Upload
maximiliano-garcia-calderon
View
59
Download
6
Tags:
Embed Size (px)
Citation preview
Mini Sub Socket Weld Gauge Mini Sub Socket Weld Gauge #Gal-14
• Check Throat Dimensions - Sliding Pointer
• Check Lag Length
• Check All Pipe Schedule - Sliding Pointer
• All Stainless Steel
Mini Fillet Weld Keys Mini Fillet Weld Keys (11 sizes) Gal-16 Pocket size- Handy key chain holds set together
• Measures Fillet Weld Leg
• Measures Fillet Weld Throat
• 11 Different Sizes (Standard & Metric)
• All Gauges Stainless Steel
Pipe Pit Gauge Pipe Pit Gauge Gal-17
• Range os 0 to ½" in 1/64 & .020 increments
• Arm can be locked in place at any dimension
• All Stainless Steel
• Gauge fits in shirt pocket and comes with pocket protector
• Has handy formulas on front and decimal equivilents on back
Digital Weld Gauge NEW GAGE!! Digital Weld Gauge Gal-18 Abilities:
• Holds either the zero settings or measured value at any position for differential measurements
• Has a serial output to interface with a computer or printer to process data.
• Automatically turns on by moving the main scale or by pressing ON/OFF key.
• Automatically turns off after 4 minutes of inactivity..conserving power.
Features:
• Measures Butt Weld Reinforcement and Throat
• Slider Clamp Screw
• Output Connector
• LCD Display
• Hold Switch
• IN/MM Switch
• ON/OFF Switch
• Case and Battery Included
1/32 to 5/8 Taper Gauge Gal-28A 1/32 to 5/8 Taper Gauge
• Stainless Steel
• All increments permanently engraved
• Front side - Standard
• Back side - Metric
5/8 to 1 3/16 Taper Gauge Gal-28B 5/8 to 1& 3/16 Taper Gauge
• Stainless Steel
• All increments permanently engraved
• Front side - Standard
• Back side - Metric
1&3/16 to 2" Taper Gauge Gal-28C 1 & 3/16 to 2" Taper Gauge
• Stainless Steel
• All increments permanently engraved
• Front side - Standard
• Back side - Metric
Mini Pipe Gap-Clamps Model 1 #GAL GAP-1 - Mini Pipe Gap-Clamps Model 1 for up to 8" pipe. • All Mini Pipe Gap-Clamps are designed to position and hold open butt pipe spools to one another while those pieces are tack welded. Perfect for the welder working alone. • These Mini Gap-Clamps have been redesigned for ease in aligning and gapping at the same time. • They come 4 to a set, which includes a belt pouch for ease in carrying to the workplace, scaffolding, etc. • This design has been field proven, clamps are sturdy and with a minimum of maintenance, and may be used over and over for years. • Clamps made of stainless steel & brass.
Mini Pipe Gap-Clamps Model 2 #GAL GAP-2 - Mini Pipe Gap-Clamps Model 2 for up to 4" pipe. All Mini Pipe Gap-Clamps are designed to position and hold open butt pipe spools to one another while those pieces are tack welded. Perfect for the welder working alone. These Mini Gap-Clamps have been redesigned for ease in aligning and gapping at the same time. They come 4 to a set, which includes a belt pouch for ease in carrying to the workplace, scaffolding, etc. This design has been field proven, clamps are sturdy and with a minimum of maintenance, and may be used over and over for years. Clamps made of stainless steel & brass.
HI-LO Welding Gage Measures Hi-Lo Gauge Gal-1 • Slim design is 30% lighter! • Measures internal misalignment of pipe before and after tacking. • Measurements read in standard on one side & metric on opposite side. • This handy devise even measures scribe lines, crown height & weld fillet. • Measures internal alignment of pipe after fit-up/alignment, and cuts radiographic rejects.
Single Purpose Hi-Lo Gauge (English) Single Purpose Hi-Lo Gauge (English) Gal-2
• Standard/English Gauge
• Eliminates rejects, improves productiivity
• 1/32 or Zero Line
• Check Rootweld Space
• Checks Internal Misalignment
Adjustable Fillet Weld Gauge
Features:
• The Adjustable Fillet Weld Gauge can measure any fillet weld to 1/32” accuracy with just one simple-to-use gauge.
• Now you can measure fillet welds from 1/8” to 1” (with ± 1/32” accuracy) with one economical, simple to understand gauge.
• The G.A.L. Adjustable Fillet Weld Gauge uses an offset arm that slides at a 45° angle to make fillet weld length measurements.
• The gauge is calibrated to 32nds, with metric equivalents given, so you get more accurate readings.
• Four screws hold the offset arm in position for future adjustments.
• This gauge also measures weld throat thickness to 1/16th of an inch.
• Made of durable, rust resistant stainless steel
• It’s 2¼” x 3” slim design weighs only 1½ oz & fits easily into a shirt pocket.
• Measures both leg lengths and weld throat fillet weld thickness.
Bridgecam Gauge #GAL-4 - Bridgecam Gauge The following measurements are possible either in inches or millimeters with the Bridgecam Gauge: • Angle of preparation, 0º to 60º • Excess weld metal (capping size) • Depth of undercut • Depth of pitting • Fillet weld throat size • Fillet weld length • Misalignment (high-low)
Pocket Bridgecam Gauge Pocket Bridgecam Gauge Gal-4a The following measurements are possible either in inches or millimeters with the Pocket Bridgecam Gauge:
• Angle of preparation, 0º to 60º
• Excess weld metal (capping size)
• Depth of undercut by 1/32
• Depth of pitting 1/32
• Fillet weld throat size1/64 or .5mm
• Fillet weld length
• Misalignment (high-low)
• All stainless steel construction
V-WAC Weld Gauge V-WAC Weld Gauge Gal-5
• Checks undercut
• Crown Height
• Porosity & Pits
• Metric or English
• Quality stainless steel construction
A.W.S. Weld Gauge A.W.S. (Auto Weld Size) Weld Gauge
• Pocket sized
• Quality stainless steel construction
• Used to determine size of a fillet weld
• Checks permissible tolerance of convexity, concavity, and underfill
• Checks permissible tolerance of reinforcement
WTPS Gauge WTPS Gauge Gal-7 Measure Undercut. Undercut will be No more than .010 deep when the weld is transverse to the primary stress in the part that is undercut.
• Precision Made from Stainless steel
• All markings & dimensions are laser engraved
• Gauge set comes with a preciaion ground calibration block, ground to .0005 tolerance for accuracy
Fillet Weld Gauge Set Fillet Weld Gauge Set (7pcs) Gal-8a
• Quality stainless steel construction
• Knurled nut holds set together
• Allows fast accurate measurement of (11) different fillet weld sizes; concave or convex
• Sizes and numerals are etched into both sides for easy reading
Skew-T Fillet Weld Gauge Skew-T Fillet Weld Gauge Gal-9a
• Check Angle of Vertical Member
• Checks Weld Acute Side
• Checks Weld Ontuse Side
• Measures in English & Metric
Skew-T Fillet Weld Calculator Skew-T Fillet Weld Calculator
• A handy compliation of mathematical relationships between: Leg Length • Throats • Skew Angles and Inspection Dimensions.
• A must for designers and inspectors. • The perfect companion to the G.A.L. Skew-T Fillet Weld Gauge
Skew-T Fillet Weld Gauge with Calculator Skew-T Fillet Weld Gauge with Calculator Skew-T Fillet Weld Gauge
• Check Angle of Vertical Member
• Checks Weld Acute Side
• Checks Weld Ontuse Side
• Measures in English & Metric
Skew-T Fillet Weld Calculator
• A handy compliation of mathematical relationships between: Leg Length • Throats • Skew Angles and Inspection Dimensions.
• A must for designers and inspectors.
Pocket Fillet Weld Gauge Set
Pocket Fillet Weld Gauge Set (3 Pcs) Gal-10
• Pocket size - Measures 8 Size Fillets
• Checks leg length, throat size, plus allowable convexity
• All increments permanently engraved (Standard & Metric)
• Handy key chain holds set together
Inspection Tool Kit: Wrap-Around Pouch
#GAL-12 - Inspection Tool Kit with Wrap-Around Pouch.
This Kit comes with:
• Hi-Lo Gage
• Telescoping Oval Mirror
• Flashlight
• Fillet Weld Gages
• Chrome Rule
Dial / Pit Depth Gauge
Dial / Pit Depth Gauge Gal-13
Combination 0" - 10" Dial/Pit Depth Gauge
• Graduations 0.001"
• Accuracy meets or exceeds federal specs
• Continuous diam for ½" travel
• Revolution Counter
• Uniform pressure over full range of travel
• Complete with 6 extensions rods in fitted case
• Micro probes for small diameter pits 0.062 to 0.025
• Interchangeable bases