solid core cable. Comes with 2000112 carabiner. Meets OSHA and ANSI standards.

6116541 Without carabiner - $309.996116507 With carabiner & shock absorber - $409.49

LADDER SAFETY

6116280 $15379

STANDARD TOP BRACKETGalvanized top bracket with mounting hardware. For systems up to 499 ft. (152m) high, fits up to 1-1/8” (2.85cm) rung diameter, attaches to 3 rungs, built-in energy absorber.

6116410 For systems over 500’ (152.4m) - $165.65

6116261 $13375

TOP BRACKETWeld-on top bracket with built-in energy absorber and fasteners.

6100710 Stand-off stainless steel for use with top bracket or bottom bracket - $8.99

6100400 $3145

CABLE GUIDENon-metallic cable guide with mounting hardware. For systems up to 199 ft, fits up to 1-1/8” rung diameter. Must have one every 25 ft.

6100515 For systems over 200’ (61m) - $31.45

6100035 $5869

BOTTOM BRACKETGalvanized bottom bracket with built-in tensioner.

RG-5000 $17999

GME SUPPLY CABLE GRAB For use with 3/8” cable, comes with carabiner and GME Supply carrying pouch, works on both galvanized and stainless steel cables. Meets ANSI, OSHA and CSA requirements for vertical lifelines.

VGCS $33999

MILLER VI-GO AUTOMATIC PASS-THROUGH CABLE GUIDEFor use with 5/16” or 3/8” diameter cable, automati-cally bypasses intermediate cable guides keeping both hands free for climbing, travels smoothly along cable and locks instantly in the event of a fall.

6100430 $3275

CABLE GUIDENon-metallic cable guide. Must have one every 25 ft.

6100136 Cable guide support - $7.29

6110000 $124/ftCABLE LIFELINEGalvanized cable, 3/8” (9.5mm) diameter, 1x7 type. Last 3 digits in part number indicate length.

DBI LAD-SAF Fixed Ladder Safety System >> DBI LAD-SAF Steel Pole (Weld-On) Ladder Safety System >>

6100090 $6325

STANDARD BOTTOM BRACKETFits up to 1-1/8” rung diameter, attaches to two rungs, tensioning device, galvanized.



ELECTRONICS

KB-20 $8395

SUUNTOVISTA COMPASSFeatures black azimuth scale division, reverse scale for taking cross bearings, optically magni-fied graduated scale and an index line. Graduated 0–360° at 1° intervals, compass readings to 1⁄2° accuracy. Housed in a lightweight, weath-erproof ABS plastic that floats, includes lanyard, measures 2”W x 3”L x 5⁄8”D.

MM200 $3639

KLEIN TOOLSAUTO RANGING MULTIMETERAuto ranging voltage, backlit display, measures AC/DC Voltage - 600V, measures AC/DC current - 10A, measures capaci-tance, temperature and frequency.

VX231 $20369

VERTEXSTANDARD PORTABLE RADIOAvailable in UHF of VHF, 16 channel capacity, 1-5 watts radio, large capacity battery, built-in emergency feature, talk around scan, lone worker functions. Includes radio, 7.2 V 1150 mAh Li-Ion battery, 120 VAC rapid charger, and antenna.

VX231UVX - $203.69VX231VHF - $203.69

10094910 $2,05479

MSA ALTAIR 5 MULTI-GAS DETECTOR 6 gas capability, MSA Link Software with multi-language capability, MotionAlert and Instant-Alert, triple alarms, high-resolution, crisp color display, Lithium-ion rechargeable battery, ergonomically designed rubber over-molded housing, passes 6’ drop test; IP65-rated for water and dust ingress

10092521 $24999

MSA ALTAIRSINGLE GASDETECTORSingle-gas detection for carbon monoxide, hydrogen sulfide or oxygen. Rubberized housing offers superior dust/water protection and high resistance to RFI. One-button operation provides durability and ease of use. Features triple alarm system with (2) bright LEDs, audible and vibrating alarm.

10092521 HS2 - $203.6910092522 C02 - $203.6910092522 02 - $203.69

FS8500 $49999

FIELDSENSE OCCUPATIONALRF SAFETY MONITORCompact, durable design intended for everyday use, a single button toggles between user modes and power-on/off, display and process-ing of measured data is limited to that which is required to make informed on-site decisions and take the necessary precautions, rub-bery outer sleeve offers improved grip and protects against mechani-cal shock and impact, indicates RF field strength using bright LED’s, loud alarm will warn in case of EMF overexposure danger, calibrated to ICNIRP occupational reference levels, can be mounted on a tripod.

FS8000 Calibrated to ICNIRP general public reference levels (yellow) - $499.99


TRAINING COURSES

VR63003 $5,40000

COMPETENT TOWER CLIMBER/RESCUERGoal: to arm those who work at height with the tools, knowledge and expertise to climb safely, and to effect self or companion rescue quickly and efficiently. The field portion of this course will teach self-rescue, com-panion rescue by raise, companion rescue by controlled descent and companion rescue. Meets the criteria established by NATE Tower Climber Fall Protection Training Standard (2008). Max students: 6, Duration: four 8-hour days, Includes: transportation & expenses for 1 instructor to location within the continental US.

VR63007 $2,70000

PERSONAL ESCAPE AND EMERGENCY ESCAPE OPTIONSGoal: to “test drive” several different types of personal escape solutions, and to experience for yourself some of the differences and advantages of different models. In addition to hands-on practice, participants will learn about regulations and standards affecting their industry, anchor selection, and equipment selection, inspection, care and maintenance. Max students: 6, Duration: one 8-hour day, Includes: transportation & expenses for 1 Instructor to location within the continental US.

VR63005 $6,75000

RESCUE FROM FALL PROTECTION, DIFFICULT ACCESSGoal: to instruct students who work in environments where rescue at height may require horizontal, as well as vertical, movement of an injured or suspended worker. The classroom session focuses on the importance of a rescue pre-plan, OSHA compliance, PPE use, fit and inspection and rescue theory. Familiarity, avoidance and treatment of the dangers associated with Suspension Intolerance are covered. Max students: 6, Duration: four 8-hour days, Includes: transportation & expenses for 1 Instructor to location within the continental US.

VR63009 $3,90000

PERSONAL ESCAPE FOR TOWER CRANE OPERATORGoal: to learn personal escape techniques that can be used from the cab, or any viable anchor point on the crane. Participants receive instruction on proper gear selection and compatibility, anchor selection, escape and controlled descent techniques, and will get plenty of hands-on practice using both types of personal escape gear during the course, can be customized to include different escape options. Max students: 4, Duration: two 8-hour days, Includes: transportation & expenses for 1 Instructor to location within the continental US.

VR63023 $9,07500

ROPE ACCESS CERTIFICATION COURSE (SPRAT®)Goal: improve your safety at height and your skill set including ascending and descending, rope to rope trans-fers, passing knots, short and long re-belays, passing deviation anchors, passing and installing rope protection, basic knot craft, the importance of fall factors and mechanical advantage systems Max students: 6, Duration: four 8-hour days, Includes: transportation & expenses for 1 Instructor to location within the continental US.

Individual Course in Denver, CO - $1,675.00 per student

VR63001 $5,40000

INDUSTRIAL RESCUE AFTER A FALLGoal: to effect companion rescue by controlled descent and by lower, as well as how to secure and raise the subject using minimal personnel and without having to learn to tie knots or construct complicated mechanical advantage systems. The classroom portion focuses on the importance of establishing a rescue pre-plan, OSHA compliance, PPE use, fit and inspection, and rescue theory. Max students: 6, Duration: three 8-hour days, Includes: transportation & expenses for 1 instructor to location within the continental US.


SIZING CHARTS

NOTE: Delta II harnesses are also available in Universal Size (one size fits most - approxi-mately medium size). ExoFit harnesses are available in sizes XS-XXL.

SIZE HEIGHT (FT/IN) WEIGHT (LBS)

XS 4’10” - 5’8” 90 lbs - 130 lbs

SM 4’10” - 6’ 110 lbs - 170 lbs

MD 5’ - 6’2” 140 lbs - 240 lbs

LG 5’2” - 6’4” 170 lbs - 300 lbs

XL 5’4” - 6’6” 200 lbs - 340 lbs

2XL 5’6” - 6’8” 230 lbs - 390 lbs

3XL 5’8” - 6’8” 230 lbs - 420 lbs


SM 4’10” - 6’ 100 lbs - 170 lbs

MD / LG 5’ - 6’3” 140 lbs - 250 lbs

XL 5’2” - 6’6” 180 lbs - 310 lbs


SM 5’ - 5’11” 110 lbs - 150 lbs

Standard 5’ - 6’6” 110 lbs - 240 lbs

XL 5’ - 6’6” 220 lbs - 320 lbs

2XL 5’ - 6’6” 280 lbs - 360 lbs

SIZE WAIST (INCHES/CENTIMETERS)

3XS 20” - 28” / 50 cm - 70 cm

2XS 24” - 32” / 60 cm - 80 cm

XS 28” - 36” / 70 cm - 90 cm

SM 32” - 40” / 80 cm - 100 cm

MD 36” - 44” / 90 cm - 110 cm

LG 40” - 48” / 100 cm - 120 cm

XL 44” - 52” / 110 cm - 130 cm

2XL 48” - 56” / 120 cm - 140 cm

3XL 52” - 60” / 130 cm - 150 cm

SIZE WAIST (INCHES) HEIGHT (FT/IN) WEIGHT (LBS)

SM 29” - 33” 4’8” - 5’8” 100 lbs - 135 lbs

MD 36”- 45” 5’5” - 6’0” 110 lbs - 145 lbs

LG 40” - 49” 5’10” - 6’5” 150 lbs - 225 lbs

XL 44” - 53” 6’0” - 6’8” 200 lbs - 310 lbs

SIZE WAIST (INCHES) LEG LOOP (INCHES) HEIGHT (FT/IN)

SZ 1 27.5” - 47” 19.5” - 25.5” 5’2” - 5’8”

SZ 2 31.5”- 55” 23.5” - 29.5” 5’8” - 6’6”

SIZE WAIST (INCHES) LEG LOOP (INCHES)

Standard 30” - 55” 19” - 34”

LG-XL 35”- 61” 24” - 40”

*All weights and measurements are approximate.

NOTE: Measurements are over clothing and waist sizes are at the navel.

NOTE: These sizes only apply to the PMI Avatar.

NOTE: These sizes only apply to the Yates Voyager and RTR Tower Access..

NOTE: Bring tape measure around the widest part of your chest, under your arms, and around torso.


MD 4’9” - 5’9” 90 lbs - 190 lbs

Universal 4’9” - 6’6” 90 lbs - 340 lbs

2XL-3XL 4’9” - 6’6” 260 lbs - 400 lbs

SIZE HEIGHT (FT/IN) WAIST (INCHES)

SM 5’ - 5’9” 28” - 33”

MD 5’5” - 6’4” 32” - 36”

LG 5’5” - 6’4” 35” - 39”

XL 5’5” - 7’ 39” - 50”

SIZE CHEST SIZE (Shirts) CHEST SIZE (Outerwear)

SM ----- 34–36” (86-91 cm)

MD 38–41” (97-104 cm) 36–38” (91-97 cm)

LG 41–44” (104-112 cm) 38–42” (97-107 cm)

XL 44–47” (112-119 cm) 42–46” (107-117 cm)

2XL 47–50” (119-127 cm) 46–50” (117-127 cm)

3XL 50–53” (127-135 cm) 50–54” (127-137 cm)

Supply Co

GME Supply Co1805 Burlington StreetColumbia, MO 65202

www.gmesupply.comPhone: (800) 940-6762 | Fax: (888) 511-0457Distribution Warehouses:Alabama, California, Iowa, Minnesota, Missouri, Nevada, New York, Utah

Corporate Office:1805 Burlington St, Columbia, MO 65202 Supply Co $1.99

Documents

g Me Supply Fall Catalog 2012