Upload
jceksa
View
255
Download
9
Embed Size (px)
DESCRIPTION
Locks Mortise locks for entrance and internal doors Products of the G.U.group for doors Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str.3 71254 Ditzingen Telephone:+49 - (0)7156 301 - 0 Fax: +49 - (0)7156 301 - 293 www.g-u.de [email protected] Edition:March 2004
Citation preview
Mortise locks for entrance and internal doors
Locks
Edition: March 2004
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 371254 DitzingenTelephone: +49 - (0)7156 301 - 0Fax: +49 - (0)7156 301 - [email protected]
BKS GmbHHeidestr. 7142549 VelbertTelephone: +49 - (0)2051 201 - 0Fax: +49 - (0)2051 201 - 431www.bks.de
Products of the G.U. group for doors
Mortise safety locks
Content
Mortise locks according to DIN 18251 – T1
Content
Mortise locks for fire rated doors
Special locks
4 5
Page 10 Page 14Page 12Page 12
2154 211421742124
0024 604362066031
0215 061505150415
1125 233823271206
1795 630661386065
Page 16 Page 22Page 20Page 18
Page 44 Page 50Page 48Page 46
Page 26 Page 32Page 30Page 28
Page 34 Page 40Page 38Page 36
0010 105800550216
0353 03720371G353
Page 54 Page 60Page 58Page 56
Page 62 Page 64Page 64Page 62
Page 66 Page 70Page 68Page 68
0375 03930381HF0381H
Page 75 Page 83Page 76Page 76Page 75
Page 77
Page 83
Page 78Page 78Page 77
Page 79
Page 84
Page 80Page 80Page 79
Page 81
Page 84
Page 82Page 82Page 81
S413
S411
S448S441S440
S403
S407
S411S407S404
B 9000
S404
B 9000B 9000B 9000
B 9000 S403B 9000B 9000B 9000
Striking plates
Content
Striking plates
Content
Page 85 Page 86Page 86Page 85
Page 87 Page 87
S448 2828
S412 S441S440S413
6 7
Product features
LatchboltAssures the best security as additionallocking.The integrated lever allows the latchbolt toadvance automatically from 12 to 20 mm.
ForendAs fixing element of the lock with the door.The various design scopes of surfaces andshapes must be specified in the order.
Automatic deadboltProjects automatically by 20 mmand provides an improved lockingand security in conjunction withthe latchbolt.
Locking methodMay be supplied for profilecylinders or Swiss roundcylinders.
Fixing holes for doorfurnitureWith swarf protection buhes, providesfor a solid through fixing of the doorfurniture.
Clamping followerReceives the spindle of thedoor furniture without any playand serves for a reliable lockoperation.
Lock caseFully enclosed it protects the functionof the lock.
BacksetMust be specified inorders.
8
Product features
9
Mortise safety locksAutomatically locking locks – Series 21
Automatic locking locks – Series 21
Application: Entrance house and apartment doors
Technical features:– profile cylinder lock with latch lever function, optionally also for Swiss round cylinders– Automatic locking of latbhbolts and automatic deadbolts by an integrated level, therefore does not require an auxiliary
latch– no longer requires manual locking of the door– certified security according to VDS class B – can be supplied in backsets 55, 60, 65, 70, 80 and 100 mm– Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – may be switched in the BUTLER function with free running handle on the inside door, resulting in increased security
against burglaries– various forend versions in regards to form and optics
Lock 0024 + 6031Application: Entrance house and apartment doors
Technical features:– Profile cylinder lock with latch lever function– optionally also as round cylinder lock or short cylinder lock– can be supplied in backsets 55, 60, 65, 70 and 80 mm– as 0024 for a profile center distance of 92 mm– as 6031 for a profile center distance of 72 mm– Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case– various forend versions in regards to form and optics– Malleable cast iron latch, deadbolt made of steel – 2-turn 20 mm deadbolt throw
Lock 6206Application: Entrance house and apartment doors with increased security according to WK2
Technical features:– Profile cylinder lock with latch lever function– can be supplied in backsets 55, 65, and 80 mm– with a 6 mm forend for special burglary prevention– for a profile center distance of 72 mm– Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case– various forend versions in regards to form and optics– Malleable cast iron latch, deadbolt made of steel – 2-turn 20 mm deadbolt throw with a triple safety tumbler
Lock 6043Application: Radiation protection doors with mechanical safety requirements
Technical features:– Cylinder lock with latch lever function– provided for use as profile half cylinders– massive follower of malleable cast iron– can be supplied in backsets 40 / 80 mm– Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case– various forend designs of stainless steel– Malleable cast iron latch, deadbolt made of steel – 1-turn 15 mm deadbolt throw
Range / Order numbers
Door open Door closed
BUTLER function
Lock for profile cylinder
Other options (upon request)
Specification text
BKS Latchbolt lock 2154 with an automatic locking for apartment entrance doors; measurements according to DIN 18 251; certified according to VDSclass B; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; with assembly friendly guide of the cylinder fixing screw;screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around the follower and cylinder holes; with protecting steelbushed; 10 mm steel follower with bronze bearing ring; latchbolt with additional blocking in two positions; automatic deadbolt; latchbolt and automaticdeadbolt 20 mm projection; automatic locking triggered through in latchbolt integrated lever (no auxiliary latch necessary); behind backset 28 mm; centerdistance 92 mm, backset __________ mm
Lock 2154 – BUTLER
ForendSurface
Backset inmm
Forend formatForend, 20 mm for rebated doors
DIN LH DIN RH DIN LH DIN RHForend, 24 mm for flush doors
Stainless steel
squareRoundedsquare
Roundedsquare
Roundedsquare
Rounded
B 2154 0009B 2154 0001B 2154 0025B 2154 0017B 2154 0041B 2154 0033B 2154 0073B 2154 0065
B 2154 0010B 2154 0002B 2154 0026B 2154 0018B 2154 0042B 2154 0034B 2154 0074B 2154 0066
B 2154 0013B 2154 0005B 2154 0029B 2154 0021B 2154 0045B 2154 0037B 2154 0077B 2154 0069
B 2154 0014B 2154 0006B 2154 0030B 2154 0022B 2154 0046B 2154 0038B 2154 0078B 2154 0070
55
60
65
80
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
70100
Follower
Swiss round cylinder fixing holeB 9000 0195B 9000 0203B 9000 0205
B 9000 0196B 9000 0204B 9000 0206
22 mm for rebateddoor locks, 28 mm
for flush doors
11
Lock 2154 – BUTLER
10
Door closed– Cylinder locked– Door handle in free running position
Range / Order numbers
Lock 2124 for profile cylinder
Other options (upon request)
Specification text
Deadbolt latch lock 2124 – ButlerBKS Latbbolt lock 2124 with an automatic locking for apartment entrance doors; measurements according to DIN 18 251; certified according to VDS classB; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; with assembly friendly guide of the cylinder fixing screws; screwholes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around the follower and cylinder holes; with steel protection bushes; 8mmsteel follower with bronze bearing ring; latchbolt with additional blocking in two positions; self-locking automatic latchbolt; latchbolt 20 mm projectingin locking position; automatic locking triggered through integrated lever in latchbolt (no auxiliary latch necessary); behind backset 28 mm; center distance72 mm; backset __________mm
Deadbolt latch lock 2174 with manually lockable latchBKS Latchbolt lock 2174 with an automatic locking of the latchbolt and manually lockable deadbolt for apartment entrance doors; measurementsaccording to DIN 18 251; certified according to VDS class B; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; withassembly friendly guide of the cylinder fixing sxrew; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around thefollower and cylinder holes; with swarf protecting steel bushes; 8 mm steel follower with bronze bearing ring; latchbolt with additional blocking in twopositions; manually lockable deadbolt; 20 mm projection latchbolt and deadbolt, automatic locking triggered through integrated lever in latchbolt (noauxiliary latch necessary); behind backset 28 mm; center distance 72 mm, backset __________mm
Lock 2124 – BUTLER + 2174
Forend surfaceBackset in
mmForend format
Forend, 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN R
Forend, 20 mm for rebated doorsDIN LH DIN RH
Forend, 24 mm for flush doors
stainlesssteel
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
B 2124 0007B 2124 0001B 2124 0019B 2124 0013B 2124 0031B 2124 0025B 2124 0055B 2124 0049B 2124 0067B 2124 0061
B 2124 0008B 2124 0002B 2124 0020B 2124 0014B 2124 0032B 2124 0026B 2124 0056B 2124 0050B 2124 0068B 2124 0062
B 2124 0009B 2124 0003B 2124 0021B 2124 0015B 2124 0033B 2124 0027B 2124 0057B 2124 0051B 2124 0069B 2124 0063
B 2124 0010B 2124 0004B 2124 0022B 2124 0016B 2124 0034B 2124 0028B 2124 0058B 2124 0052B 2124 0070B 2124 0064
B 2124 0011B 2124 0005B 2124 0023B 2124 0017B 2124 0035B 2124 0029B 2124 0059B 2124 0053B 2124 0071B 2124 0065
B 2124 0012B 2124 0006B 2124 0024B 2124 0018B 2124 0036B 2124 0030B 2124 0060B 2124 0054B 2124 0072B 2124 0066
55
60
65
80
100
Lock 2174 for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend, 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend, 20 mm for rebated doorsDIN LH DIN RH
Forend, 24 mm for flush doors
stainlesssteel
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
B 2174 0007B 2174 0001B 2174 0019B 2174 0013B 2174 0031B 2174 0025B 2174 0055B 2174 0049B 2174 0067B 2174 0061
B 2174 0008B 2174 0002B 2174 0020B 2174 0014B 2174 0032B 2174 0026B 2174 0056B 2174 0050B 2174 0068B 2174 0062
B 2174 0009B 2174 0003B 2174 0021B 2174 0015B 2174 0033B 2174 0027B 2174 0057B 2174 0051B 2174 0069B 2174 0063
B 2174 0010B 2174 0004B 2174 0022B 2174 0016B 2174 0034B 2174 0028B 2174 0058B 2174 0052B 2174 0070B 2174 0064
B 2174 0011B 2174 0005B 2174 0023B 2174 0017B 2174 0035B 2174 0029B 2174 0059B 2174 0053B 2174 0071B 2174 0065
B 2174 0012B 2174 0006B 2174 0024B 2174 0018B 2174 0036B 2174 0030B 2174 0060B 2174 0054B 2174 0072B 2174 0066
55
60
65
80
100
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
70
Follower
Swiss round cylinder fixing holeB 9000 0247B 9000 0433B 9000 0435
B 9000 0248B 9000 0434B 9000 0436
13
Lock 2124 – BUTLER + 2174
12
Door open Door closed
BUTLER functionDoor closed– Cylinder locked– Door handle in free frunning position
2124 2174Manually lockable deadbolt
Lock 2114
14
Range / Order numbers
Lock for profile cylinder
Other options (upon request)
Specification text
BKS Latchbolt lock 2114 with automatic locking of the latch without automatic deadbolt for apartment entrance doors; measurements according to DIN 18251; certified according to VDS class B; forend made of of stainless steel, rounded; with latch lever; closed, galvanized lock case; with eassembly friendlyguide of the cylinder fixing screw; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses) around the follower and cylinderholes; with swarf protecting steel bushes; 8 mm steel follower with bronze bearing ring; latchbolt with additional blocking in two positions; without auto-matic deadbolt; 20 mm protecting latchbolt; automatic locking triggered through in latchbolt integrated lever (no auxiliary latch necessary); behind backset28 mm; center distance 72 mm; backset __________mm
Lock 2114
ForendSurface
BacksetIn mm
ForendForm
Forend, 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend, 20 mm for rebated doorsDIN LH DIN RH
Forend, 24 mm for flush doors
stainlesssteel
Rounded
Rounded
Rounded
Rounded
B 2114 0001
B 2114 0013
B 2114 0025
B 2114 0049
B 2114 0002
B 2114 0014
B 2114 0026
B 2114 0050
B 2114 0003
B 2114 0015
B 2114 0027
B 2114 0051
B 2114 0004
B 2114 0016
B 2114 0028
B 2114 0052
B 2114 0005
B 2114 0017
B 2114 0029
B 2114 0053
B 2114 0006
B 2114 0018
B 2114 0030
B 2114 0054
55
60
65
80
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
70100
Follower
Swiss round cylinder fixing holeB 9000 0247B 9000 0433B 9000 0435
B 9000 0248B 9000 0434B 9000 0436
15
Door open Door closed
BUTLER functionDoor closed– Locking cylinder locked– Door handle in free running position
Safety lock 0024
16
Range / Order numbers
Lock for profile cylinder
Other options (upon request)
Specification text
BKS mortise lock 0024 for profile cylinders (or round cylinders / or short cylinders); for apartment entrance doors; nickel silver painted forend (or stainlesssteel forend), rounded (or square); with latch lever; enclosed, galvanized lock case; screw holes for door furniture with connecting screws up to M 8 arounddeadbolt and latch follower; 10 mm malleable cast iron follower; latch made of malleable cast iron, nickel plated; 2-turn steel deadbolt, nickel plated;center distance 92 mm; backset _____ mm
Safety lock 0024
Forend surfaceBackset in
mmForend format
Forend, 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend, 22 mm for rebated doorsDIN LH DIN RH
Forend, 24 mm for rebated doors
steelNickel-silver
square
square
square
square
00241001
00241003
00240606
00241007
00241002
00241004
00240594
00241008
00240616
00240618
00240603
00240622
00240617
00240619
00240604
00240623
--
--
00240628
--
--
-–
00240629
--
55
60
65
80
ForendSurface
BacksetIn mm
ForendForm
Forend, 24 mm for flush doorsDIN LH DIN RH DIN LH DIN RH
Forend, 28 mm for flush doors
Nickel-silver steel
square
square
square
square
00241011
00241013
00240021
00241017
00241012
00241014
00240022
00241018
00241021
00241023
00241031
00241017
00241022
00241024
00241032
00241018
55
60
65
80
Lock for round cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 24 x 310 mm for rebated doors
DIN LH DIN RH DIN LH DIN RHForend 28 x 310 mm for flush doors
steelNickel-silver
square 00240595 00240596 00240597 0024059865
Lock for short cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 24 x 310 mm for rebated doors
DIN LH DIN RH DIN LH DIN RHForend 28 x 310 mm for flush doors
steelNickel-silver
stainlesssteel
square 00240599 00240600 00240601 0024060265
BacksetIn mm
ForendFinish Width
Special versions Possible strikingplates
7090
Follower
Offset deadbolt (profilecylinder lock only)
Sawing pro-tection Latchfixing deviceFront bevel
Rounded forend
Anti-panic function D(only backset 65mm)
Anti-panic function E(only backset 65 mm)
S 401S 407S 404
24 mm for rebateddoor
24 mm for flush doorForend 22 x 310Forend 24 x 310Forend 28 x 310
17
Round cylinder Short cylinderProfile cylinder
Safety lock 6031
18
Range / Order numbers
Lock for profile cylinder
Other options (upon request)
Specification text
BKS mortise lock 6031 for profile cylinders (or round cylinders / or short cylinders)according to DIN 18 251 – class 3; for apartment entrance doors;nickel silver painted forend (or stainless steel forend), rounded (or square); with latch lever; enclosed, galvanized lock case; screw holes for doorfurniture with connecting screws up to M 8 around deadbolt and latch follower; 8 mm malleable cast iron follower ; latch made of malleable cast iron,nickel plated; 2-turn steel deadbolt, nickel plated; center distance 72 mm; backset _____ mm
Safety lock 6031
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for flush doorsDIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
6031001360310015
----------------
6031001460310016
----------------
60310063603100676031003560310021603100396031002360310053603100256031005760310061
60310064603100686031003660310022603100406031002460310054603100266031005860310062
60310065603100436031003760311001603100416031002760310055603110036031005960311005
60310066603100446031003860311002603100426031002860310056603110046031006060311006
55
60
65
70
80
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollower
9 mm10 mm Sawing protection
Front bevel No. 3+5Latch fixing device
S 204S 241
S 401S 404S 407S 411
19
Lock for round cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
square 60311007 60311008 60311009 6031101055
Lock for short cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
square
square
square
60311011
60311013
60311015
60311012
60311014
60311016
60311017
60311019
60311021
60311018
60311020
60311022
55
60
65
Round cylinder Short cylinderProfile cylinder
Safety lock 6206
20
Range / Order numbers
Other options (upon request)
Specification text
BKS mortise lock 6206 for apartment entrance doors according to WK2 (ET1); nickel silver painted 6 mm thick forend (or stainless steel forend),welded 5 times, rounded; with latch lever; enclosed, galvanized lock case; screwed together 4 times; screw holes for door furniture with connectingscrews up to M 8 around deadbolt and latch follower; 8 mm malleable cast iron follower; latch made of malleable cast iron, nickel plated; 2-turn steeldeadbolt with triple safety tumbler, nickel plated; center distance 72 mm; backset _____ mm
Safety lock 6206
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollower
S 204S 241
S 350 (20 x 20)S 500
Forend dimensions 20 x 235 mm
Forend dimensions 24 x 235 mm
21
Lock for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 20 x 280 mm for rebated doors
DIN LH DIN RH DIN LH DIN RHForend 24 x 280 mm for flush doors
steelNickel-silver
stainlesssteel
Rounded
Rounded
Rounded
Rounded
Rounded
Rounded
62061001
62061003
62061005
62060042
62060007
62061013
62061002
62061004
62061006
62060043
62060008
62061014
62061007
62061009
62061011
62061015
62061017
62061019
62061008
62061010
62061012
62061016
62061018
62061020
55
65
80
55
65
80
Mortise lock 6043
22
Range / Order numbers
Lock for double profile cylinder
Ohter options (upon request)
Specification text
BKS mortise lock 6043 for radiation protection doors; prepared for profile half cylinder with a 40 mm + 80 mm backset; stainless steel forend, rounded;with latch lever; enclosed galvanized lock case; screw holes for door furniture with connection holes up to M 8 around latch and deadbolt follower; 8 mmmalleable cast iron follower; latch made of malleable cast iron, nickel plated; steel deadbolt, one turn, nickel plated; center distance 72 mm; backset of 40+ 80 mm
Mortise lock 6043
ForendSurface
BacksetIn mm
ForendForm
VersionDIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
stainlesssteel
RoundedWith latch lever
Without latch lever
B 6043 0215
B 6043 0211
B 6043 0216
B 6043 0212
B 6043 0207
B 6043 0203
B 6043 0208
B 6043 020440/80
BacksetIn mm
ForendFinish Width
Special versions Possible striking platesFollower
S 204S 241
S 350 (20 x 20)S 500
23
24 25
Fixing hole for doorfurnitureProvides for a solid,Through fixing of thedoor furniture
Product features
LatchProvides a durableClosure of the door.
ForendAs fixing element of the lock withthe door. The various design scopesof surfaces and shapes must bespecified in the order.
Locking methodFor profile cylinders with latch leverfunction.Also for Swiss round cylinders in someversions
BacksetIn ordersMust be specified
Lock caseFully enclosed, it protectsAs stable galvanized designThe function of the lock
Product features
Mortise locks for fire rated doorsLock 1125
Mortise locks for fire rated doors
Application: Fire rated doors (H80) requiring reversible locks
Technical features:– profile cylinder lock with latch lever function, 72 mm distance– available in backset 65 mm– usable DIN LH + RH by turning the lock – galvanized lock case fully enclosed– steel latch– additional steel deadbolt, single turn with 14 mm deadbolt projection– galvanized steel forend, 24 mm forend width
Lock 1206 + 6306Application: Fire rated doors, also with burglary prevention requirements
Technical features:– profile cylinder lock with latch lever function, 72 mm distance– according to DIN 18250 – class 3 (for contract doors) + class 5
(safety lock)– can be supplied in backsets 55, 65, 80 and 100 mm– Possibility of through fixings of conventional door furniture– galvanized lock case fully enclosed– galvanized steel latch,– class 3 with zinc-die cast deadbolt– class 5 with galvanized steel safety deadbolt
– reversible latch, usable DIN LH + RH– 2-turn 20 mm deadbolt throw– Various forend versions relative to form and
finish– Finish– as safety lock 6306 with 6 mm forend– as triple latch lock 6065 with additional latch
Locks 6138
Lock 2327Application: Fire rated doors, which are combined with various locking suites
Technical features:– Profile cylinder lock for 2 profile cylinders, 72 mm distance– with latch lever function– according to DIN 18250 – class 3– available in backset 32/65 mm– galvanized lock case fully enclosed– Galvanized steel latch– galvanized steel deadbolt– one turn deadbolt throw– various forend versions in regards to form and optics
Lock 2338 with locking to the topApplication: Custom designed fire rated doors
Technical features:– profile cylinder lock with latch lever function, 72 mm distance– for fire rated doors according to DIN 4102 – can be supplied in backsets 65, 80 and 100 mm– Possibility of through fixing of conventional door furniture– galvanized lock case fully enclosed– galvanized steel latch,– galvanized steel deadbolt– one turn deadbolt throw– various front versions in regards to form and optics– in conjunction with BKS spring bolt lock 1795
DeadboltSecures the closed door against Unauthorized entries
Locking to the topAs option for special designs in Combination with the BKS spring bolt lock1795 possible
FollowerReceives the spindle of thedoor furniture and operatesthe lock.
26 27
Range / Order numbers
Single latch lock
Additional possibilities (upon request)
Specification text
BKS single latch lock 1125; usable DIN LH + RH, suitable for fire rated doors according to DIN EN 1634 + DIN 4102; galvanized forend, rounded; withlatch lever; enclosed galvanized lock case; 2-turn 9 mm steel follower; steel latch, galvanized; additional steel deadbolt, single turn, galvanized; centerdistance 72 mm; backset 65 mm
Single latch lock 1125 for fire rated doors
usable DIN LH + RH
BacksetIn mm
ForendFinish Width
Special versions Possible striking platesFollower
B 9000 0775
Single latch lock 1125 for fire rated doors
ForendSurface
BacksetIn mm
ForendForm
Forend 24 mm
steelgalvanized
Rounded 1125000165
28 29
Lock 1206 according to DIN 18250 for fire rated doors
Range / Order numbers
Specification text
DIN 18250 – class 3BKS fire rated door lock 1206 according to DIN 18250 – class 3 suitable for fire rated doors; galvanized steel forend (or stainless steel), rounded;galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 2-turn 9 mm steel follower; galvanized latch made of malleablecast iron; 2– turn zinc die-cast deadbolt; center distance 72 mm; with latch lever function; _____ mm backsetDIN 18250 – class 5BKS fire rated door lock 1206 according to DIN 18250 – class 5 suitable for fire rated doors; galvanized steel forend (or stainless steel), rounded;galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 2-part 9 mm self-clamping steel follower; galvanized latch madeof malleable cast iron; 2-turn zinc die-cast deadbolt; center distance 72 mm; with latch lever function; _____ mm backset
Lock 1206 according to DIN 18250 for fire rated doors
Other options (upon request)
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollower
Swiss round cylinder fixing holeDeadbolt and follower monitoringLatch and deadbolt with anti-friction coating
Gold-platedForend
Lock according to DIN 18250 – class 3 for profile cylinders
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doors Forend 24 mm for flush doorsDIN LH DIN RH DIN LH DIN RH
steelgalvanized
stainlesssteel
RoundedRoundedRoundedRoundedRoundedRoundedRoundedRounded
1206036312060365120603671206036912060379120603811206038312060385
1206036412060366120603681206037012060380120603821206038412060386
1206037112060373120603751206037712060387120603891206039112060393
1206037212060374120603761206037812060388120603901206039212060394
556580100556580100
Lock according to DIN 18250 – class 5 for profile cylinders
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doors Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
steelgalvanized
stainlesssteel
RoundedRoundedRoundedRoundedRoundedRoundedRoundedRounded
1206033612060324120603401206036012060344120603281206033212060354
1206033712060325120603411206036112060345120603291206033312060355
1206033812060326120603421206010012060346120603301206033412060358
1206033912060327120603431206012112060347120603311206033512060359
556580100556580100
Class 5Class 3
B 9000 0319B 9000 0435B 9000 0248
B 9000 0320B 9000 0436
30 31
Lock 2327 for fire rated doors
Range / Order numbers
Lock for double profile cylinder
Other options (upon request)
Specification text
BKS mortise lock 2327 according to DIN 18250-class 3 suitable for fire rated doors; provided for 2 differently locking profile cylinders of backset 32 / 65mm , stainless steel forend, rounded; galvanized enclosed lock case, with assembly friendly guide of the cylinder fixing screw; 9 mm malleable cast-ironfollower; one turn galvanized malleable cast-iron latch; center distance 72 mm; with latch lever function; backset 32 / 65 mm
Lock 2327 for fire rated doors
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
Roundedstainlesssteel B 2327 0003 B 2327 0004 B 2327 0007 B 2327 000632 / 65
BacksetIn mm
ForendFinish Width Special version
Possible striking platesFollower
Swiss round cylinder fixing holeLatch and follower monitoring
Latch and deadbolt with anti-friction coating
B 9000 0319B 9000 0435B 9000 0248
B 9000 0320B 9000 0436
Gold platedforend
32 33
Lock 2338 for profile cylinder
Range / Order numbers
Other options (upon request)
Specification text
BKS mortise lock 2338 for fire rated doors suitable according to DIN 4102; with additional locking to the top, provided for the combination with spring boltlock 1795, in combination with tube 9037 with locking spring; stainless steel forend, rounded; galvanized enclosed lock case, with assembly friendly guideof the cylinder fixing screw; 9 mm malleable cast-iron follower; galvanized malleable cast-iron latch; 2-turn galvanized steel deadbolt; center distance 72mm; _________ mm backset
Lock 2338 for profile cylinder
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollower
Swiss round cylinder fixing holeDeadbolt and follower monitoring
Latch and deadbolt with anti-friction coating,unsafety latch fixing device
B 9000 0319B 9000 0435B 9000 0248
B 9000 0320B 9000 0436Gold plated
forend
Lock for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
stainlesssteel
Rounded
Rounded
Rounded
B 2338 0007
B 2338 0009
B 2338 0011
B 2338 0008
B 2338 0010
B 2338 0012
B 2338 0001
B 2338 0003
B 2338 0005
B 2338 0002
B 2338 0004
B 2338 0006
65
80
100
34 35
Spring bolt lock 1795 for lock 2338 with locking to the top
Range / Order numbers
Specification text
Spring bolt lockBKS spring bolt lock 1795 for fire rated doors according to DIN 4102, provided for the use with BKS mortise lock 2338, with additional locking to the top;in combination with tube 9037 with locking spring; stainless steel forend, rounded; galvanized guiding tube
TubeTube 9037 with locking spring for fire rated doors suitable according to DIN 4102; provided for the use with BKS mortise lock 2338, with additional lockingto the top; in combination with BKS spring bolt lock 1795; galvanized tube; _____ mm door height
Spring bolt lock 1795 for lock 2338 with locking to the top
Spring bolt lock 1795
ForendSurface
BacksetIn mm
ForendForm
Forend 20 x 54 mm for rebated doorsusable DIN LH + RH usable DIN LH + RH
Forend 24 x 54 mm for flush doors
Stainless steel Rounded B 1795 0007 B 1795 0005--
Tube 9037 with locking spring
Door height
Rod length
Item
Up to 2,250 mm 2,251 mm – 2,500 mm 2,501 mm – 2,750 mm 2,751 mm – 3,000 mm
1,135 mm
B 9037 0001
1,385 mm
B 9037 0002
1,635 mm
B 9037 0003
1,885 mm
B 9037 0004
Other options (upon request)
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollow-er
B 9000 0567 (for 1795)
90371795
36 37
Triple latch lock 6065 for fire rated doors
Range / Order numbers
Other options (upon request)
Specification text
BKS mortise tripe latch lock 6065 for fire rated doors suitable according to DIN 4102; provided for use with the additional latch locks 6138 and connectingtube 9013; stainless steel forendt, rounded; galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 9 mm malleable cast-iron follower; galvanized malleable cast-iron latch; 1-turn galvanized steel deadbolt; center distance 72 mm; _________ mm backset
Triple latch lock 6065 for fire rated doors
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollow-er
Latch, deadbolt and follower monitoringUnsafety latch fixing device
B 9000 0319B 9000 0435B 9000 0248
B 9000 0320B 9000 0436
Triple latch lock for profile cylinders
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
stainlesssteel
Rounded
Rounded
Rounded
B 6065 0203
B 6065 0209
B 6065 0207
B 6065 0204
B 6065 0210
B 6065 0208
B 6065 0161
B 6065 0211
B 6065 0169
B 6065 0162
B 6065 0212
B 6065 0170
65
80
100
38 39
Additional latch lock 6138 for triple latch lock 6065
Versions / Order numbers
Other options (upon request)
Specifictation text
Additional latch lockBKS additional latch lock 6138 for fire rated doors suitable according to DIN 4102; provided for use with the triple latch lock 6065 and connecting tube9013; stainless steel forend, rounded; galvanized enclosed lock case; galvanized malleable cast-iron latch; _____ mm backset
Connecting tubeBKS connecting tube 9013 for fire rated doors suitable according to DIN 4102; for use with triple latch lock 6065 and additional latch locks 6138;galvanized steel; _____ mm door height
Additional latch lock 6138 for triple latch lock 6065
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollow-er
B 9000 0459B 9000 0523
Additional latch lock 6138
ForendSurface
BacksetIn mm
FrontForm
Forend 20 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 24 mm for flush doors
stainlesssteel
Rounded
Rounded
Rounded
B 6138 0145
B 6138 0147
B 6138 0149
B 6138 0146
B 6138 0148
B 6138 0150
B 6138 0109
B 6138 0125
B 6138 0117
B 6138 0110
B 6138 0126
B 6138 0118
65
80
100
Connecting tube 9013
Door height
Length of tube (B)
Item
1,972 mm 2,222 mm 2,472 mm
713 mm
B 9013 0031
963 mm
B 9013 0032
1,213 mm
B 9013 0033
90136138
40 41
Safety lock 6306 for fire rated doors
Range / Order numbers
Specification text
BKS safety lock 6306 for fire rated doors suitable according to DIN 18250 – class 5; with a 6 mm thick stainless steel forend, rounded; galvanizedenclosed lock case, with assembly friendly guide of the cylinder fixing screw; 2 part steel follower, self-clamping, 9 mm; galvanized malleable cast-ironlatch; 2-turn galvanized steel deadbolt with a triple safety tumbler; center distance 72 mm; with latch levert function; ___ mm backset
Safety lock 6306 for fire rated doors
Other options (upon request)
BacksetIn mm
ForendAppearance Width Special designs
Possible striking platesFollower
Swiss round cylinder fixing holeDeadbolt and follower monitoringLatch and deadbolt with anti-friction coating
Gold platedforend
Forend dimensions20 x 235 mm
Forend dimensions24 x 235 mm
Lock for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 20 x 280 mm for rebated doors Forend 24 x 280 mm for flush doorsDIN LH DIN RH DIN LH DIN RH
Stainless steel
Rounded
Rounded
Rounded
Rounded
63060035
63060037
63060039
63060041
63060036
63060038
63060040
63060042
63060043
63060045
63060047
63060049
63060044
63060046
63060048
63060050
55
65
80
100
B 9000 0319B 9000 0435B 9000 0248
B 9000 0320B 9000 0436
Product featuresProduct features
The BKS locks in class 1 – 4 according to DIN 18 251Mortise locks for internal doors of class 1 – 4
Application: Light interior doors, such as in private living areas
Technical features:– warded or bath room lock without latch lever function– warded key in various curves– bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors– available as 55 mm backset– Possibility for through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – Key block to stop the warded key – revised enclosed lock case to automatically supply doors in standard production– various forends versions in regards to form and optics
Application: Light internal doors, such as in private living areas
Technical features:– Cylinder lock with latch lever function– prepared for use of profile cylinders according to DIN 18 252– available as 55 mm backset– Possibility of through fixing of conventional door furtniture such as roses, escutcheons or short backplate sets – enclosed lock case– various forend versions in regards to form and optics– 2-turn 20 mm deadbolt throw
Application: Contract doors and entrance apartment doors with frequent visitors in administrative and industrial buildings
Technical features:– Cylinder lock with latch lever function– provided for use of profile cylinders according to DIN 18 252– bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors– Clamping follower with stronger anti-friction bearing to eliminate free play in the operation of the lock by the door
furniture– can be supplied in backsets 55, 60, 65, 70, 80 and 90 mm– Possibilty of through fixing of conventional door furniture such as roses, escutcheons or short backplated sets – enclosed lock case– various forend versions in regards to form and optics– 2-turn 20 mm deadbolt throw
Application: Heavy contract doors with a great amount of visitors in administrative and industrial buildings (such asgovernment offices), which also have to provide increased demands in regards to burglary preventionTechnical features:– Cylinder lock with latch lever function– provided for use of profile cylinders according to DIN 18 252– bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors– Clamping follower with stronger anti-friction bearing to eliminate free play in the operation of the lock by the door fitting– can be supplied in backset 55, 60, 65, 70, 80, 90 and 100 mm– Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case– with anti-drill hardened swarf protection steel bushes– various forend versions in regards to form and optics– 2-turn 20 mm deadbolt throw
LatchHolds the door in closedposition.
ForendAs fixing element of the lock withthe door.The various design scopes onsurfaces and shapes must bespecified in the order.
DeadboltSecures a closed door againstunauthorized entry.
Locking methodDepending on the use as bathroom, warded key or cylinderlock.
Sound dampeningProvides the necessary silencewhen closing the door in case ofcontract mortise locks and heavyduty mortise locks.
Fixing hole for doorfurnitureProduces a solid and continuousthrough fixing of the door furniture.In class 4 with swarf protectionsteel bushes.
FollowerReceives the spindle of thedoor furniture operates thelock.
Lock casefully enclosed, it protects thefunction of the lock.
BacksetMust be specified inorders.
42 43
Class4
Class 3
Class 2
Class 1
Range / Order numbers
Warded lock
Specification text
Warded lockBKS internal mortise door lock 0215 in warded version according to DIN 18 251 – class 1; nickel silver painted forend (or stainless steel), rounded (orsquare); enclosed case with tapered form for an automatic access to the lock; plastic latch and deadbolt (or zinc die-cast for stainless steel front), plasticfollower with 8 mm square, for warded key with 72 mm center distance, with key block to stop the key, with warded key; 55 mm backset
Bathroom lockBKS bathroom mortise lock 0215 according to DIN 18251 – class 1Nickel silver painted forend (or stainless steel) with rounded (or square) form, enclosed tapered case for an automatic lock access, 55 mm backset,bathroom lock with a 78 mm distance, plastic latch and deadlock (or zinc die-cast for stainless steel front), plastic follower with 8 mm square, 8 mm zincdie-cast bathroom follower
Lock 0215 – class 1
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
stainlesssteel
squareRoundedsquare
Rounded
02150293021501800215029502150285
02150294021501090215029602150286
02150297021500870215029902150105
02150298021501060215030002150088
02150207021501700215030202150287
02150301021501710215030302150288
55
55
Bathroom lock
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
stainlesssteel
squareRoundedsquare
Rounded
02150305021503070215030902150289
02150306021503080215031002150290
02150311021500490215031302150067
02150312021500500215031402150068
02150315021501720215031702150291
02150316021501730215031802150292
55
55
45
Other options (upon request)
BacksetIn mm
ForendFinish Width Special version
Possible striking platesFollower
9 mmZinc die-cast latch +
deadbolt
S 401S 404S 411
280828092828
20 mm for flushdoors
Lock 0215 – class 1
44
Bathroom lockWarded lock
Brass, satin finishBrass, polishedBrass,hammerpaintedColoured painted
Range / Order numbers
Lock for profile cylinder
Specification text
BKS internal mortise lock 0415 for profile cylinders according to DIN 18 251 – class 2; nickel silver painted forend (or stainless steel), rounded (or square);enclosed case; plastic follower with 8 mm square; 72 mm center distance; with latch lever function; zinc die-cast latch and deadbolt; 55 mm backset
Lock 0415 – class 2
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
steelNickel-silver
stainlesssteel
Brass, satin finishBrass, polishedBrass,hammerpaintedColoured painted
squareRoundedsquare
Rounded
04150034041500310415007704150067
04150035041500320415007804150068
0415000504150009041500079041500019
04150006041500100415008004150020
04150007041500170415008104150041
04150008041500180415008204150042
55
55
47
Other options (upon request)
BacksetIn mm
ForendFinish Width Special versions
Possible striking platesFollower
9 mmLatch + deadbolt of
Zinc die-cast
S 401S 404S 411
280828092828
Lock 0415 – class 2
46
Lock 0515 – class 3
48
Range / Order numbers
Lock for profile cylinder
Specification textCylinder lockBKS mortise contract lock 0515 for profile cylinders according to DIN 18251 – class 3; nickel silver painted forend (or stainless steel); rounded (or square);galvanized enclosed locked lock case with assembly friendly guide of the cylinder fixing screw; zinc die-cast latch and deadbolt, reinforced steel anti-fric-tion bearing with plastic follower (for stainless steel forend: 2 part steel clamping follower, self-clamping) with 8 mm(or 9 mm) square, with sound damping; center distance 72 mm; with latch lever function; _____ mm backsetBathroom lockBKS mortise contract lock 0515 for bathroom doors; nickel silver painted forend (or stainless steel); rounded (or square); galvanized enclosed locked lockcase with assembly friendly guide of the cylinder fixing screw; zinc die-cast latch and deadbolt, reinforced steel anti-friction bearing with plastic follower(for stainless steel forend: 2 part steel clamping follower, self-clamping) with 8 mm (or 9 mm) square with sound damping; bathroom deadbolt with 78 mmdistance, zinc die-cast bathroom follower with 8 mm square; _____ mm backset
Lock 0515 – class 3
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
05150101051501030515010505150107051501090515011105150113051501150515012505150127051501290515013105150133051501350515013705150139
05150102051501040515010605150108051501100515011205150114051501160515012605150128051501300515013205150134051501360515013805150140
05150067051500010515011705150049051500750515000905150119051500330515008505150017051501410515005705150093051500250515014305150041
05150068051500020515011805150050051500760515001005150120051500340515008605150018051501420515005805150094051500260515014405150042
05150069051500030515012105150051051500790515001105150123051500350515008705150019051501450515005905150095051500270515014705150043
05150070051500040515012205150052051500800515001205150124051500360515008805150020051501460515006005150096051500280515014805150044
55
60
65
80
55
60
65
80
Bathroom lockForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
05150149051501510515015305150155051501570515015905150161051501630515017305150175051501770515017905150181051501830515018505150187
05150150051501520515015405150156051501580515016005150162051501640515017405150176051501780515018005150182051501840515018605150188
05150077051500050515016505150053051500810515001305150167051500370515008905150021051501890515006105150097051500290515019105150045
05150078051500060515016605150054051500820515001405150168051500380515009005150022051501900515006205150098051500300515019205150046
05150071051500070515016905150055051500830515001505150171051500390515009105150023051501930515006305150099051500310515019505150047
05150072051500080515017005150056051500840515001605150172051500400515009205150024051501940515006405150100051500320515019605150048
49
Other options (upon request)BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
7090
Follower
9 mmClampingfollower
Latch lockDeadbolt lockPlastic deadlock(only 55 mm backset)Offset deadbolt
Crank latchboltLatch fixing device
Warded insert
S 401S 404S 407S 411
280828092828
20 mm high. Bolt22 x 260 mm26 x 260 mm
Bathroom lockCylinder lock
steelNickel-silver
stainlesssteel
55
60
65
80
55
60
65
80
steelNickel-silver
stainlesssteel
Brass, satin finishBrass, polishedBrass,hammerpaintedColoured painted
Lock 0615 – class 4
50
Range / Order numbers
Lock for profile cylinder
Specification text
Cylinder lockBKS heavy duty contract mortise lock 0615 for profile cylinder according to DIN 18251 – class 4; stainless steel forend; rounded (or square); galvanizedenclosed lock case with assembly friendly guide of the cylinder fixing screw; malleable cast iron latch with maintenance-free guide slide bearing andsound damping (graphite or oil hole not required in the forend); steel deadbolt with tumbler, 2 part steel clamping follower, self-clamping with 8 mm (or 9 mm) square, reinforced steel friction bearing; with anti-drill hardened swarf protecting bushes made of steel; 72 mm center distance; with latch leverfunction; ____ mm backset
Bathroom lockBKS heavy duty contract mortise lock 0615 for bathroom doors; stainless steel forend; rounded (or square); galvanized enclosed lock case with assemblyfriendly guide of the cylinder fixing screw; malleable cast iron latch with maintenance-free guide slide bearing and sound damping (graphite or oil hole notrequired in the forend); steel deadbolt; 2 part steel clamping follower, self-clamping with 8 mm (or 9 mm) square, reinforced steel friction bearing; withanti-drill hardened swarf protecting steel bushes; bathroom locking with a distance of 78 mm, bathroom follower of zinc die-cast with an 8 mm square;____ mm backset
Lock 0615 – class 4
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
stainlesssteel
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
06150097061500870615009906150089061501010615009106150103061500930615010506150095
06150098061500880615010006150090061501020615009206150104061500940615010606150096
06150047061500010615004906150009061500510615001706150053061500250615005506150039
06150048061500020615005006150010061500520615001806150054061500260615005606150040
06150057061500030615005906150011061500610615001906150063061500270615006506150041
06150058061500040615006006150012061500620615002006150064061500280615006606150042
55
60
65
80
100
stainless steel
55
60
65
80
100
Bathroom lock
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsDIN LH DIN RH DIN LH DIN RH
Forend 20 mm for rebated doorsDIN LH DIN RH
Forend 24 mm for flush doors
squareRoundedsquare
Roundedsquare
Roundedsquare
Roundedsquare
Rounded
06150117061501070615011906150109061501210615011106150123061501130615012506150115
06150118061501080615012006150110061501220615011206150124061501140615012606150116
06150067061500050615006906150013061500710615002106150073061500290615007506150043
06150068061500060615007006150014061500720615002206150074061500300615007606150044
06150077061500070615007906150015061500810615002306150083061500310615008506150045
06150078061500080615008006150016061500820615002406150084061500320615008606150046
51
Other options (upon request)
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
7090
Follower
9 mmClamping follower
10 mm (only for wetroom execution)
Latch lockDeadbolt lockPlastic deadlock(only 55 mm backset)Latch + deadbolt withAnti-friction coatingFront bevel 3mm
Crank latchboltLatch fixingdeviceWarded insertWetroomexecutionoffset Deadbolt
S 350S 500S 204S 241
Brass, satinBrass, polished
22 x 260 mm26 x 260 mm
Bathroom lockCylinder lock
52 53
Product features
Pivot hook boltprovides a secureclosure of the door.
ForendAs fixing element of the lock withthe door.The various spezial versions forsurfacesAnd forms must bespecified when ordering.
LockingmethodFor profile cylinders
BacksetIn ordersMust be specified
Guiding pinFinds the correct position whenclosing the door
Lock caseAs stable galvanized design, it pro-tects the function of the lock with asmall behind backset
Product features
Special locks for internal doorsRoller latch locks 0055 + 1058
Sliding door locks for internal doors
Application: Swing doors
Technical features:– Profile cylinder lock– roller latch adjustable from the front, adjusting range of 4 - 12 mm– available in backset of 55 mm– galvanized lock case fully enclosed – Brass roller latch – Zinc die-cast deadbolt, 2 turns with a 20 mm deadbolt projection– various forend versions in regards to form and optics– also available as swing door – latch lock
Sliding door locks 0353 + 0393Application: Sliding doors in the living area
Technical features:– Profile cylinder lock– available in backset of 55 mm– galvanized lock case fully enclosed– with a chrome plated hook bolt– Spring handle with release button– various forend versions in regards to form and optics– may also be combined for 2-leaf sliding elements with counter-case G353– available without spring handle, only with hook bolt as 0393
Sliding door lock 0375Application: Sliding doors in the living area
Technical features:– profile cylinder lock with latch lever function, 60 mm distance– available in backset of 55 mm– Possibility of through fixing of conventional door furniture– galvanized lock case fully enclosed– Steel hook latch, usable DIN LH and RH
Sliding door lock 0381 + 038 HFApplication: Sliding doors
Technical features:– profile cylinder lock with latch lever function, 72 mm distance– can be supplied in backsets 55, 65, 70 and 80 mm– galvanized lock case fully enclosed– Steel hook latch, usable DIN LH and RH– optional with guiding pin as 0381HF to position the door when closing
FollowerReceives the of the door furnitureand operates the lock.
Deabolt lock 0010
54
Range / Order numbers
Lock for profile cylinder
Other options (upon request)
Specification text
BKS mortise deadbolt lock 0010 for profile cylinders; forend nickel silver painted (or stainless steel), square (or rounded); completely galvanized enclosedlock case; 2-turn zinc die-cast deadbolt, 20 mm projecting; ____ mm backset
Deadbolt lock 0010
ForendSurface
BacksetIn mm
ForendForm
Forend 18 mm for rebated doorsusable DIN LH + RH
Forend 20 mm for rebated doorsusablbe DN LH + RH
Front, 24 mm for rebated doorsusable DIN LH + RH
steelNickel-silver
square 00101001 00100110 0010010555
BacksetIn mm
ForendFinish Width
Special versions Possible striking plates
6580
Follower
S 412stainlesssteel
RoundedForend
55
Latch lock 0216
56
Range / Order numbers
Latch lock
Other options (upon request)
Specification text
BKS mortise latch lock 0216; nickel silver painted forend (or stainless steel), square (or rounded); completely galvanized enclosed lock case; plasticfollower with 8 mm square; zinc die-cast latch; ___ mm backset
Latch lock 0216
ForendSurface
BacksetIn mm
ForendForm
20 mm forend for rebated doorsDIN LH DIN RH
steelNickel-silver
square 02161001 0216100255
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
6065
Follower
S 400S 403
stainlesssteel
Rounded forend24 mm
57
Swing door lock 0055
58
Range / Order numbers
Lock for profile cylinder
Other options (upon request)
Specification text
BKS mortise door lock 0055 for profile cylinders; brass roller latch (for stainless steel forend: Roller latch also nickel plated), adjustable from the front;forend nickel silver painted (or stainless steel), square; completely galvanized lock case; 2-turn zinc die-cast deadbolt, 20 mm projecting; ____ mmbackset
Swing door lock 0055
BacksetIn mm
ForendFinish Width
Special versions Possible striking platesFollower
6065
S 440stainlesssteel
59
ForendSurface
BacksetIn mm
ForendForm DIN LH
Forend 20 mm Forend 24 mmusable DIN LH + RHDIN RH
steelNickel-silver
square 00551001 00551002 0055008255
Range / Order numbers
Swing door lock
Other options (upon request)
Specification text
BKS mortise swing door lock 1058; brass roller latch (for stainless steel forend: Roller latch also nickel plated), adjustable from the front; nickel silverpainted forend (or stainless steel), square; completely galvanized enclosed lock case
Swing door latch lock 1058
usable DIN LH + RH
BacksetIn mm
ForendFinish Width
Special versions Possible striking platesFollower
S 441Stainless steel
61
Swing door latch lock 1058
60
ForendSurface
BacksetIn mm
ForendForm
Forend 24 mm
steelNickel-silver
squareRounded
1058000110580002
Sliding door lock 0353 +G353
62
Range / Order numbers
Other options (upon request)
Specification text
Sliding door lock 0353BKS mortise sliding door lock 0353; spring handle with release button; with hook bolt, chrome plated; nickel silver painted forend (or stainless steel orbrass, satin finish), square; completely galvanized enclosed lock case; ___ mm backset
Counter-case G353BKS mortise counter-lock case G353 for sliding door lock 0353; spring handle with release button; recess for hook bolt; nickel silver painted forend (orstainless steel or brass, satin finish), square; completely galvanized enclosed lock case;
Sliding door lock 0353 +G353
Sliding door lock 0353
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
0353100103530052
55
Counter-case G353 for sliding door lock 0353
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
G3531001G3530017
55
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
6065
Follower
Rounded forend S 413
stainlesssteelBrass, satinfinish
63
Counter-case G353Sliding door lock 0353
Sliding door lock 0371 + 0372
64
Range / Order numbers
Specification text
Sliding door lock 0375BKS mortise sliding door lock 0371 for profile cylinders (or warded keys); with hook bolt, chrome plated; nickel silver painted forend, square (or rounded);completely galvanized enclosed lock case; (warded version with solid key); ___mm backset
Sliding door lock 0375BKS mortise sliding door lock 0372 with folding key ring key; with curved bolt, chrome plated; nickel silver coated front, square (or rounded); completelygalvanized enclosed case; with warded key in folding key ring version; ___ mm backset
Sliding door lock 0371 + 0372
Sliding door lock 0371 for profile cylinders
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
0371003903710040
55
Sliding door lock 0371 for warded version with solid key
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
0371012303710089
55
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
0372001903720006
55
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates plates
6065
Follower
Rounded forend0371 in bathroom design
S 413Stainless steel
65
Other options (upon request)
Warded versionProfile cylinder
Sliding door lock 0372 for warded version with warded keyin folding key ring version
Sliding door lock 0375
66
Range / Order numbers
Lock for profile cylinder
Specification text
BKS mortise sliding door lock 0375 for profile cylinders; with steel hook latch; nickel silver painted forend (or stainless steel), square (or rounded);completely galvanized enclosed lock case; 2-part zinc die-cast follower with 8 mm square; with latch lever; 55 mm backset
Sliding door lock 0375
67
Other options (upon request)
BacksetIn mm
ForendFinish Width
Special versions Possible striking platesFollower
S 413Stainless steel
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mm
steelNickel-silver
squareRounded
0375001403750069
55
6065
Rounded forend0375 in bathroom design
Range / Order numbers
Specification text
Sliding door lock 038HBKS mortise sliding door lock 0381 for steel doors; with steel hook latch, galvanized; galvanized forend (or stainless steel), square; completely galvanizedenclosed lock case; measurements according to DIN 18 251; zinc die-cast steel sash follower half shells, 9 mm square; with latch lever; provided forprofile cylinders, 72 mm center distance; ____ mm backset
Sliding door lock 0381HF with guiding pinBKS mortise sliding door lock 0381HF for steel doors; with steel hook latch, galvanized; with guiding pin; galvanized forend (or stainless steel), square;completely galvanized enclosed lock case; measurements according to DIN 18 251; zinc die-cast steel sash follower half shells, 9 mm square; with latchlever; provided for profile cylinders, 72 mm center distance; ____ mm backset
Sliding door lock 0381H + 0381HF with guiding pin
Lock 0381H for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 24 mmusable DIN LH + RH
galvanized
square
square
square
square
03810007
03810008
03810017
03810010
55
65
70
80
Lock 0381HF for profile cylinder
ForendSurface
BacksetIn mm
ForendForm
Forend 24 mmusable DIN LH + RH
galvanized square03810009
03810016
65
70
BacksetIn mm
ForendFinish Width Special versions
Possible striking plates
55658090
Follower
S 448
stainlesssteel
69
Sliding door lock 0381H + 0381HF with guiding pin
68
Other options (upon request)
0381HF0381H
Range / Order numbers
Specification text
BKS mortise sliding door lock 0393; spring-loaded handle with release button; nickel silver painted forend (or stainless steel or brass, satin finish), square;completely galvanized enclosed lock case;
Sliding door lock with spring-loaded handle 0393
Lock
BacksetIn mm
FrontFinish Width Special versions
Possible striking platesFollower
Stainless steelBrass, satin fin-ish
71
Sliding door lock with spring-loaded handle 0393
70
Other options (upon request)
ForendSurface
BacksetIn mm
ForendForm
Forend 20 mmusable DIN LH + RH
steelNickel-silver
squareRounded
0393002303930017
72 73
Door handling
Front bevels
Locks with a sloping forends are required if the leading edge of the door is bevelled. The forend slope isexpressed according to a door thickness of 45 mm and is specified by the number of mm the slopedeviates from a right angle. Since doors currently may have various door thicknesses, it is recommend-ed that the angle is measured with a purpose made protractor and given on the order.The standard bevel in locks for internal doors is 3 mm, and 5 mm in locks for entrance doors.
Attention! Inward opening ebeveled locks actually receive a shorter backset and outward openingbeveled locks a larger backset.
The crank latchbolt is a two-part latch whose middle part hits the strike plate or thesteel door frame. This part pushes the latch into the lock forend by a lever actionn. Thusthe closing of the doorIs damped and quietened.
As an alternative, we also offer a special anti-friction coating for the standard latch,which also provides noise reduction.
The special BKS anti-friction coating has characteristics that no other coating methodhas:Chemical resistanceLow friction coefficientWater and oil repellentHeat and cold resistant
The low friction coefficient is of great significance for an easy and therefore quiet clo-sure of doors, especially also for doors with gasket.
Locks which are intended for Swiss round cylinders (such as KABA, KESO) require thefollowing attention:
The distance from the middle of the follower is 2 mm longer than the comparabledimension of profile cylinders.
Example: PZ 72 mm = CH-RZ 74 mm
Warded insert madeof metal
Single differKeyed alike
B 9080 0002B 9080 0003
In order to disable the latch of a mortise lock during daily operation, a latch fixing device may beinstalled in locks of class 3 + 4 upon request.A mortise lock with a withdrawn and fixed latch enables an unchecked door access.
After releasing the fixing device, the latch may then again be operated via the latch lever by usingthe lever
Note: The specification text must be added accordingly “...with latch fixing device”.
Latch fixing device
Crank latchbolt + special anti-friction coating
Swiss round cylinder
Warded insert
Product adviceProduct advice
Left outside – DIN leftLever showing to the left
Left inside = DIN rightLever showing to the left
Right inside = DIN leftLever showing to the right
Right outside = DIN rightLever showing to the right
Cent
er
Cent
er P
Z
Swis
sRo
und
cylin
der
Key hole profile 0 Key hole profile 1 Key hole profile 2 Key hole profile 3 Key hole profile 6 Key hole profile 7
Description Order NumberFeatures
Inside Inside Inside Inside
Outside Outside Outside Outside
75
Product features
74
Strike plate B 9000 for B 2154
Strike plate B 9000 for B 2154
Striking plates
Finish Order Number
DIN LHDIN RH
stainlesssteel
B 9000 0195B 9000 0196
Suitable for locks:B 2154
BKS lipped strike plate 9000 for automatic lockinglocks 2154; suitable for normal application, squareends
FinishOrder Numbersquare Rounded
DIN LHDIN RH
stainlesssteel
B 9000 0205B 9000 0206
B 9000 0203B 9000 0204
Suitable for locks:B 2154
BKS angular strike plate 9000 for automatic lockinglocks 2154; suitable for normal application, square(rounded) ends
Strike plates for rebated doors
Angular strike plates are used in conventional rebated doors in Germany.
The angle assures that the latch of the lock does not damage the door frame and lock arbitrarily when closingthe door.
This is supported by the use of locks with a special anti-friction coating on the latch or on the crank latch-bolts.
Strike plates for flush doors
Lipped strike plates are used in the flush doors common in Europe and Germany.
The lip assures that the latch of the lock does not damage the surface of the door frame and close arbitrarilywhen closing the door.
This is supported by the use of locks with a special anti-friction coating on the latch or on the crank latch-bolts.
Safety strike plates for entrance doors
Frames must be stable and connected to the masonry. Strike plates that are extended or anchored in mason-ry S350 or S500 may impede opening the door in the lock area essentially.A masonry anchor provides increased safety.
The possibility also exists to achieve greater safety with strike plate S204 in the area of entrance apartmentdoors. A stable receiving plate provides a solid connection with the frame.
Strike plates for internal doors
A wide variety of strike plates is used in conventional internal doors in Germany. So-called “U” shaped strikeplates are frequently used by the door manufacturers. These are identified by an appropriately formed strikeplate which is generally created on the same surface as the appropriated mortise locks.
The plastic furring provide an attractive appearance of the frames on the frequently open doors.
The strike plates are generally assembled from the inside of the frame and resists normal application.
Range / Order numbers
Range / Order numbers
Strike plate B 9000 for 1206/2114/2124/2174/2327/2338/6065/6306
Other options (upon request)
Finish Special versions
Long design (235 mm)Various lip lengths
Square forend
Suitable for locks:1206 23272114 23382124 60652174 6306
BKS lipped strike plate 9000, for locks1206/2114/2124/2174/2327/2338/6065/6306; Short design; suitable for normal application; roundedends
Finish Order Number
DIN LHDIN RH
stainlesssteel
B 9000 0435B 9000 0436
Range / Order numbers
Strike plate B 9000 for 1206/2114/2124/2174/2327/2338/6065/6306
Suitable for locks:1206 23272114 23382124 60652174 6306
BKS angled strike plate 9000, for locks1206/2114/2124/2174/2327/2338/6065/6306;usable DIN Left + Right; suitable for normalapplication
FinishOrder Numbersquare Rounded
DIN LHDIN RH
Stainless steel B 9000 0247 B 9000 0248
Range / Order numbers
7776
Strike plate B 9000 for spring bolt lock 1795
Suitable for locks:1795
BKS lipped strike plate 9000, for latch 1795; suitable fornormal application; rounded ends
Finish Order Number
DIN LHDIN RH
Stainless steel B 9000 0567
Range / Order numbers
Strike plate B 9000 for locks 1206/2124/2174/2327/2338/6065/6306
Striking plates Striking plates
Suitable for locks:1206 23272114 23382124 60652174 6306
BKS strike plate 9000, straight, for locks1206/2114/2124/2174/2327/2338/6065/6306; Suitable for normal application;Rounded form
Finish Order Number
DIN LHDIN RH
Stainless steelB 9000 0319B 9000 0320
Range / Order numbers
79
Striking plate S204
Striking plate S241
Striking plates
Other options (upon request)
Finish Crank dimension Order Number
0IronSatin nickel-plated S2040008
Finish Special versions
Brass, polishedBrass, satin finish
Suitable for locks:0515 62060615 630660316043
BKS safety angled Striking plate S204 for entranceapartment doors; with furring for a 20 mm deadboltprojection; suitable for heavy application; suitable forDIN LH + DIN RH
Other options (upon request)
Finish Crank dimension Order Number
0 S2410004
Finish Special versions
Gold-plated iron
Iron
Suitable for locks:0515 62060615 630660316043
BKS safety angled striking plate S241 for entranceapartment doors; with furring for a 20 mm deadboltprojection; suitable for heavy application; suitable forDIN LH + DIN RH
78
Strike plate B 9000 for B 6138
Strike plate B 9000 for additional latch lock 6138
Striking plates
Suitable for locks:6138
BKS lipped strike plate 9000, for additional latch lock6138; suitable for normal application; rounded ends
Suitable for locks:6138
BKS angled strike plate 9000, for additional latch lock6138; suitable for normal application; rounded ends
FinishOrder Number
DIN LHDIN RH
Stainless steel B 9000 0523
Range / Order numbers
FinishOrder Number
DIN LHDIN RH
Stainless steel B 9000 0459
Range / Order numbers
Range / Order numbers
Range / Order numbers
81
Striking plate 2808
Striking plate 2809
Striking plates
80
Striking plate S350
Strike plate S500
Striking plates
Other options (upon request)
Finish Order Number
Brass, satin finishNickel-plated
yellowchromatized
S3500005
S3500002
Finish Special version
Brass, polishedBrass, satin finish
Suitable for locks:06151206604362066306
BKS safety angled striking plate S350 for apartmententrance doors; 350 mm long; side length of 20 x 20mm; square ends, suitable for heavy application; suit-able for DIN LH + DIN RH
Other options (upon request)
Finish Order Number
steelNickel-silver
stainlesssteel
S2800049
S2800015
FinishSpecial versions
Furring for 2-turn locks
Brass, polishedBrass, satin finish
Suitable for locks:02150415
BKS SECUR striking plate 2808 for internal door locksaccording to DIN 18251; with plastic furring for singleturn locks; with attaching lip; suitable for mediumapplication; suitable for DIN LH + DIN RH
Other options (upon request)
Finish Order Number
Brass, satin finishNickel-plated
yellowchromatized
S5000003
S5000002
Finish Special versions
Brass, polishedBrass, satin finish
Suitable for locks:06151206604362066306
BKS safety angled strike plate S500 forapartment entrance doors; 500 mm long; side lengthof 20 x 20 mm; square ends, suitable for heavy appli-cation; suitable for DIN LH + DIN RH
Other options (upon request)
Finish Order Number
steelNickel-silver
stainlesssteel
S2800048
S2800016
Finish Special versions
S2800013S2800014
Brass, polishedBrass, satifn finish
Suitable for locks:02150415
BKS angled striking plate 2809 for internal door locksaccording to DIN 18251; 20 mm wide + 9 mm thick;with plastic furring for single turn locks; with attach-ing lip; suitable for medium application; suitable forDIN LH + DIN RH
Range / Order numbers
Range / Order numbers
Range / Order numbers
Range / Order numbers
BKS lipped strike plate S404 for internal doors withrounded ends and for external doors with square endsaccording to DIN 18251; suitable for light application
83
Striking plate S403
Striking plate S404
Striking plates
82
Striking plate S400
Striking plate S401
Striking plates
Other options (upon request)
Finish Order Number
steelNickel-silver
stainlesssteel
S4000013
S4000008
Finish Special versions
Brass, polishedBrass, satin finish
Suitable for locks:0216
BKS angled striking plate S400 for BKS latch lock0216; suitable for light application; square ends; suit-able for DIN LH + DIN RH
Finish Order Number
DIN LHDIN RHDIN LHDIN RH
steelNickel-silver
stainlesssteel
S4040019S4040020S4040015S4040016
Finish Order Number
DIN LHDIN RHDIN LHDIN RH
steelNickel-silver
stainlesssteel
S4040104S4040105S4040011S4040012
Suitable for locks:0216
BKS lipped strike plate S403 for BKS latch lock 0216;suitable for light application; rounded ends; suitablefor DIN LH + DIN RH
Suitable for locks:0215, 0515, 6031, 0415, 0024, 0672
Finish Order Number
steelNickel-silver
stainlesssteel
S4010088
S4010012
Range / Order numbers internal doorsRange / Order numbers internal doors
Range / Order numbers entrance doors
Finish Order Number
steelNickel-silver
stainlesssteel
S4010091
S4010050
Range / Order numbers external doors
BKS angled striking plate S401 for internal door lockrelative to DIN 18251; suitable for light application;rounded ends (10 mm radius); for internal doors andsquare ends for external doors; suitable for DIN LH +DIN RH
Suitable for locks:0215 0515 60310415 0024 0672
Range / Order numbers Range / Order numbers
Finish Order Number
Roundedsquare
steelNickel-silver
S4030007S4030001
Other options (upon request)
Finish Special version
Brass, polishedBrass, satin finish
Other options (upon request)
Finish Special versions
Brass, polishedBrass, satin finish
85
Striking plate S412
Striking plate S413
Striking plates
84
Striking plate S407 for offset deadbolts
Striking plate S411
Striking plates
Other options (upon request)
Finish Order Number
DIN LHDIN RHDIN LHDIN RH
steelNickel-silver
stainlesssteel
S4070057S4070058S4070009S4070010
Finish Special versions
Brass, polishedBrass, sating finish
Suitable for locks:05156031
BKS angled striking plate S407 for internal door lockswith offset deadbolts; suitable for light application,rounded ends (6 mm radius)
Other options (upon request)
Finish Order Number
steelNickel-silver
Stainless steel
S4120024
S4120013
Finish Special versions
Rounded forend
Suitable for locks:0010
BKS striking plate S412 for BKS latch lock 0010;suitable for light application; square ends; suitable forDIN LH + DIN RH
Suitable for locks:0371 03530372 0375
BKS striking plate S413 for BKS sliding door locks0371/0372/0353/0375; suitable for light application;rounded endsusable DIN LH + RH
Other options (upon request)
Finish Order Number
steelNickel-silver
stainlesssteel
S4110104
S4110014
FinishSpecial versions
Furring for 2-turn locks
Brass, polishedBrass, satin finish
Suitable for locks:0215 05150415 6031
BKS angled striking plate S411 for internal door locksaccording to DIN 18251; with plastic furring for oneturn locks; suitable for light application; suitable forDIN LH + DIN RH
Range/Order numbers for 0371/0372/0353
Range/Order numbers for 0375
Range / Order numbersRange / Order numbers
Range / Order numbers
Finish Order Number
squareRoundedsquare
Rounded
steelNickel-silver
stainlesssteel
S4130023S4130026S4130004S4130008
Finish Order Number
squareRoundedsquare
Rounded
steelNickel-silver
Stainless steel
S4130039S4130036S4130012S4130016
87
Striking plate S448
Striking plate 2828
Strking plates
86
Striking plate S440
Striking plate S441
Striking plates
Finish Order Number
steelNickel-silver
stainlesssteel
S4400012
S4400004
Suitable for locks:0055
BKS strike plate S440 for BKS swing door locks 0055;suitable for light application; square ends; suitable forDIN LH + DIN RH
Finish Order Number
galvanized
stainlesssteel
S4480003
S4480002
Finish Order Number
galvanized
stainlesssteel
S4480004
S4480009
Suitable for locks:0381H0381HF
BKS strike plate S448 for BKS sliding door locks 0381;suitable for medium application wear; square ends;suitable for DIN LH + DIN RH
Other options (upon request)
Finish Order Number
steelNickel-silver
S4410011
Finish Special versions
stainlesssteel
Suitable for locks:1058
BKS strike plate S441 for BKS swing door locks 1058;suitable for light application; square ends; suitable forDIN LH + DIN RH
Other options (upon request)
Finish Order Number
steelNickel-silver
stainlesssteel
S2820069
S2820061
FinishSpecial versions
Furring for 2-turn locks
Brass, satin finishBrass, polished
Suitable for locks:02150415
BKS “U” shaped strike plate 2828 for internal doorlocks according to DIN 18251; 28 mm wide + 8 mmthick; with plastic furring for single turn locks; withattaching clamp; suitable for medium application;suitable for DIN LH + DIN RH
Range/Order numbers for 0381H
Range/Order numbers for 0381HF
Range / Order numbers
Range / Order numbers
Versions / Order numbers
The following information regarding locks must be observed in accordance withthe manufacturer's liabilities of his products defined in the product liabilitiesstatute.
Noncompliance releases us from any liabilities.
1. Product information and use as directedA lock generally has the function to lock and block a door. Simple lock designsserve only to lock the door. This designates that a door is kept closed so that itcannot be opened by pulling or pushing, but may be opened by a simple method,such as by moving the lever. The lock latch – generally only called latch – servesas lock.
Securing the closed door by at least one projecting door latch or by blocking of adeadbolt, which meshes into the appropriate recess of the jamb and or the lock-ing plate, is called blocking.
The deadbolt must be blocked against pushing back in its projected position. Inaddition, the door must be effectively difficult to open without the proper key.
The door may only be blocked in a previously closed condition.Cylinder attachment screws must be coordinated or adjusted to the backsetlength.
A mortice lock is a lock which is inserted into a recess in the door leaf (lock pock-et) and screwed on.The following must be observed to assure proper use:- Locks, locking plates, door fittings, attaching devices and locking cylinders
must be matched.
- The current “state of technology” must be applied for a proper installation, themaintenance and possibly a replacement. This is documented in the stan-dards of these products and in instructions or manufacturer's catalogues.
Locks for anti-panic doors or special locks generally do not require an immediateuse of keys when activating the door fitting (such as the door lever).Locks for anti-panic doors or special locks may only be combined with lockingcylinders with a so-called turning handles (such as knob cylinders) if this is con-tractually approved by the lock's manufacturer. It is commonly suggested thatonly the owners of the keys have the right to activate the lock, meaning that theactivation of a lock through a knob cylinder (or without a key) is not considered tobe as a normal case.
Simultaneously pulling back the latch and the prelocked deadbolt only by activat-ing the door lever is a special case and may not replace the “normal” key rota-tion to pull back the deadbolt.
Locking cylinder may only be unconditionally installed in locks when they are sub-ject to a dimension standard (DIN 18252) and if such locks are clearly preparedfor locking cylinders under this standard.In all other cases, the manufacturer, dealer, fabricator or consumer of such locksmust obtain the certainty that the locking cylinders he selected are suitable fortheir intended use.The necessary legal regulations and manufacturer's instructions must beobserved. For example, no locking cylinders with a button, knob, or a similar han-dle may be installed in anti-panic locks.General terms, provided these are not explained in catalogue pages, broschures,price lists or on the internet are explained in the standards relevant for theseproducts (such as DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209).Deviations from the particular relevant standard must be specified in the order.
2. Incorrect useAn incorrect use – meaning a product use not as directed– of locks, for example,is, when- The flawless use is prevented by inserting foreign objects into the lock or into
the locking plate.- When interfering or assaulting the lock or locking plate, which results in a
change of the structure, the effectiveness or the function.- The lock bolt is prelocked to keep the door open.- The closing elements are assembled to be blocked in their function or are
subsequently treated (for example, painted).- If a load is attached to the lever connection which exceeds the normal force
applied by hand.- If unsuitable, such as dimensionally deviating or incorrect keys are being
used.- If an expansion or reduction of the required door gap develops when re-
adjusting the hinges or when lowering the door.- If a non-approved double wing door is opened past the inactive wing.- When gripping between the door leaf and the jamb when closing the doors.- when simultaneously activting the lever and the key.
3. Product performanceIf the product performance is not explicitly defined in our catalogues, broschures,price lists, performance specifications, etc., the requirements must be coordinat-ed with us.
The relevant standards serve as guidelines (for example, DIN 18250, DIN 18251,DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN1303, DIN EN 1906, DIN EN 12209).
Basic requirements and additional requirements are defined in these standards.
The serviceability of locks also depends of the operating frequency, operatingmethod, environmental effects and maintenance.
Lock, strike plate, door fittings, locking cylinders and keys must be replaced assoon as problems occur despite proper maintenance.This also applies to attempts to forcefully overcome locks and their accessories(burglary attempts).
4. Product maintenanceLocks must be lubricated with suitable lubricants at least once per year – morefrequently after wear. Door fitting, strike plate and locking cylinder must bechecked for their proper condition and their installation. Only cleaning materialthat do not contain any corrosion-promoting ingredients may be used.
5. Information and instruction dutiesThe following documents and services are available to specialty dealers, lock-smiths, architects, planners, fabricators and users upon request, in order to com-ply with the informational and instructional duties of the product liability statutes:- Catalogues, broschures- Advertising copies, quotation documents, keying plans- The relevant standards serve as guidelines, for example, DIN 18250, DIN
18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN1125, DIN EN 1303, DIN EN 1906, DIN EN 12209 (Exclusive selling rights ofthe Beuth Verlag GmbH, Berlin 30).
- Instructions for installation, operation and maintenance
For the selection of locks and the installation, operation and maintenance,- architects and planners should consider to request and observe all required
product information from us.- Specialty dealers must consider to observe product information and refer-
ence in the price lists and specifically request all necessary instructions fromus and to forward these to the fabricators.
- Fabricators must consider to observe all product information and specifical-ly request operating and maintenance instructions from us and to forwardthese to contractors and consumers.
Product information for locks
88 89
The following references
must be noted when using
BKS locks and fittings.
1. The door leaf should not be drilled in the area ofthe lock installed.
2. The spindle should not be knocked through thefollower using a hammer. Carefully push a 2-partfollower00 by using a softface mallet.
5. The latch bolt and dead bolt should not be paintedover.
4. The distance between forend and striker should bebetween 2 and 5 mm.
3. The door leaf should not be carried using the handles.
Product information for locks
2 to 5 mm
8. The deadbolt should not be extended while thedoor is open.
9. The handle and the key should not be operatedsimultaneously.
10. Anti-panic locks should not be left with a key in them. 11. Anti-panic locks should not be fitted with lockingcylinders with thumb turn or turn knob.
6. The handle should not be operated in the wrongdirection. In use a maximum load of 150 N on the handleshould not be exceeded.
7. The lock should not be operated with any foreignobjects.
12. Panic doors should only be used in case of emergency(no frequent use).
13. Double leaf doors should not be forced open usingthe inactive leaf.
14. As soon as there are visible signs of physical attack(e.g. bent bolts), the lock must be replaced.
15. Locks are the be lubricated at least once a year(non-resinogenic oil).
Product information for locksProduct information for locks
9190
Exclusion of liability
The BKS products are permanently adapted to growing market's requirements and developed further.We also reserve for changes serving the technological progress.
This necessity is based on:– technical development– change and adaptation in product range– adaptation to changed laws and technical standards.
We have arranged the content of our documents with the greatest possible care.We therefore ask for your understanding that we take no responsibility for possible mistakes with regard to presentation and description of the products.Many thanks for your understanding.
year
DIN 107Description left and right in the construction industry
DIN 1080, part 1Terms, symbols and units in civil engineering, basics
DIN 4102, part 5 + 18Part 5: Fire performance of building materials and components; firebarriers, barriers in elevator shaft walls and fire-resistant glazingPart 18: Fire performance of building material and components; firebarriers; proof of “self-locking” properties (continuous operation test)
DIN 18 055Windows; joint impermeability, water penetration resistance andmechanical stress; specifications and tests
DIN 18,082, part 1 +3Part 1: Fire barriers, steel doors T30-1, model APart 3: Fire barriers, steel doors T30-1, model B
DIN 18 095, part 1 +2Part 1: Doors; smoke protection doors; terms and specificationsPart 2: Doors; smoke protection doors; design test of the long-termoperational reliability and weathertightness
DIN 18 100Doors; wall openings for doors; Dimensions compliant with DIN 4173
DIN 18 101Doors, doors for apartment construction; door leaf sizes, hinge seatingand lock seating; interrelationship between dimensions
DIN 18,111, part 1Door jambs, steel jambs, standard jambs for rebated doors
DIN 18 250Mortice locks for fire barriers
DIN 18 251Locks; mortice locks for doors
DIN 18 252Locking cylinders for door locks; terms, descriptions
DIN 18 255Building hardware; door handles, doorplates and door rosettes – terms,dimensions, specifications
DIN 18 257Building hardware; protective coatings – terms, dimensions, specifica-tions, tests and identifications
DIN 18 273Building hardware; door handle sets for fire barriers and smoke protec-tion doors – terms, dimensions, specifications and tests
DIN 18 357Official Contracting Terms for the Award of Construction PerformanceContracts Part C: General technical contract requirements for con-struction services (General Pricing Regulations) Fitting operations
DIN 18 361Official Contracting Terms for the Award of Construction PerformanceContracts Part C: General technical contract requirements for con-struction services, glazing operations
DIN 68 706 part 1Interior doors of wood and wood materials, barrier door leaves, terms,prefered dimensions, structural features
DIN EN 179Emergency exit locks with handle or joint plate
DIN EN 1125Anti-panic door locks with horizontal control bar
DIN EN 1154Door closing device with controlled closing process
DIN EN 1303Building hardware – locking cylinders for locks – specifications andtesting procedures
DIN V ENV 1627Windows, doors, fittings – burglary prevention – specifications andclassification
DIN V ENV 1628Windows, doors, fittings – burglary prevention – testing procedures tocalculate the resistance under static stress
DIN V ENV 1629Windows, doors, fittings – burglary prevention – testing procedures tocalculate the resistance under dynamic stress
DIN V ENV 1630Windows, doors, fittings – burglary prevention – testing procedures tocalculate the resistance to counter manual burglary attempts
DIN EN 1634 Part 1 + 3Fire resistance tests for door and connecting devicesPart 1: Fire barriersPart 3: Smoke protection barriers
DIN EN 1906Building hardware, door handles, and door knobs – specifications andtesting procedures
A complete Quality Assurance System in correspondence with DIN EN ISO 9001 guarantees consistently high quality of allprocesses at BKS.
This Quality Assurance standard applies the highest demands at the European level and is not relative to production, but also to otherbusiness sectors such as research, order processing or customer service. This standard applies to all manufacturing sections at BKS(locking cylinders, door locks, fittings, electronics and door closers).
The extensive product range of the G.U-BKS group is designed for heavy-duty use and coordinated.
The high performance level in regards to quality, dependability and long life can only be assured when coordinated products are used.The program variety of the G. U-BKS group makes it possible to use this advantage.
This is documented by the appropriate tests and registrations, relative to the standards and specifications.These certificates may be requested, if desired.
The most diverse standards and specifications exist for doors and related products. The most important are listed in the following:
QualityRelevant standards
92 93
1. General / Scope of Application
1.1 Our Sales Terms and Conditions are exclusively applicable; we do not recognise con-trary terms and conditions by the Purchaser or terms and conditions deviating fromour Sales Terms and Conditions unless they have been explicitly approved by us in wri-ting. Our Sales Terms and Conditions shall be applicable even if we carry out deliveryto the Purchaser without reservation and with the knowledge of contrary terms andconditions or terms and conditions deviating from our Sales Terms and Conditions.
1.2 All agreements made between us and the Purchaser in view of performance of thepresent contract have been stipulated in writing in the present contract.
1.3 Our Sales Terms and Conditions are only valid vis-à-vis a contractor within the mean-ing of § 14 BGB [German Civil Code].
1.4 Our Sales Terms and Conditions shall also be valid for subsequent orders. For currentand future business relations the Sales Terms and Conditions shall be valid as frame-work terms and conditions even if not explicitly agreed upon in future.
1.5 In addition to our General Terms and Conditions our "Installation Guidelines", "Installa-tion Instructions" and “Product Informations” shall be valid.
2. Offer / Offer Documentation
2.1 Our offer is subject to alterations unless otherwise specified in the order confirmation.After a purchase order has been placed by the customer, a contract is entered into byour written order confirmation. The contents of the contract shall be governed by ourwritten order confirmation.
2.2 Warranty of a quality or acceptance of an independent guarantee on contract conclu-sion moreover must be explicitly identified in writing accordingly.
2.3 Subsequent modifications of the contract contents must also be made in writing. 2.4 We reserve property rights and copyrights in illustrations, drawings, calculations and
other documents; they must not be made available to third parties. This is especiallyapplicable to such written documents identified as being "confidential". Prior to theirtransmittal to third parties the Purchaser requires our explicit written approval.
3. Prices / Payment Terms and Conditions
3.1 Unless otherwise specified in the order confirmation, our prices are to be understood"ex works" excluding packing and transport charges, insurance and other contingen-cies; these shall be invoiced separately.
3.2 For pieces or parts which we produce on a special demand or order of the Purchaserwe inform the Purchaser about the amount of the production.
3.3 Statutory value-added tax is not included in our prices; it will be shown separately onthe invoice on the day of invoicing in the amount stipulated by law.
3.4 Discount deduction requires a special written agreement. Independent of such a writ-ten agreement it is stipulated that a discount of 3 % on the net invoice value shall begranted if payment is received within 10 days as from date of invoice. If payment isreceived within 30 days, we will grant 2 % discount on the net invoice value. No dis-count will be granted on new invoices as long as still open balances from former invo-ices exist. Payments will always be used for settlement of the oldest debit item.
3.5 Unless otherwise specified in the order confirmation, the purchase price is due forpayment net (without deduction) within 60 days as from date of invoice. If thePurchaser defaults, we shall be entitled to request arrears on interest in the amount of8 % above the respective basic interest published. But the Purchaser shall be entitledto prove to us that no damage or a damage of a far minor importance has occurred forus as a result of the delay of payment.
3.6 The Purchaser shall only be entitled to setoff rights if his counterclaims have legalforce, are undisputed or have been recognised by us. The Purchaser shall be entitledto exercise a general lien in so far as his counterclaim is based upon the same con-tractual relationship.
3.7 We shall not be obliged to accept bills of exchange or cheques. If cheques or bills ofexchange are accepted on a case to case basis upon prior agreement, this will only bemade in fulfilment by invoicing the discount charges and collection charges whichhave to be paid by the customer immediately in cash. Accepted bills and cheques willbe finally credited after having been honoured. Acceptance of cheques or bills ofexchange will be made without prejudice for later payment obligations. We shall notbe responsible for timely presentation, protest and return of the bill of exchange, if ithas not been honoured.
3.8 If a bill of exchange or a cheque is not honoured in time or if a payment term grantedis exceeded, all debts still open at that time – also debts for which a respite has beengranted and debts for which bills of exchange or cheques have been given – becomeimmediately due for payment.
4. Delivery / Delivery Time
4.1 Prior to start of the delivery time indicated by us all technical questions must havebeen clarified. If we inform the Purchaser about delivery times these informations arenot binding and show only a foreseeable delivery time.
4.2 Observance of our delivery obligation moreover requires timely and orderly fulfilmentof the Purchaser's obligations, especially observance of the agreed upon paymentterms and conditions. The defence of a non-fulfilled contract remains reserved.
4.3 If the Purchaser has been put on notice to take delivery or if he violates any otherduties of co-operation, we shall be entitled to request indemnification of the damageincurred to us to that extent including eventual surplus expenditure. Further claimsremain reserved.
4.4 If the prerequisites of item 4.3 exist, the risk of an accidental destruction or an acci-dental deterioration of the object purchased passes onto the Purchaser at that point intime when the Purchaser has been put on notice to take delivery or is in debtor's delay.
4.5 If non-observance of the delivery time is due to Force Majeure such as for examplemobilization, war, riot or similar incidents such as for example strike, lock-out, thedelivery time is extended by the duration of the incidents causing the delay in so faras these impediments can be proven to have a major influence on completion or deli-very. The same applies if these circumstances occur at sub-suppliers.
4.6 Partial deliveries are admissible within a reasonable extent. 4.7 We shall be liable in general only for delay in delivery in accordance with statutory pro-
visions of the German Commercial Code and the German Civil Code. 4.8 Moreover we shall be liable in accordance with statutory provisions in so far as the
delay in delivery is based upon an intentional or grossly negligent contract violationfor which we are responsible; we shall also be responsible for a fault caused by ourrepresentatives or vicarious agents.
4.9 In so far as the delay in delivery is merely based upon simple fault and no mandatoryliability is applicable due to violation of life, body or health, our liability for defaultdamages is limited in such a way that the Purchaser can request each 0.5 percent foreach completed week of delay but in total not more than 5 percent of the price for thatdelivery portion which due to the delay could not be put into useful operation. This isnot connected with a modification of the burden of proof to the Purchaser's disad-vantage. The Purchaser's legal right to rescind remains unaffected.
4.10 Goods which have been reported to be ready for shipment have to be called by thePurchaser immediately but not later than after a delay of 20 calendar days after havingbeen informed of the readiness for shipment. If no call occurs, we shall be entitled toput the goods on stock and store them upon our own discretion at Purchaser's riskand treat them as delivered ex works.
4.11 If shipment or delivery of the goods is delayed on request or upon instigation of thePurchaser, storage charges may be invoiced starting from one month after notificationof readiness for shipment in the amount of 1% of the invoice value for each monthstarted. The storage charges shall be limited to 5 % of the invoice value unless higherstorage charges can be proven by us.
4.12 Fulfilment of our obligation in accordance with the German Packaging Regulations hasbeen transferred by us to a authorized Company who sets up appropriate collectingboxes for packing material which has to be taken back in places where large quanti-ties and small quantities of packing material occurs. Overwraps and sales packageswill be taken back by us only via this authorized Company. Outside the scope of appli-cation of the Packaging Regulations no packing material will be taken back by us.
5. Participation Duties of our Customers
5.1 Participation services by the customer which are explicitly or tacitly agreed upon wit-hin the scope of the contract will be performed without special remuneration unlessspecified otherwise.
5.2 The customer shall be obliged to inform us on all facts in time from which it resultsthat stock and products in store with us which have been placed at disposal in view ofproduction capacities reported to us cannot be used or cannot be fully used. If resi-dual stock remains, the customer will accept the stock and eventual charges for theirdestruction in case of premature modification of his disposition. The same applies alsoto products for which we had to order minimum quantities from our suppliers in sofar as we had pointed out this fact to our customer in advance.
5.3 The customer guarantees that the products supplied by him for further processing aresuitable for this purpose. We are not obliged to inspect the products supplied by thecustomer for their property and fitness in view of further processing. Within the scopeof current business relations as well as when a processing item has primarily beeninspected, tested and released, the customer shall be obliged to inform us of his ownaccord about each product change. In cases of current processing of items the custo-mer shall be further obliged – for each modification of the production conditions in hisplant especially when replacing tools, machines or when introducing new productionprocedures – to inspect the item to be processed by us for variations and modifica-tions and to inform us in writing of such variations and modifications.
5.4 We shall not be obliged to check the correctness of instructions given by our custo-mers, material selection or other provisions made by our customer.
5.5 Therefore the customer must check all instructions he is giving as well as the qualityof the materials specified or made available to us for compliance with statutory andtechnical provisions.
5.6 If the customer defaults regarding his duty of procurement or participation after writ-ten request, we shall be entitled to statutory rights.
5.7 The taking back of goods requires an explicit written approval, if we are not obligateto take back the goods by law.
6. Passing of Risk
6.1 Unless otherwise specified in the order confirmation, delivery shall be deemed to beagreed upon "ex works".
6.2 The risk for delivery passes onto the customer when leaving our works, at the latestwith shipment of the consignment and/or delivery to the carrier or forwarding agenteven if partial deliveries are made or if exceptionally we carry out transport at our ownexpenses or with our transportation means unless otherwise specified.
6.3 If shipment is delayed due to circumstances for which the customer is responsible, therisk passes onto the customer with receipt of the notification of readiness for ship-ment.
6.4 Return shipments must be returned to us carriage-free. In case of return shipment therisk of loss remains with the customer until the products have been accepted at ourworks.
6.5 If the customer so requests, we will effect a transport insurance for the shipment; thecharges connected with it will be borne by the customer.
7. Redhibitory Defects
We shall be liable for redhibitory defects as follows:7.1 All such parts or services have to be reworked, newly delivered or rendered again free
of charge upon our choice which within the statutory limitation – irrespective of theoperating period – show a redhibitory defect in so far as its cause existed at the timeof passing of risk.
7.2 Claims due to redhibitory defects become barred by the statute of limitations in 12months. The time period starts with the passing of risk (item 6).
7.3 The customer must notify the redhibitory defect to us immediately in writing.7.4 In case of notification of defects payments by the customer are permitted to be with-
held within a scope which is in an adequate ratio to the redhibitory defects occurred.The Purchaser shall only be allowed to withhold payments if a notification of defectshas been put forward the justification of which cannot be doubted. If the notificationof a defect was wrong, we shall be entitled to request indemnification of expendituresincurred by us from the customer.
7.5 First of all we shall always be granted the possibility of subsequent performance withinan adequate delay.
7.6 If subsequent performance fails, the Purchaser may withdraw from contract – withoutprejudice to eventual damage claims – or reduce payment. Replacement for fruitlessexpenditure can only be requested by the Purchaser, if we are responsible for thedefect due to intent or gross negligence.
7.7 Claims as a result of defects do not exist in case of only minor variation from theagreed upon quality, in case of only minor impairment of usefulness, in case of natu-ral wear and tear or damages occurring after passing of risk due to wrong or negligenttreatment, excessive load, inappropriate consumables or due to special externalinfluences which are not presumed according to contract as well as in case of non-reproducible software errors. If the Purchaser or third parties carry out modificationsor repair work in an inappropriate way, no claims as a result of defects exist for it andthe resulting consequences either. The same applies in so far as our specifications forhandling and other instructions are not observed.
7.8 Claims by the Purchaser for expenditure necessary for the purpose of subsequent per-formance including but not limited to transport, road, work and material charges areexcluded to the extent that the expenditure increases because the object of deliveryhas subsequently been taken to another place than the establishment of the Purchaserunless this change of location corresponds to its use according to purpose.
7.9 Legal recourse claims by the Purchaser towards us exist only in so far as the Purchaserhas not made any agreements with his customer beyond statutory claims due to defects.
7.10 For damage claims item 9 applies. Further or other claims than those stipulated in thisitem or in item 9 for redhibitory defects are excluded.
8. Industrial Property Rights and Copyrights, Defective Titles
Unless otherwise agreed upon, we shall be obliged to render delivery only in the coun-try of the place of delivery free from industrial property rights and copyrights by thirdparties (hereinafter called property rights). In so far as a third party due to violation ofproperty rights by deliveries rendered by us and used according to contract, puts for-ward justified claims against the Purchaser, we shall be liable to the Purchaser withinthe delay determined in item 7.2 as follows:
8.1 Upon our choice and at our own expenses we will either obtain a right of use (usu-fructuary right) for the deliveries concerned, modify them in such a way that the pro-perty right will not be violated or replace them. If this is not possible for us under ade-quate terms and conditions, the Purchaser shall be entitled to statutory rights of with-drawal or reduction. The Purchaser shall only be allowed to request indemnificationfor fruitless expenditure, if we are liable for intent or gross negligence. Our obligationto pay damages is governed by item 9.
8.2 The above mentioned obligations exist only in so far as the Purchaser informs usimmediately in writing about the claims put forward by the third party, does not recog-nise a violation and all defences and composition proceedings are reserved for us. Ifthe Purchaser ceases to use the delivery for reasons of damage reduction or for otherimportant reasons, he shall be obliged to inform the third party that no acknowledge-ment of a violation of property rights is connected with it.
8.3 Claims of the Purchaser are excluded in so far as he is responsible for the violation ofproperty rights.
8.4 Claims of the Purchaser are also excluded in so far as the violation of property rightsis caused by particular specifications of the Purchaser, by an application unforeseea-ble by us or by the fact that the delivery is modified by the Purchaser or used toget-her with products not delivered by us.
8.5 In case of violations of property rights for the claims of the Purchaser stipulated initem 8.1 the provisions of items 7.4, 7.5 and 7.9 apply accordingly.
8.6 Further claims of the Purchaser or other claims of the Purchaser than those stipulatedin the present item 8 against us or our vicarious agents for defective title are excluded.
9. Total Liability
9.1 Claims by the Purchaser for indemnification – irrespective of the legal nature of theclaim put forward – are excluded.
9.2 Excluded from this provision are:a) Damages due to violation of substantial contractual obligations. In case of simple
negligence, however, liability for indemnification shall be limited to the foreseeabledamage typically occurring.
b) Damages due to violation of life, body or health if we are responsible for the breachof duty.
c) For other damages based upon an intentional or grossly negligent breach of dutywith us being equally responsible for a breach of duty by our legal representativesor vicarious agents.
d) Indemnification for impossibility or inability.
9.3 No modification of the burden of proof at the Purchaser's disadvantage is connectedwith the above provision.
9.4 Liability according to the liability for products' law remains unaffected.9.5 In so far as liability for indemnification towards us is excluded or restricted, this
applies also to personal liability for indemnification by our employees, our commerci-al agents and our vicarious agents.
10. Retention of Title
10.1 The objects of the deliveries (goods under retention of title) remain our property untilpayment of all debts to which we are entitled from the business relationship. In so faras the value of all securities to which we are entitled towards the Purchaser exceedsthe amount of all claims secured by more than 10 %, we will release a correspondingshare of the securities on request by the Purchaser.
10.2 During existence of the retention of title the Purchaser shall not be permitted toencumber the goods or pledge them as security and resale is only permitted to resel-lers in normal dealings and only with a proviso that the reseller receives payment fromhis customer or makes the reservation that transfer of title will only occur if the custo-mer has met his payment obligations.
10.3 In case of attachments, seizures or other orders or interference by third parties thePurchaser must inform us immediately so that we can institute a claim according to §771 ZPO [German Civil Practice Act]. In so far as the third party is not able to reim-burse the court costs and extrajudicial costs of a claim according to § 771 ZPO, thePurchaser shall be liable for the loss incurred by us.
10.4 The Purchaser is obliged to take good care of the item purchased; especially he is obli-ged to insure the item purchased at his own expenses sufficiently at original valueagainst fire, water and theft. In so far as maintenance and inspection work are requi-red, the Purchaser must carry out such work in time at his own expense.
10.5 In case of breaches of duty by the Purchaser including but not limited to delay of pay-ment, we shall be entitled to withdrawal and taking back; the Purchaser is obliged torestitution. Withdrawal and/or exercise of the retention of title does not require rescis-sion by the Supplier; these actions or an attachment of the goods under retention oftitle by us does not represent a withdrawal from contract unless this has explicitlybeen declared by us.
10.6 If the Purchaser has resold the purchased item in the ordinary course of business, heassigns, however, to us already now all debts in the amount of the final invoice value(including value-added tax) of our debts accruing for him from resale against hiscustomers or third parties regardless of whether the purchased item has been resoldwithout or after further processing. The Purchaser remains authorised to collect thisdebt also after assignment. Our authority to collect the debt ourselves remains unaf-fected. But we undertake not to collect the debt as long as the Purchaser meets hispayment obligations from the proceeds taken in, does not default in payment and inparticular no petition for opening of insolvency proceedings has been filed or insol-vency exists. But if this is the case, we can request that the Purchaser informs usabout the debts assigned and their debtors, gives all information necessary for collec-tion, hands out the respective documents and informs the debtors (third parties) of theassignment.
10.7 Processing or reshaping of the purchased item by the Purchaser will always be madeon behalf of us. If the purchased matter is processed with other objects not belongingto us, we acquire joint ownership in the new object in the ratio of the value of the pur-chased item (final invoice value including value-added tax) to the other processedobjects at the time of processing. For the object created by processing moreover thesame applies as for the purchased item delivered under retention of title.
10.8 If the purchased item is mixed inseparably with other objects not belonging to us, weacquire joint ownership in the new item in the ratio of the value of the purchased item(final invoice value including value-added tax) to the other mixed objects at the time ofmixing. If the mixing occurs in such a way that the item of the Purchaser has to beconsidered the main item, it is deemed to have been agreed upon that the Purchasertransfers pro rata joint ownership to us. The Purchaser holds in custody for us theexclusive ownership or joint ownership thus created.
11. Place of Performance, Venue, Governing Law
11.1 For all rights and duties resulting from our deliveries and services for both parties theregistered office of our company shall be considered to be the place of performance.
11.2 In dealings with companies for lawsuits for which the district courts have jurisdictionin rem, the Velbert District Court, and for lawsuits for which county courts have juris-diction in rem, the Wuppertal County Court shall have general jurisdiction.
11.3 The contractual relationship shall be governed by the law of the Federal Republic ofGermany. Application of the UN Convention on Contracts for the International Sale ofGoods (CISG) is excluded.
11.4 The data specified by the Purchaser will be stored and processed by electronic dataprocessing to the extent that this is admissible in accordance with the Federal GermanLaw on Data Protection (§§ 28, 29 BDSG).
11.5 Should any provision of the agreement, the general sales, delivery and payment termsand conditions or other included terms and conditions be or become invalid, in wholeor in part, for any reasons whatsoever, or there is a whole, the validity of the remai-ning provisions shall not be affected thereby. The invalid provision shall be substitu-ted by a valid provision that comes as closely as legally permissible to what the inva-lid provision was intended to achieve.
General terms and conditionsGeneral Terms and Conditions
General Sales, Delivery and Payment Terms and Conditions
94 95
General business terms ..........................................................................................................................................................................................94 + 95
Automatic locking locks..........................................................................................................................................................................................10 - 15
Heavy duty mortise locks........................................................................................................................................................................................50 + 51
Warded insert ............................................................................................................................................................................................................ 73
Triple latch lock ......................................................................................................................................................................................................36 + 39
Mortise locks for internal doors ..............................................................................................................................................................................44 - 51
Latch fixing device...................................................................................................................................................................................................... 72
Fire rated door locks ..............................................................................................................................................................................................26 + 41
Index ........................................................................................................................................................................................................................4 - 7
Crank latchbolt .......................................................................................................................................................................................................... 73
Standards .................................................................................................................................................................................................................. 92
Contract mortise locks............................................................................................................................................................................................48 + 49
Swing door locks ....................................................................................................................................................................................................58 - 61
Product advice........................................................................................................................................................................................................72 + 73
Product information for locks..................................................................................................................................................................................88 - 91
Product features – mortise locks for fire rated doors ..............................................................................................................................................24 + 25
Product features – mortise locks for internal doors ................................................................................................................................................42 - 43
Product features – sliding door locks......................................................................................................................................................................52 + 53
Product features – Striking plates .............................................................................................................................................................................. 74
Product features – Safety locks ................................................................................................................................................................................8 + 9
Quality ........................................................................................................................................................................................................................ 93
Tube 9037 ..............................................................................................................................................................................................................34 + 35
Sliding door locks ..................................................................................................................................................................................................62 - 71
Strike plate B 9000 ................................................................................................................................................................................................75 + 78
Strike plate S204........................................................................................................................................................................................................ 79
Strike plate S241........................................................................................................................................................................................................ 79
Strike plate S350 ...................................................................................................................................................................................................... 80
Strike plate S500 ...................................................................................................................................................................................................... 80
Strike plate S400........................................................................................................................................................................................................ 8
Strike plate S401........................................................................................................................................................................................................ 82
Strike plate S403........................................................................................................................................................................................................ 83
Strike plate S404........................................................................................................................................................................................................ 83
Strike plate S407........................................................................................................................................................................................................ 84
Strike plate S411........................................................................................................................................................................................................ 84
Strike plate S412........................................................................................................................................................................................................ 85
Strike plate S413........................................................................................................................................................................................................ 85
Strike plate S440........................................................................................................................................................................................................ 86
Strike plate S441........................................................................................................................................................................................................ 86
Strike plate S448........................................................................................................................................................................................................ 87
Strike plate 2808........................................................................................................................................................................................................ 81
Strike plate 2809........................................................................................................................................................................................................ 81
Strike plate 2828........................................................................................................................................................................................................ 87
Lock 0010 ..............................................................................................................................................................................................................54 + 55
Lock 0024 ..............................................................................................................................................................................................................16 + 17
Lock 0055 ..............................................................................................................................................................................................................58 + 59
Lock 0215 ..............................................................................................................................................................................................................44 + 45
Lock 0216 ..............................................................................................................................................................................................................56 + 57
Lock 0353 + G353 ................................................................................................................................................................................................62 + 63
Lock 0371 ..............................................................................................................................................................................................................64 + 65
Lock 0372 ..............................................................................................................................................................................................................64 + 65
Lock 0375 .............................................................................................................................................................................................................66 + 67
Lock 0381H + 0381HF ..........................................................................................................................................................................................68 + 69
Lock 0393 ..............................................................................................................................................................................................................70 + 71
Lock 0415 ..............................................................................................................................................................................................................46 + 47
Lock 0515 ..............................................................................................................................................................................................................48 + 49
Lock 0615 ..............................................................................................................................................................................................................50 + 51
Lock 1058 ..............................................................................................................................................................................................................60 + 61
Lock 1125 ..............................................................................................................................................................................................................26 + 27
Lock 1206 ..............................................................................................................................................................................................................28 + 29
Lock 2327 ..............................................................................................................................................................................................................30 + 31
Lock 2338 ..............................................................................................................................................................................................................32 + 33
Lock 6031 ..............................................................................................................................................................................................................18 + 19
Lock 6043 ..............................................................................................................................................................................................................22 + 23
Lock 6065 ..............................................................................................................................................................................................................36 + 37
Lock 6138 ..............................................................................................................................................................................................................38 + 39
Lock 6206 ..............................................................................................................................................................................................................20 + 21
Lock 6306 ..............................................................................................................................................................................................................40 + 41
Lock 2114 – automatically locking ........................................................................................................................................................................14 + 15
Lock 2124 – automatically locking ........................................................................................................................................................................12 + 13
Lock 2154 – automatically locking ........................................................................................................................................................................10 + 11
Lock 2174 – manually locking................................................................................................................................................................................12 + 13
Shoot bolt lock 1795 ..............................................................................................................................................................................................34 + 35
Swiss round cylinder .................................................................................................................................................................................................. 73
Special locks ..........................................................................................................................................................................................................54 + 71
Radiation protection lock ........................................................................................................................................................................................20 + 21
Front bevels................................................................................................................................................................................................................ 72
Door handling ............................................................................................................................................................................................................ 72
Connecting rod ......................................................................................................................................................................................................38 + 39
Internal door locks..................................................................................................................................................................................................44 - 47
Gretsch-Unitas GmbHBaubeschlägeJohann-Maus-Str. 371254 DitzingenTelephone: +49 (0)7156 301 - 0Fax: +49 (0)7156 301 - [email protected] W
023
0 00
02a
03/
2004
m
y P
rinte
d in
Ger
man
y
BKS GmbHHeidestr. 7142549 VelbertTelephone: +46 (0)2051 201 - 0Fax: +49 (0)2051 201 - 431www.bks.de